6.477 results (0,24479 seconds)

Show all filters

Brand

Show all

Colour

Show all

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

SCHOLZ Tyre Shelf Unit, Zinc Plated, Single Sided, 3 Levels, Extension Shelf Unit

SCHOLZ Tyre Shelf Unit, Zinc Plated, Single Sided, 3 Levels, Extension Shelf Unit

Tyre shelf unit, zinc plated, single sided, 3 levels, extension shelf unit. Supplied = flat pack. Shelf unit type = extension unit. Shelf unit design = single sided. Shelf unit height = 2280 mm. Overall width = 1030 mm. Overall depth = 320 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 3 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 12 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: For single shelf units from 4 levels, the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. The included assembly and installation instructions must be observed. Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 249.99
1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Single Sided, 3 Levels, Standard Shelf Unit

SCHOLZ Tyre Shelf Unit, Zinc Plated, Single Sided, 3 Levels, Standard Shelf Unit

Tyre shelf unit, zinc plated, single sided, 3 levels, standard shelf unit. Supplied = flat pack. Shelf unit type = standard unit. Shelf unit design = single sided. Shelf unit height = 2280 mm. Overall width = 1070 mm. Overall depth = 320 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 3 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 12 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: For single shelf units from 4 levels, the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. The included assembly and installation instructions must be observed. Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 319.99
1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Single Sided, 4 Levels, Extension Shelf Unit

SCHOLZ Tyre Shelf Unit, Zinc Plated, Single Sided, 4 Levels, Extension Shelf Unit

Tyre shelf unit, zinc plated, single sided, 4 levels, extension shelf unit. Supplied = flat pack. Shelf unit type = extension unit. Shelf unit design = single sided. Shelf unit height = 3000 mm. Overall width = 1030 mm. Overall depth = 320 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 4 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 16 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: For single shelf units from 4 levels, the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. The included assembly and installation instructions must be observed. Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 359.99
1

EUROKRAFTpro Shelf For Pallet Shelf Unit, Moulded Chipboard, For Beam Length 1825mm, Shelf Unit Depth 750mm

EUROKRAFTpro Shelf For Pallet Shelf Unit, Moulded Chipboard, For Beam Length 1825mm, Shelf Unit Depth 750mm

Shelf for pallet shelf unit, moulded chipboard, for beam length 1825 mm, shelf unit depth 750 mm. Supplied = flat pack. For depth = 750 mm. Shelf design = complete shelves, without beams. Material = V20, E1 chipboard. Max. load = 725 kg. Shelf thickness = 38 mm. For beam length = 1825 mm. Product type = accessories for pallet racking. For storing items without pallets. The specified maximum loads must always be considered together with the max. upright load and max. bay load of the pallet racking units, and are applicable for evenly distributed loads. High density - grade V20 E1 - thickness 38 mm. Placed on the support beams. Secured with 4 zinc plated brackets (included in price) Please specify the support beam profile when ordering. The prices stated do not include the cost of beams. Please specify the support profile when ordering. High density - grade V20 E1 - thickness 38 mm. Placed on the support beams. Secured with 4 zinc plated brackets (included in price) Please specify the support beam profile when ordering.

GBP 299.99
1

EUROKRAFTpro Shelf For Pallet Shelf Unit, Moulded Chipboard, For Beam Length 2700mm, Shelf Unit Depth 750mm

EUROKRAFTpro Shelf For Pallet Shelf Unit, Moulded Chipboard, For Beam Length 2700mm, Shelf Unit Depth 750mm

Shelf for pallet shelf unit, moulded chipboard, for beam length 2700 mm, shelf unit depth 750 mm. Supplied = flat pack. For depth = 750 mm. Shelf design = complete shelves, without beams. Material = V20, E1 chipboard. Max. load = 1075 kg. Shelf thickness = 38 mm. For beam length = 2700 mm. Product type = accessories for pallet racking. For storing items without pallets. The specified maximum loads must always be considered together with the max. upright load and max. bay load of the pallet racking units, and are applicable for evenly distributed loads. High density - grade V20 E1 - thickness 38 mm. Placed on the support beams. Secured with 4 zinc plated brackets (included in price) Please specify the support beam profile when ordering. The prices stated do not include the cost of beams. Please specify the support profile when ordering. High density - grade V20 E1 - thickness 38 mm. Placed on the support beams. Secured with 4 zinc plated brackets (included in price) Please specify the support beam profile when ordering.

GBP 349.99
1

EUROKRAFTpro Shelf For Pallet Shelf Unit, Moulded Chipboard, For Beam Length 2700mm, Shelf Unit Depth 900mm

EUROKRAFTpro Shelf For Pallet Shelf Unit, Moulded Chipboard, For Beam Length 2700mm, Shelf Unit Depth 900mm

Shelf for pallet shelf unit, moulded chipboard, for beam length 2700 mm, shelf unit depth 900 mm. Supplied = flat pack. For depth = 900 mm. Shelf design = complete shelves, without beams. Material = V20, E1 chipboard. Max. load = 825 kg. Shelf thickness = 38 mm. For beam length = 2700 mm. Product type = accessories for pallet racking. For storing items without pallets. The specified maximum loads must always be considered together with the max. upright load and max. bay load of the pallet racking units, and are applicable for evenly distributed loads. High density - grade V20 E1 - thickness 38 mm. Placed on the support beams. Secured with 4 zinc plated brackets (included in price) Please specify the support beam profile when ordering. The prices stated do not include the cost of beams. Please specify the support profile when ordering. High density - grade V20 E1 - thickness 38 mm. Placed on the support beams. Secured with 4 zinc plated brackets (included in price) Please specify the support beam profile when ordering.

GBP 399.99
1

EUROKRAFTpro Shelf For Pallet Shelf Unit, Moulded Chipboard, For Beam Length 1825mm, Shelf Unit Depth 1100mm

EUROKRAFTpro Shelf For Pallet Shelf Unit, Moulded Chipboard, For Beam Length 1825mm, Shelf Unit Depth 1100mm

Shelf for pallet shelf unit, moulded chipboard, for beam length 1825 mm, shelf unit depth 1100 mm. Supplied = flat pack. For depth = 1100 mm. Shelf design = complete shelves, without beams. Material = V20, E1 chipboard. Max. load = 600 kg. Shelf thickness = 38 mm. For beam length = 1825 mm. Product type = accessories for pallet racking. For storing items without pallets. The specified maximum loads must always be considered together with the max. upright load and max. bay load of the pallet racking units, and are applicable for evenly distributed loads. High density - grade V20 E1 - thickness 38 mm. Placed on the support beams. Secured with 4 zinc plated brackets (included in price) Please specify the support beam profile when ordering. The prices stated do not include the cost of beams. Please specify the support profile when ordering. High density - grade V20 E1 - thickness 38 mm. Placed on the support beams. Secured with 4 zinc plated brackets (included in price) Please specify the support beam profile when ordering.

GBP 349.99
1

EUROKRAFTpro Shelf For Pallet Shelf Unit, Moulded Chipboard, For Beam Length 1825mm, Shelf Unit Depth 900mm

EUROKRAFTpro Shelf For Pallet Shelf Unit, Moulded Chipboard, For Beam Length 1825mm, Shelf Unit Depth 900mm

Shelf for pallet shelf unit, moulded chipboard, for beam length 1825 mm, shelf unit depth 900 mm. Supplied = flat pack. For depth = 900 mm. Shelf design = complete shelves, without beams. Material = V20, E1 chipboard. Max. load = 550 kg. Shelf thickness = 38 mm. For beam length = 1825 mm. Product type = accessories for pallet racking. For storing items without pallets. The specified maximum loads must always be considered together with the max. upright load and max. bay load of the pallet racking units, and are applicable for evenly distributed loads. High density - grade V20 E1 - thickness 38 mm. Placed on the support beams. Secured with 4 zinc plated brackets (included in price) Please specify the support beam profile when ordering. The prices stated do not include the cost of beams. Please specify the support profile when ordering. High density - grade V20 E1 - thickness 38 mm. Placed on the support beams. Secured with 4 zinc plated brackets (included in price) Please specify the support beam profile when ordering.

GBP 309.99
1

Durable Name Badge With Retractable String, HxW 60 X 90mm, Pack Of 30, Length 800mm

Durable Name Badge With Retractable String, HxW 60 X 90mm, Pack Of 30, Length 800mm

Name badge with retractable string, HxW 60 x 90 mm, pack of 30, length 800 mm. Supplied = assembled. Height = 60 mm. Width = 90 mm. Material = hard foil. Type of mounting = retractable string with clip. Colour = transparent. Product type = name badges with retractable string. Closed model to protect the insert. Combined with a retractable string with a metal clip on the back and press stud loop. Length 800 mm.

GBP 179.99
1

HOFE Slanted Shelf Unit - Shelf Unit Height 2000mm - Shelf Width 1000mm, Extension Shelf Unit, Zinc Plated

HOFE Slanted Shelf Unit - Shelf Unit Height 2000mm - Shelf Width 1000mm, Extension Shelf Unit, Zinc Plated

Slanted shelf unit, shelf unit height 2000 mm, shelf width 1000 mm, extension shelf unit, zinc plated. Supplied = flat pack. Shelf unit height = 2000 mm. Overall width = 1010 mm. Overall depth = 535 mm. Shelf width = 1000 mm. Shelf depth = 600 mm. Max. bay load = 300 kg. Number of levels = 3 pcs. Material = steel. Finish = zinc plated. Shelf height adjustment increments = 25 mm. Design = plug in. Colour = zinc plated. Max. shelf load = 100 kg. Product type = sloping shelves. For quick access - directly at the workstation. External dimensions Overall width Standard shelf unit + 60 mm Extension shelf unit + 10 mm 3 inclined shelves , 25 mm adjustment grid, angle of inclination approx. 34 55 mm high cross beams serve as end-stop at front. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 429.99
1

HOFE Slanted Shelf Unit - Shelf Unit Height 2000mm - Shelf Width 1000mm, Standard Shelf Unit, Zinc Plated

HOFE Slanted Shelf Unit - Shelf Unit Height 2000mm - Shelf Width 1000mm, Standard Shelf Unit, Zinc Plated

Slanted shelf unit, shelf unit height 2000 mm, shelf width 1000 mm, standard shelf unit, zinc plated. Supplied = flat pack. Shelf unit height = 2000 mm. Overall width = 1060 mm. Overall depth = 535 mm. Shelf width = 1000 mm. Shelf depth = 600 mm. Max. bay load = 300 kg. Number of levels = 3 pcs. Material = steel. Finish = zinc plated. Shelf height adjustment increments = 25 mm. Design = plug in. Colour = zinc plated. Max. shelf load = 100 kg. Product type = sloping shelves. For quick access - directly at the workstation. External dimensions Overall width Standard shelf unit + 60 mm Extension shelf unit + 10 mm 3 inclined shelves , 25 mm adjustment grid, angle of inclination approx. 34 55 mm high cross beams serve as end-stop at front. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 419.99
1

LACONT Shelf, Type 90, Max. Load 75 Kg, For Width 1400mm

LACONT Shelf, Type 90, Max. Load 75 Kg, For Width 1400mm

Shelf, type 90, max. load 75 kg, for width 1400 mm. Supplied = assembled. Width = 1295 mm. Depth = 409 mm. For width = 1400 mm. Material = sheet steel. Colour = light grey RAL 7035. Max. load = 75 kg. Shelf thickness = 30 mm. Product type = accessories for fire resistant hazardous goods storage cupboards. As an additional storage level or as a spare shelf. Includes 4 support brackets and 4 securing screws. The specified max. loads apply with uniform load distribution.

GBP 209.99
1