mcb.dk | Få success online

SCHOLZ Tyre Shelf Unit, Zinc Plated, Single Sided, 6 Levels, Extension Shelf Unit

Tyre shelf unit, zinc plated, single sided, 6 levels, extension shelf unit. Supplied = flat pack. Shelf unit type = extension unit. Shelf unit design = single sided. Shelf unit height = 4380 mm. Overall width = 1030 mm. Overall depth = 320 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 6 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 24 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: For single shelf units from 4 levels, the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. The included assembly and installation instructions must be observed. Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 899.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Single Sided, 6 Levels, Standard Shelf Unit

Tyre shelf unit, zinc plated, single sided, 6 levels, standard shelf unit. Supplied = flat pack. Shelf unit type = standard unit. Shelf unit design = single sided. Shelf unit height = 4380 mm. Overall width = 1070 mm. Overall depth = 320 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 6 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 24 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: For single shelf units from 4 levels, the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. The included assembly and installation instructions must be observed. Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 1329.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Single Sided, 5 Levels, Extension Shelf Unit

Tyre shelf unit, zinc plated, single sided, 5 levels, extension shelf unit. Supplied = flat pack. Shelf unit type = extension unit. Shelf unit design = single sided. Shelf unit height = 3660 mm. Overall width = 1030 mm. Overall depth = 320 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 5 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 20 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: For single shelf units from 4 levels, the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. The included assembly and installation instructions must be observed. Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 699.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Single Sided, 4 Levels, Standard Shelf Unit

Tyre shelf unit, zinc plated, single sided, 4 levels, standard shelf unit. Supplied = flat pack. Shelf unit type = standard unit. Shelf unit design = single sided. Shelf unit height = 3000 mm. Overall width = 1070 mm. Overall depth = 320 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 4 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 16 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: For single shelf units from 4 levels, the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. The included assembly and installation instructions must be observed. Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 449.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Single Sided, 5 Levels, Standard Shelf Unit

Tyre shelf unit, zinc plated, single sided, 5 levels, standard shelf unit. Supplied = flat pack. Shelf unit type = standard unit. Shelf unit design = single sided. Shelf unit height = 3660 mm. Overall width = 1070 mm. Overall depth = 320 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 5 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 20 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: For single shelf units from 4 levels, the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. The included assembly and installation instructions must be observed. Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 1049.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Single Sided, 7 Levels, Extension Shelf Unit

Tyre shelf unit, zinc plated, single sided, 7 levels, extension shelf unit. Supplied = flat pack. Shelf unit type = extension unit. Shelf unit design = single sided. Shelf unit height = 5100 mm. Overall width = 1030 mm. Overall depth = 320 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 7 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 28 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: For single shelf units from 4 levels, the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. The included assembly and installation instructions must be observed. Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 999.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Single Sided, 7 Levels, Standard Shelf Unit

Tyre shelf unit, zinc plated, single sided, 7 levels, standard shelf unit. Supplied = flat pack. Shelf unit type = standard unit. Shelf unit design = single sided. Shelf unit height = 5100 mm. Overall width = 1070 mm. Overall depth = 320 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 7 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 28 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: For single shelf units from 4 levels, the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. The included assembly and installation instructions must be observed. Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 1529.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Block Shelf Unit, 7 Levels, Standard Shelf Unit

Tyre shelf unit, zinc plated, block shelf unit, 7 levels, standard shelf unit. Supplied = flat pack. Shelf unit type = standard unit. Shelf unit design = block shelf unit. Shelf unit height = 5100 mm. Overall width = 1070 mm. Overall depth = 2340 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 7 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 112 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: Block shelf units must be bolted to the floor using the wall and floor anchoring utensils (suitable for screed and concrete) Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 3999.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Block Shelf Unit, 6 Levels, Extension Shelf Unit

Tyre shelf unit, zinc plated, block shelf unit, 6 levels, extension shelf unit. Supplied = flat pack. Shelf unit type = extension unit. Shelf unit design = block shelf unit. Shelf unit height = 4380 mm. Overall width = 1030 mm. Overall depth = 2340 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 6 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 96 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: Block shelf units must be bolted to the floor using the wall and floor anchoring utensils (suitable for screed and concrete) Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 2999.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Block Shelf Unit, 4 Levels, Extension Shelf Unit

Tyre shelf unit, zinc plated, block shelf unit, 4 levels, extension shelf unit. Supplied = flat pack. Shelf unit type = extension unit. Shelf unit design = block shelf unit. Shelf unit height = 3000 mm. Overall width = 1030 mm. Overall depth = 2340 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 4 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 64 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: Block shelf units must be bolted to the floor using the wall and floor anchoring utensils (suitable for screed and concrete) Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 1399.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Block Shelf Unit, 4 Levels, Standard Shelf Unit

Tyre shelf unit, zinc plated, block shelf unit, 4 levels, standard shelf unit. Supplied = flat pack. Shelf unit type = standard unit. Shelf unit design = block shelf unit. Shelf unit height = 3000 mm. Overall width = 1070 mm. Overall depth = 2340 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 4 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 64 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: Block shelf units must be bolted to the floor using the wall and floor anchoring utensils (suitable for screed and concrete) Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 2399.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Block Shelf Unit, 3 Levels, Standard Shelf Unit

Tyre shelf unit, zinc plated, block shelf unit, 3 levels, standard shelf unit. Supplied = flat pack. Shelf unit type = standard unit. Shelf unit design = block shelf unit. Shelf unit height = 2280 mm. Overall width = 1070 mm. Overall depth = 2340 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 3 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 48 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: Block shelf units must be bolted to the floor using the wall and floor anchoring utensils (suitable for screed and concrete) Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 1799.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Block Shelf Unit, 7 Levels, Extension Shelf Unit

Tyre shelf unit, zinc plated, block shelf unit, 7 levels, extension shelf unit. Supplied = flat pack. Shelf unit type = extension unit. Shelf unit design = block shelf unit. Shelf unit height = 5100 mm. Overall width = 1030 mm. Overall depth = 2340 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 7 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 112 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: Block shelf units must be bolted to the floor using the wall and floor anchoring utensils (suitable for screed and concrete) Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 3599.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Block Shelf Unit, 3 Levels, Extension Shelf Unit

Tyre shelf unit, zinc plated, block shelf unit, 3 levels, extension shelf unit. Supplied = flat pack. Shelf unit type = extension unit. Shelf unit design = block shelf unit. Shelf unit height = 2280 mm. Overall width = 1030 mm. Overall depth = 2340 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 3 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 48 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: Block shelf units must be bolted to the floor using the wall and floor anchoring utensils (suitable for screed and concrete) Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 1499.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Block Shelf Unit, 5 Levels, Standard Shelf Unit

Tyre shelf unit, zinc plated, block shelf unit, 5 levels, standard shelf unit. Supplied = flat pack. Shelf unit type = standard unit. Shelf unit design = block shelf unit. Shelf unit height = 3660 mm. Overall width = 1070 mm. Overall depth = 2340 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 5 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 80 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: Block shelf units must be bolted to the floor using the wall and floor anchoring utensils (suitable for screed and concrete) Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 2999.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Block Shelf Unit, 6 Levels, Standard Shelf Unit

Tyre shelf unit, zinc plated, block shelf unit, 6 levels, standard shelf unit. Supplied = flat pack. Shelf unit type = standard unit. Shelf unit design = block shelf unit. Shelf unit height = 4380 mm. Overall width = 1070 mm. Overall depth = 2340 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 6 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 96 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: Block shelf units must be bolted to the floor using the wall and floor anchoring utensils (suitable for screed and concrete) Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 3599.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Block Shelf Unit, 5 Levels, Extension Shelf Unit

Tyre shelf unit, zinc plated, block shelf unit, 5 levels, extension shelf unit. Supplied = flat pack. Shelf unit type = extension unit. Shelf unit design = block shelf unit. Shelf unit height = 3660 mm. Overall width = 1030 mm. Overall depth = 2340 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 5 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 80 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: Block shelf units must be bolted to the floor using the wall and floor anchoring utensils (suitable for screed and concrete) Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 2399.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Double Sided, 5 Levels, Extension Shelf Unit

Tyre shelf unit, zinc plated, double sided, 5 levels, extension shelf unit. Supplied = flat pack. Shelf unit type = extension unit. Shelf unit design = double sided. Shelf unit height = 3660 mm. Overall width = 1030 mm. Overall depth = 1060 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 5 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 40 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: Double shelf units must be bolted to the floor using the wall and floor anchoring utensils (suitable for screed and concrete) Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 1199.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Double Sided, 4 Levels, Extension Shelf Unit

Tyre shelf unit, zinc plated, double sided, 4 levels, extension shelf unit. Supplied = flat pack. Shelf unit type = extension unit. Shelf unit design = double sided. Shelf unit height = 3000 mm. Overall width = 1030 mm. Overall depth = 1060 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 4 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 32 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: Double shelf units must be bolted to the floor using the wall and floor anchoring utensils (suitable for screed and concrete) Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 849.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Double Sided, 6 Levels, Extension Shelf Unit

Tyre shelf unit, zinc plated, double sided, 6 levels, extension shelf unit. Supplied = flat pack. Shelf unit type = extension unit. Shelf unit design = double sided. Shelf unit height = 4380 mm. Overall width = 1030 mm. Overall depth = 1060 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 6 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 48 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: Double shelf units must be bolted to the floor using the wall and floor anchoring utensils (suitable for screed and concrete) Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 1399.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Double Sided, 4 Levels, Standard Shelf Unit

Tyre shelf unit, zinc plated, double sided, 4 levels, standard shelf unit. Supplied = flat pack. Shelf unit type = standard unit. Shelf unit design = double sided. Shelf unit height = 3000 mm. Overall width = 1070 mm. Overall depth = 1060 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 4 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 32 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: Double shelf units must be bolted to the floor using the wall and floor anchoring utensils (suitable for screed and concrete) Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 999.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Double Sided, 3 Levels, Standard Shelf Unit

Tyre shelf unit, zinc plated, double sided, 3 levels, standard shelf unit. Supplied = flat pack. Shelf unit type = standard unit. Shelf unit design = double sided. Shelf unit height = 2280 mm. Overall width = 1070 mm. Overall depth = 1060 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 3 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 24 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: Double shelf units must be bolted to the floor using the wall and floor anchoring utensils (suitable for screed and concrete) Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 729.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Double Sided, 5 Levels, Standard Shelf Unit

Tyre shelf unit, zinc plated, double sided, 5 levels, standard shelf unit. Supplied = flat pack. Shelf unit type = standard unit. Shelf unit design = double sided. Shelf unit height = 3660 mm. Overall width = 1070 mm. Overall depth = 1060 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 5 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 40 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: Double shelf units must be bolted to the floor using the wall and floor anchoring utensils (suitable for screed and concrete) Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 1839.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Double Sided, 3 Levels, Extension Shelf Unit

Tyre shelf unit, zinc plated, double sided, 3 levels, extension shelf unit. Supplied = flat pack. Shelf unit type = extension unit. Shelf unit design = double sided. Shelf unit height = 2280 mm. Overall width = 1030 mm. Overall depth = 1060 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 3 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 24 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: Double shelf units must be bolted to the floor using the wall and floor anchoring utensils (suitable for screed and concrete) Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 599.99

1

SCHOLZ Tyre Shelf Unit, Zinc Plated, Double Sided, 6 Levels, Standard Shelf Unit

Tyre shelf unit, zinc plated, double sided, 6 levels, standard shelf unit. Supplied = flat pack. Shelf unit type = standard unit. Shelf unit design = double sided. Shelf unit height = 4380 mm. Overall width = 1070 mm. Overall depth = 1060 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 6 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 48 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: Double shelf units must be bolted to the floor using the wall and floor anchoring utensils (suitable for screed and concrete) Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

GBP 2099.99

1

DIGITAL MARKETING

Brand

Colour

Size

Merchant

Price (EUR)