mcb.dk | Få success online

Fascia End Cap - 300mm White Woodgrain

End caps work by sealing off the cellular core of the cut board that is exposed and are commonly used when the fascia board does not terminate at a corner. It is recommended to use a hacksaw to trim the end cap to match the fascia board size and fix it in place with superglue. Freefoamand#039;s replacement fascia end cap is 300mm in length.

GBP 7.58

1

Fascia End Cap - 300mm Black Smooth

End caps work by sealing off the cellular core of the cut board that is exposed and are commonly used when the fascia board does not terminate at a corner. It is recommended to use a hacksaw to trim the end cap to match the fascia board size and fix it in place with superglue. Freefoamand#039;s replacement fascia end cap is 300mm in length.

GBP 6.01

1

Fascia End Cap - 315mm White

End caps are used to seal off the cellular core of any cut board that is exposed, ie. where it is not covered by a joint or corner trim.End caps can be cut to size with a hacksaw as required. They are fixed to the end of the board using our industrial superglue and activator.

GBP 3.37

1

Fascia End Cap - 300mm Chartwell Green Woodgrain

End caps work by sealing off the cellular core of the cut board that is exposed and are commonly used when the fascia board does not terminate at a corner. It is recommended to use a hacksaw to trim the end cap to match the fascia board size and fix it in place with superglue. Freefoamand#039;s replacement fascia end cap is 300mm in length.

GBP 7.58

1

Fascia End Cap - 300mm Anthracite Grey Smooth

End caps work by sealing off the cellular core of the cut board that is exposed and are commonly used when the fascia board does not terminate at a corner. It is recommended to use a hacksaw to trim the end cap to match the fascia board size and fix it in place with superglue. Freefoamand#039;s replacement fascia end cap is 300mm in length.

GBP 7.21

1

Stainless Steel Balustrade Scroll End - 48.3mm Diameter

Scroll End designed to be used with Ecoscape balustrade systems.

GBP 21.90

1

Fascia End Cap - 300mm Dark Grey Smooth

End caps work by sealing off the cellular core of the cut board that is exposed and are commonly used when the fascia board does not terminate at a corner. It is recommended to use a hacksaw to trim the end cap to match the fascia board size and fix it in place with superglue. Freefoamand#039;s fascia end cap is 300mm in length and is coated in a smooth dark grey.

GBP 7.21

1

White Fascia Capping Board End Cap - 50mm

End caps are used to seal off the cellular core of any cut board that is exposed, ie. where it is not covered by a joint or corner trim. 50mm end caps are most commonly used when the board itself is being used as an internal window board rather than a fascia board.End caps can be cut to size with a hacksaw as required. They are fixed to the end of the board using our industrial superglue and activator.

GBP 1.18

1

Rosewood Fascia Capping Board End Cap - 50mm

End caps are used to seal off the cellular core of any cut board that is exposed, ie. where it is not covered by a joint or corner trim.50mm end caps are most commonly used when the board itself is being used as an internal window board rather than a fascia board.End caps can be cut to size with a hacksaw as required. They are fixed to the end of the board using our industrial superglue and activator.

GBP 5.14

1

Ogee Fascia Box End Cover - 60mm x 404mm White

Ogee Box end covers are used to cover the cut edge of the box end board when constructing the eaves detail at the point where the fascia board meets the barge board.

GBP 18.43

1

Fibre Cement Cladding Aluminium End Profile - 3mtr Black

Used to finish the end of a cladding run, the finish is easily obtained by using a Cembrit End Profile. There must be a minimum of 5mm clearance from the plank/panel to the profile, allowing proper water drainage.

GBP 25.37

1

Fibre Cement Cladding Aluminium End Profile - 3mtr White

Used to finish the end of a cladding run, the finish is easily obtained by using a Cembrit End Profile. There must be a minimum of 5mm clearance from the plank/panel to the profile, allowing proper water drainage.

GBP 25.37

1

Stainless Steel Balustrade Flat End Cap - 48.3mm Diameter

End Cap Flat Top designed to be used with Ecoscape balustrade systems.

GBP 5.54

1

Black Ash Fascia Capping Board End Cap - 50mm

End caps are used to seal off the cellular core of any cut board that is exposed, ie. where it is not covered by a joint or corner trim.50mm end caps are most commonly used when the board itself is being used as an internal window board rather than a fascia board.End caps can be cut to size with a hacksaw as required. They are fixed to the end of the board using our industrial superglue and activator.

GBP 4.28

1

Fibre Cement Cladding Aluminium End Profile - 3mtr Agate Grey

Used to finish the end of a cladding run, the finish is easily obtained by using a Cembrit End Profile. There must be a minimum of 5mm clearance from the plank/panel to the profile, allowing proper water drainage.

GBP 25.37

1

Fibre Cement Cladding Aluminium End Profile - 3mtr Granite Grey

Used to finish the end of a cladding run, the finish is easily obtained by using a Cembrit End Profile. There must be a minimum of 5mm clearance from the plank/panel to the profile, allowing proper water drainage.

GBP 25.37

1

Fibre Cement Cladding Aluminium End Profile - 3mtr Anthracite Grey

Used to finish the end of a cladding run, the finish is easily obtained by using a Cembrit End Profile. There must be a minimum of 5mm clearance from the plank/panel to the profile, allowing proper water drainage.

GBP 25.37

1

FloPlast Fascia End Cap - 315mm Golden Oak

End caps are used to seal off the cellular core of any cut board that is exposed, ie. where it is not covered by a joint or corner trim.End caps can be cut to size with a hacksaw as required. They are fixed to the end of the board using our industrial superglue and activator.

GBP 5.70

1

FloPlast Fascia End Cap - 315mm Black Ash Woodgrain

End caps are used to seal off the cellular core of any cut board that is exposed, ie. where it is not covered by a joint or corner trim.End caps can be cut to size with a hacksaw as required. They are fixed to the end of the board using our industrial superglue and activator.

GBP 5.70

1

Fascia End Cap - 300mm Storm Grey Smooth

End caps work by sealing off the cellular core of the cut board that is exposed and are commonly used when the fascia boards does not terminate at a corner._x000D_It is recommended to use a hacksaw to trim the end cap to match the fascia board size and fix it in place with superglue._x000D_Freefoamand#039;s fascia end cap is 300mm in length and is coated in a smooth storm grey._x000D_Freefoam fascia_x000D_Available in 6 different sizes ranging from 150mm to 410mm in a wide selection of colours featuring Freefoam patented Colourmax technology._x000D_Freefoamand#039;s fascias are BS EN 13245-2:2008 certified.

GBP 7.21

1

Fascia Box End - 404mm x 18mm x 1.25mtr White

Our 404mm wide 18mm thick box end board is used to cut out the wide section of board found at the bottom of a barge board where it joins the fascia board.Â For more information on how to construct a box end board please take a look at our short PBSL group video below;

GBP 23.30

1

External Window Cill End Caps Standard - 150mm White - Pair

Cill end caps, available in 3 different sizes, are used to cover the cut ends of PVC Cills.

GBP 1.43

1

External Window Cill End Caps Standard - 180mm White - Pair

Cill end caps, available in 3 different sizes, are used to cover the cut ends of PVC Cills.

GBP 3.86

1

External Window Cill End Caps Standard - 85mm White - Pair

Cill end caps, available in 3 different sizes, are used to cover the cut ends of PVC Cills.

GBP 1.44

1

FloPlast Fascia Box End - 404mm x 18mm x 1.25mtr Rosewood

Our 404mm wide 18mm thick box end board is used to cut out the wide section of board found at the bottom of a barge board where it joins the fascia board.Â For more information on how to construct a box end board please take a look at our short PBSL group video below;

GBP 32.75

1

DIGITAL MARKETING

Brand

Merchant

Price (EUR)

Fascia End Cap - 300mm White Woodgrain

Fascia End Cap - 300mm Black Smooth

Fascia End Cap - 315mm White

Fascia End Cap - 300mm Chartwell Green Woodgrain

Fascia End Cap - 300mm Anthracite Grey Smooth

Stainless Steel Balustrade Scroll End - 48.3mm Diameter

Fascia End Cap - 300mm Dark Grey Smooth

White Fascia Capping Board End Cap - 50mm

Rosewood Fascia Capping Board End Cap - 50mm

Ogee Fascia Box End Cover - 60mm x 404mm White

Fibre Cement Cladding Aluminium End Profile - 3mtr Black

Fibre Cement Cladding Aluminium End Profile - 3mtr White

Stainless Steel Balustrade Flat End Cap - 48.3mm Diameter

Black Ash Fascia Capping Board End Cap - 50mm

Fibre Cement Cladding Aluminium End Profile - 3mtr Agate Grey

Fibre Cement Cladding Aluminium End Profile - 3mtr Granite Grey

Fibre Cement Cladding Aluminium End Profile - 3mtr Anthracite Grey

FloPlast Fascia End Cap - 315mm Golden Oak

FloPlast Fascia End Cap - 315mm Black Ash Woodgrain

Fascia End Cap - 300mm Storm Grey Smooth

Fascia Box End - 404mm x 18mm x 1.25mtr White

External Window Cill End Caps Standard - 150mm White - Pair

External Window Cill End Caps Standard - 180mm White - Pair

External Window Cill End Caps Standard - 85mm White - Pair

FloPlast Fascia Box End - 404mm x 18mm x 1.25mtr Rosewood

Powered by Cobiro