mcb.dk | Få success online

MK3 Audi TT Clubsport half cage (Colour: Unpainted, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. Available in a range of colours Available in CDS or lightweight T45

GBP 1197.00

1

MK3 Audi TT Clubsport half cage (Colour: Specific Metallic RAL, Material: Standard CDS)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. Available in a range of colours Available in CDS or lightweight T45

GBP 1171.80

1

MK3 Audi TT Clubsport half cage (Colour: Specific Metallic RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. Available in a range of colours Available in CDS or lightweight T45

GBP 1423.80

1

MK3 Audi TT Clubsport half cage (Colour: Unpainted, Material: Standard CDS)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. Available in a range of colours Available in CDS or lightweight T45

GBP 945.00

1

MK3 Audi TT Clubsport half cage (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. Available in a range of colours Available in CDS or lightweight T45

GBP 1260.00

1

MK3 Audi TT Clubsport half cage (Colour: Specific RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. Available in a range of colours Available in CDS or lightweight T45

GBP 1373.40

1

MK3 Audi TT Clubsport half cage (Colour: Specific RAL, Material: Standard CDS)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. Available in a range of colours Available in CDS or lightweight T45

GBP 1121.40

1

MK3 Audi TT Clubsport half cage (Material: Standard CDS)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. Available in a range of colours Available in CDS or lightweight T45

GBP 1008.00

1

MK3 Audi TTRS CLUBSPORT GT3 STYLE CAGE (Material: Standard CDS)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with side gussets and a rear diagonal with harness bars with 2 gussets up top to replicate the GT3 cages. This Club sport cage mounts at the rear in front of the boot tray you will need to drill and insert the riv-nuts provided. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. The Rear quarter trims will need a small section cutting out where the hoop feet sit, other than that the cage fits with all trim intact. Available in a range of colours Available in CDS or lightweight T45

GBP 945.00

1

MK3 Audi TTRS CLUBSPORT GT3 STYLE CAGE (Colour: Specific Metallic RAL, Material: Standard CDS)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with side gussets and a rear diagonal with harness bars with 2 gussets up top to replicate the GT3 cages. This Club sport cage mounts at the rear in front of the boot tray you will need to drill and insert the riv-nuts provided. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. The Rear quarter trims will need a small section cutting out where the hoop feet sit, other than that the cage fits with all trim intact. Available in a range of colours Available in CDS or lightweight T45

GBP 1045.80

1

MK3 Audi TTRS CLUBSPORT GT3 STYLE CAGE (Colour: Specific RAL, Material: Standard CDS)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with side gussets and a rear diagonal with harness bars with 2 gussets up top to replicate the GT3 cages. This Club sport cage mounts at the rear in front of the boot tray you will need to drill and insert the riv-nuts provided. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. The Rear quarter trims will need a small section cutting out where the hoop feet sit, other than that the cage fits with all trim intact. Available in a range of colours Available in CDS or lightweight T45

GBP 1008.00

1

MK3 Audi TTRS CLUBSPORT GT3 STYLE CAGE (Colour: Specific Metallic RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with side gussets and a rear diagonal with harness bars with 2 gussets up top to replicate the GT3 cages. This Club sport cage mounts at the rear in front of the boot tray you will need to drill and insert the riv-nuts provided. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. The Rear quarter trims will need a small section cutting out where the hoop feet sit, other than that the cage fits with all trim intact. Available in a range of colours Available in CDS or lightweight T45

GBP 1297.80

1

MK3 Audi TTRS CLUBSPORT GT3 STYLE CAGE (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with side gussets and a rear diagonal with harness bars with 2 gussets up top to replicate the GT3 cages. This Club sport cage mounts at the rear in front of the boot tray you will need to drill and insert the riv-nuts provided. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. The Rear quarter trims will need a small section cutting out where the hoop feet sit, other than that the cage fits with all trim intact. Available in a range of colours Available in CDS or lightweight T45

GBP 1197.00

1

MK3 Audi TTRS CLUBSPORT GT3 STYLE CAGE (Colour: Specific RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with side gussets and a rear diagonal with harness bars with 2 gussets up top to replicate the GT3 cages. This Club sport cage mounts at the rear in front of the boot tray you will need to drill and insert the riv-nuts provided. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. The Rear quarter trims will need a small section cutting out where the hoop feet sit, other than that the cage fits with all trim intact. Available in a range of colours Available in CDS or lightweight T45

GBP 1260.00

1

MK3 Audi TTRS CLUBSPORT GT3 STYLE CAGE (Colour: Unpainted, Material: Standard CDS)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with side gussets and a rear diagonal with harness bars with 2 gussets up top to replicate the GT3 cages. This Club sport cage mounts at the rear in front of the boot tray you will need to drill and insert the riv-nuts provided. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. The Rear quarter trims will need a small section cutting out where the hoop feet sit, other than that the cage fits with all trim intact. Available in a range of colours Available in CDS or lightweight T45

GBP 882.00

1

MK3 Audi TTRS CLUBSPORT GT3 STYLE CAGE (Colour: Unpainted, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with side gussets and a rear diagonal with harness bars with 2 gussets up top to replicate the GT3 cages. This Club sport cage mounts at the rear in front of the boot tray you will need to drill and insert the riv-nuts provided. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. The Rear quarter trims will need a small section cutting out where the hoop feet sit, other than that the cage fits with all trim intact. Available in a range of colours Available in CDS or lightweight T45

GBP 1134.00

1

DIGITAL MARKETING

Brand

Merchant

Price (EUR)