Toyota Yaris GR Clubsport Half Cage (Material: Standard CDS, Design Options: With harness bars ( some limitations with standard seats )) This cage replicates the well sought after GTS Cage. This Cage comes complete with curved gussets! The rear mounts bolt direct to existing points in the vehicle whilst the front plates sit on top of the rear seat shelf, Using high quality riv-nuts and a 2 piece mounting system! Remove the rear trim and fit the mounts to the existing holes in the vehicle on top of the rear seat shelf using riv-nuts. then replace the trim and fit the cage in place bolting it on top of the mounts supplied, this gives a nice fitment with no bolts in shear and no trimming required. These are available powder coated in a range of colors! X Brace sold seperately. GBP 1008.00 1
Toyota Yaris GR Clubsport Half Cage (Colour: Specific RAL, Material: Standard CDS, Design Options: without harness bars ( recomended with OEM seats )) This cage replicates the well sought after GTS Cage. This Cage comes complete with curved gussets! The rear mounts bolt direct to existing points in the vehicle whilst the front plates sit on top of the rear seat shelf, Using high quality riv-nuts and a 2 piece mounting system! Remove the rear trim and fit the mounts to the existing holes in the vehicle on top of the rear seat shelf using riv-nuts. then replace the trim and fit the cage in place bolting it on top of the mounts supplied, this gives a nice fitment with no bolts in shear and no trimming required. These are available powder coated in a range of colors! X Brace sold seperately. GBP 1058.40 1
Toyota Yaris GR Clubsport Half Cage (Colour: Specific RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: without harness This cage replicates the well sought after GTS Cage. This Cage comes complete with curved gussets! The rear mounts bolt direct to existing points in the vehicle whilst the front plates sit on top of the rear seat shelf, Using high quality riv-nuts and a 2 piece mounting system! Remove the rear trim and fit the mounts to the existing holes in the vehicle on top of the rear seat shelf using riv-nuts. then replace the trim and fit the cage in place bolting it on top of the mounts supplied, this gives a nice fitment with no bolts in shear and no trimming required. These are available powder coated in a range of colors! X Brace sold seperately. GBP 1310.40 1
Toyota Yaris GR Clubsport Half Cage (Colour: Unpainted, Material: Standard CDS, Design Options: With harness bars ( some limitations with standard sea This cage replicates the well sought after GTS Cage. This Cage comes complete with curved gussets! The rear mounts bolt direct to existing points in the vehicle whilst the front plates sit on top of the rear seat shelf, Using high quality riv-nuts and a 2 piece mounting system! Remove the rear trim and fit the mounts to the existing holes in the vehicle on top of the rear seat shelf using riv-nuts. then replace the trim and fit the cage in place bolting it on top of the mounts supplied, this gives a nice fitment with no bolts in shear and no trimming required. These are available powder coated in a range of colors! X Brace sold seperately. GBP 945.00 1
Toyota Yaris GR Clubsport Half Cage (Colour: Specific RAL, Material: Standard CDS, Design Options: With harness bars ( some limitations with standard This cage replicates the well sought after GTS Cage. This Cage comes complete with curved gussets! The rear mounts bolt direct to existing points in the vehicle whilst the front plates sit on top of the rear seat shelf, Using high quality riv-nuts and a 2 piece mounting system! Remove the rear trim and fit the mounts to the existing holes in the vehicle on top of the rear seat shelf using riv-nuts. then replace the trim and fit the cage in place bolting it on top of the mounts supplied, this gives a nice fitment with no bolts in shear and no trimming required. These are available powder coated in a range of colors! X Brace sold seperately. GBP 1121.40 1
Toyota Yaris GR Clubsport Half Cage (Colour: Specific Metallic RAL, Material: Standard CDS, Design Options: With harness bars ( some limitations with This cage replicates the well sought after GTS Cage. This Cage comes complete with curved gussets! The rear mounts bolt direct to existing points in the vehicle whilst the front plates sit on top of the rear seat shelf, Using high quality riv-nuts and a 2 piece mounting system! Remove the rear trim and fit the mounts to the existing holes in the vehicle on top of the rear seat shelf using riv-nuts. then replace the trim and fit the cage in place bolting it on top of the mounts supplied, this gives a nice fitment with no bolts in shear and no trimming required. These are available powder coated in a range of colors! X Brace sold seperately. GBP 1171.80 1
Toyota Yaris GR Clubsport Half Cage (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: without harness bars ( recomended wit This cage replicates the well sought after GTS Cage. This Cage comes complete with curved gussets! The rear mounts bolt direct to existing points in the vehicle whilst the front plates sit on top of the rear seat shelf, Using high quality riv-nuts and a 2 piece mounting system! Remove the rear trim and fit the mounts to the existing holes in the vehicle on top of the rear seat shelf using riv-nuts. then replace the trim and fit the cage in place bolting it on top of the mounts supplied, this gives a nice fitment with no bolts in shear and no trimming required. These are available powder coated in a range of colors! X Brace sold seperately. GBP 1197.00 1
Toyota Yaris GR Clubsport Half Cage (Colour: Specific Metallic RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: withou This cage replicates the well sought after GTS Cage. This Cage comes complete with curved gussets! The rear mounts bolt direct to existing points in the vehicle whilst the front plates sit on top of the rear seat shelf, Using high quality riv-nuts and a 2 piece mounting system! Remove the rear trim and fit the mounts to the existing holes in the vehicle on top of the rear seat shelf using riv-nuts. then replace the trim and fit the cage in place bolting it on top of the mounts supplied, this gives a nice fitment with no bolts in shear and no trimming required. These are available powder coated in a range of colors! X Brace sold seperately. GBP 1360.80 1
Toyota Yaris GR Clubsport Half Cage (Colour: Specific Metallic RAL, Material: Standard CDS, Design Options: without harness bars ( recomended with OEM This cage replicates the well sought after GTS Cage. This Cage comes complete with curved gussets! The rear mounts bolt direct to existing points in the vehicle whilst the front plates sit on top of the rear seat shelf, Using high quality riv-nuts and a 2 piece mounting system! Remove the rear trim and fit the mounts to the existing holes in the vehicle on top of the rear seat shelf using riv-nuts. then replace the trim and fit the cage in place bolting it on top of the mounts supplied, this gives a nice fitment with no bolts in shear and no trimming required. These are available powder coated in a range of colors! X Brace sold seperately. GBP 1121.40 1
Toyota Yaris GR Clubsport Half Cage (Colour: Specific RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: With harness ba This cage replicates the well sought after GTS Cage. This Cage comes complete with curved gussets! The rear mounts bolt direct to existing points in the vehicle whilst the front plates sit on top of the rear seat shelf, Using high quality riv-nuts and a 2 piece mounting system! Remove the rear trim and fit the mounts to the existing holes in the vehicle on top of the rear seat shelf using riv-nuts. then replace the trim and fit the cage in place bolting it on top of the mounts supplied, this gives a nice fitment with no bolts in shear and no trimming required. These are available powder coated in a range of colors! X Brace sold seperately. GBP 1373.40 1
Toyota Yaris GR Clubsport Half Cage (Colour: Unpainted, Material: Standard CDS, Design Options: without harness bars ( recomended with OEM seats )) This cage replicates the well sought after GTS Cage. This Cage comes complete with curved gussets! The rear mounts bolt direct to existing points in the vehicle whilst the front plates sit on top of the rear seat shelf, Using high quality riv-nuts and a 2 piece mounting system! Remove the rear trim and fit the mounts to the existing holes in the vehicle on top of the rear seat shelf using riv-nuts. then replace the trim and fit the cage in place bolting it on top of the mounts supplied, this gives a nice fitment with no bolts in shear and no trimming required. These are available powder coated in a range of colors! X Brace sold seperately. GBP 882.00 1
Toyota Yaris GR Clubsport Half Cage (Colour: Unpainted, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: With harness bars This cage replicates the well sought after GTS Cage. This Cage comes complete with curved gussets! The rear mounts bolt direct to existing points in the vehicle whilst the front plates sit on top of the rear seat shelf, Using high quality riv-nuts and a 2 piece mounting system! Remove the rear trim and fit the mounts to the existing holes in the vehicle on top of the rear seat shelf using riv-nuts. then replace the trim and fit the cage in place bolting it on top of the mounts supplied, this gives a nice fitment with no bolts in shear and no trimming required. These are available powder coated in a range of colors! X Brace sold seperately. GBP 1197.00 1
Toyota Yaris GR Clubsport Half Cage (Colour: Specific Metallic RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: With h This cage replicates the well sought after GTS Cage. This Cage comes complete with curved gussets! The rear mounts bolt direct to existing points in the vehicle whilst the front plates sit on top of the rear seat shelf, Using high quality riv-nuts and a 2 piece mounting system! Remove the rear trim and fit the mounts to the existing holes in the vehicle on top of the rear seat shelf using riv-nuts. then replace the trim and fit the cage in place bolting it on top of the mounts supplied, this gives a nice fitment with no bolts in shear and no trimming required. These are available powder coated in a range of colors! X Brace sold seperately. GBP 1423.80 1
Toyota Yaris GR Clubsport Half Cage (Material: Standard CDS, Design Options: without harness bars ( recomended with OEM seats )) This cage replicates the well sought after GTS Cage. This Cage comes complete with curved gussets! The rear mounts bolt direct to existing points in the vehicle whilst the front plates sit on top of the rear seat shelf, Using high quality riv-nuts and a 2 piece mounting system! Remove the rear trim and fit the mounts to the existing holes in the vehicle on top of the rear seat shelf using riv-nuts. then replace the trim and fit the cage in place bolting it on top of the mounts supplied, this gives a nice fitment with no bolts in shear and no trimming required. These are available powder coated in a range of colors! X Brace sold seperately. GBP 945.00 1
Toyota Yaris GR Clubsport Half Cage (Colour: Unpainted, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: without harness ba This cage replicates the well sought after GTS Cage. This Cage comes complete with curved gussets! The rear mounts bolt direct to existing points in the vehicle whilst the front plates sit on top of the rear seat shelf, Using high quality riv-nuts and a 2 piece mounting system! Remove the rear trim and fit the mounts to the existing holes in the vehicle on top of the rear seat shelf using riv-nuts. then replace the trim and fit the cage in place bolting it on top of the mounts supplied, this gives a nice fitment with no bolts in shear and no trimming required. These are available powder coated in a range of colors! X Brace sold seperately. GBP 1134.00 1
Toyota Yaris GR Clubsport Half Cage (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: With harness bars ( some limitations This cage replicates the well sought after GTS Cage. This Cage comes complete with curved gussets! The rear mounts bolt direct to existing points in the vehicle whilst the front plates sit on top of the rear seat shelf, Using high quality riv-nuts and a 2 piece mounting system! Remove the rear trim and fit the mounts to the existing holes in the vehicle on top of the rear seat shelf using riv-nuts. then replace the trim and fit the cage in place bolting it on top of the mounts supplied, this gives a nice fitment with no bolts in shear and no trimming required. These are available powder coated in a range of colors! X Brace sold seperately. GBP 1260.00 1
BMW F22 GTS Replica Clubsport Cage (Material: Standard CDS) This BMW F22 roll cage from JP Cages is a replica of the well sought after GTS cage. Complete with curved gussets, this cage has front and rear mounts that rest on the rear seat shelf, and in between the rear belt towers to be attached using the rivnuts provided with this cage. This BMW F22 half cage is available powder coated in a range of colours. GBP 1008.00 1
BMW F22 GTS Replica Clubsport Cage (Colour: Specific Metallic RAL, Material: Standard CDS) This BMW F22 roll cage from JP Cages is a replica of the well sought after GTS cage. Complete with curved gussets, this cage has front and rear mounts that rest on the rear seat shelf, and in between the rear belt towers to be attached using the rivnuts provided with this cage. This BMW F22 half cage is available powder coated in a range of colours. GBP 1171.80 1
BMW F22 GTS Replica Clubsport Cage (Colour: Unpainted, Material: Standard CDS) This BMW F22 roll cage from JP Cages is a replica of the well sought after GTS cage. Complete with curved gussets, this cage has front and rear mounts that rest on the rear seat shelf, and in between the rear belt towers to be attached using the rivnuts provided with this cage. This BMW F22 half cage is available powder coated in a range of colours. GBP 945.00 1
BMW F22 GTS Replica Clubsport Cage (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition) This BMW F22 roll cage from JP Cages is a replica of the well sought after GTS cage. Complete with curved gussets, this cage has front and rear mounts that rest on the rear seat shelf, and in between the rear belt towers to be attached using the rivnuts provided with this cage. This BMW F22 half cage is available powder coated in a range of colours. GBP 1260.00 1
BMW F22 GTS Replica Clubsport Cage (Colour: Specific Metallic RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition) This BMW F22 roll cage from JP Cages is a replica of the well sought after GTS cage. Complete with curved gussets, this cage has front and rear mounts that rest on the rear seat shelf, and in between the rear belt towers to be attached using the rivnuts provided with this cage. This BMW F22 half cage is available powder coated in a range of colours. GBP 1423.80 1
BMW F22 GTS Replica Clubsport Cage (Colour: Specific RAL, Material: Standard CDS) This BMW F22 roll cage from JP Cages is a replica of the well sought after GTS cage. Complete with curved gussets, this cage has front and rear mounts that rest on the rear seat shelf, and in between the rear belt towers to be attached using the rivnuts provided with this cage. This BMW F22 half cage is available powder coated in a range of colours. GBP 1121.40 1
BMW F22 GTS Replica Clubsport Cage (Colour: Specific RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition) This BMW F22 roll cage from JP Cages is a replica of the well sought after GTS cage. Complete with curved gussets, this cage has front and rear mounts that rest on the rear seat shelf, and in between the rear belt towers to be attached using the rivnuts provided with this cage. This BMW F22 half cage is available powder coated in a range of colours. GBP 1373.40 1
BMW F22 GTS Replica Clubsport Cage (Colour: Unpainted, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition) This BMW F22 roll cage from JP Cages is a replica of the well sought after GTS cage. Complete with curved gussets, this cage has front and rear mounts that rest on the rear seat shelf, and in between the rear belt towers to be attached using the rivnuts provided with this cage. This BMW F22 half cage is available powder coated in a range of colours. GBP 1197.00 1
BMW E82 135i Clubsport Half Cage (Colour: Specific RAL, Material: ropt510) This cage offers substantial protection whilst avoiding any permanent changes to the vehicle. The rear mounts bolt direct to existing points in the vehicle whilst the front plates sit on top of the rear seat shelf, simply mark and drill the holes for the front plates and fit the high quality Riv-nuts provided with the cage. The Cage includes Curved gussets. These are available powder coated in a range of colours! GBP 667.80 1