5 Stage Reverse Osmosis System 400GPD High Flow RO System for Home, Fishkeeping or Window Cleaning use
5 Stage Reverse Osmosis 400GPD System ¦ Fishkeeping, Window Cleaning, High Flow RO System by Finerfilters Reverse Osmosis is a technology used to remove the large majority (98%+) of contaminants from water. The Reverse Osmosis system works by pushing the water under pressure through a number of increasingly smaller filters and finally through a semipermeable membrane, essentially trapping all contaminants. Finerfilters are here to support you before and long after you buy. We provide help through manuals, easy-install guides, diagrams, and phone & email support.This system produces up to 1514 litres per day of purified water and comes complete with the following: Installation Manual. Chrome Faucet Tap. All pipes, pre-filters, post-filters, and fittings are required for easy installation. The membrane can last between 1 and 2 years dependent on water hardness. Filters are to be replaced every six months. Please note: This system requires a minimum of 29PSI (2 BAR) to work. This is for the booster pump to operate. Operating the system at a lower pressure than the minimum can cause damage to the pump itself. Ideal pressure depends upon incoming water temperature but around 60 PSI (4 BAR) is acceptable. Reverse Osmosis Systems waste water to make water, and this should be done at high pressure as the water is being forced through microscopic holes which catch contaminants. This is normal and the same with all RO systems as this is the way the membrane rejects the impure water, which goes to the drain, to produce pure water.The system works optimally at 80-90 PSI (5.5 - 6 bar), and to get to the quoted output, we'd recommend running the system on or around this pressure.This allows the system to reduce the waste water to pure water ratio and work quicker at producing pure water.
