5 results (0,14266 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Domus DX-CON - Multi Fan Remote Control

Domus DX-CON - Multi Fan Remote Control

Domus DX-CON - Multi Fan Remote Control Optional remote controller DX-CON, designed to work the DX fan range and integral and remote sensors. Features Provides supply or extract variable speed Automatic or manual switching of several fans Economy speed setting 50% On/off switches Maximum or economy performance Control DX-CON can control several fans at one time from the same controller Up to 5 6” fans Up to 5 9” fans Up to 2 12” fans Do not mix fan sizes on the same controller Installation Mount the controller 1.5 meters from the floor Do no expose to large amount of oil, grease or water To install - Lift panel and remove two screws - Push out the backplate box cable entry using a screwdriver - Spot through backplate box and drill and plug the wall. Flat the backplate box to the prepared wall - Feed 20cm of the supply cable into the box - Connect end of the cable into the control block, connect wires (see wiring diagram) - If a security strap has been fitted, hook the lip of the security strap in hinge socket. Fit the control into the backplate box - Secure installation

GBP 132.19
1

Mitsubishi LGH200RVXT3-E (250x750mm Spigot)

Mitsubishi LGH200RVXT3-E (250x750mm Spigot)

Mitsubishi LGH200RVXT3-E (250x750mm Spigot) Product Part Number LGH200RVXT3-E Description The Commercial Lossnay (LGH) Mechanical Ventilation Heat Recovery (MVHR) systems are designed to supply clean, fresh air into commercial buildings, whilst simultaneously extracting stale air. The RVXT3 units offer a significantly reduced height whilst maintaining a large airflow, allowing easy installation in ceiling voids. Key Features Power Supply: 3 Phase Mitsubishi Electric pioneered heat exchanger enables maximised latent heat exchange, resulting in cost and carbon savings Low unit height (500mm) and lightweight structure, ideal for ceiling installation Four commissionable fan speeds, settable between 25-100%, with independent supply and return fan control offering low running costs and easier compliance to Part L Optional Mitsubishi Electric energy saving CO2 sensors allow automatic incremental fan control for a healthy indoor environment; sensors powered by Lossnay unit No condensate drain required allowing for easy design and installation Dual-barrier coated fans, prevents dust and grease accumulation, ensuring long-term efficient fan operation Constant pressure control available with 0-10V pressure transducer (field supplied), for variable airflow requirements across multiple zones Compatible with Mr Slim and City Multi air conditioning systems for a complete and highly effective system operation Duct handing selectable via dipswitch, for easy and flexible installation Optional high efficiency filters available Sound Power Octave Levels Dimensions

GBP 5089.15
1

Mitsubishi LGH160RVXT3-E (250x750mm Spigot)

Mitsubishi LGH160RVXT3-E (250x750mm Spigot)

Mitsubishi LGH160RVXT3-E (250x750mm Spigot) Product Part Number LGH160RVXT3-E Description The Commercial Lossnay (LGH) Mechanical Ventilation Heat Recovery (MVHR) systems are designed to supply clean, fresh air into commercial buildings, whilst simultaneously extracting stale air. The RVXT3 units offer a significantly reduced height whilst maintaining a large airflow, allowing easy installation in ceiling voids. Key Features Power Supply: 3 Phase Mitsubishi Electric pioneered heat exchanger enables maximised latent heat exchange, resulting in cost and carbon savings Low unit height (500mm) and lightweight structure, ideal for ceiling installation Four commissionable fan speeds, settable between 25-100%, with independent supply and return fan control offering low running costs and easier compliance to Part L Optional Mitsubishi Electric energy saving CO2 sensors allow automatic incremental fan control for a healthy indoor environment; sensors powered by Lossnay unit No condensate drain required allowing for easy design and installation Dual-barrier coated fans, prevents dust and grease accumulation, ensuring long-term efficient fan operation Constant pressure control available with 0-10V pressure transducer (field supplied), for variable airflow requirements across multiple zones Compatible with Mr Slim and City Multi air conditioning systems for a complete and highly effective system operation Duct handing selectable via dipswitch, for easy and flexible installation Optional high efficiency filters available Sound Power Octave Levels Dimensions

GBP 3924.43
1

Mitsubishi LGH250RVXT3-E (250x750mm Spigot)

Mitsubishi LGH250RVXT3-E (250x750mm Spigot)

Mitsubishi LGH250RVXT3-E (250x750mm Spigot) Product Part Number LGH250RVXT3-E Description The Commercial Lossnay (LGH) Mechanical Ventilation Heat Recovery (MVHR) systems are designed to supply clean, fresh air into commercial buildings, whilst simultaneously extracting stale air. The RVXT3 units offer a significantly reduced height whilst maintaining a large airflow, allowing easy installation in ceiling voids. Key Features Power Supply: 3 Phase Mitsubishi Electric pioneered heat exchanger enables maximised latent heat exchange, resulting in cost and carbon savings Low unit height (500mm) and lightweight structure, ideal for ceiling installation Four commissionable fan speeds, settable between 25-100%, with independent supply and return fan control offering low running costs and easier compliance to Part L Optional Mitsubishi Electric energy saving CO2 sensors allow automatic incremental fan control for a healthy indoor environment; sensors powered by Lossnay unit No condensate drain required allowing for easy design and installation Dual-barrier coated fans, prevents dust and grease accumulation, ensuring long-term efficient fan operation Constant pressure control available with 0-10V pressure transducer (field supplied), for variable airflow requirements across multiple zones Compatible with Mr Slim and City Multi air conditioning systems for a complete and highly effective system operation Duct handing selectable via dipswitch, for easy and flexible installation Optional high efficiency filters available Sound Power Octave Levels Dimensions

GBP 6083.10
1

Vent Axia Lo-Carbon Sentinel Kinetic Cooker Hood

Vent Axia Lo-Carbon Sentinel Kinetic Cooker Hood

Vent Axia Sentinel Kinetic heat recovery unit with Cooker Hood Product Part Number Vent Axia Kinetic CWH L (White Cooker Hood) - 446756 Description The Sentinel Kinetic Cooker Hood is designed to fit in a 600mm wide aperture above a hob. The telescopic hood incorporates two flat removable metal grease filters, low energy light bulbs and is available with a White or Brushed Aluminium front trim. The hood contains an integral fire damper in accordance with BRE Digest 398 and is connected to the heat recovery unit by a galvanised steel duct with access for cleaning. When the hood is opened, the heat recovery unit goes to boost speed and the summer bypass automatically opens to prevent cooking by-products entering the heat recovery cell. As an additional safety feature, the duct also contains a thermal cut-out fuse which turns off the MVHR unit in the event of excessive temperature in the airway. Cooker Hood units cannot be handed on-site and must be purchased as left hand (L) or right hand (R) models. The Lo-Carbon Sentinel Kinetic BH is the UKs bestselling heat recovery unit for people looking for a top quality unit at a realistic cost. Suitable for houses up to 150 m2 and meets the latest requirements of the Building Regulations ADF and ADL for whole house system ventilation. Filtration 2 x G4 with the option of a F7 pollen intake filter Controllability The Lo-Carbon Sentinel Kinetic models have 3 fully adjustable speeds and a purge setting (maximum flow). Provided with the unit is a digital controller that can be used to pre-set the speeds to any required airflow within the performance range Boost can be achieved with almost any type of sensor or switch including momentary  Integral Humidity Sensor The integral humidity sensor (models with H suffix) increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature Construction The outer enclosure is constructed of PVC with the inner body being constructed of EPP Motors The unit has 2 x low energy, high efficiency EC/DC motors Installation Spigot Options The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom of the unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after

GBP 2862.29
1