22 results (0,14877 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Verplas Thermal Round Pipe Duct to Fitting Connectors

Verplas Thermal Round Pipe Duct to Fitting Connectors

Verplas Thermal Round Pipe Duct to Fitting Connector(Click and Lock Mechanism) Product Part Number 125mm Thermal Connector - SST-125-DFCON 160mm Thermal Connector - SST-160-DFCON Description Duct connector is manufactured with thermal resistance in mind and exceeds the thermal resistance compliance tests. The rapid self seal technology is designed to increase the pace in which a ventilation system can be installed. Components within the range of thermal self seal also exceed the requirements set out in the DW/143 Class A leakage test.  Available Sizes 125mm 160mm

GBP 2.47
1

Vent Axia Kinetic 200ZH Heat Recovery Unit

Vent Axia Kinetic 200ZH Heat Recovery Unit

Vent Axia Sentinel Kinetic 200ZH Horizontal Heat Recovery Unit Product Part Number Vent Axia Kinetic 200ZH - 449540 Key Features Vent Axia Horizontal Heat recovery unit Suitable for houses up to 140 m2 Up to 81% heat recovery Mechanical summer by-pass Internal humidity sensor 5 Year warranty Complete with digital controller Multiple control options Frost protection 100% programmable and adjustable supply and extract rates Night time set back Dimensions (HxLxW): 200 x 570 x 895 (mm) Filtration 2 x G3 with optional F5 Controllability The Lo-Carbon Sentinel Kinetic Horizontal models have three fully adjustable speeds and a purge setting (maximum airflow). Supplied with the unit is a digital controller that can be used to pre-set the speeds to any required airflow within the performance range. Boost can be achieved with almost any type of sensor or switch including momentary. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature Construction Fully insulated construction of galvanised steel. Motors The unit has 2 x low energy, high efficiency EC/DC motors

GBP 2534.40
1

Testo 417 Vane Anemometer

Testo 417 Vane Anemometer

Testo 417 Vane Anemometer Product Part Number Vane Anemometer - testo-417 Description The compact vane anemometer Testo 417 was specifically designed to make measuring air inlets and outlets of air conditioning and ventilation systems as easy as possible. Its integrated 100 mm vane ensures rapid and precise results. The instrument automatically calculates time and point average values, as well as the volume flow, displaying them on its screen. This feature is particularly useful for adjusting balanced residential ventilation systems efficiently. The Testo Smart App allows for quick documentation of measurements, making it even more convenient. Moreover, the app serves as a secondary display for the instrument. For added versatility, the Testo 417 is available in two practical kits. The first kit includes two measuring funnels for plate outlets and ventilation grilles, which can be easily attached to the vane, covering a wide range of outlet sizes and formats. The second kit, in addition to the two measuring funnels, includes a volume flow straightener, allowing precise measurements even at swirl diffusers. Package Contents testo 417, 100 mm vane anemometer with App connection, incl. carrying bag, calibration protocol and 3 X AA batteries Key Features Easy, fast, and precise measurement of flow, volume flow, and temperature at air inlets and outlets Efficient regulation of balanced residential ventilation Fast documentation with the testo Smart App Fast in-app configuration, graph history, second screen, and measurement data memory in the testo Smart App Timed and point mean value calculation Durability through compact design with robust housing.

GBP 378.00
1

Testo 417 Vane Anemometer Kit 1

Testo 417 Vane Anemometer Kit 1

Testo 417 Vane Anemometer Kit 1 Product Part Number Vane Anemometer - testo-417KIT1 Description The compact vane anemometer Testo 417 was specifically designed to make measuring air inlets and outlets of air conditioning and ventilation systems as easy as possible. Its integrated 100 mm vane ensures rapid and precise results. The instrument automatically calculates time and point average values, as well as the volume flow, displaying them on its screen. This feature is particularly useful for adjusting balanced residential ventilation systems efficiently. The Testo Smart App allows for quick documentation of measurements, making it even more convenient. Moreover, the app serves as a secondary display for the instrument. For added versatility, the Testo 417 is available in two practical kits. The first kit includes two measuring funnels for plate outlets and ventilation grilles, which can be easily attached to the vane, covering a wide range of outlet sizes and formats. The second kit, in addition to the two measuring funnels, includes a volume flow straightener, allowing precise measurements even at swirl diffusers. Package Contents testo 417 funnel kit 1, consisting of vane anemometer testo 417, measuring funnel for plate outlets, measuring funnel for ventilation grilles, carrying bag, calibration protocol and 3 x AA batteries Key Features Easy, fast, and precise measurement of flow, volume flow, and temperature at air inlets and outlets Efficient regulation of balanced residential ventilation Fast documentation with the testo Smart App Fast in-app configuration, graph history, second screen, and measurement data memory in the testo Smart App Timed and point mean value calculation Durability through compact design with robust housing.

GBP 463.32
1

Vent Axia Kinetic 300ZH Heat Recovery Unit

Vent Axia Kinetic 300ZH Heat Recovery Unit

Vent Axia Sentinel Kinetic 300ZH Horizontal Heat Recovery Unit Product Part Number Vent Axia Sentinel Kinetic 300ZH - 449536 Filtration 2 x G3 with optional F5 Controllability The Lo-Carbon Sentinel Kinetic Horizontal models have three fully adjustable speeds and a purge setting (maximum airflow). Supplied with the unit is a digital controller that can be used to pre-set the speeds to any required airflow within the performance range. Boost can be achieved with almost any type of sensor or switch including momentary. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature Construction Fully insulated construction of galvanised steel. Motors The unit has 2 x low energy, high efficiency EC/DC motors Installation The Sentinel Kinetic Horizontal models designed to be horizontally mounted under a slab, with access for servicing and maintenance from below. When mounted in an unheated area ducting must be insulated. The Condensate drain is through the 'atmosphere' end of the unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation. Electrical and control connections are also made on the outside of the unit. Accessories In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation.

GBP 2892.98
1

Testo 417 Vane Anemometer Kit 2

Testo 417 Vane Anemometer Kit 2

Testo 417 Vane Anemometer Kit 2 Product Part Number Vane Anemometer - testo-417KIT2 Description The compact vane anemometer Testo 417 was specifically designed to make measuring air inlets and outlets of air conditioning and ventilation systems as easy as possible. Its integrated 100 mm vane ensures rapid and precise results. The instrument automatically calculates time and point average values, as well as the volume flow, displaying them on its screen. This feature is particularly useful for adjusting balanced residential ventilation systems efficiently. The Testo Smart App allows for quick documentation of measurements, making it even more convenient. Moreover, the app serves as a secondary display for the instrument. For added versatility, the Testo 417 is available in two practical kits. The first kit includes two measuring funnels for plate outlets and ventilation grilles, which can be easily attached to the vane, covering a wide range of outlet sizes and formats. The second kit, in addition to the two measuring funnels, includes a volume flow straightener, allowing precise measurements even at swirl diffusers. Package Contents testo 417 funnel kit 2, consisting of vane anemometer testo 417, measuring funnel for plate outlets, measuring funnel for ventilation grilles, flow straightener, carrying bag, calibration protocol and 3 x AA batteries Key Features Easy, fast, and precise measurement of flow, volume flow, and temperature at air inlets and outlets Efficient regulation of balanced residential ventilation Fast documentation with the testo Smart App Fast in-app configuration, graph history, second screen, and measurement data memory in the Testo Smart App Timed and point mean value calculation Durability through compact design with robust housing.

GBP 549.72
1

Vent Axia Sentinel Multivent H Unit

Vent Axia Sentinel Multivent H Unit

Vent Axia Sentinel Multivent H Unit Product Part Number Vent Axia Sentinel Multivent with Humidity Sensor - 445655 Key Features Internal Humidity sensor Integral LCD display allows the installer to select appropriate low, normal and boost speeds to meet demand Ultra-quiet - acoustically lined for low noise levels Demand Control - enables precise ventilation rate, is set in 1% increments based on property size Manual and automatic control options Integral adjustable overrun timer and delay on timer Plug-n-Play automatic sensor detection Switched live and SELV connections PVC outer casing with an acoustic lining is included as standard, ensuring minimum noise levels Technical Features Max Airflow of 450m3/h Energy efficient EC/DC motors - 1/3 less energy lost to heat than a conventional AC motor Best in class Specific Fan Power (SFP) as low as 0.16 wls Dimensions (mm) height 310mm, width 360mm, depth 260mm Fitted with four extract 125 or 100mm diameter spigots allowing quick connection to ducts Option of wall, ceiling, and loft mounting Fully serviceable unit with all parts accessible Dry Out setting – Option set at installation, Sentinel Multivent will run on boost for 1 week to assist in removing moisture Recognised in SAP Appendix Q Complies with Building ADF (System 3) 2-year standard or optional 5-year parts warranty Humidity Sensor The integral humidity sensor (Sentinel Multivent H) increases fan speed in proportion to relative humidity levels, saving energy and reducing noise The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room Night-time relative humidity increment setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature Controllability Demand Control - enables precise ventilation rate, is set in 1% increments based on property size Integral LCD display allows the installer to select appropriate low, normal and boost speeds to

GBP 505.80
1

Vent Axia Sentinel Kinetic 200ZPH Horizontal Heat Recovery Unit

Vent Axia Sentinel Kinetic 200ZPH Horizontal Heat Recovery Unit

Vent Axia Sentinel Kinetic 200ZPH Horizontal Heat Recovery Unit Product Part Number Sentinel Kinetic 200ZPH Horizontal Heat Recovery Unit - 407162 Description Vent Axia Sentinel Kinetic 200ZPH is a horizontal ceiling mounted whole house heat recovery system with up to 86% heat exchange efficiency. Specifically designed for new build constructions with a high level of insulation. The Lo-Carbon Sentinel Kinetic Horizontal 200ZPH meets the latest requirements of the Building Regulations ADF and ADL for whole house system ventilation: System 4 - Continuous mechanical supply and extract with heat recovery. Vent Axia 200ZPH is suitable for house sizes of up to 140m2 Filtration This unit requires 2 x G3 filter Controllability The Lo-Carbon Sentinel Kinetic Horizontal models have two fully adjustable speeds and a purge setting (maximum airflow). Supplied with the unit is a digital controller that can be used to pre-set the speeds to any required airflow within the performance range. Boost can be achieved with almost any type of sensor or switch including momentary. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature Construction Constructed of galvanised steel and is fully insulated Motors The unit has 2 x low energy, high efficiency EC/DC motors Installation The Sentinel Kinetic Horizontal models designed to be horizontally mounted under a slab, with access for servicing and maintenance from below. When mounted in an unheated area ducting must be insulated. 200 ZPH models are 200mm deep, including condensate and mounting bracket. The Condensate drain is through the 'atmosphere' end of the unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation. Electrical and control connections are also made on the outside of the unit. Accessories In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation.

GBP 1915.20
1

Zehnder Caladair Pyrostar Smoke and Air Handling Unit

Zehnder Caladair Pyrostar Smoke and Air Handling Unit

Zehnder Caladair Pyrostar Smoke and Air Handling Unit Caladair Pyrostar is smoke and air handling unit that is suitable for external and internal applications. Pyrostar smoke extraction units met legal requirements for the extraction of smoke and hot gases in the event of a fire in high rise and public assembly buildings with a rating of 2hrs. The range is also designed for the intermediate or continuous extraction of contaminated air from industrial premises, professional kitchens and carparks. High quality bespoke units manufactured in Spain to order (please contact office for delivery date) Key features Smoke and air handling unit Suitable external and internal applications 2hr fire rating @400 degree CE certificate for smoke and heat extraction fans which comply with standard NF EN 12101-3 Extracts smoke and hot gases in the event of a fire Extracts contaminated air from industrial premises Belt pulley transmission with IE3 AC motor Flow rates from 600 to 50000 m3/h Pyrostar R is equipped with an epoxy paint backward wheel Pyrostar A is equipped with a forward wheel constructed of galvanised steel Condensate tray at bottom of unit (ECP option) for removal of condensates Variable drive pulley up to 5.5 kW Protective housing for the transmission on the fan compartment side, easily removable for belt replacement. Fitted with bird protection mesh on outlet Isolation switch installed on unit High quality Construction. Models Pyrostar range is available in 5 sizes and 20 models. The range covers flow rates from 600 to 50000 m3/hr either in impulse turbine version for pressures up to 1500 Pa, or reaction turbine versions for pressure up to 2600 Pa. The Pyrostar R version is fitted with a reaction turbine is especially suitable and recommended for applications in professional kitchens or for the extraction of foul contaminated air (car parks, industry, etc.). Available models: Pyrostar 4 / Pyrostar 6 / Pyrostar 10 / Pyrostar 12 / Pyrostar 15 / Pyrostar 20 / Pyrostar 25 / Pyrostar 30 / Pyrostar 40 / Pyrostar 50 Supply and extract connections are circular in models 4-12, models 15-50 are square connections. Pyrostar A models– impulse turbine and double opening, made from galvanised steel. It is balanced statically and dynamically

GBP 0.00
1

Vent Axia Lo-Carbon Sentinel Kinetic Cooker Hood

Vent Axia Lo-Carbon Sentinel Kinetic Cooker Hood

Vent Axia Sentinel Kinetic heat recovery unit with Cooker Hood Product Part Number Vent Axia Kinetic CWH L (White Cooker Hood) - 446756 Description The Sentinel Kinetic Cooker Hood is designed to fit in a 600mm wide aperture above a hob. The telescopic hood incorporates two flat removable metal grease filters, low energy light bulbs and is available with a White or Brushed Aluminium front trim. The hood contains an integral fire damper in accordance with BRE Digest 398 and is connected to the heat recovery unit by a galvanised steel duct with access for cleaning. When the hood is opened, the heat recovery unit goes to boost speed and the summer bypass automatically opens to prevent cooking by-products entering the heat recovery cell. As an additional safety feature, the duct also contains a thermal cut-out fuse which turns off the MVHR unit in the event of excessive temperature in the airway. Cooker Hood units cannot be handed on-site and must be purchased as left hand (L) or right hand (R) models. The Lo-Carbon Sentinel Kinetic BH is the UKs bestselling heat recovery unit for people looking for a top quality unit at a realistic cost. Suitable for houses up to 150 m2 and meets the latest requirements of the Building Regulations ADF and ADL for whole house system ventilation. Filtration 2 x G4 with the option of a F7 pollen intake filter Controllability The Lo-Carbon Sentinel Kinetic models have 3 fully adjustable speeds and a purge setting (maximum flow). Provided with the unit is a digital controller that can be used to pre-set the speeds to any required airflow within the performance range Boost can be achieved with almost any type of sensor or switch including momentary  Integral Humidity Sensor The integral humidity sensor (models with H suffix) increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature Construction The outer enclosure is constructed of PVC with the inner body being constructed of EPP Motors The unit has 2 x low energy, high efficiency EC/DC motors Installation Spigot Options The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom of the unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after

GBP 2862.29
1

Special Offer Vectaire Maxi AT BY LCDRH Model

Special Offer Vectaire Maxi AT BY LCDRH Model

Description General up to 163 litre/sec at 50Pa - max 177 litre/sec capacity sfp down to 0.40 W/l/s summer bypass which allows the airflow to bypass the heat exchanger automatically when internal and external temperatures are between adjustable setpoints. frost-stat - proportionally reduces intake motor speed as temperature falls - activated when the outside temperature is between +8ºC and -3ºC. run-time and power outage counters easy to install and maintain easy to access G3 filters universal handing for models without humidistat - left or right (see separate diagram for handing on humidistat models) for fitting vertically into lofts, or cupboards - wall fixing bracket supplied variable low (trickle), boost and purge options for each motor boost speed can be activated by a 230V switched live from: a light switch (if more than one light switch is used, each one must be a double pole switch) Remote humidistat (230V - DRH240) Passive infra red (230V - PIRFF) Thermostat (230V - THM) Remote switch/pull cord - 230V low noise levels low running costs CONTROL FEATURES - STANDARD independent variable speed adjustment for each motor for trickle, boost and purge speeds. adjustable boost speed over-run timer from 0 to 30 minutes. adjustable boost speed delay from 0 to 5 minutes remote purge cable connection on circuit board (for optional purge facility) adjustable night time boost and purge inhibitor integral frost-stat - proportionally reduces intake motor speed as temperature falls automatic summer bypass CONTROL FEATURES - FACTORY SET change of ductwork handing on humidistat version (trip point can be set at manufacture) integral humidistat - proportionally increases motor speeds with rising humidity 0-10V connections can be added for: BMS - for remote motor shut-off CO2 detector home automation system relay for external pre-heater 3 speed selector switch optional remote purge cable - factory connected - adjustable over-run timer from 0 to 250 minutes, Pre-set to 15 minutes (adjustable at factory) holiday mode for reduced speeds when property is unoccupied (factory set option) - default setting is 50% of trickle speed run-time and power outage counters downloadable via QR code Specification casing from steel sheet - epoxy paint finish foam construction lining EPS internal components provide acoustic and thermal enhancement low energy EC brushless motor with single width, single inlet, direct drive, forward curved impellors operates in temperature up to 60ºC easy to access standard, disposable G3 filters counter flow heat exchanger Compliance Building Regulations for enhanced energy saving capability Building Regulations for reliable, efficient ventilation EU RoHS Directive Compliant. Complies with IEC60335-2-80, LVD2006/95/CE and EMC2014/30/UE (European Directive against radio interference and electro-magnetic compatibility manufactured in UK to ISO 9001:2015 and 14001:2015 CE marked SAP PCDB Listed Range WHHR Maxi/ BY - bypass, universal WHHR Maxi/ BLH - bypass, left drain humidistat WHHR Maxi/ BRH - bypass, right drain, humidistat Maxi BY+LCD - bypass, universal, integral LCD Maxi+LHHLCD - bypass, left drain, humidistat, integral LCD Maxi+RHHLCD - bypass, right drain, humidistat, integral LC

GBP 1560.00
1

Special Offer Vectaire Maxi BY LCDRH Model

Special Offer Vectaire Maxi BY LCDRH Model

Description General up to 163 litre/sec at 50Pa - max 177 litre/sec capacity sfp down to 0.40 W/l/s summer bypass which allows the airflow to bypass the heat exchanger automatically when internal and external temperatures are between adjustable setpoints. frost-stat - proportionally reduces intake motor speed as temperature falls - activated when the outside temperature is between +8ºC and -3ºC. run-time and power outage counters easy to install and maintain easy to access G3 filters universal handing for models without humidistat - left or right (see separate diagram for handing on humidistat models) for fitting vertically into lofts, or cupboards - wall fixing bracket supplied variable low (trickle), boost and purge options for each motor boost speed can be activated by a 230V switched live from: a light switch (if more than one light switch is used, each one must be a double pole switch) Remote humidistat (230V - DRH240) Passive infra red (230V - PIRFF) Thermostat (230V - THM) Remote switch/pull cord - 230V low noise levels low running costs CONTROL FEATURES - STANDARD independent variable speed adjustment for each motor for trickle, boost and purge speeds. adjustable boost speed over-run timer from 0 to 30 minutes. adjustable boost speed delay from 0 to 5 minutes remote purge cable connection on circuit board (for optional purge facility) adjustable night time boost and purge inhibitor integral frost-stat - proportionally reduces intake motor speed as temperature falls automatic summer bypass CONTROL FEATURES - FACTORY SET change of ductwork handing on humidistat version (trip point can be set at manufacture) integral humidistat - proportionally increases motor speeds with rising humidity 0-10V connections can be added for: BMS - for remote motor shut-off CO2 detector home automation system relay for external pre-heater 3 speed selector switch optional remote purge cable - factory connected - adjustable over-run timer from 0 to 250 minutes, Pre-set to 15 minutes (adjustable at factory) holiday mode for reduced speeds when property is unoccupied (factory set option) - default setting is 50% of trickle speed run-time and power outage counters downloadable via QR code Specification casing from steel sheet - epoxy paint finish foam construction lining EPS internal components provide acoustic and thermal enhancement low energy EC brushless motor with single width, single inlet, direct drive, forward curved impellors operates in temperature up to 60ºC easy to access standard, disposable G3 filters counter flow heat exchanger Compliance Building Regulations for enhanced energy saving capability Building Regulations for reliable, efficient ventilation EU RoHS Directive Compliant. Complies with IEC60335-2-80, LVD2006/95/CE and EMC2014/30/UE (European Directive against radio interference and electro-magnetic compatibility manufactured in UK to ISO 9001:2015 and 14001:2015 CE marked SAP PCDB Listed Range WHHR Maxi/ BY - bypass, universal WHHR Maxi/ BLH - bypass, left drain humidistat WHHR Maxi/ BRH - bypass, right drain, humidistat Maxi BY+LCD - bypass, universal, integral LCD Maxi+LHHLCD - bypass, left drain, humidistat, integral LCD Maxi+RHHLCD - bypass, right drain, humidistat, integral LC

GBP 1320.00
1

Vent Axia Sentinel Kinetic High Flow Heat Recovery System

Vent Axia Sentinel Kinetic High Flow Heat Recovery System

Vent Axia Sentinel Kinetic High Flow Heat Recovery Unit Product Part Number Vent Axia Kinetic High Flow  Right Handed Heat Recovery Unit - 408449 Vent Axia Kinetic High Flow Left Handed Heat Recovery Unit - 408451 Description The UK’s top selling MVHR unit for houses with a max floor area of 345m2 due to the combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features – Vent Axia High flow Suitable for floor areas up to 345m2 Delivers an airflow rate of up to 575 m³/hour @ 100 Pa Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Internal humidity sensor for automatic speed control Latest low energy EC/DC motors Digital controller on unit and optional wall mounted controller PVC Counterflow heat recovery core High heat recovery efficiency of up to 90%. Vertical or horizontal pipe connections Multiple Control options including three 0 to100% fan speed settings, nighttime quiet mode, Purge, Humidity, BMS, timer delay, 0-10v & 240v boost options 2 x G4 filters (optional M5) Low weight of only 34KG UK manufactured MVHR unit with 5 Year parts warranty through BPC Optional acoustic Top Box High Performance The Sentinel Kinetic Plus benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 345m2 With a high performance of 575 m3/hr at 100Pa while still achieving almost 90% heat recovery. The fully automatic capability of the Kinetic range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 3 x Integral infinitely variable fan speed control on supply and extract there is also an optional LCD wall mounted controller available  Spigot Options Spigots may be re-positioned from vertical to give horizontal connection or a combination of vertical and horizontal connection. Orientation This unit is available in both a right hand (external pipes to the RHS) and left-hand version (external pipes to the LHS) it is also possible to convert the orientation on site by following our instruction manual 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home BMS The Kinetics’ BMS capability is also ideal for those commercial applications where landlords or property managers want to monitor and optimise building performance and maintenance. The Kinetic BMS can provide status information and its self-diagnostics can report if any fault is found. Filtration The unit comes supplied with G4 filters with an option of upgrading the air supply filter with a G5 filter that have tool free access As many systems are placed within cupboards the unique filter design folds as you remove it to ensure easy access in restricted spaces. Acoustic enclosure For scenarios where noise is a critical issue, an optional Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies. Frost Protection Automatic frost protection

GBP 2208.00
1

Vent Axia Kinetic FH Heat Recovery Unit

Vent Axia Kinetic FH Heat Recovery Unit

Vent Axia Sentinel Kinetic FH Heat Recovery Unit Product Part Number Vent Axia Kinetic F Right Handed - 408167 Vent Axia Kinetic F Left Handed - 408169 Description The UK’s top selling MVHR unit for houses with a max floor area of 150m2 due to the combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features – Vent Axia FH Suitable for floor areas up to 185 m2 Delivers an airflow rate of up to 310 m³/hour @ 100 Pa Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Internal humidity sensor for automatic speed control Latest low energy EC/DC motors Digital controller on unit and optional wall mounted controller PVC Counterflow heat recovery core High heat recovery efficiency of up to 90%. Vertical or horizontal pipe connections Multiple Control options including three 0 to100% fan speed settings, nighttime quiet mode, Purge, Humidity, BMS, timer delay, 0-10v & 240v boost options 2 x G4 filters (optional M5) Low weight of only 18KG UK manufactured MVHR unit with 5 Year parts warranty through BPC Optional acoustic Top Box High Performance The Sentinel Kinetic Plus benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 185m2 With a high performance of 310 m3/hr at 100Pa while still achieving almost 90% heat recovery. The fully automatic capability of the Kinetic range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 3 x Integral infinitely variable fan speed control on supply and extract there is also an optional LCD wall mounted controller available  Spigot Options Spigots may be re-positioned from vertical to give horizontal connection or a combination of vertical and horizontal connection. Orientation This unit is available in both a right hand (external pipes to the RHS) and left-hand version (external pipes to the LHS) it is also possible to convert the orientation on site by following our instruction manual 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home BMS The Kinetics’ BMS capability is also ideal for those commercial applications where landlords or property managers want to monitor and optimise building performance and maintenance. The Kinetic BMS can provide status information and its self-diagnostics can report if any fault is found. Filtration The unit comes supplied with G4 filters with an option of upgrading the air supply filter with a G5 filter that have tool free access As many systems are placed within cupboards the unique filter design folds as you remove it to ensure easy access in restricted spaces. Acoustic enclosure For scenarios where noise is a critical issue, an optional Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies. Frost Protection Automatic frost protection effective to -20°C External Control Components Integral BMS input/output interfaces – 0-10V

GBP 1547.52
1

Vent Axia plus B

Vent Axia plus B

Vent Axia plus B Product Part Number Vent Axia Plus B Right Handed Unit - 443028 Vent Axia Plus B Left Handed Unit - 443028L(Special order only) Key Features – Vent Axia Plus B Suitable for floor areas up to 250m2 Delivers an airflow rate of up to 425 m³/hour @ 100 Pa Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Internal humidity sensor for automatic speed control Latest low energy EC/DC motors Digital controller on unit and optional wall mounted controller PVC Counterflow heat recovery core High heat recovery efficiency of up to 90%. Vertical or horizontal pipe connections Multiple Control options including three 0 to100% fan speed settings, nighttime quiet mode, Purge, Humidity, BMS, timer delay, 0-10v & 240v boost options 2 x G4 filters (optional M5) Low weight of only 24KG UK manufactured MVHR unit with 5 Year parts warranty through BPC Optional acoustic Top Box High Performance The Sentinel Kinetic Plus benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 250m2 With a high performance of 425 m3/hr at 100Pa while still achieving almost 90% heat recovery. The fully automatic capability of the Kinetic range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 3 x Integral infinitely variable fan speed control on supply and extract there is also an optional LCD wall mounted controller available  Spigot Options Spigots may be re-positioned from vertical to give horizontal connection or a combination of vertical and horizontal connection. Optional 180mm/200mm spigots can simplify connection in commercial installations where larger diameter duct work has been used. Orientation This unit is available in both a right hand (external pipes to the RHS) and left-hand version (external pipes to the LHS) it is also possible to convert the orientation on site by following our instruction manual 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home BMS The Kinetics’ BMS capability is also ideal for those commercial applications where landlords or property managers want to monitor and optimise building performance and maintenance. The Kinetic BMS can provide status information and its self-diagnostics can report if any fault is found. Filtration The unit comes supplied with G4 filters with an option of upgrading the air supply filter with a G5 filter that have tool free access As many systems are placed within cupboards the unique filter design folds as you remove it to ensure easy access in restricted spaces. Acoustic enclosure For scenarios where noise is a critical issue, an optional Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies. Frost Protection Automatic frost protection effective to -20°C External Control Components Integral BMS input/output interfaces – 0-10V proportional speed adjustment Volt free contacts 24V sensor supply Integral on/off or trickle boost function from remote switch, e.g. PIR occupancy detector Switched Live input with adjustable ‘delay-on’ feature Fan failure or component failure indicated via individual fault code display Running time counter

GBP 1660.80
1

Vent Axia Sentinel Kinetic BH Heat Recovery Unit

Vent Axia Sentinel Kinetic BH Heat Recovery Unit

Vent Axia Sentinel Kinetic BH Heat Recovery Unit Product Part Number Vent Axia Kinetic BH Right Handed Unit - 443319 Vent Axia Kinetic BH Left Handed Unit - 443319L Description The UK’s top selling MVHR unit for houses with a max floor area of 150m2 due to the combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features – Vent Axia BH Suitable for floor areas up to 150m2 Delivers an airflow rate of up to 245 m³/hour @ 100 Pa Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Internal humidity sensor for automatic speed control Latest low energy EC/DC motors Digital controller on unit and optional wall mounted controller PVC Counterflow heat recovery core High heat recovery efficiency of up to 90%. Vertical or horizontal pipe connections Multiple Control options including three 0 to100% fan speed settings, nighttime quiet mode, Purge, Humidity, BMS, timer delay, 0-10v & 240v boost options 2 x G4 filters (optional M5) Low weight of only 15KG UK manufactured MVHR unit with 5 Year parts warranty through BPC Optional acoustic Top Box High Performance The Sentinel Kinetic Plus benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 150m2 With a high performance of 245m3/hr at 100Pa while still achieving almost 90% heat recovery. The fully automatic capability of the Kinetic range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 3 x Integral infinitely variable fan speed control on supply and extract there is also an optional LCD wall mounted controller available  Spigot Options Spigots may be re-positioned from vertical to give horizontal connection or a combination of vertical and horizontal connection. Orientation This unit is available in both a right hand (external pipes to the RHS) and left-hand version (external pipes to the LHS) it is also possible to convert the orientation on site by following our instruction manual 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home BMS The Kinetics’ BMS capability is also ideal for those commercial applications where landlords or property managers want to monitor and optimise building performance and maintenance. The Kinetic BMS can provide status information and its self-diagnostics can report if any fault is found. Filtration The unit comes supplied with G4 filters with an option of upgrading the air supply filter with a G5 filter that have tool free access As many systems are placed within cupboards the unique filter design folds as you remove it to ensure easy access in restricted spaces. Acoustic enclosure For scenarios where noise is a critical issue, an optional Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies. Frost Protection Automatic frost protection effective to -20°C External Control Components Integral BMS input/output interfaces – 0-10V proportional speed adjustment Volt free contacts 24V

GBP 1209.60
1

Vent-Axia Sentinel Econiq M - 499632

Vent-Axia Sentinel Econiq M - 499632

Vent-Axia Sentinel Econiq M Product Part Number 499632 Description The Sentinel Econiq are Latest flagship and highest specification MVHR units from Vent Axia Vent Axia are the largest manufacture of heat recovery units in the UK and the Econiq L is suitable for houses with a max floor area of 270m2 With a combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options including smartphone control make this unit top of the list for all types of homes BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features Suitable for floor areas up to 270m2 Delivers an airflow rate of up to 450 m³/hour @ 150 Pa High heat recovery efficiency of up to 93%. Low weight of only 55KG Digital controller on unit with optional wall mounting kit Easy Smartphone App Commissioning Sentinel-X wireless controls platform Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Approved Document F aligned commissioning wizard Internal humidity sensor for automatic speed control Ultra Quiet Unit mounted control panel Airtight Housing Latest highly efficient soft start EC3 Motors Up to 93% heat recovery Horizontal or vertical duct connections Sound levels as low as 15.5 dB(A) Left and Right configuration via control panel Manufactured in the UK PVC Counterflow heat recovery core 2 x G3 filters and Optional ePM10 (M5) and ePM2.5 (F7) filtration Multiple Control options including 0 to100% fan speed settings, Humidity, BMS, timer delay, 0-10v & 240v boost options Filter check RF858 connectivity, 802.11b/g/n Wi-Fi and Bluetooth low energy 4.2 Optional Wall mounting kit for controller Optional HMI Kit Optional 0-10v, Co2, Temp, Humidity wired room sensors Optional wireless Temp, Humidity and 4 speed switches Optional 240v Co2, Temp, Humidity, PIR and 4 speed switches Optional AIM Alarm Interface Optional Volt free expansion board Optional 0-10v expansion board Optional Purge van integration UK manufactured MVHR unit with 5 Year parts warranty through BPC High Performance The Sentinel Econiq M benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 270m2 With a high performance of 450 m3/hr at 150Pa while still achieving almost 93% heat recovery. The fully automatic capability of the Econiq range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 4 x Integral infinitely variable fan speed control on supply and extract there is also an optional kit allowing you to remove the controller from the unit and wall mount in your chosen location There is also a pin number facility to prevent accidental resetting of commissioning settings App Control The Vent-Axia Connect smartphone application allows full control with a multitude of functions from automated to fully adjustable from the comfort of the sofa on iOS and Android smartphones Orientation This unit can be electronically changed from right to left hand orientation Spigot Options The 200mm Spigots may be re-positioned from a vertical to a horizontal connection or a combination of vertical and horizontal connection. 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home Low Noise Levels The Lo-Carbon Sentinel Econiq is one of the quietest systems on the market, with a noise level as low

GBP 2691.84
1

Vent-Axia Sentinel Econiq L - 499641

Vent-Axia Sentinel Econiq L - 499641

Vent-Axia Sentinel Econiq L Product Part Number 499641 Description The Sentinel Econiq are Latest flagship and highest specification MVHR units from Vent Axia Vent Axia are the largest manufacture of heat recovery units in the UK and the Econiq L is suitable for houses with a max floor area of 360m2 With a combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options including smartphone control make this unit top of the list for all types of homes BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features Suitable for floor areas up to 360m2 Delivers an airflow rate of up to 600 m³/hour @ 150 Pa High heat recovery efficiency of up to 93%. Low weight of only 55KG Digital controller on unit with optional wall mounting kit Easy Smartphone App Commissioning Sentinel-X wireless controls platform Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Approved Document F aligned commissioning wizard Internal humidity sensor for automatic speed control Ultra Quiet Unit mounted control panel Airtight Housing Latest highly efficient soft start EC3 Motors Up to 93% heat recovery Horizontal or vertical duct connections Sound levels as low as 15.5 dB(A) Left and Right configuration via control panel Manufactured in the UK PVC Counterflow heat recovery core 2 x G3 filters and Optional ePM10 (M5) and ePM2.5 (F7) filtration Multiple Control options including 0 to100% fan speed settings, Humidity, BMS, timer delay, 0-10v & 240v boost options Filter check RF858 connectivity, 802.11b/g/n Wi-Fi and Bluetooth low energy 4.2 Optional comfort cooling Optional Wall mounting kit for controller Optional HMI Kit Optional 0-10v, Co2, Temp, Humidity wired room sensors Optional wireless Temp, Humidity and 4 speed switches Optional 240v Co2, Temp, Humidity, PIR and 4 speed switches Optional AIM Alarm Interface Optional Volt free expansion board Optional 0-10v expansion board Optional Purge fan integration UK manufactured MVHR unit with 5 Year parts warranty through BPC High Performance The Sentinel Econiq S benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 360m2 With a high performance of 600 m3/hr at 150Pa while still achieving almost 93% heat recovery. The fully automatic capability of the Econiq range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 4 x Integral infinitely variable fan speed control on supply and extract there is also an optional kit allowing you to remove the controller from the unit and wall mount in your chosen location There is also a pin number facility to prevent accidental resetting of commissioning settings App Control The Vent-Axia Connect smartphone application allows full control with a multitude of functions from automated to fully adjustable from the comfort of the sofa on iOS and Android smartphones Orientation This unit can be electronically changed from right to left hand orientation Spigot Options The 200mm Spigots may be re-positioned from a vertical to a horizontal connection or a combination of vertical and horizontal connection. 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home Low Noise Levels The Lo-Carbon Sentinel Econiq is one of the quietest systems on the

GBP 3171.84
1

Vent-Axia Sentinel Econiq S - 499883

Vent-Axia Sentinel Econiq S - 499883

Vent-Axia Sentinel Econiq S Product Part Number 499883 Description The Sentinel Econiq are Latest flagship and highest specification MVHR units from Vent Axia Vent Axia are the largest manufacture of heat recovery units in the UK and the Econiq S is suitable for houses with a max floor area of 210m2 With a combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options including smartphone control make this unit top of the list for all types of homes BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features Suitable for floor areas up to 210m2 Delivers an airflow rate of up to 350 m³/hour @ 150 Pa High heat recovery efficiency of up to 93%. Low weight of only 32KG Digital controller on unit with optional wall mounting kit Easy Smartphone App Commissioning Sentinel-X wireless controls platform Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Approved Document F aligned commissioning wizard Internal humidity sensor for automatic speed control Ultra Quiet Unit mounted control panel Airtight Housing Latest highly efficient soft start EC3 Motors Up to 93% heat recovery Horizontal or vertical duct connections Sound levels as low as 15.5 dB(A) Left and Right configuration via control panel Manufactured in the UK PVC Counterflow heat recovery core 2 x G3 filters and Optional ePM10 (M5) and ePM2.5 (F7) filtration Multiple Control options including 0 to100% fan speed settings, Humidity, BMS, timer delay, 0-10v & 240v boost options Filter check RF858 connectivity, 802.11b/g/n Wi-Fi and Bluetooth low energy 4.2 Optional Wall mounting kit for controller Optional Acoustic enclosure and Top Box (S only) Optional HMI Kit Optional 0-10v, Co2, Temp, Humidity wired room sensors Optional wireless Temp, Humidity and 4 speed switches Optional 240v Co2, Temp, Humidity, PIR and 4 speed switches Optional AIM Alarm Interface Optional Volt free expansion board Optional 0-10v expansion board Optional Purge van integration UK manufactured MVHR unit with 5 Year parts warranty through BPC High Performance The Sentinel Econiq S benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 220m2 With a high performance of 350 m3/hr at 150Pa while still achieving almost 93% heat recovery. The fully automatic capability of the Econiq range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 4 x Integral infinitely variable fan speed control on supply and extract there is also an optional kit allowing you to remove the controller from the unit and wall mount in your chosen location There is also a pin number facility to prevent accidental resetting of commissioning settings App Control The Vent-Axia Connect smartphone application allows full control with a multitude of functions from automated to fully adjustable from the comfort of the sofa on iOS and Android smartphones Orientation This unit can be electronically changed from right to left hand orientation Spigot Options The 200mm Spigots may be re-positioned from a vertical to a horizontal connection or a combination of vertical and horizontal connection. 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home Low Noise Levels The Lo-Carbon Sentinel Econiq is one of the

GBP 1902.72
1