41 results (0,17446 seconds)

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Special Offer - Domus CMX-MULTI MEV Unit

Special Offer - Domus CMX-MULTI MEV Unit

Special Offer - Returned Unit, Fully working and in new condition Domus CMX-MULTI MEV Unit This mechanical extraction ventilation unit is ideal for residential applications, the Domus CMX-MULTI is a unit adapted for installation horizontally or vertically, allowing flexible placement. This unit has a depth of 125mm, making it ideal for areas where space is restricted, such as small ceiling voids. The CMX-MULTI is designed for use in small to medium-sized houses and apartments. The 204x60mm duct connections can be converted to round ducting via the use of additional adaptors if required. Key Features Integral humidistat Very compact, only 125mm deep Very lightweight, 2 years standard parts warranty This unit is available with or without a humidity sensor This unit can be mounted on the floor, wall or ceiling Technical Features Fantastic SFP as low as 0.14 (W/l/s) Max Extract Volume of 409mᶟh Dimensions: 595 x 340 x 125 (mm) 3 inlet spigots at 204x60mm Weight 3.1kg This unit has a low energy, high efficiency EC backward curved centrifugal impeller fan/motor assembly with sealed-for-life bearings suitable for +50°C to -25°C Construction The outer casing is manufactured from expanded polypropylene, reducing both weight and system noise. Due to its compact size, it allows flexible installation Domus CMX-Multi MEV units can be installed horizontally or vertically and is ideal to be fitted inside kitchen/utility room cupboards, directly into a ceiling or loft space or within a joist space.

GBP 270.00
2

Vent-Angel Ventilation Fire Safety Unit

Vent-Angel Ventilation Fire Safety Unit

Vent-Angel Ventilation Fire Safety Unit Product Part Number Vent-Angel Fire Safety Unit - QV-VA-21 Description The Vent-Angel is suitable for domestic homes and apartments and connects to any domestic fire alarm and will in the unfortunate event of a fire will remove the power supply to any type of Ventilation unit. The Vent-Angel unit can also control mains powered fire dampers, Purge fans or other devices The Vent -Angel is simple to install and comes complete with a discrete wall mounted control panel to test and reset the system. Why Use a Vent-Angel If a fire breaks out there is a possibility that any system that supplies fresh air could further cause the fire to intensify and spread. If even a small fire breaks out the smoke will enter the ventilation unit’s ductwork that could be very costly to remove any contaminants and smell. Control Panel The Vent-Angel includes a Test / Rest switch plate which would be mounted remotely in a location that has easy access (i.e. Hallway, Utility room), the switch plate also has LED operational indication. i.e. the Test push button with be illuminated Green under normal running conditions and the Reset push button will be illuminated Red in the event of a fault. The Test / Reset switch plate will also allow the system to be tested by pushing the TEST button. (It is recommended that this test is carried out twice yearly), to Reset the system press the RESET button, this action is also required if the system has been activated. Please ensure all Smoke/Fire Alarm issues have been resolved before activating the Vent Angel system. Contents: 1 x Vent Angel unit 1 x Vent Angel Test/Reset switch plate 1 x 15m length of 9 core YY cable 1 x 4mm O ring crimp 2 x Lockable Glands (FUW optional Fire Damper / Purge unit)

GBP 204.00
1

DucoBox Silent UK MEV Unit with Humidity Sensor

DucoBox Silent UK MEV Unit with Humidity Sensor

Part no: 0000-4490 DucoBox Silent MEV Unit with Humidity Sensor The DucoBox silent Uk is a high quality MEV unit that extracts continually from the kitchen and bathrooms to one central unit to provides a quiet and efficient ventilation system Demand controlled with an internal humidity sensor that will automatically increase the speed to lower high humidity levels Manufactured in Belgium and developed with double wall construction to provide the quietist MEV available in Europe With a high performance of 400 m3/hr. this unit is ideally suited for high quality new builds or high-end renovations with up to 7 extract points The DucoBox silent has 7 x125mm connections and 1 x 125mm outlet With the optional Q-V adaptors this unit is also suitable with the use of up to 7 x 90mm crushproof radial ductwork connections with antibacterial lining that will lower the installation time and comply to the latest building control regulations BPC are MEV specialists and the original developers of MEV kits in the Uk and Ireland with lifetime technical support on our top-quality systems   Demand Controlled Ventilation Historically, MEV-units used to run continuously: 24 hours a day, 7 days a week. At a single set speed This was deemed to be “ok” so the energy losses were deemed to be small. DUCO feels that this “old school”-way-of-thinking is a thing of the past and decided to go a step beyond the “normal” operation mode of a “traditional” MEV system. DUCO offers true “on demand” solutions which result in true energetically optimised ventilation solutions: To only ventilate, when necessary, where it is necessary and as long as it is necessary! The DucoBox Silent has an internal humidity sensor that detects high humidity and increases the performance until the set level is reached again It is also possible to install a CO2 box sensor inside the DucoBox Silent UK With an “on demand” DUCO-system, the occupant can always be assured to breathe the best possible indoor air, whilst also using the least amount of energy! DUCO brings you the SMARTEST ventilation solutions! Silent Plus Kit The Silent Plus Kit provides additional acoustic damping of up to 3 dB(A)! The kit consists of three acoustic composite foam pads and three acoustic caps that are placed into the predesigned inserts inside the unit  Quiet-Vent adaptors The Quiet-Vent 125 to 90 adapters allow you to connect the 90mm radial pipe directly to the unit avoiding the use of a distribution box that will provide many benefits over using solid rigid ducting Up to 7 number 90mm radial ducts can be used on the unit This option will reduce installation time over solid rigid duct, reduce cost as there is no need for a distribution box, and comply with the latest building control requirements  Fault Indicator With the optional wall mounted fault indicator, you can be notified by colored indicator light when a fault is detected (max one per unit)  Boost switch A boost switch will allow the user to manually increase or decrease the speed, there is a manual 2 speed and 3 speed switches available Only one boost switch is recommended per unit and if the speed is set to high it will override any sensors and remain at that speed till manually reset to a lower speed A boost switch is required to commission the unit

GBP 345.20
1

Vent Axia Lo-Carbon Multivent MVDC-MS unit

Domus CMX-S MEV Unit

Domus CMX-S MEV Unit

Domus CMX-S MEV Unit Product Part Number Domus CMX-S MEV unit - CMX-S Description Previously known as the Polypipe or Silavent Green Line CMX At just 125mm in depth, the CMX is one of the most versatile, easy to install and energy efficient MEV solutions available on the market. Ideal for installation in a wide range of properties, the CMX offers a depth of just 125mm, making it ideal for small ceiling voids or for where space is restricted. Fits into ceiling voids and utility cupboard spaces – horizontally or vertically The 220x90 duct connectors can be converted to 150 round using additional adaptors if required. Technical Features Max Airflow of 430m3/h Specific Fan Power (SFP) as low as 0.24 wls Dimensions (mm) 710 long x 340 wide x 125 high Fitted with two 220x90 duct connections allowing quick connection to ducts Suitable for a floor area up to 275m² The appliance has a low energy, high efficiency EC backward curved centrifugal impeller fan/motor assembly with sealed for life bearings suitable for +50ºC to -25 ºC. Also referred to as System 3 in Approved Document F of the Building Regulations, an MEV system consists of a centralised ventilation unit that continuously extracts waste, polluted and moist air from wet rooms and can be discreetly positioned in either a cupboard, utility room, ceiling or loft space. An MEV system can be ducted throughout the dwelling and operated by the homeowner through a range of control options. Controllability Typically dual speed, MEV systems provide both low speed continuous trickle ventilation and high-speed boost flow when required. Replacement fresh air is drawn into the dwelling through background ventilators i.e. air inlets, located in the living areas. The potentiometer-controlled speed selector allows accurate setting of 3 airflow speeds The unit has 3 fully variable speeds for trickle and boost,  A switched live (LS) can also be used to select boost speed  An additional third speed (purge) is available using a second switched live connection. Construction PVC outer casing with an acoustic lining is included as standard, ensuring minimum noise levels. Accessories ANC848A Manual LOW/BOOST switch Manual BOOST selection switch. LOW speed is engaged upon connection of mains supply. Both speeds are manually adjustable at the wiring centre to facilitate Building Regulation commissioning speeds. ANC849A Manual

GBP 386.03
1

BSK Zephyr Single Room Heat Recovery Unit

BSK Zephyr Single Room Heat Recovery Unit

Description With advanced features such as built-in Wi-Fi, remote control and app control, the BSK ZEPHYR V2 is a future-proof solution that offers functions that are otherwise only seen on much more expensive models. Manufactured in Turkey to a very high quality this unit is popular throughout Europe and as we have sold 1000s of these units, we can say that this is the best value single room unit available How does it work BSK Zephyr can recover heat by using a 2-way fan heating and cooling of the ceramic heat exchanger inside. The device operates on a cycle that extracts and supplies air in periods of 70 seconds. While the air is extracted out from the room, the ceramic heat exchanger will be heated, when the air flow direction is reversed and fresh air from outside is supplied to the room, thanks to the heat stored in the ceramic core, it will be blown inside in a conditioned manner. BSK Zephyr, whose power consumption does not exceed a few watts and can reach 90% thermal efficiency, also allows you to save energy while meeting your ventilation needs. You can connect multiple devices to each other via wi-fi, and you can control your devices with the included IR remote. BPC are MVHR specialists and the original developers of MVHR kits in the Uk and Ireland with lifetime technical support on our top-quality systems, Key Features – BSK Zephyr (v2) High heat recovery efficiency of up to 90%. App control via phone App (v2) IR handheld speed controller supplied with unit Wi-Fi pairing between and programming between units Internal humidity sensor 4 speed settings Delivers an airflow of 15 - 60m³ per hour (16 l/s), Suitable for areas up to 50m². Ultra Quiet energy efficient Motor 24-48 dBa Easy to service filters Ceramic heat recovery core Anti draft damper when not in use Optional External colored cowls available Optional Thin wall cowl available 24-month warranty Easy to install Detailed Info App Control It is now possible to control all the ZEPHYR devices and features in the house via a user-friendly app. Handheld IR controller The unit comes with an IR remote control that allows you to control all the features on the one unit or any other additional units simultaneously Wi-Fi Built-in Wi-Fi enables wireless pairing of multiple devices across your house, when paired devices will run either in parallel or in reverse depending on your setup. When the primary device is in ventilation mode, all parallel devices will also follow, while the reverse devices will be in exhaust mode. This way you can have continuous ventilation and aspiration and create air drafts inside or across rooms to increase the effectiveness of ventilation. You can set different settings and speeds for different rooms and create various ventilation zones. Humidity control Integral humidity sensor with 3 humidity monitoring levels. When a set humidity is reached, the device will enter exhaust mode to dispense excess humidity. Speed Control 4-speed settings from 15 m3/hr. to 60 m3/hr. including a night mode for silent operation 3 Ventilation Modes Set your unit up for any situation with a press of a button and will allow for either heat recovery of up to 90% or simply extract warm or humid air or even just supply fresh air in from outside Energy Use Unparalleled A+ rated 4-speed high-performance motor that uses as little as 1.2 watts of energy on night-time mode and only 6.3 watts on high boost Silent Operation True silent operation with an ultra-low 3.6 dBA on night-time mode and 27.3 dBA on high boost Heat Recovery The heat of the unit is a quality ceramic heat recovery core that provides long-term performance of up to 90% heat recovery Filters & Maintenance The system has been designed with extra quick and easy servicing of the two filters as the core and filters can be removed and cleaned without any tools or removing the outer covers Anti-draft During operation, the inner grille will open depending on the chosen airflow rate and if the unit is not being used the grille will close over with a foam seal Easy to install To provide a quiet and efficient unit the pipe diameter is 160mm and due to the new telescopic wall liner can be used as standard on walls from 250mm to

GBP 216.00
1

Vent Axia Lo-Carbon Multivent MVDC-MSH unit with Humidity Sensor

Vent Axia Lo-Carbon Multivent MVDC-MSH unit with Humidity Sensor

Vent Axia Lo-Carbon Multivent MVDC-MSH unit with Humidity Sensor Product Part Number Vent Axia MVDC-MSH - 443298 Key Features Internal Humidity sensor Ultra-quiet - acoustically lined for low noise levels Recognised in SAP Appendix Q Complies with Building ADF (System 3) Option of wall, ceiling, and loft mounting Improved controllability The unit has Long life, low energy multispeed DC motor Ceiling, wall, or floor Installation is recommended  PVC outer casing with an acoustic lining is included as standard, ensuring minimum noise levels. Technical Features Max Airflow of 350m3/h Best in class Specific Fan Power (SFP) as low as 0.15 wls Dimensions (mm) 330 long x 391 wide x 248 high Fitted with four extract 125 or 100mm diameter spigots allowing quick connection to ducts Switched Live Boost connection Fully variable normal and boost speeds Fully serviceable unit with all parts accessible 2-year standard or optional 5-year parts warranty Controllability The potentiometer-controlled speed selector allows accurate setting of airflow The unit has 2 fully variable speeds for trickle and boost, with an inbuilt humidistat activation for the boost speed. A switched live (LS) can also be used to select boost speed when wired through an Isolator Relay (Part No. 442030 - not supplied). An additional third speed (purge) is available using a second switched live connection. MVDC-MS H (443298) the Boost setting is activated by the internal humidity sensor. The internal humidity sensor uses one of the two available LS inputs, the other remaining LS input can be used to switch the unit to Purge speed.  MVDC-MS H has the option to switch from Normal to Boost speed (in effect over-riding the internal humidity sensor), this can be achieved by connecting an isolated switched live connection to the LS connection on the power supply terminal block. This must be isolated by using, for example an Isolator Relay Control, Vent-Axia part number 442030, or similar. Isolator relay controller, Vent-Axia part number 442030

GBP 204.00
1

Nuaire DRI ECO LC PIV

Nuaire DRI ECO HC PIV

Nuaire VSC Controller for MVHR

Nuaire ECO Anti-Vibration Mounting Kit(AV2)

Vent Axia HR100R/RS

Mitsubishi VL100EU5-E Lossnay Wall Mounted Single Room MVHR

Vent Axia Lo-Carbon Multivent MVDC-MS

Vent Axia Lo-Carbon Multivent MVDC-MS

Vent Axia Lo-Carbon Multivent MVDC-MS - VMSMEVPK The Multivent continuous mechanical extract ventilation range is designed for the simultaneous extraction of up to several bathrooms/ Wet Rooms to a centrally positioned unit normally installed in the attic space Complete DIY Kit of a Vent Axia MVDS-MS multiple room extraction unit with insulated Flexible Ducting and fittings suitable for extraction of 7 separate areas Our Comprehensive DIY Kits have everything you should require installing the system to building control regulations   Please note - You can purchase the MEV unit with or without the ductwork on this listing Key Features Vent Axia MVDC-MS multi room extraction unit Any products not required can be returned for full refund (excluding return delivery cost) Any extra products required will be discounted to the Kit Price (excluding delivery) Variable speed settings Ultra-quiet - acoustically lined for low noise levels Complies with Building ADF (System 3) Option of wall, ceiling, and loft mounting Improved controllability The unit has Long life, low energy multispeed DC motor PVC outer casing with an acoustic lining is included as standard, ensuring minimum noise levels With a DC motor the Multispeed Multivent is one of the most efficient central extract units in the UK. The Multivent MVDC MS offers the option of ‘Close Control’ both in the residential and the commercial sectors.  Technical Features Max Airflow of 350m3/h Best in class Specific Fan Power (SFP) as low as 0.15 wls Dimensions (H x W x D) 310mm x 360mm x 249mm Fitted with four extract 125 or 100mm diameter spigots allowing quick connection to ducts Recognised in SAP Appendix Q Switched Live Boost connection Fully variable normal and boost speeds Fully serviceable unit with all parts accessible 2-year standard or optional 5-year parts warranty  Controllability The potentiometer-controlled speed selector allows accurate setting of airflow The unit has 2 fully variable speeds for trickle and boost, with an inbuilt humidistat activation for the boost speed. A switched live

GBP 288.00
1

Vent Axia Pozidry Pro

Vent Axia Pozidry Pro

Vent Axia Pozidry Pro Product Part Number Vent Axia Pozidry Pro - 476310 All the Technical Things Selectable air capacities to suit floor areas up to 200m2 IPX2 rated Uses the latest lo-carbon motor technical for low running costs Ultra-low sound level Complete with ceiling diffuser, flexible duct, and worm drive clips Anti-vibration legs offer flexibility when fitting and guarantee silent running Flexible feet allow the unit to be installed across two joists or along a joist offering simple, easy installation Moulded handle makes carrying the unit safe and simple, allows you to change the pitch of the PIV if hanging kit is used Pozidry Pro is unique in offer F7 filters which filter down PM2.5 including diesel particulates Smart Sense technology is easy to set up with smart data logging capabilities all access via the intuitive 3 button menu This unit uses a sensor to monitor the temperature in the loft The Lo-Carbon PoziDry Pro features a specially developed Lo-Carbon DC fan/motor arrangement which runs quietly and delivers incredibly low running costs of less than £3 per year to run, the motor operating temperature is -25/40°c Performance The Lo-Carbon PoziDry pro uses a sensor to monitor the temperature in the loft, automatically adjusting the air volume when necessary. The unit will continuously ventilate silently in the background whilst in ‘Trickle’ mode. Once the unit automatically senses excess heat being lost into the loft the airflow will increase to ‘Normal’ mode to recover heat that would otherwise be lost through the roof. During summer months should the loft exceed 27°C the unit will enter ‘stand-by’ mode in order stop the circulation of warm air allowing for a more comfortable living environment. PoziDry Pro Heater models automatically turn on the 500W heater to boost air temperature by 10°C during colder months. Under assessment with BBA. Controllability The unit can be controlled by Smart Sense™ Technology – Easy set up and smart data logging capabilities all accessed via the intuitive 3 button menu on the unit Speed control selection is easy. Once house size is selected based on number of bedrooms, PoziDry Pro automatically selects the correct Trickle and Normal speeds. Should you need to adjust speed manually this can be done easily. Data Logger allows the unit to record how long it has been running in each of its speeds. It also measures the number of days the product has been switched on to provide precise running information. Smart Sense technology can also record the duration of heater activity and energy used Installation The Lo-Carbon PoziDry Pro is uniquely flexible in its

GBP 342.00
1

Vent-Axia Lo-Carbon Heat Save

Vent-Axia Lo-Carbon Heat Save

Vent-Axia Lo-Carbon Heat Save Product Part Number Vent-Axia Lo-Carbon Heat Save - 496036 Vent-Axia Wired Zone Control Panel - 496037 Description Through-The-Wall Heat recovery Unit The Vent-Axia Lo-Carbon Heat Save is a ventilation unit designed for living rooms and bedrooms in single and multi-family buildings. The unit is usually located in an exterior wall to provide new air to the room. The Vent-Axia Lo-Carbon Heat Save uses a reversible fan to extract dirty air from the room and replace it with outside air 70 seconds later. This air passes through a filter to ensure that clean air enters the room. These systems work best in pairs as when one unit is extracting, the other can be supplying air to provide a balanced ventilation system. They are controlled by a SENWZP Sentinel wired zone controller which can operate up to 8 units in synchronization. This provides a single room or whole house balanced ventilation system with heat recovery. As well as filtering the air, the Vent-Axia Lo-Carbon Heat Save uses a thermal accumulator to extract warmth from the outgoing air and uses it to temper the incoming air to avoid the feeling of cold drafts and recover heat that would otherwise be lost to the outside. Typical Installation The Vent-Axia Lo-Carbon Heat Save can be fitted in a 180mm diameter hole. Maximum wall thickness is 460mm or 745mm with optional wall tube (see accessories). The wall sleeve length (included up to 460mm) can be cut down to size to fit any wall thickness. Vent-Axia Lo-Carbon Heat Save units work best in pairs. When one unit is extracting, the other can be supplying air to provide a balanced ventilation system. They alternate direction every 70 seconds when the thermal accumulator on the extract unit has warmed up allowing the supply air to benefit from these thermal gains. They are controlled by a SENWZP Sentinel wired zone controller. This is fully modular and controllable with customized ventilation profiles available so that every room in the home can have the perfect ventilation.

GBP 413.62
1

Vent-Axia PureAir 260 X

Nuaire ECO MEV