10 results (0,12271 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Airflow ISO Thermal Pipe 160mm

Airflow ISO Thermal Pipe 160mm

Airflow ISO Thermal Pipe Product Part Number 160mm  ISO Pipework x 1 meter - 90000505 Description Typically used to connect MVHR unit and distribution boxes and to outside for venting To be used with airflow ISO Pipe and Fittings only  Expanded Polypropylene (EPP) is a highly versatile closed-cell bead foam that provides a unique range of properties. The pipework is tough, durable and fire retardant to B2. Please note that this pipe can be damaged if heavy weight is applied. Available Sizes 1 x meter of 160mm

GBP 41.83
1

Special Offer - Domus Firestop Oversleeve

Special Offer - Domus Firestop Oversleeve

Special Offer - Domus Firestop Oversleeve   Semi-Rigid Duct Fire-Stopping Sleeve Domus Radial systems are a clever plug and play whole house ventilation solution, which use manifold distribution to evenly service each room through semi-rigid duct. These systems incorporate a centralised mechanical unit; either a Mechanical Ventilation with Heat Recovery (MVHR) or Mechanical Extract Ventilation (MEV). Perfect ventilation choice for all residential dwellings Installation The simple plug and play mechanism between the semi-rigid duct and manifold, as well as the plenum’s clip-on fixing system, make Domus Radialultra-quick to install. As directed in our simple online step-by-step installation guide, the only tools you will require are: Pozidrive screw driver Cutting tool Long reach spanner* Allen key

GBP 24.00
1

Domus 2x75mm Plenum with Flow Control

Domus 2x75mm Plenum with Flow Control

Domus 2x75mm Plenum with Flow Control with seals Product Part Number Domus Plenum 2x75mm with Flow Control - RDOP-125FC Description Domus Radial systems are a clever plug and play whole house ventilation solution, which use manifold distribution to evenly service each room through semi-rigid duct. These systems incorporate a centralised mechanical unit; either a Mechanical Ventilation with Heat Recovery (MVHR) or Mechanical Extract Ventilation (MEV). Perfect ventilation choice for all residential dwellings Installation The simple plug and play mechanism between the semi-rigid duct and manifold, as well as the plenum’s clip-on fixing system, make Domus Radialultra-quick to install. As directed in our simple online step-by-step installation guide, the only tools you will require are: Pozidrive screw driver Cutting tool Long reach spanner* Allen key

GBP 31.93
1

Quelfire Round Fire Collar Range

Quelfire Round Fire Collar Range

Quelfire Round Fire Collar Range Product Part Number QF 75 / 82mm Fire Collar - QWR75/CE QF 110mm Fire Collar - QWR110/CE QF 125mm Fire Collar - QWR125/CE QF 160mm Fire Collar - QWR160/CE QF 204 / 60mm Fire Collar - QWR204/60 Composition The QWR Fire Collars consist of a continuous pressed stainless steel flexible shell containing high performance graphite based intumescent material which reacts under the influence of heat to exert pressure on the pipe as it softens to form a carbonaceous char which provides an effective insulation plug thus preventing fire passing through to the adjoining compartment. The QWR Fire Collar has built in fixing lugs which are used to secure it to the structure. Durability Tested to Type X durability which means the QWR Fire Collars can be installed in conditions exposed to weathering.   Installation Information Quelfire QWR Fire Collars should be used where a plastic pipe penetrates a fi re rated wall or floor. For vertical pipework, one unit should be installed to the underside of the floor. For horizontal pipework one unit should be fitted to both sides of the wall. The surface of the wall must be clean and free of loose debris/dust and any irregularities between the QWR and the wall, and between the pipe and wall, should be filled by applying QuelStop Intumescent Acrylic Sealant. Holes for the pipes should be drilled as close as possible to the outside diameter of the plastic pipes and are described in the “performance” table later in this document. If the holes are drilled too large then QF2 Fire Protection Compound or QuelStop Fire Batt will be required or even an alternative system such as an Intuwrap so care and communication between trades is the key to a simple installation. The QWR Fire Collar should be fed around the plastic pipe, securing the ends together by passing the tongues on one end through the slots on the other end. The tongues should then be bent back and the unit secured to the structure using the correct fixings through all the lugs. (It is not a tested solution to not use all the lugs so space so should be allowed for the fixing of the QWR Fire Collar during design and installation of the pipework.) A full set of installation details and a step by step guide are available and we recommend you check all available data before commencing installation but in principle the QWR Fire Collar can be fixed as follows: To concrete and masonry walls and floors usingM8x60mm steel sleeve anchors. To plasterboard fire rated partitions using throughbolts or M6x65mm steel hollow wall anchors (to suit the correct plasterboard thickness). To QuelStop Fire Batt using steel pigtail screws. Quelfire QWR Fire Collars have also been tested generally in accordance with the BS EN 1366-3 fitted to a plasterboard ceiling/timber floor both direct to the plasterboard and also in conjunction with pattress fitted QuelStop Fire Batt. Available Sizes 75/82mm 100mm 125mm 160mm 204/60mm

GBP 18.25
1

Ducting Condensation Trap

Ducting Condensation Trap

Ducting Condensation Trap Product Part Number 100mm PVC Condensation Trap - CD100 125mm PVC Condensation Trap - CD125 Description For Control of condensation/moisture In ducted ventilation systems Condensation will occur when warm, humid air extracted from the bathroom, shower, kitchen or utility room hits the cooler surface of your ventilation duct. If the extracted air is significantly cooled and you have a vertical pipe the moisture will condense back to water and become trapped in your ducting, potentially causing damage to the fan and property. Systems using Roof Vents or Ducting rising vertically carrying extract air to outside benefit with the use of a condensate trap, this is to prevent any moisture forming inside the ductwork, dropping back down and into the fan unit. This should then be connected to a suitable soil vent pipe using a 21.5mm overflow pipe.  Constructed of PVC Compatibility Compatible with most manufactures including   100mm 125mm 150mm Verplas VKC434 VKC445 -  Vent-Axia 563516 455191 455190 Manrose  1440  1450  1460 Domus 497

GBP 18.70
1