22 results (1,66141 seconds)

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Domus HRX-E AURA Heat Recovery Unit

Domus HRX-E AURA Heat Recovery Unit

Domus HRXE-AURA-H Opposite Handed - HRXE-AURA-OPH   Description The Domus HRXE-AURA-H provides a maximum flow rate of 320m3/hr suitable for a house up to 190 m2 floor area with up to 5 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems Integral Humidity Sensor The Domus unit has an Internal Humidity sensor that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Domus units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Domus units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Domus units can be right or left-handed and correct orientation should be checked before purchase  Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket AV (anti vibration mounting kit) - HRXE-AURA-AV  The optional anti vibration kit can be used for both wall and floor Tank Stand The MVHR unit can be positioned on the optional tank stand using the Anti-vibration tray assembly discarding the angle brackets. (7) Angled Brackets The unit can be installed above the floor on a wall angled bracket (8) Accessories Condensation Drain – 397 Aura Replacement filters SPR428  

GBP 1480.66
1

Domus HRXE-ZEUS

Domus HRXE-ZEUS

Domus HRXE-ZEUS Product Part Number Domus HRXE-ZEUS-H Opposite Handed - HRXE-ZEUS-OPH Description The Domus HRXE-ZEUS-H provides a maximum flow rate of 550m3/hr suitable for a house up to 330 m2 floor area with up to 10 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems Integral Humidity Sensor The Domus unit has an Internal Humidity sensor that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Domus units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Domus units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Domus units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket AV (anti vibration mounting kit) - HRXE-XEUS-AV The optional anti vibration kit can be used for both wall and floor Tank Stand The MVHR unit can be positioned on the optional tank stand using the Anti-vibration tray assembly discarding the angle brackets. (7) Angled Brackets The unit can be installed above the floor on a wall angled bracket (8) Accessories Condensation Drain – 297 ZEUS Replacement filters SPR459  

GBP 2935.30
1

Domus HRX-E HERA Heat Recovery Unit

Domus HRX-E HERA Heat Recovery Unit

Domus HRX-E HERA Heat Recovery Unit Product Part Number Domus HRXE-HERA-H Opposite Handed - HRXE-HERA-OPH Description The Domus HRXE-HERA-H provides a maximum flow rate of 288m3/hr suitable for a house up to 172 m2 floor area with up to 5 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, Integral Humidity Sensor The Domus unit has an Internal Humidity sensor that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Domus units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Domus units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Domus units can be right or left-handed and correct orientation should be checked before purchase  Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket AV (anti vibration mounting kit) - HRXE-HERA-AV The optional anti vibration kit can be used for both wall and floor Tank Stand The MVHR unit can be positioned on the optional tank stand using the Anti-vibration tray assembly discarding the angle brackets. (7) Angled Brackets The unit can be installed above the floor on a wall angled bracket (8) Accessories Condensation Drain – 297 HEAR Replacement filters SPR428  

GBP 1270.67
1

Zehnder Caladair Freetime First Eco 3500

Zehnder Caladair Freetime First Eco 3500

Zehnder Caladair Freetime First Eco 3500 Product Part Number Caladair FREETIME 3500 First Eco - CAL24 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability: A Digital control panel is available if not connecting to a BMS system  LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use

GBP 10163.09
1

Zehnder Caladair Neotime 900 First Eco MVHR Units

Zehnder Caladair Neotime 900 First Eco MVHR Units

Zehnder Caladair Neotime 900 First Eco MVHR Units Product part Number Caladair NEOTIME 900 First Eco - CAL02 Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system  LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use Motors

GBP 5728.94
1

Zehnder Caladair Neotime 1300 First Eco MVHR Units

Zehnder Caladair Neotime 1300 First Eco MVHR Units

Zehnder Caladair Neotime 1300 First EcoMVHR Units Product Part Number Caladair NEOTIME 1300 First Eco - CAL03 Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system  LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use Motors

GBP 7563.25
1

Zehnder Caladair Neotime 600 First Eco MVHR unit

Zehnder Caladair Neotime 600 First Eco MVHR unit

Zehnder Caladair Neotime 600 First Eco MVHR Units Product Part Number Caladair NEOTIME 600 First Eco - CAL01 Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability: A Digital control panel is available if not connecting to a BMS system  LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use Motors

GBP 4630.70
1

Zehnder Caladair Freetime First Eco 800

Zehnder Caladair Freetime First Eco 800

Zehnder Caladair Freetime First Eco 800 Product Part Number Caladair FREETIME 800 First Eco - CDF024149 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system  LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use

GBP 5205.10
1

Zehnder Caladair Carma 9023 First Eco

Zehnder Caladair Carma 9023 First Eco

Zehnder Caladair Carma 9023 First Eco Product Part Number Caladair CARMA 9023 L First Eco - CAL15 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system  LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can

GBP 11451.71
1

Zehnder Caladair Carma 9016 First Eco

Zehnder Caladair Carma 9016 First Eco

Zehnder Caladair Carma 9016 First Eco Product Part Number Caladair CARMA 9016 L First Eco - CDF026370 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system  LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can

GBP 9669.13
1

Zehnder Caladair Neotime 2500 First Eco MVHR Unit

Zehnder Caladair Neotime 2500 First Eco MVHR Unit

Zehnder Caladair Neotime 2500 First Eco MVHR Unit Product Part Number Caladair NEOTIME 2500 First Eco - CAL05 Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system  LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use Motors

GBP 9734.34
1

Zehnder Caladair Neotime 1800 First Eco MVHR Units

Zehnder Caladair Neotime 1800 First Eco MVHR Units

Zehnder Caladair Neotime 1800 First Eco MVHR Units Product Part Number Caladair NEOTIME 1800 First Eco - CAL04 Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system  LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use Motors

GBP 8485.09
1

Zehnder Caladair Carma 9008 First Eco

Zehnder Caladair Carma 9008 First Eco

Zehnder Caladair Carma 9008 First Eco Product Part Number Caladair CARMA 9008 L First Eco - CAL12 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system  LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use

GBP 7225.98
1

Zehnder Caladair Freetime First Eco 2000

Zehnder Caladair Freetime First Eco 2000

Zehnder Caladair Freetime First Eco 2000 Product Part Number Caladair FREETIME 2000 First Eco - CDF024151 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability: A Digital control panel is available if not connecting to a BMS system  LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat

GBP 8155.37
1

Zehnder Caladair Carma 9010 First Eco

Zehnder Caladair Carma 9010 First Eco

Zehnder Caladair Carma 9010 First Eco Product Part Number Caladair CARMA 9010 L First Eco - CAL13 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system  LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use

GBP 8181.46
1

Zehnder Caladair Freetime First Eco 1500

Zehnder Caladair Freetime First Eco 1500

Zehnder Caladair Freetime First Eco 1500 Product Part Number Caladair FREETIME 1500 First Eco - CDF024150 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability: A Digital control panel is available if not connecting to a BMS system  LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use

GBP 7195.09
1

Zehnder Caladair Freetime First Eco 2700

Zehnder Caladair Freetime First Eco 2700

Zehnder Caladair Freetime First Eco 2700 Product Part Number Caladair FREETIME 2700 First Eco - CAL23 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system  LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use

GBP 7906.39
1

Zehnder Caladair Carma 9035 First Eco

Zehnder Caladair Carma 9035 First Eco

Zehnder Caladair Carma 9035 First Eco Product Part Number Caladair CARMA 9035 L First Eco - CAL16 Description Additional Zoning options Optional extras are available to be able to control zones via Caladair Commercial Units. Zones are controlled with electric duct dampers that can be operated by a few solutions: PIR sensor – will detect occupation and increase airflow Co2 sensor – will detect high levels of Co2 and increase airflow Wall switch – increase airflow by pressing switch Light – increase airflow when the light is switched on BMS – increase or decrease zoned areas and unit by BMS system The dampers can also be set to various airflow rates when open or close Please contact us on 028 2827 5150 for more options on how to add these extras to your system Heating & Cooling Available heating and cooling accessories include: Electric Preheater to prevent frost affecting the unit Electric Post heater to increase room temperature Water heater that can be used as heater a pre or post heater Controllability A Digital control panel is available if not connecting to a BMS system  LCD controller functions Weekly timer Holiday timer Summer by-pass night-time cooling Fault finding Speed Parameters Filter indicator Fire alarm integration Temperature sensors Possible integration via Mobus, Bacnet or web Filtration 1x F7 large capacity pollen intake filter and 1 x G4 extract filter Construction Outer construction is of airtight 10-gauge galvanised steel double-skin panels with an internal 25mm high density mineral wool insulation in accordance with EN1886 The external face is pre-lacquered with a protective film in colour RAL 7035 Circular branch connections with rubber seals airtight construction to (ATEC CSTB n° 13-224-12). Crimped hanging brackets to enable ceiling mounting Heat Exchanger Highly efficient aluminium counter-flow heat exchanger that can provide up to 90% heat recovery and designed for lifetime use

GBP 14289.97
1

Airflow DV65 Entro MVHR Unit

Airflow DV65 Entro MVHR Unit

Airflow DV65 Entro MVHR Unit Product Part Number DV65 Entro-V Unit - 90001243 DV65 Entro-V Unit with Basic Controller - 90001309 DV65 Entro-V Unit - with Digital Controller - 90001312 Description The DV65 Entro-V is a highly efficient, top entry MVHR unit that can recover over 85% of the wasted heat. The unit is reliably manufactured to ensure high thermal efficiencies with optional ancillaries such as electric heaters, F7 (ISO ePM1 55%) supply air filter and various sensors. The DV65 has low energy EC fans that minimise the unit's energy consumption therefore can help reducing energy bills. The unit has an easy to maintain plastic counterflow heat exchanger that prevents the airstreams from mixing and easy to clean air filters that provide you with a clean, healthy indoor air environment. Please note – this unit is available to purchase on its own, with a basic controller or with a digital controller. Unit Components The DV65 Entro-V includes an easily removable, plastic heat exchanger which transfers warmth from the outgoing waste airstream into the incoming fresh air with thermal efficiency over 85%. At no point do the airstreams mix. The DV65 Entro-V unit is designed with a double filter facility that comes with 2 x G4 (ISO ePM Coarse 55%) filters as standard. There is the option to have a F7 (ISO ePM1 %%5) pollen filter included, which provides additional protection against invisible, harmful particles and creates an ultra-hygienic environment, particularly relevant for those suffering from asthma or other respiratory conditions. Adaptable Design The DV65 Entro-V unit can be installed in vertical mounting positions, on the wall or floor. Hanging brackets, screws and feet are supplied with the unit. Also, the unit has interchangeability of spigot positions from top or sides. Accessories In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation.

GBP 1733.27
1

Airflow DV82 Entro MVHR Unit

Airflow DV82 Entro MVHR Unit

Airflow DV82 Entro MVHR Unit Product Part Number DV82 Entro-V - 90001244 DV82 Entro-V With Basic Controller - 90001310 DV82 Entro-V with Digital Controller - 90001313 Description The DV82 Entro-V is a highly efficient, top entry MVHR unit that can recover over 85% of the wasted heat. The unit is reliably manufactured to ensure high thermal efficiencies with optional ancillaries such as electric heaters, F7 (ISO ePM1 55%) supply air filter and various sensors. The DV82 has low energy EC fans that minimise the unit's energy consumption therefore can help reducing energy bills. The unit has an easy to maintain plastic counterflow heat exchanger that prevents the airstreams from mixing and easy to clean air filters that provide you with a clean, healthy indoor air environment. Please note – this unit is available to purchase on its own, with a basic controller or with a digital controller Components The DV82 Entro-V includes an easily removable, plastic heat exchanger which transfers warmth from the outgoing waste airstream into the incoming fresh air with thermal efficiency over 85%. At no point do the airstreams mix. The DV82 Entro-V unit is designed with a double filter facility that comes with 2 x G4 (ISO ePM Coarse 55%) filters as standard. There is the option to have a F7 (ISO ePM1 %%5) pollen filter included, which provides additional protection against invisible, harmful particles and creates an ultra-hygienic environment, particularly relevant for those suffering from asthma or other respiratory conditions. Adaptable Design The DV82 Entro-V unit can be installed in vertical mounting positions, on the wall or floor. Hanging brackets, screws and feet are supplied with the unit. Also, the unit has interchangeability of spigot positions from top or sides. Accessories In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation.

GBP 1929.18
1

Airflow DV130 Entro MVHR Unit

Airflow DV130 Entro MVHR Unit

Airflow DV130 Entro MVHR Unit Product Part Number DV130 Entro-V Unit - 90001245 DV130 Entro-V Unit with Basic Controller - 90001311 DV130 Entro-V Unit with Digital Controller - 90001314 Description The DV130 Entro-V is a highly efficient, top entry MVHR unit that can recover over 85% of the wasted heat. The unit is reliably manufactured to ensure high thermal efficiencies with optional ancillaries such as electric heaters, F7 (ISO ePM1 55%) supply air filter and various sensors. The DV130 has low energy EC fans that minimise the unit's energy consumption therefore can help reducing energy bills. The unit has an easy to maintain plastic counterflow heat exchanger that prevents the airstreams from mixing and easy to clean air filters that provide you with a clean, healthy indoor air environment. Please note – this unit is available to purchase on its own, with a basic controller or with a digital controller. Components The DV130 Entro-V includes an easily removable, plastic heat exchanger which transfers warmth from the outgoing waste airstream into the incoming fresh air with thermal efficiency over 85%. At no point do the airstreams mix. The DV130 Entro-V unit is designed with a double filter facility that comes with 2 x G4 (ISO ePM Coarse 55%) filters as standard. There is the option to have a F7 (ISO ePM1 %%5) pollen filter included, which provides additional protection against invisible, harmful particles and creates an ultra-hygienic environment, particularly relevant for those suffering from asthma or other respiratory conditions. Adaptable Design The DV130 Entro-V unit can be installed in vertical mounting positions, on the wall or floor. Hanging brackets, screws and feet are supplied with the unit. Also, the unit has interchangeability of spigot positions from top or sides. Accessories In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation.

GBP 2177.83
1

BSK NOTUS Multi Orientation Unit with Humidity Sensor

BSK NOTUS Multi Orientation Unit with Humidity Sensor

Description BSK NOTUS/HV/350 The BSK Notus 350 heat recovery unit is a quality MVHR unit manufactured of the latest EPP construction and can installed either vertically or horizontally allowing for almost all site restrictions suitable for new houses up to 225m2 that has advanced Wi-Fi controllability and internal humidity sensor   This unit has a (A) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems, Key features- BSK Notus 350 Interactive Wi-Fi Smart Control App Internal humidity sensor Optional touch screen controller Horizontal or Vertical Orientation Electronic orientation change Multiple spigot connections Ultra-Light @ only 18Kg Suitable for home sizes up to 225m2 Airflow rate @100Pa – 375 m3/h EPP Super Quiet construction Highly efficient EC fans 100% summer bypass Fully adjustable fan speeds G4 filtration ‘A’ energy rating High heat recovery efficiency of up to 90%. Optional duct heaters Optional Fire alarm connection Controllability The BSK Notus has advanced controls that allow the user to easily adjust settings Wi-Fi Mobile App The BSK Mobile App is available on iOS and Google Store with the following features Monitor outdoor and indoor temperature and humidity Change fan speeds Control optional heaters Schedule weekly and daily programs Adjust all settings Wall Touch screen controller (optional) 4inch touchscreen Full control of fan speeds Temperature and humidity readings Automatic air quality control with optional AQ sensor. Extensive weekly schedule. Automatic Boost modes External Control The BSK Notus have external connections allowing for hassle free setup Ability to control via a web browser for remote monitoring and repair Integration into a smart home management system. (BMS) via Modbus port Expansion port for bespoke solutions Optional wall controller 0-volt dry boost connection Optional Pre and Post heater connection BMS Control Implemented Modbus protocols enable simple connection into Building Management System as a result whole buildings engineering systems can be controlled at a single access point. Connection and monitoring of multiple units by building managers can be enabled through the BSK Cloud Control Application Construction The BSK Notus is constructed of the latest EPP with a metal front cover EPP (expanded polypropylene) with its lightweight, impact absorbing, and insulating properties make it a perfect body material for MVHR units Motors The fan motors are the latest backward curved low energy EC fans of (A) energy rating Filtration 2 x G4 filters are fitted to the unit that are easy to replace Optional F7 to air supply Summer By-Pass The BSK range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Low Noise Levels With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet Heat Exchanger Highly efficient PVC counterflow heat exchanger with up to 90% heat recovery Frost Protection Intelligent frost protection is standard on the BSK Notus units Orientation The BSK Notus has multiple configurations and can be electronically changed from Left- and Right-hand orientation Vertical or Horizontal Mounting Left-hand and Right-hand electronic changeover Top and Bottom spigot access Multiple Drain points Mounting The units are supplied with both wall and floor mounting brackets Accessories QV-BoostSw                                       1Gang Momentary Boost Switch NOTUS/W/BLACK/CONTROLLER BSK

GBP 1053.02
1