mcb.dk | Få success online

C-Tec ActiV Class A2 Standard 60C Fixed Temperature Heat Detector - C4403A2

C-Tec ActiV Class A2 Standard 60C Fixed Temperature Heat Detector - C4403A2The C4403A2 Class A2 fixed temperature heat detector generates an alarm condition if the temperature within the protected area reaches a temperature of between 54C and 65C. Heat detectors are typically used in environments where smoke detectors cannot be installed for example in areas susceptible to fumes airborne materials and smoke such as in kitchens loading bays workshops wood mills and nightclubs.Other detectors from the ActiV range include C4403A1R which is a Rate of Rise Heat Detector C4403B which is a 75C Fixed Heat Detector C4414 which is a Heat Smoke Multi-Sensor and the C4416 which is a Optical Smoke Detector.Key FeaturesA high-quality Class A2 fixed temperature heat detector offering outstanding detection performance at a very competitive priceManufactured by C-TEC in the UKThird-party certified to EN54-5 by IntertekCarries the pan-European CertAlarm markWide 6-33V DC operating voltageTwo 8mm x 2mm ultra-bright red LED indicating strips offering 360 visibilitySophisticated onboard detection algorithms help reduce false alarms by rejecting momentary abnormal readingsCompatible with our ActiV C4408D diode C4408 non-diode and C4408R relay bases all bases include an integrated detectorbase locking mechanism and ID tagClass B fixed heat class A1R rate-of-rise optical and multi-sensor variants also availableExcellent discounts for quantity orders

GBP 13.15

1

Gent VSRPT-MRC-72 Replacement MRC for New Repeat A3 amp A2 Mimic BS amp EN

Gent VSRPT-MRC-72 Replacement MRC for New Repeat A3 A2 Mimic BS ENThe replacement Master Repeat Card MRC Mark-4 VSRPT-MRC-72 or CP4S-RPT-MRC-XXX is designed for installation into a new Repeat panel or A3 Mimic panel that are wired on to a loop of an EN54 or BS5839 analogue and addressable fire detection and alarm systems.Key FeaturesReplacement MRC

GBP 620.83

1

Gent S4M-S S4M Sounder Only

Gent S4M-S S4M Sounder OnlyAnAddressable S4M sounder designed for ceiling mounting.Key FeaturesColour RedS4M SounderLow powerClass CCertificationsCE UKCA LPCB Approved EN54-17 2005 EN54-3 2001 A1 2002 A2 2006 EN54-3 2014 A1 2019

GBP 84.08

1

Gent S4M-VAD-LPR S4M Low Power C Class VAD - Red

Gent S4M-VAD-LPR S4M Low Power C Class VAD - RedAnAddressable S4M VAD designed for ceiling mounting.Key FeaturesColour RedS4M VADCertificationsCE UKCA LPCB Approved EN54-17 2005 EN54-3 2001 A1 2002 A2 2006 EN54-3 2014 A1 2019

GBP 84.08

1

Gent S4M-V-VAD-LPR S4M Voice Sounder Low Power C Class VAD - Red

Gent S4M-V-VAD-LPR S4M Voice Sounder Low Power C Class VAD - RedAnAddressable S4M voice sounder designed for ceiling mounting.Key FeaturesColour RedS4M SounderLow powerClass CCertificationsCE UKCA LPCB Approved EN54-17 2005 EN54-3 2001 A1 2002 A2 2006 EN54-3 2014 A1 2019

GBP 106.16

1

C-Tec CP402 CAST-PRO Heat Detector

C-Tec CP402 CAST-PRO Heat DetectorA programmable CAST-PRO heat detector certified to EN54-5 17. This detector is compatible with C-TECs ZFP touchscreen-controlledCAST protocol addressable fire panel.Key FeaturesOnboard short circuit loop isolatorIncludes two 8mm x 2mm ultra-bright red LED indicatingstripsThree operation modes can be programmed to operate as anA1R A2 or B heat detector1mA alarm current570A typical quiescent current 40V DCCompatible with C-TECs CA408 CAST base cw integratedlocking mechanism ID tag

GBP 38.80

1

Elmdene EN3-JB26 Junction Box - 24 Terminals Plus Micro Switch Tamper White Pack of 10

Elmdene EN3-JB26 Junction Box - 24 Terminals Plus Micro Switch Tamper White Pack of 10The EN range of Junction Boxes feature a high reliability spring action micro switch for the lid tamper so now your engineers can confidently connect the tamper when using a junction box maintaining the security and integrity of the system and indeed the reputation of your company. The Junction Boxes are designed to meet PD66622004 A1 A2 BS EN 50131-12006 and the environmental testing requirements of EN 50131-2- 22008 Class II or III as indicated.Key FeaturesDimensions 125L x 100w x 45dColour White

GBP 60.14

1

Elmdene EN3-JB9-HD Junction Box - Heavy Duty - White Pack of 10

Elmdene EN3-JB9-HD Junction Box - Heavy Duty - WhitePack of 10It is ideal for Roller Shutter Contacts Door Loops etc 7 terminals plus micro-switch tamper.The EN range of Junction Boxes feature a high reliability spring action micro switch for the lid tamper so now your engineers can confidently connect the tamper when using a junction box maintaining the security and integrity of the system and indeed the reputation of your company. The Junction Boxes are designed to meet PD66622004 A1 A2 BS EN 50131-12006 and the environmental testing requirements of EN 50131-2- 22008 Class II or III as indicated.Key FeaturesDimensions 94L x 40w x 25dColour WhiteShrouded spring action microswitch tamperClamp style terminals except EN3-JB9-HDAccommodates various wiring systemscabletrunkingconduitAvailable in white or brown except EN3-JB26EN3-JB9-HD is a heavy-duty water resistant unit ideal for roller shutter contacts and door loops5 year warranty

GBP 51.41

1

Elmdene ELM-PA-G3-W PA Button - Double Push - Grade 3 Pack of 10

Elmdene ELM-PA-G3-W PA Button - Double Push - Grade 3 Pack of 10All units are Grade 3 Double Push with integral resistors for use with most control panels or option for Double Pole. Spare terminals allow through connection for multiple units wired to one zone.Special features include integral storage of reset key and anti-lock reset mechanism to ensure unit still operates if reset key is left in the unit and silent operation.Elmdene Panic Buttons fully comply with The ACPO 10 Point Plan and all requirements under EN50131-12006 A12009 and PD66622010 A1 A2.Compatible Control Panels Resistor Options4k72k2 ADE Bosch Castle Menvier Pyronix Scantronic Texecom1k1k Galaxy8k28k2 Guardall4k74k7 Aritech6k84k7 GardTec2k22k2 Europlex5k65k6 DSCDouble Pole no resistorsKey FeaturesIntegral resistors to suit all popular control panelsEasy connection of single or multiple unitsSilent operationAnti-lock reset mechanism to ensure unit still operates if reset key left inIndependent cover tamperIntegral storage for reset keySelectable normally closed or open contactsWhite finish

GBP 125.83

1

Elmdene STX2401-C 24Vdc 1.2A 0.3A Switch Mode PSU EN54 Approved 2 x 7Ah Batteries

Elmdene STX2401-C 24Vdc 1.2A 0.3A Switch Mode PSU EN54 Approved 2 x 7Ah BatteriesThe STX2401 is an EN54-41997 A1 A2 approved power supply ideal for use in Fire Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 1.2 Amps continuous current into the load in addition to providing up to 300mA for charging the standby batteries up to 7Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation.Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition.Once fully charged the product operates in Eco power saving mode whereby the batteries are charged for 4 hours in every 24 hour period while still being continuously monitored. This reduces wasted energy in charging already fully charged batteries and extends their working life. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 A2.Up to 1.2A current to load at 27.6V dc nominal regulated output.Charging capability to support 1.2 to 7Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection or circuitimpedance Ri in excess of 500mW caused by connector or wiring problemcorrosion within 4 hours.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 7AhC Box Power Supply - 275h x 330w x 80d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 136.90

1

Elmdene 24Vdc 1.2A 0.3A Switch Mode PSU EN54 Approved 2 x 1.2Ah Batteries

Elmdene 24Vdc 1.2A 0.3A Switch Mode PSU EN54 Approved 2 x 1.2Ah BatteriesThe STX2401 is an EN54-41997 A1 A2 approved power supply ideal for use in Fire Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 1.2 Amps continuous current into the load in addition to providing up to 300mA for charging the standby batteries up to 7Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation.Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition.Once fully charged the product operates in Eco power saving mode whereby the batteries are charged for 4 hours in every 24 hour period while still being continuously monitored. This reduces wasted energy in charging already fully charged batteries and extends their working life. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 A2.Up to 1.2A current to load at 27.6V dc nominal regulated output.Charging capability to support 1.2 to 7Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection or circuitimpedance Ri in excess of 500mW caused by connector or wiring problemcorrosion within 4 hours.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 1.2AhT Box Power Supply - 300h x 240w x 63d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 115.54

1

C-Tec CA402 CA Programmable Heat Detector

C-Tec CA402 CA Programmable Heat DetectorThe CA402 is a high quality programmable heat detector foruse with C-Tecs XFP ZFP CAST protocol addressable fire panels.CAST is the worlds most-advanced distributed intelligencefire alarm system protocol. Conceived designed and realised by C-TEC as partof a five-year multi-million pound project it involved the creation of apowerful proprietary communication protocol C-TEC Addressable SystemTechnology CAST and multiple control panels field devices.Key FeaturesA high-quality programmable heat detector for use withC-TECs XFP ZFP CAST protocol Addressable Fire PanelsLPCB certified to EN54-5 17 and Kiwa Teleficationcertified to EN54-13Can be programmed to operate as a Class A1R rate of riseClass A2 64C fixed temperature or Class B 76C fixed temperature heatdetector. Default setting is A2Onboard short circuit loop isolatorIncludes two 8mm x 2mm ultra-bright red LED indicatingstripsDifferent sensitivities can be selected for different timesof the day daynight building occupiedunoccupied etc5mA typical alarm current 370uA typical quiescent 22-40VDCProgrammable multi-function status LEDCompatible with C-TECs CA408 CAST base cw integratedlocking mechanism ID tag

GBP 30.17

1

Ziton ZP732-2P Combination Sensor Optical amp Heat - Polar White

Ziton ZP732-2P Combination Sensor Optical Heat - Polar WhiteDesigned to provide the earliest response to a wide range of fire types the ZP732-2P POLAR WHITE dual sensor combines optical smoke sensing and thermal monitoring to provide an accurate warning of fire. Individual software monitoring of each element measures actual smoke levels in addition to temperature rates of rise. Smoke sensing can be isolated for areas where ambient smoke may exist at certain times of the day or used on a day night basis in premises where heat only is required whilst the building is occupied. Temperature response meets the requirements of EN54 Part 5 Class A1 and A2 with smoke sensitivity complying with EN54 Part 7 and test procedure CEA4021. Several international approval bodies approved this detector.Key FeaturesSenses both smoke and heatHeat only facilitySmoke element complies with EN54 Part 7 and CEA4021Heat element complies with EN54 Part 5 Class A1 and A2Analogue sensing - reduces false and unwanted alarmsAddressable - system knows the status and location of every detector

GBP 42.73

1

Patol Analogue LDM-519-SEN-N LHD Fire Zone Monitor with Two Level Set Alarm Points

Patol Analogue LDM-519-SEN-N LHD Fire Zone Monitor with Two Level Set Alarm PointsThe SEN-N Controller is designed to monitor a zonal length of resettable Analogue Linear Heat detection Cable LHDC for both an elevated temperature Fire condition and Fault Status Open Short Circuit. The Controller offers two adjustable levels of alarm A1 A2 one of which may be optionally employed as a Pre Alarm. The LHDC is also monitored for fault conditions open and short circuit.LHDC is of coaxial construction and is used in conjunction with an End of Line EOL terminator. The Controller provides early warning of hot spots and fire conditions on short sections of the overall LHDC zone length. Maximum LHDC zone length for Analogue cable is 500M. The modular form of the unit enables it to be provided in a variety of bespoke housings and readily integrated into special control panels.Key FeaturesTwo level alarm set pointsAdjustable alarm set pointLED indication of Fire Fire and Supply statusWire dc supply operation -20vdc to -60vdc positive earthedFault monitoring for open short circuitsSelectable Latching Auto reset operationVFC relay outputs fore Fire Fault conditions

GBP 828.24

1

Apollo Marine Orbis BS Heat Detector - ORB-HT-41004-MAR

Apollo Marine Orbis BS Heat Detector - ORB-HT-41004-MARThe Orbis Marine Heat Detector uses a single thermistor to sense the air temperature around the detector. There are twelve heat detectors in the Orbis Marine range designed to suit a wide variety of operating conditions.OperationThe Orbis range incorporates seven heat detector classes to suit a wide variety of operating conditions in which smoke detectors are unsuitable. The European standard EN54-52001 classifies heat detectors according to the highest ambient temperature in which they can safely be used without risk of false alarm.The classes are identified by the letters A to G. Class A is subdivided into A1 and A2. In addition to the basic classification detectors may be identified by a suffix to show that they are rate-of-rise suffix R or fixed temperature suffix S types. All heat detectors in the Orbis range are tested as static or rate-of-rise detectors and are classified as A1R A1S A2S BR BS CR and CS.Key FeaturesCan be used for applications where smoke detectors are unsuitableIdeal for environments that are dirty or smoky under normal conditions

GBP 20.99

1

C-Tec C4403A1R ActiV Class A1R Rate of Rise Heat Detector

C-Tec ActiV Class A1R Rate of Rise Heat Detector - C4403A1RThe C4403A1R class A1R rate-of-rise heat detector generates an alarm condition when it detects a sudden rise in temperature or if it detects a static temperature of between 54C and 65C. Heat detectors are typically used in environments where smoke detectors cannot be installed for example in areas susceptible to fumes airborne materials and smoke such as in kitchens loading bays workshops wood mills and nightclubs.Other detectors from the ActiV range include C4403A2 which is a 60C Fixed Heat Detector C4403B which is a 75C Fixed Heat Detector C4414 which is a Heat Smoke Multi-Sensor and the C4416 which is a Optical Smoke Detector.Key FeaturesA high-quality rate-of-rise heat detector offering outstanding detection performance at a very competitive priceManufactured by C-TEC in the UKThird-party certified to EN54-5 by IntertekCarries the pan-European CertAlarm markWide 6-33V DC operating voltageTwo 8mm x 2mm ultra-bright red LED indicating strips offering 360 visibilitySophisticated onboard detection algorithms help reduce false alarms by rejecting momentary abnormal readingsCompatible with our ActiV C4408D diode C4408 non-diode and C4408R relay bases all bases include an integrated detectorbase locking mechanism and ID tagClass A2 fixed heat class B fixed heat optical and multi-sensor variants also availableExcellent discounts for quantity orders

GBP 13.15

1

Carrier ABT-PSM48E Power Supply Manager Loop Board

Carrier ABT-PSM48E Power Supply Manager Loop BoardABT-PSM48E Power Supply Manager is designed for distribution of DC Power Supply from Power Supply Units PSU and a back-up battery. The unit controls battery charging and distributes power supply to all Voice Evacuation System VES equipment at max 60 A. When the system uses battery back-up the power supplied is 3.2 kW 48 V.The unit complies with the EN 54-4 VES standards and also EN 12101-10 Smoke and Heat Control System standards.As a main source of energy distribution the manager uses external modules 800 W ABT-PS48800 for 48 V. PSM48 power supply manager uses internal power converter for 24 V equipment.As a source of stand-by power supply it uses the battery bank of the capacity of up to 200 Ah.ABT-PSM48E cooperates with the 4x12V VRLA battery bank. It maintains the bank in charged condition ensures temperature compensation of charging parameters and monitors serial resistance of the battery and its wiring as specified in Exhibit No. A2 to the EN 54-4 Standard.ABT-PSM48E co-operates with up to 4 modules of ABT-PS4880 Power Supply Units. The manager ensures safe connection for the purpose of parallel operations and monitors the output parameters of each power supply unit.ABT-PS48800 is designed for assembling in a dedicated ABT-PF4 Power Supply Unit Frame. The elements of the system are designed for assembling in a Rack 19 IP30-type.

GBP 1715.33

1

Kidde Airsense EST-PSM48 Power Supply Manager

Kidde Airsense EST-PSM48 Power Supply ManagerEST-PSM48 Power Supply Manager is designed for distribution of DC Power Supply from Power Supply Units PSU and a back-up battery.The unit controls battery charging and distributes power supply to all Voice Evacuation System VES equipment at max 60 A. When the system uses battery back-up the power supplied is 3.2 kW 48 V.The unit complies with the EN 54-4 VES standards and also EN 12101-10 Smoke and Heat Control System standards.As a main source of energy distribution the manager uses external modules 800 W EST-PS48800 for 48 V.As a source of stand-by power supply it uses the battery bank of the capacity of up to 200 Ah.EST-PSM48 cooperates with the 4 x 12 V VRLA battery bank. It maintains the bank in charged condition ensures temperature compensation of charging parameters and monitors serial resistance of the battery and its wiring as specified in Exhibit No. A2 to the EN54-4 Standard.EST-PSM48 co-operates with up to 4 modules of EST-PS4880 Power Supply Units. The manager ensures safe connection for the purpose of parallel operations and monitors the output parameters of each power supply unit.EST-PS48800 is designed for assembling in a dedicated EST-PF4 Power Supply Unit Frame. The elements of the system are designed for assembling in a Rack 19 IP30-type.Key FeaturesAC power supply 230 VAC 10 -15 5060 HzPower consumption 885 W max. 3.85 A

GBP 1713.02

1

Patol Analogue LDM-519-ACT-N Fire Zone Monitor with Actuation Output

Patol Analogue LDM-519-ACT-N Fire Zone Monitor with Actuation OutputThe ACT-N controller is designed to monitor a zonal length of Analogue Linear Heat Detection Cable LHDC for elevated temperature states. Two adjustable levels of alarm are provided A1 A2 one of which may be optionally employed as a Pre-Alarm. The LHDC is also monitored for fault conditions open short circuit. The Controller is provided with an output for the initiation of extinguishing media. This Actuation Output is primarily intended for the use with electrically operated chemical protractors Metrons.The ACT-N has fault monitoring circuitry appropriate to the series firing of these devices using an All Fire actuation loop configuration. LHDC is of coaxial construction and is used in conjunction with an end of line EOL terminator. The Controller provides early warning of hot spots and fire conditions on short sections of the overall LHDC zone length. Maximum LHDC zone length for Analogue cable is 500M. The modular form of the unit enables it to be provided in a variety of bespoke housings and readily integrated into special control panels.Key FeaturesTwo level alarm set pointsAdjustable alarm set point actuation loop monitoringExtinguishant actuation outputLED indication of Fire Fault and Supply statusSeparate LHDC Monitoring Actuation supplies electrically isolatedWide dc supply operation positive earthedMonitoring -20Vdc to -60VdcActuation -20Vdc to 130VdcFault monitoring for open and short circuitsSelectable latchingauto reset operationVFC relay outputs for fire and fault conditions

GBP 1056.72

1

Kidde Airsense EST-PS48800 Power Supply

Kidde Airsense EST-PS48800 Power SupplyEST-PSM48 Power Supply Manager is designed for distribution of DC Power Supply from Power Supply Units PSU and a back-up battery. The unit controls battery charging and distributes power supply to all Voice Evacuation System VES equipment at max 60 A. When the system uses battery back-up the power supplied is 3.2 kW 48 V.The unit complies with the EN 54-4 VES standards and also EN 12101-10 Smoke and Heat Control System standards. As a main source of energy distribution the manager uses external modules 800 W EST-PS48800 for 48 V.As a source of stand-by power supply it uses the battery bank of the capacity of up to 200 Ah.EST-PSM48 cooperates with the 4 x 12 V VRLA battery bank. It maintains the bank in charged condition ensures temperature compensation of charging parameters and monitors serial resistance of the battery and its wiring as specified in Exhibit No. A2 to the EN54-4 Standard.EST-PSM48 co-operates with up to 4 modules of EST-PS4880 Power Supply Units. The manager ensures safe connection for the purpose of parallel operations and monitors the output parameters of each power supply unit.EST-PS48800 is designed for assembling in a dedicated EST-PF4 Power Supply Unit Frame. The elements of the system are designed for assembling in a Rack 19 IP30-type.Key FeaturesPower consumption 885 W max. 3.85 AAC power supply 230 VAC 10 -15 5060Hz 3.85 A Wire with IEC 60320 C13 3x075 mm2 coupling supplied with the unitCertification EN54-4Standards EN12101-10

GBP 697.18

1

Ziton ES Weatherproof Heat Detector IP67 117C

Ziton ES Weatherproof Heat Detector IP67 117CHeat detectors are normally used in rooms where the temperature can be expected to rise rapidly in case of a fire or in places where smoke detectors cannot be used. The 6000 series heat detectors are intended for outdoor or indoor use in high humidity areas.Fixed Temperature Alarm LevelThe 6000 series detectors are conventional fixed temperature heat detectors i.e. they will give an alarm within a response temperature range in accordance with EN54-52000. The sensing element is a heat pick-up shield and a bimetal switch. An LED on the detector not available on the 6298 will light up when the detector activates. All detectors support an output for a remote indicator.The following types are available static response temperature class EN54-5 temperature range.6295 57C class A2 S 54 to 70C6296 72C class B S 69 to 85C6297 87C class C S 84 to 100C6298 117C class E S 114 to 130COperationAll detectors are latching i.e. they will not be automatically reset if the temperature after the alarm falls below the detectors static response temperature. The detectors LED and a connected remote LED will be lit until the detector is reset via the C.I.E.InstallationAll electronic componets are mounted in a grey waterproof detector housing and fitted to the supplied connection box. The connection box has three cable inlets. Three compression glands and a silicon gasket for IP67 protection are supplied with the product.All detectors are provided with three pairs of flying leads with female push-on connectors to connect the zone line cables in out and the remote indicator.Key FeaturesFixed temperature alarm levelWaterproof IP67

GBP 234.43

1

Elmdene 24Vdc 2A 0.3A Switch Mode PSU EN54 Approved 2 x 7Ah Batteries

Elmdene 24Vdc 2A 0.3A Switch Mode PSU EN54 Approved 2 x 7Ah BatteriesThe STX2402 is an EN54-4 approved power supply ideal for use in Fire and Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 2.0 Amps continuous into the load in addition to providing up to 700 mA for charging the standby batteries up to 17 Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation.Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition. Once fully charged the product operates in Eco power saving mode whereby it will check and top up battery charge every 24 hours but will not waste energy by continuously attempting to charge a fully charged battery. This also extends the operating life of the batteries. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 2002 A2 2006.Up to 2.0A current to load at 27.6V dc nominal regulated output.Charging capability to support 7 or 17Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 7AhC Box Power Supply - 275h x 330w x 80d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 147.38

1

Elmdene 24Vdc 5A 0.8A Switch Mode PSU EN54 Approved 2 x 17Ah Batteries

Elmdene 24Vdc 5A 0.8A Switch Mode PSU EN54 Approved 2 x 17Ah BatteriesThe STX2405 is an EN54-4 approved power supply ideal for use in Fire and Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 5 Amps continuous into the load in addition to providing up to 850mA for charging the standby batteries up to 17Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation. Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition.Once fully charged the product operates in Eco power saving mode whereby it will check and top up battery charge every 24 hours but will not waste energy by continuously attempting to charge a fully charged battery. This also extends the operating life of the batteries. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 2002 A2 2006.Up to 5A current to load at 27.6V dc nominal regulated output.Charging capability to support 7 or 17Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 17AhE Box Power Supply 420h x 400w x 80d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 188.21

1

Elmdene 24Vdc 5A 0.8A Switch Mode PSU EN54 Approved 2x 7Ah Batteries

Elmdene 24Vdc 5A 0.8A Switch Mode PSU EN54 Approved 2x 7Ah Batteries -STX2405-CThe STX2405 is an EN54-4 approved power supply ideal for use in Fire and Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 5 Amps continuous into the load in addition to providing up to 850mA for charging the standby batteries up to 17Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation. Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition.Once fully charged the product operates in Eco power saving mode whereby it will check and top up battery charge every 24 hours but will not waste energy by continuously attempting to charge a fully charged battery. This also extends the operating life of the batteries. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 2002 A2 2006.Up to 5A current to load at 27.6V dc nominal regulated output.Charging capability to support 7 or 17Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 7AhC Box Power Supply - 275h x 330w x 80d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 167.24

1

Elmdene 24Vdc 1.8A 0.7A Switch Mode PSU EN54 Approved 2 x 17Ah Batteries

Elmdene 24Vdc 1.8A 0.7A Switch Mode PSU EN54 Approved 2 x 17Ah BatteriesThe STX2402 is an EN54-4 approved power supply ideal for use in Fire and Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 2.0 Amps continuous into the load in addition to providing up to 700 mA for charging the standby batteries up to 17 Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation.Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition. Once fully charged the product operates in Eco power saving mode whereby it will check and top up battery charge every 24 hours but will not waste energy by continuously attempting to charge a fully charged battery. This also extends the operating life of the batteries. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 2002 A2 2006.Up to 2.0A current to load at 27.6V dc nominal regulated output.Charging capability to support 7 or 17Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 17AhE Box Power Supply - 420h x 400w x 80d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 164.36

1

DIGITAL MARKETING

Brand

Merchant

Price (EUR)