334 results (0,20847 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Electro Detectors Zerio Plus Radio Booster Unit EDA-Z6000

Electro Detectors Zerio Plus Radio Booster Unit EDA-Z6000

Electro Detectors Zerio Plus Radio Booster Unit EDA-Z6000The EDA-Z6000 is a Zerio Plus radio booster unit which requires a 240v supply. The unit is designed to relay radio signals from the main control panel around the site to the different devices and other booster panels. The radio booster unit will operate on a 868Mhz frequency.Key FeaturesRequires 240v mains supply868 Mhz operating frequencyStandby battery backup requires 1 x 7Ah 12v SLA Battery

GBP 425.41
1

Electro Detectors Radio Sounder EDA-A6000

Electro Detectors Radio Sounder EDA-A6000

Electro Detectors Radio Sounder EDA-A6000Designed to complement the range of EDA Radio Fire Alarm equipment the EDA-A6000 electronic sounder is powered entirely by internal batteries controlled and monitored by radio producing up to fourteen different sound tones at a sound level equivalent to that of a normal hard wired electronic sounder. In normal operation the sounder continuously listens via its built in radio receiver to any instruction emanating from its controlling panel. Once operating it continues to listen for further instructions to change tone or silence.To ensure that the integrity of the communication link is maintained frequent transmissions are made by the sounder to the control panel so that in the unlikely event of the radio signal failing to reach the panel a fault is reported. Other coded transmissions are made to signal faults including unit removal battery low receiver failure and where external devices are connected to it a fault in that wiring. The unit is fully addressable and can be assigned to a particular area allowing phased evacuation to be incorporated into the system.Key FeaturesEN54 Part 25Fully Addressable105dB at 1M adjustableSelectable tones from panelUp to 5 year battery lifeSmall attractive compact designCompatible with Zerio Plus PanelsAvailable with LED BeaconCall point input option

GBP 181.12
1

Electro-Detectors EDA-A6072 Radio Sounder Beacon IP65

Electro-Detectors EDA-A6072 Radio Sounder Beacon IP65

Electro-Detectors EDA-A6072 Radio Sounder Beacon IP65Designed to complement the range of EDA Radio Fire Alarm equipment the EDA-A6072 weatherproof electronic sounder with beacon is powered entirely by internal batteries controlled and monitored by radio producing up to fourteen different sound tones at a sound level equivalent to that of a normal hard wired electronic sounder.In normal operation the sounder continuously listens via its built in radio receiver to any instruction emanating from its controlling panel. Once operating it continues to listen for further instructions to change tone or silence.This product requires 3 x EDA-Q690 Batteries to operate.Key FeaturesThis product is fully addressableSelectable tonesHas a battery life of up to 5 yearssmall aesthetic compact designCall point input option available105dB at 1M can be adjusted as required

GBP 452.64
1

SAS RED2096RF Radio Curo Reset Unit

SAS RED2096RF Radio Curo Reset Unit

SAS RED2096RF Radio Curo Reset UnitThe RED2096RF is a Radio Curo Reset Unit.This transmitter is used to cancel the alarm calls at their origin. This important feature means that all calls must be dealt with by visiting the source of the activation. The person carrying this transmitter always has the option of pulling it away from its clothing clip and activating an urgent alarm call. The same function and battery tests are in-built as the alarm transmitter above for peace of mind.

GBP 153.90
1

C-Tec AMRHA Handheld Radio Microphone Kit

C-Tec AMRHA Handheld Radio Microphone Kit

C-Tec AMRHA Handheld Radio Microphone KitA microphone is perhaps the most important link in an audio chain. As the connection between the sound source and the sound system it must interact efficiently with both. Choosing this link successfully requires knowledge of the sound source the sound system including the room acoustics microphones and the actual application. The AMRHA is a handheld radio microphone which comes with a receiver transmitter PSU for PDA200E or APQM outreach plate.

GBP 589.02
1

Electro Detectors Radio LED Beacon EDA-A6060

Electro Detectors Radio LED Beacon EDA-A6060

Electro Detectors Radio LED Beacon EDA-A6060The EDA-A6060 Zerio Plus Wireless Beaconis a White Wall Mounted Fire AlarmBeacon designed specifically to be used with the Zerio Plus range of wireless fire alarm panels. To ensure that the integrity of the communication link is maintained frequent transmissions are made by the EDA-A6060 Zerio Plus WirelessBeacon to the control panel so that in the unlikely event of the radio signal failing to reach the panel a fault is reported.

GBP 216.66
1

EMS Firecell Fusion FCX-532-001 Radio Loop Module

EMS Firecell Fusion FCX-532-001 Radio Loop Module

EMS Firecell Fusion FCX-532-001 Radio Loop ModuleThe award winning Fusion Radio Loop Module RLM connects to the FireCell Control Panels XP95 loop and can accommodate up to 31 wireless FireCell devices. Requiring just 17mA up to five Fusion RLMs can be added per loop subject to cable specification. This device is third party EN certified combining diversity aerial methodology and 32 channel selection to produce fast and reliable wireless communication.Key FeaturesInternal diversity aerialsDual band 868MHz operation32 radio channel selection31 wireless FireCell devices per RLMUp to five RLMs per loop subject to cable specificationXP95 loop poweredThird party EN certified

GBP 226.38
1

CST GEN2-RADREP Radio Message Module Per Radio Repeater

CST GEN2-RADREP Radio Message Module Per Radio Repeater

CST GEN2-RADREP Radio Message Module Per Radio RepeaterThe GEN2-RADREP is a Radio Message Module for the GEN2 software.Only the most efficient hotels run on Gen2 a software solution that controls and monitors an entire messaging and alarm monitoring operation. Gen2 is high performing multi-lingual user-friendly and Windows-based with the ability to facilitate an unlimited amount of client users. It is the hub of all communication sending and receiving messages or alerts from all departments equipment and staff members.Pre-set or formulate messages using the QWERTY keyboardand communicate critical events and data to any end point. Gen2 can send recurring messages and prompts such as maintenance reminders as well as one-time instant messages.Gen2 can route alerts to individuals or entire groups via different connections. As events escalate so can your recipient list. Whether its a status update or a life-safety alert you can be confident the right people will receive the information.Hot KeysUnlimited programmable hot keys for pre-defined and pre-set messages enabling swift alerts to pagers radios DECT phones email addresses and mobile users.Quick KeysImportant messages or alerts can be pre-set here easy to see and making communication to defined groups quick and simple.Multi-LingualGen2 supports English German French Spanish Dutch and standard Arabic.Quick SendUse the Qwerty keyboard to write and send all messages to any end user.Incoming MessagesView all incoming messages including time date and message in one single place.UsersGroupsContactsA list of all users contactable via Gen2 are listed here.Cloud StorageUsers can log in to Gen2 via Android and iOS operating devices.

GBP 1047.73
1

C-Tec AMRLA Lavalier Radio Microphone Kit

C-Tec AMRLA Lavalier Radio Microphone Kit

C-Tec AMRLA Lavalier Radio Microphone KitA microphone is perhaps the most important link in an audio chain. As the connection between the sound source and the sound system it must interact efficiently with both. Choosing this link successfully requires knowledge of the sound source the sound system including the room acoustics microphones and the actual application. The AMRLA is a Lavalier radio microphone kit which comes with a receiver transmitter PSU designed for use with the PDA200E or APQM outreach plate.

GBP 525.91
1

Ziton ZCC868 Radio Hub Configuration Cable amp Programming Software with PC Lead

Ziton ZCC868 Radio Hub Configuration Cable amp Programming Software with PC Lead

Ziton ZCC868 Radio Hub Configuration Cable Programming Software with PC LeadThe ZCC868 is a package including PC based Windows configuration software together with a customised interface cable to connect between the USB port on a PC and the 868 MHz wireless interface controllers from Ziton.The ZCC868 allows for local setup of a Ziton radio interface when programming via the on-board user interface on the interface itself is not convenient.Key FeaturesDesigned for the ZPR868-H Radio Hub moduleProvides easy local setup capability

GBP 79.82
1

EMS Firecell FCX-500-444 Four Loop Radio Hud with Remote Aerial Facility

EMS Firecell FCX-500-444 Four Loop Radio Hud with Remote Aerial Facility

EMS Firecell FCX-500-444 Four Loop Radio Hud with Remote Aerial FacilityThe FireCell Radio Hub connects to the FireCell Fire Control Panels XP95 loop. Operating in conjunction with FireCell Radio Cluster Communicators RCCs it is possible to create a wireless infrastructure cable of accommodating up to 504 wireless FireCell devices. This device is third party EN certified combining diversity aerial methodology Smart Cluster Technology and 32 channel selections to produce fast and reliable wireless communication.Key FeaturesSmart Cluster TechnologyInternal diversity aerialsDual band 868MHz operation32 radio channel selectionUp to 31 RCCsUp to 504 wireless FireCell devices when connected to four loopsXP95 loop poweredThird party EN certified

GBP 272.58
1

Cygnus SN.RB00.1 SmartNet-Pro Standard Radio Base

Cygnus SN.RB00.1 SmartNet-Pro Standard Radio Base

Cygnus SN.RB00.1 SmartNet-Pro Standard Radio BaseThe SmartNet-Pro Standard Radio Base is part of a range of detector heads including optical smoke heat and combi sensors. It is certified toEN 54-25 and uses analogue detection with intelligent sensing technology. It is also addressable through the SmartNet configuration tool.This 100 wireless radio base enables a mesh network to other devices and to the main panel through the Cygnus wireless protocol.Key FeaturesCertified to EN 54-25Analogue detection with intelligent sensing technologyAddressable through the SmartNet configuration toolLocking detector and base mechanism for enhanced securityUltra-low powered device 3.6v nominal100 wirelessBattery operated with a minimum three years battery lifeThe wireless addressable base enables a mesh network to other devices and to the main panel through the Cygnus wireless protocolSeparate interlocking ceiling mount plate for easy installationEasy to remove with detachment toolPatented self forming and self healing mesh Cygnus technologyMulti colour LED status indicationGloss white or red options available

GBP 204.94
1

CST GEN2-ACALL Radio Message Module Per Radio Base StationAlarmCall

CST GEN2-ACALL Radio Message Module Per Radio Base StationAlarmCall

CST GEN2-ACALL Radio Message Module Per Radio Base StationAlarmCallTheGEN2-ACALL is a Radio Message Module designed for use with the GEN2 software.GEN2 is a software solution that controls and monitors an entire messaging and alarm monitoring operation. Its the hub of all communication sending and receiving messages or alerts from all departments equipment and staff membersOnly the most efficient hotels run on Gen2 a software solution that controls and monitors an entire messaging and alarm monitoring operation. Gen2 is high performing multi-lingual user-friendly and Windows-based with the ability to facilitate an unlimited amount of client users. It is the hub of all communication sending and receiving messages or alerts from all departments equipment and staff members.Pre-set or formulate messages using the QWERTY keyboardand communicate critical events and data to any end point. Gen2 can send recurring messages and prompts such as maintenance reminders as well as one-time instant messages.Gen2 can route alerts to individuals or entire groups via different connections. As events escalate so can your recipient list. Whether its a status update or a life-safety alert you can be confident the right people will receive the information.Hot KeysUnlimited programmable hot keys for pre-defined and pre-set messages enabling swift alerts to pagers radios DECT phones email addresses and mobile users.Quick KeysImportant messages or alerts can be pre-set here easy to see and making communication to defined groups quick and simple.Multi-LingualGen2 supports English German French Spanish Dutch and standard Arabic.Quick SendUse the Qwerty keyboard to write and send all messages to any end user.Incoming MessagesView all incoming messages including time date and message in one single place.UsersGroupsContactsA list of all users contactable via Gen2 are listed here.Cloud StorageUsers can log in to Gen2 via Android and iOS operating devices.

GBP 1047.73
1

EMS FireCell FCX-438-001 Radio Network Communicator

EMS FireCell FCX-438-001 Radio Network Communicator

EMS FireCell FCX-438-001 Radio Network CommunicatorThe FireCell Radio Network Communicator RNC allows wireless 458MHz networking between FireCell Fire Control Panels and is 24Vdc powered. FireCell RNCs communicate in a mesh network topology simply requiring each RNC to be in range of another RNC within the network delivering maximum flexibility. All networkable FireCell Syncro AS and Syncro Control Panels are compatible with the FireCell RNC with up to eight RNCs permitted per network.Key FeaturesFlexible mesh network topologyLow current consumptionRemote aerial connectionUp to 8 RNCs per network24Vdc powered from control panel

GBP 498.96
1

Apollo XPA-MC-14101-APO XPander Manual Call Point - Integral Radio Base

Apollo XPA-MC-14101-APO XPander Manual Call Point - Integral Radio Base

Apollo XPA-MC-14101-APO XPander Manual Call Point - Integral Radio BaseThe XPander Manual Call Point is compliant with EN 54-11 and is a wireless device.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves.The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Please note The image is for illustrative purposes only.

GBP 164.53
1

EMS Firecell FC-555-024 Wireless Radio Cluster Communicator 24v DC

EMS Firecell FC-555-024 Wireless Radio Cluster Communicator 24v DC

EMS Firecell FC-555-024 Wireless Radio Cluster Communicator 24v DCThe 24Vdc FireCell RCC is a remote transceiver node that works within the FireCell wireless fire system. The RCC accommodates up to 31 wireless FireCell devices and can report directly to the Radio Hub or via other RCCs up to four hops for optimum flexibility and maximum wireless coverage. This device is third party EN certified combining diversity aerial methodology Smart Cluster Technology and 32 channel selection to produce fast and reliable wireless communication.Key FeaturesSmart Cluster TechnologyInternal diversity aerialsDual band 868MHz operation32 radio channel selectionUp to 31 FireCell devices per RCC24Vdc poweredThird party EN certifiedOptional external aerials available

GBP 221.76
1

CST PC-TX-DRBLL-1 Radio Paging Doorbell Push

CST PC-TX-DRBLL-1 Radio Paging Doorbell Push

CST PC-TX-DRBLL-1 Radio Paging Doorbell PushThe PC-TX-DRBLL-1 is a Radio Paging Doorbell Push which is part of the PageCall range.Expand the functionality and capability of your AlarmCall system with the PageCall range. PageCall offers an effective communication solution enabling you to summon key members of staff to a location quickly and discretely at the touch of a button.Integrate seamlessly with CST pagers to further expand your critical alerts and messaging solution.Key Features100mWChannel checkRed Tx LEDAAA battery

GBP 310.63
1

Electro Detectors Radio Sounder with LED Beacon EDA-A6030

Electro Detectors Radio Sounder with LED Beacon EDA-A6030

Electro Detectors Radio Sounder with LED Beacon EDA-A6030Designed to complement the range of EDA Radio Fire Alarm equipment the EDA-A6030 electronic sounder with LED beacon is powered entirely by internal batteries controlled and monitored by radio producing a range of different sound tones at a sound level equivalent to that of a normal hard wired electronic sounder. The bright LED beacon alerts occupants with hearing difficulties or areas where there is an already high ambient sound level to an alarm situation. In normal operation the sounder continuously listens via its built in radio receiver to any instruction emanating from its controlling panel. Once operating it continues to listen for further instructions to change tone or silence.To ensure that the integrity of the communication link is maintained frequent transmissions are made by the sounder to the control panel so that in the unlikely event of the radio signal failing to reach the panel a fault is reported. Other coded transmissions are made to signal faults including unit removal battery low receiver failure and where external devices are connected to it a fault in that wiring. The unit is fully addressable and can be assigned to a particular area allowing phased evacuation to be incorporated into the system.Key FeaturesEN54 Part 25Fully Addressable105dB At 1m adjustableSelectable Tones Controlled from PanelUp to 5 Year Battery lifeSmall attractive compact designCompatible with Zerio Plus PanelsAvailable with LED BeaconCall point input optionDesigned and built in the UK

GBP 226.56
1

Cygnus SN.RB00.2 SmartNet-Pro Standard Radio Base - Red

Cygnus SN.RB00.2 SmartNet-Pro Standard Radio Base - Red

Cygnus SN.RB00.2 SmartNet-Pro Standard Radio Base - RedThe SmartNet-Pro Standard Radio Base is part of a range of detector heads including optical smoke heat and combi sensors. It is certified toEN 54-25 and uses analogue detection with intelligent sensing technology. It is also addressable through the SmartNet configuration tool.This 100 wireless radio base enables a mesh network to other devices and to the main panel through the Cygnus wireless protocol.Key FeaturesCertified to EN 54-25Analogue detection with intelligent sensing technologyAddressable through the SmartNet configuration toolLocking detector and base mechanism for enhanced securityUltra-low powered device 3.6v nominal100 wirelessBattery operated with a minimum three years battery lifeThe wireless addressable base enables a mesh network to other devices and to the main panel through the Cygnus wireless protocolSeparate interlocking ceiling mount plate for easy installationEasy to remove with detachment toolPatented self forming and self healing mesh Cygnus technologyMulti colour LED status indicationGloss white or red options available

GBP 204.94
1

Apollo XPander Manual Call Point Integral Radio Base - XPA-MC-14006-APO

Apollo XPander Manual Call Point Integral Radio Base - XPA-MC-14006-APO

Apollo XPander Manual Call Point Integral Radio Base XPA-MC-14006-APOThe XPander Manual Call Point is compliant with EN 54-11. It is wireless and is powered by two independent packs of three AA alkaline batteries with a typical five year life.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves.The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key FeaturesWirelessXPERT addressingResettable elementFast response reports an alarm in under one secondLED to indicate operation

GBP 131.14
1