mcb.dk | Få success online

Carrier DZ-03 Standard Detector Base For C-9102 C-9103 I-9102 I-9103

Carrier DZ-03 Standard Detector Base For C-9102 C-9103 I-9102 I-9103A standard detector base suitable for use with the I-910x Series Detectors and for C-910x series Detectors.

GBP 3.78

1

Crowcon M048521 Adhesive Flow Plate Gasket For I-Test T4

Crowcon M048521 Adhesive Flow Plate Gasket For I-Test T4An Adhesive Flow Plate Gasket designed for use with the I-Test detector.

GBP 14.58

1

Fireclass 4B-I Isolator Detector Base

Fireclass 4B-I Isolator Detector BaseThe new 4B-I 4 Isolator base is designed to snap-fit to the ceiling tile adaptor or it can screw fix to a ceiling in the traditional manner. The 4B-I 4 base is designed specifically for use with the FC460 series detectors and provides protection against short circuit faults on the FireClass digital addressable loop.Key FeaturesFor use with the FC460 series detectorsCompact rigid design that improves the appearance and is easy to installDrives a remote indicatorUp to 250 x 4B-I 4 isolators can be connected on each loopSnap fit to the time saver ceiling tile adaptorDetector locking pin includedDetector park position for service and commissioningBreak-outs for surface mount

GBP 13.64

1

Crowcon AC0611 Adhesive Flow Plate Gasket For I-Test Gas-Pro

Crowcon AC0611 Adhesive Flow Plate Gasket For I-Test Gas-ProAn Adhesive Flow Plate Gasket For I-Test Gas-Pro.

GBP 16.52

1

Crowcon S011423 0-25 Vol. Oxygen I-Module Sensor

Crowcon S011423 0-25 Vol. Oxygen I-Module SensorReplacement spares including sensors are common across multiple products. The S011423 is a replacement 0-25 Vol. Oxygen I-Module Sensor.

GBP 115.92

1

Crowcon S011429M 0-2000ppm Hydrogen I-Module Sensor Assembly

Crowcon S011429M 0-2000ppm Hydrogen I-Module Sensor AssemblyReplacement spares including sensors are common across multiple portable products. The S011429M is a replacement 0-2000ppm Hydrogen I-Module Sensor Assembly.

GBP 490.86

1

Nittan ST-I-AS Ion Detector

Nittan ST-I-AS Ion DetectorThe ST-I-AS is a low cost elegantly designed low profile fire sensor which is aesthetically pleasing and enables the detector to blend unobtrusively into modern working environments.Key FeaturesFor for use with Nittan AS protocol control panelsLow profile stylish appearanceEasy to disassemble and reassemble for cleaningLegacy product

GBP 51.76

1

Crowcon S011439 0-100 LEL Butane I-Module Sensor Assembly

Crowcon S011439 0-100 LEL Butane I-Module Sensor AssemblyReplacement spares including sensors are common across multiple portable products. The S011439 is a replacement 0-100 LEL Butane I-Module Sensor Assembly.

GBP 172.20

1

Crowcon S011436 0-100 LEL Propane I-Module Sensor Assembly

Crowcon S011436 0-100 LEL Propane I-Module Sensor AssemblyReplacement spares including sensors are common across multiple portable products. The S011436 is a replacement 0-100 LEL Propane I-Module Sensor Assembly.

GBP 172.20

1

Crowcon S011427 0-20ppm Nitrogen Dioxide I-Module Sensor Assembly

Crowcon S011427 0-20ppm Nitrogen Dioxide I-Module Sensor AssemblyReplacement spares including sensors are common across multiple portable products. The S011427 is a replacement 0-20ppm Nitrogen Dioxide I-Module Sensor Assembly.

GBP 311.64

1

Crowcon S011424 0-100 LEL Methane I-Module Sensor Assembly

Crowcon S011424 0-100 LEL Methane I-Module Sensor AssemblyReplacement spares including sensors are common across multiple portable products. The S011424 is a replacement 0-100 LEL Methane I-Module Sensor Assembly.

GBP 172.20

1

Crowcon S011440 0-100 LEL Ethylene I-Module Sensor Assembly

Crowcon S011440 0-100 LEL Ethylene I-Module Sensor AssemblyReplacement spares including sensors are common across multiple portable products. The S011440 is a replacement 0-100 LEL Ethylene I-Module Sensor Assembly.

GBP 172.20

1

Crowcon S011426 0-10ppm Nitrogen Dioxide I-Module Sensor Assembly

Crowcon S011426 0-10ppm Nitrogen Dioxide I-Module Sensor AssemblyReplacement spares including sensors are common across multiple portable products. The S011426 is a replacement 0-10ppm Nitrogen Dioxide I-Module Sensor Assembly.

GBP 311.64

1

Crowcon S011460 0-100 LEL Hydrogen I-Module Sensor Assembly

Crowcon S011460 0-100 LEL Hydrogen I-Module Sensor AssemblyReplacement spares including sensors are common across multiple portable products. The S011460 is a replacement 0-100 LEL Hydrogen I-Module Sensor Assembly.

GBP 172.20

1

Crowcon S011437 0-100 LEL Pentane I-Module Sensor Assembly

Crowcon S011437 0-100 LEL Pentane I-Module Sensor AssemblyReplacement spares including sensors are common across multiple portable products. The S011437 is a replacement 0-100 LEL Pentane I-Module Sensor Assembly.

GBP 172.20

1

Crowcon S011912 0-500ppm Hydrogen Sulphide I-Module Sensor Assembly

Crowcon S011912 0-500ppm Hydrogen Sulphide I-Module Sensor AssemblyReplacement spares including sensors are common across multiple portable products. The S011912is a replacement Hydrogen Sulphide I-Module Sensor Assembly 0-500ppm.Please note The image is for illustrative purposes only.

GBP 166.32

1

Crowcon S011421 0-100ppm Hydrogen Sulphide I-Module Sensor Assembly

Crowcon S011421 0-100ppm Hydrogen Sulphide I-Module Sensor AssemblyReplacement spares including sensors are common across multiple portable products. The S011421 is a replacement Hydrogen Sulphide I-Module Sensor Assembly 0-100ppm.Please note The image is for illustrative purposes only.

GBP 166.32

1

Crowcon S011422 0-500ppm Carbon Monoxide I-Module Sensor Assembly

Crowcon S011422 0-500ppm Carbon Monoxide I-Module Sensor AssemblyReplacement spares including sensors are common across multiple portable products. The S011422 is a replacement Carbon Monoxide I-Module Sensor Assembly 0-500ppm.Please note The image is for illustrative purposes only.

GBP 199.58

1

Carrier C-94DB Deep Base for I-9403 I-9404 C-9403 C-9404 for Surface Cable Entry

Carrier C-94DB Deep Base for I-9403 I-9404 C-9403 C-9404 for Surface Cable EntryThe C-94DB is a deep surface mounting sounder backbox for use with a range of addressable and conventional sounders and beacons.The C-94DB is suitable for use with the following productsI-9403 Intelligent Sounder BeaconI-9404 Intelligent SounderC-9403 Conventional Sounder BeaconC-9404 Conventional Sounder

GBP 9.14

1

Crowcon S011741 0-100 LEL Flammable Unfiltered I-Module Sensor Assembly

Crowcon S011741 0-100 LEL Flammable Unfiltered I-Module Sensor AssemblyReplacement spares including sensors are common across multiple portable products. The S011460 is a replacement 0-100 LEL Flammable Unfiltered I-Module Sensor Assembly. Designed for use for Alcohols Ketones.

GBP 172.20

1

Crowcon S011950 0-100 LEL Pentane I-Module Sensor Assembly Australian Configuration

Crowcon S011950 0-100 LEL Pentane I-Module Sensor Assembly Australian ConfigurationReplacement spares including sensors are common across multiple portable products. The S011950 is a replacement 0-100 LEL Pentane I-Module Sensor Assembly Australian Configuration.

GBP 172.20

1

Crowcon S011949 0-100 LEL Methane I-Module Sensor Assembly Australian Configuration

Crowcon S011949 0-100 LEL Methane I-Module Sensor Assembly Australian ConfigurationReplacement spares including sensors are common across multiple portable products. The S011949 is a replacement 0-100 LEL Methane I-Module Sensor Assembly Australian Configuration.

GBP 172.20

1

Crowcon S012004 0-25 Oxygen Three Year CSA I-Module Sensor Assembly

Crowcon S012004 0-25 Oxygen Three Year CSA I-Module Sensor AssemblyReplacement spares including sensors are common across multiple products. The S012004 is a replacement 0-25 Oxygen Three Year CSA I-Module Sensor Assembly.Suitable for use withTetra 3

GBP 173.99

1

Carrier I-9404 Intelligent Sounder 24 VDC

Carrier I-9404 Intelligent Sounder 24 VDCThe I-9404 Intelligent Sounder is an audible notification device which can be activated by fire alarm control panel. In case of fire condition by command from the control panel the sounder will generate strong audible alarm signal to warn people evacuate from the building.Key FeaturesTwo-part structure with base mounted termination allows easy installation16 programmable alarm tonesOptional power saving mode or hi-consumption modeElectronically addressedSingledual address programmableComply with EN54-3

GBP 42.00

1

Carrier I-9602LW-LPG Addressable LPG Detector - 24VDC with Local Buzzer Alarm

Carrier I-9602LW-LPG Addressable LPG Detector - 24VDC with Local Buzzer AlarmThe I-9602LW Series Addressable Gas Detector is used to detect leakage of home use combustible gas LPG Natural Gas or Coal Gas in such areas as houses hotels and apartments. I-9602LW-LPG detector is specified for detection of Liquefied Petroleum Gas. When leakage is detected the detector will generate high buzzer alert sound and provide a dry contact to turn exhaust fan a 12VDC source to switch off the gas valve.The addressable detector can be linked into GST fire alarm system to carry out intelligent control.Key FeaturesDrift compensation to suit environment changing extensivelyElectronically addressedLocal buzzer alarmSelf-diagnosticRelay output for fan control and valve shut off

GBP 88.20

1

DIGITAL MARKETING

Brand

Merchant

Price (EUR)

Carrier DZ-03 Standard Detector Base For C-9102 C-9103 I-9102 I-9103

Crowcon M048521 Adhesive Flow Plate Gasket For I-Test T4

Fireclass 4B-I Isolator Detector Base

Crowcon AC0611 Adhesive Flow Plate Gasket For I-Test Gas-Pro

Crowcon S011423 0-25 Vol. Oxygen I-Module Sensor

Crowcon S011429M 0-2000ppm Hydrogen I-Module Sensor Assembly

Nittan ST-I-AS Ion Detector

Crowcon S011439 0-100 LEL Butane I-Module Sensor Assembly

Crowcon S011436 0-100 LEL Propane I-Module Sensor Assembly

Crowcon S011427 0-20ppm Nitrogen Dioxide I-Module Sensor Assembly

Crowcon S011424 0-100 LEL Methane I-Module Sensor Assembly

Crowcon S011440 0-100 LEL Ethylene I-Module Sensor Assembly

Crowcon S011426 0-10ppm Nitrogen Dioxide I-Module Sensor Assembly

Crowcon S011460 0-100 LEL Hydrogen I-Module Sensor Assembly

Crowcon S011437 0-100 LEL Pentane I-Module Sensor Assembly

Crowcon S011912 0-500ppm Hydrogen Sulphide I-Module Sensor Assembly

Crowcon S011421 0-100ppm Hydrogen Sulphide I-Module Sensor Assembly

Crowcon S011422 0-500ppm Carbon Monoxide I-Module Sensor Assembly

Carrier C-94DB Deep Base for I-9403 I-9404 C-9403 C-9404 for Surface Cable Entry

Crowcon S011741 0-100 LEL Flammable Unfiltered I-Module Sensor Assembly

Crowcon S011950 0-100 LEL Pentane I-Module Sensor Assembly Australian Configuration

Crowcon S011949 0-100 LEL Methane I-Module Sensor Assembly Australian Configuration

Crowcon S012004 0-25 Oxygen Three Year CSA I-Module Sensor Assembly

Carrier I-9404 Intelligent Sounder 24 VDC

Carrier I-9602LW-LPG Addressable LPG Detector - 24VDC with Local Buzzer Alarm

Powered by Cobiro