2.151 results (0,15213 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Aritech FG010 Universal Removal Tool on Swing Frame

Aritech FG010 Universal Removal Tool on Swing Frame

Aritech FG010 Universal Removal Tool on Swing FrameThe GE Security range of detector test and service equipment allows the user to rapidly and easily remove or test practically all smoke and heat detectors. Lightweight and rugged materials ensure long life and allow servicing up to heights of 9 m. The tools have an integrated design providing a complete solution with the minimum number of components.CompositionAll the test and removal tools fit to the lightweight strengthened fibreglass poles. The poles are nonconductive for safest operation. The telescopic pole extends from 1.3 m to 4.5 m in four sections and up to three 1.2 m extension poles can be added for maximum reach. A stylish canvas carry bag is available to hold and protect all the equipment.RemovalThe universal removal tool on a swing frame can remove detectors from 65 mm up to 110 mm in diameter. Colour coded cams are simply turned and snapped into place. The swing frame allows access to detectors that cannot be reached from directly underneath. A universal joint ensures that the detector remains parallel to the ceiling during extraction and replacement.Standard FeaturesQuick easy removal of detectorsSize adjustable to fit most detectorsUsed in conjunction with the ET010 and ET011 polesPlease note May not fit all point detector types

GBP 309.53
1

Aritech GS960-TR GS960 Tester And Calibration Tool For Optimal Functioning Of The Sensor In The Acoustic Space

Aritech GS960-TR GS960 Tester And Calibration Tool For Optimal Functioning Of The Sensor In The Acoustic Space

Aritech GS960-TR GS960 Tester And Calibration Tool For Optimal Functioning Of The Sensor In The Acoustic SpaceThe GS960-TR tester is a specially developed tool for calibrating and adjusting the GS960 Series for optimal function in the acoustic space the DRC Digital Room Compensation procedure. Using this tool to test the detector settings you do not need to open it again as the tester will communicate with the detector acoustically.

GBP 209.59
1

Gent ALD-302 Anti Ligature Base for the S-Quad Sensor Requires S4-700 Base

Gent ALD-302 Anti Ligature Base for the S-Quad Sensor Requires S4-700 Base

Gent ALD-302 Anti Ligature Base for the S-Quad Sensor Requires S4-700 BaseAnti-ligature base for the S-Quad Sensor Requires S4-700 baseThe S-Quad Anti Ligature Ceiling Mounted Base provides additional safety to occupants within secure facilities.The base has been designed with the entire S-Quad range and provides additional safety within buildings that accommodate people who are at risk.Approved for in-cell detection by the National Offender Management Service NOMS in England it now has an anti-tamper lip to prevent the storage of contraband between base detector.

GBP 216.56
1

Ziton ZP1-F4-MB ZP1 Main Board - 4 Zone Replacement Main PCB for the ZP1-F4-xx

Ziton ZP1-F4-MB ZP1 Main Board - 4 Zone Replacement Main PCB for the ZP1-F4-xx

Ziton ZP1-F4-MB ZP1 Main Board - 4 Zone Replacement Main PCB for the ZP1-F4-xxThe ZP1-F4-MB is a ZP1 Main Board - 4 Zone Replacement Main PCB designed for the ZP1-F4 range of panels.Key FeaturesMaximum system capacity device count Up to 1280Network size nodes Up to 16Maximum loop capacity 4Maximum zone capacity Up to 4Form factor SmallPhysical dimensions 163 x 60 x 245 mm W x H x DNet weight 245 gShipping weight 340 gMounting type In cabinet

GBP 205.84
1

Ziton ZP1-F2-MB ZP1 Main Board - 2 Zone Replacement Main PCB for the ZP1-F2-xx

Ziton ZP1-F2-MB ZP1 Main Board - 2 Zone Replacement Main PCB for the ZP1-F2-xx

Ziton ZP1-F2-MB ZP1 Main Board - 2 Zone Replacement Main PCB for the ZP1-F2-xxThe ZP1-F2-MB is a ZP1 Main Board - 2 Zone Replcement Main PCB designed for theZP1-F2 range.ZP1 fire control panels offer state of the art architecture in configurations that deliver an uncomplicated solution for small to mid-sized conventional applications. They feature an attractive contemporary design that fits with any decor. The gently curved door front offers a distinctive flair. Operator controls are inset in a striking blue lexan.With support for multiple lines of conventional detectors and accessories these quick-to-configure systems offer versatility that benefits building owners and installationmaintenance companies alike.The PanelThe ZP1-F2 is a conventional fire alarm control panel. It is supplied in local language with 2 zones that support up to 32 devices per zone as well as up to 2 supervised relay outputs dedicated to sounder control. In addition 2 conventional relay outputs dedicated to common fire and fault conditions as well as two user configurable inputs for monitoring and control are available.OptionsThe panels support 2 types of auxiliary relay boards one with 4 standard relays and one with 4 supervised relays. With these boards the panel outputs may be expanded with up to 8 additional outputs.Approvals ComplianceThe product line carries the following accreditationsRoHS compliantWEEE compliantNEN2535 NBNS21-100 and BS5839-1 compliantCPD certifiedEN542 EN544 and CE approvedType class conditions 3K5 of IEC 60721-3-3Key FeaturesModern elegant designEasy removable parts for quick and clean installationDefault regional setup modesNormal head-out intrinsically safe zone supportSupervised alarm notification outputsEN54 compliant potential free fire fault relaysClass change daynight remote reset facilitiesAuxiliary 24VDC supply output with reset supportDefault support for special functions such as - EN54 compliant user access levels - mixed zones - full front panel diagnostics - one-man walk testAuxiliary standard supervised relay output boardsNetworkable up to 64 zones

GBP 180.13
1

Teal Products MICROEVO2-24VS Micro Evo2 Chain Actuator 24V 150-600mm 400N - Silver

Teal Products MICROEVO2-24VS Micro Evo2 Chain Actuator 24V 150-600mm 400N - Silver

Teal Products MICROEVO2-24VS Micro Evo2 Chain Actuator 24V 150-600mm 400N - SilverMICRO EVO2 electric actuator with anti-corrosion treated double-link chain. Operating voltages 110-240V AC 50- 60Hz Hz or 24V DC. Self-adjusting end limit and soft stop closing to preserve the window frame and the actuator.It can be connected in parallel. Synchronisation function manageable directly on site for the application of more actuators on the same window. Colours available Silver Anodised Black RAL 9005 or White RAL 9003. Adjustable opening stroke of 150-300-450-600 mm using external dial located on side of the actuator.Key FeaturesOperating voltage 24V150-600mmHolding force 400NColour SilverPlease note The image is for illustrative purposes only. This product will come in the colour Silver.

GBP 246.71
1

Teal Products MICROEVO2-24VB Micro Evo2 Chain Actuator 24V 150-600mm 400N - Black

Teal Products MICROEVO2-24VB Micro Evo2 Chain Actuator 24V 150-600mm 400N - Black

Teal Products MICROEVO2-24VB Micro Evo2 Chain Actuator 24V 150-600mm 400N - BlackMICRO EVO2 electric actuator with anti-corrosion treated double-link chain. Operating voltages 110-240V AC 50- 60Hz Hz or 24V DC. Self-adjusting end limit and soft stop closing to preserve the window frame and the actuator.It can be connected in parallel. Synchronisation function manageable directly on site for the application of more actuators on the same window. Colours available Silver Anodised Black RAL 9005 or White RAL 9003. Adjustable opening stroke of 150-300-450-600 mm using external dial located on side of the actuator.Key FeaturesOperating voltage 24V150-600mmHolding force 400NColour BlackPlease note The image is for illustrative purposes only. This product will come in the colour Black.

GBP 246.71
1

Teal Products MICROEVO2-24VW Micro Evo2 Chain Actuator 24V 150-600mm 400N - White

Teal Products MICROEVO2-24VW Micro Evo2 Chain Actuator 24V 150-600mm 400N - White

Teal Products MICROEVO2-24VW Micro Evo2 Chain Actuator 24V 150-600mm 400N - WhiteMICRO EVO2 electric actuator with anti-corrosion treated double-link chain. Operating voltages 110-240V AC 50- 60Hz Hz or 24V DC. Self-adjusting end limit and soft stop closing to preserve the window frame and the actuator.It can be connected in parallel. Synchronisation function manageable directly on site for the application of more actuators on the same window. Colours available Silver Anodised Black RAL 9005 or White RAL 9003. Adjustable opening stroke of 150-300-450-600 mm using external dial located on side of the actuator.Key FeaturesOperating voltage 24V150-600mmHolding force 400NColour WhitePlease note The image is for illustrative purposes only. This product will come in the colour White.

GBP 246.71
1

Howler SA02HD Site Alert RF Heat Detector

Howler SA02HD Site Alert RF Heat Detector

Howler SA02HD Site Alert RF Heat DetectorComplementing the Howler Site Alert RF evacuation system the newSite Alert RF Heat Detectorgives you advanced warning when the situation is getting too hot and triggers the Howler Site Alert RF Alarms giving everyone the message to get out. Simple to configureand set up this unit makes the Howler Site Alert RF system ideal for timber-frame projects where advanced warning is particularly important for a quick escape.Key FeaturesSimple to configure and re-configure using dip switches no need for complicated tablet and programmingPowered using easily sourced low-cost alkaline batteries not specialist expensive battery packsDisconnection and battery status reflected by the Site Alert RF Master Unit know immediately when there is a unit disconnectedRadio-linkable via the Master unit to manual call-points fully wireless alarm systems with no trailing wires

GBP 410.64
1

Solo 330 Aerosol Smoke and CO Dispenser

Solo 330 Aerosol Smoke and CO Dispenser

Solo 330 Aerosol Smoke and CO DispenserThe Solo 330 smokeCO dispenser with its injection-moulded construction and swing frame make it the ideal tool for testing virtually all types and makes of modern smoke detectors at heights of up to 9 metres Using the SOLO100-001 Pole. Ergonomically designed for optimum use with the Solo Aerosol range together offering fully controlled and efficient testing. The Solo 330 is for use when testing detectors of up to 100mm in diameter.Robust - to withstand the rigours of everyday useStrength and durability - to ensure long lifeInjection-moulded plastic design - minimises weightSpring loaded mechanism - effective areosol deliveryDispenser and diaphram contain particles - conserves aerosolAerosol spray not directed at detector - sensor not swampedTouch sensitive - ideal for suspended ceilingsUniversal - suits most detectors from normal height to 9 metresClear cup and diaphram - allows view of detector LEDInterchangeable with all other Solo Tools

GBP 346.99
1

Advanced Lux Intelligent ELEDM3PSGAU Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with SilverGrey Finish Arrow Up

Advanced Lux Intelligent ELEDM3PSGAU Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with SilverGrey Finish Arrow Up

Advanced Lux Intelligent ELEDM3PSGAU Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with SilverGrey Finish Arrow UpThe Exi-LED exit sign is a reliable attractive product that offers excellent performance with long life and low energy benefits. Its slim but robust welded steel housing available in a selection of finishes provides a picture frame appearance around the brightly lit exit legend. These legends are available with a choice of directions and formats European or ISO.Although smaller than conventional fluorescent exit signs the Exi-LED still provides a useful 25 metre viewing distance in both mains and emergency modes with 15 high brightness white LEDs and state of the art reflector. The Exi-LED fully supports all features of the Lux Intelligent test system and complies with all the relevant requirements of EN60598.2.22.OperationThe Exi-LED panel features matrix dot coating to ensure the LEDs evenly illuminate the safety sign legend. Standard luminaires are supplied with integral maintained emergency control gear which in the event of a power failure will ensure the exit sign continues to operate with the same sign luminance for 3 Hours from the internal NiMH battery.InstallationThe Exi-LED mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover simply hooks onto the back plate and is retained with a single fixture located centrally on the base.Key FeaturesFully compatible with LuxIntelligent test systemLong life and low energy performanceSleek stylish designFully complies with all aspects of EN60598.2.22Please Note Although listed under Emergency Lighting the 230v version is not an emergency light and should not be used as one. The 230v version is only for use as a standard light fitting.

GBP 272.97
1

Advanced Lux Intelligent ELEDM3PSGAR Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with SilverGrey Finish Arrow Right

Advanced Lux Intelligent ELEDM3PSGAR Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with SilverGrey Finish Arrow Right

Advanced Lux Intelligent ELEDM3PSGAR Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with SilverGrey Finish Arrow RightThe Exi-LED exit sign is a reliable attractive product that offers excellent performance with long life and low energy benefits. Its slim but robust welded steel housing available in a selection of finishes provides a picture frame appearance around the brightly lit exit legend. These legends are available with a choice of directions and formats European or ISO.Although smaller than conventional fluorescent exit signs the Exi-LED still provides a useful 25 metre viewing distance in both mains and emergency modes with 15 high brightness white LEDs and state of the art reflector. The Exi-LED fully supports all features of the Lux Intelligent test system and complies with all the relevant requirements of EN60598.2.22.OperationThe Exi-LED panel features matrix dot coating to ensure the LEDs evenly illuminate the safety sign legend. Standard luminaires are supplied with integral maintained emergency control gear which in the event of a power failure will ensure the exit sign continues to operate with the same sign luminance for 3 Hours from the internal NiMH battery.InstallationThe Exi-LED mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover simply hooks onto the back plate and is retained with a single fixture located centrally on the base.Key FeaturesFully compatible with LuxIntelligent test systemLong life and low energy performanceSleek stylish designFully complies with all aspects of EN60598.2.22Please Note Although listed under Emergency Lighting the 230v version is not an emergency light and should not be used as one. The 230v version is only for use as a standard light fitting.

GBP 272.97
1

Advanced Lux Intelligent ELEDM3PSGAL Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with SilverGrey Finish Arrow Left

Advanced Lux Intelligent ELEDM3PSGAL Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with SilverGrey Finish Arrow Left

Advanced Lux Intelligent ELEDM3PSGAL Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with SilverGrey Finish Arrow LeftThe Exi-LED exit sign is a reliable attractive product that offers excellent performance with long life and low energy benefits. Its slim but robust welded steel housing available in a selection of finishes provides a picture frame appearance around the brightly lit exit legend. These legends are available with a choice of directions and formats European or ISO.Although smaller than conventional fluorescent exit signs the Exi-LED still provides a useful 25 metre viewing distance in both mains and emergency modes with 15 high brightness white LEDs and state of the art reflector. The Exi-LED fully supports all features of the Lux Intelligent test system and complies with all the relevant requirements of EN60598.2.22.OperationThe Exi-LED panel features matrix dot coating to ensure the LEDs evenly illuminate the safety sign legend. Standard luminaires are supplied with integral maintained emergency control gear which in the event of a power failure will ensure the exit sign continues to operate with the same sign luminance for 3 Hours from the internal NiMH battery.InstallationThe Exi-LED mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover simply hooks onto the back plate and is retained with a single fixture located centrally on the base.Key FeaturesFully compatible with LuxIntelligent test systemLong life and low energy performanceSleek stylish designFully complies with all aspects of EN60598.2.22Please Note Although listed under Emergency Lighting the 230v version is not an emergency light and should not be used as one. The 230v version is only for use as a standard light fitting.

GBP 272.97
1

Advanced Lux Intelligent ELEDM3PAL Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Left

Advanced Lux Intelligent ELEDM3PAL Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Left

Advanced Lux Intelligent ELEDM3PAL Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow LeftThe Exi-LED exit sign is a reliable attractive product that offers excellent performance with long life and low energy benefits. Its slim but robust welded steel housing available in a selection of finishes provides a picture frame appearance around the brightly lit exit legend. These legends are available with a choice of directions and formats European or ISO.Although smaller than conventional fluorescent exit signs the Exi-LED still provides a useful 25 metre viewing distance in both mains and emergency modes with 15 high brightness white LEDs and state of the art reflector. The Exi-LED fully supports all features of the Lux Intelligent test system and complies with all the relevant requirements of EN60598.2.22.OperationThe Exi-LED panel features matrix dot coating to ensure the LEDs evenly illuminate the safety sign legend. Standard luminaires are supplied with integral maintained emergency control gear which in the event of a power failure will ensure the exit sign continues to operate with the same sign luminance for 3 Hours from the internal NiMH battery.InstallationThe Exi-LED mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover simply hooks onto the back plate and is retained with a single fixture located centrally on the base.Key FeaturesFully compatible with LuxIntelligent test systemLong life and low energy performanceSleek stylish designFully complies with all aspects of EN60598.2.22Please Note Although listed under Emergency Lighting the 230v version is not an emergency light and should not be used as one. The 230v version is only for use as a standard light fitting.

GBP 348.85
1

Advanced Lux Intelligent ELEDM3PBK Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Down

Advanced Lux Intelligent ELEDM3PBK Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Down

Advanced Lux Intelligent ELEDM3PBK Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow DownThe Exi-LED exit sign is a reliable attractive product that offers excellent performance with long life and low energy benefits. Its slim but robust welded steel housing available in a selection of finishes provides a picture frame appearance around the brightly lit exit legend. These legends are available with a choice of directions and formats European or ISO.Although smaller than conventional fluorescent exit signs the Exi-LED still provides a useful 25 metre viewing distance in both mains and emergency modes with 15 high brightness white LEDs and state of the art reflector. The Exi-LED fully supports all features of the Lux Intelligent test system and complies with all the relevant requirements of EN60598.2.22.OperationThe Exi-LED panel features matrix dot coating to ensure the LEDs evenly illuminate the safety sign legend. Standard luminaires are supplied with integral maintained emergency control gear which in the event of a power failure will ensure the exit sign continues to operate with the same sign luminance for 3 Hours from the internal NiMH battery.InstallationThe Exi-LED mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover simply hooks onto the back plate and is retained with a single fixture located centrally on the base.Key FeaturesFully compatible with LuxIntelligent test systemLong life and low energy performanceSleek stylish designFully complies with all aspects of EN60598.2.22Please Note although listed under Emergency Lighting the 230v version is not an emergency light and should not be used as one. The 230v version is only for use as a standard light fitting.

GBP 348.85
1

SAS Caring Technology Touch-Wireless-CP-RU Touch Wireless Call Point with Call Reset Crash And Alarm Levels

SAS Caring Technology Touch-Wireless-CP-RU Touch Wireless Call Point with Call Reset Crash And Alarm Levels

SAS Caring Technology Touch-Wireless-CP-RU Touch Wireless Call Point with Call Reset Crash And Alarm LevelsDesigned for challenging environments. The room unit manufactured from injection molded Tritan Tx more resilient than Polycarbonate is low profile and vandal resistant. The unit is touch button actuated and any of the above configuration of active buttons can be achieved. The patient touches the area denoted by the orange paddle to activate a patient call. The hidden LED in the centre of the call point illuminates red when the buttons are touched. A low battery warning will sound when the battery is low. Upon detection of a low battery a CALL signal is sent out this will not be sent again until the battery has been changed. While the room units battery is low it will continue to flash its red LED every 15 seconds and sound its buzzer every 2 minutes. Staff should be made aware of this. The buttons in the frame staff only can be used by the nurse to reset the call. Included 2x torx M3.5 x 25mm security screws 3 x AAA batteries surface back box optionalThe wireless call points are a cost effective approach to add nurse call to an existing staff attack system. This helps keep disruption to a minimum since no walls need to be chased and are easily installed with an anti-ligature surface collar. The slave wireless call point syncs with a master IR receiver which is addressed to understand its location.LED FunctionGreen Battery goodYellow Battery should be changedRed Change battery nowPlease note The image is for illustrative purposes only.

GBP 202.50
1

SAS Caring Technology Touch-Wireless-CP-R Touch Wireless Call Point with Call Reset Reset And Test Levels

SAS Caring Technology Touch-Wireless-CP-R Touch Wireless Call Point with Call Reset Reset And Test Levels

SAS Caring Technology Touch-Wireless-CP-R Touch Wireless Call Point with Call Reset Reset And Test LevelsDesigned for challenging environments. The room unit manufactured from injection molded Tritan Tx more resilient than Polycarbonate is low profile and vandal resistant. The unit is touch button actuated and any of the above configuration of active buttons can be achieved. The patient touches the area denoted by the orange paddle to activate a patient call. The hidden LED in the centre of the call point illuminates red when the buttons are touched. A low battery warning will sound when the battery is low. Upon detection of a low battery a CALL signal is sent out this will not be sent again until the battery has been changed. While the room units battery is low it will continue to flash its red LED every 15 seconds and sound its buzzer every 2 minutes. Staff should be made aware of this. The buttons in the frame staff only can be used by the nurse to reset the call. Included 2x torx M3.5 x 25mm security screws 3 x AAA batteries surface back box optionalThe wireless call points are a cost effective approach to add nurse call to an existing staff attack system. This helps keep disruption to a minimum since no walls need to be chased and are easily installed with an anti-ligature surface collar. The slave wireless call point syncs with a master IR receiver which is addressed to understand its location.LED FunctionGreen Battery goodYellow Battery should be changedRed Change battery nowPlease note The image is for illustrative purposes only.

GBP 186.30
1

Advanced Lux Intelligent ELEDM3PAR Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Right

Advanced Lux Intelligent ELEDM3PAR Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Right

Advanced Lux Intelligent ELEDM3PAR Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow RightThe Exi-LED exit sign is a reliable attractive product that offers excellent performance with long life and low energy benefits. Its slim but robust welded steel housing available in a selection of finishes provides a picture frame appearance around the brightly lit exit legend. These legends are available with a choice of directions and formats European or ISO.Although smaller than conventional fluorescent exit signs the Exi-LED still provides a useful 25 metre viewing distance in both mains and emergency modes with 15 high brightness white LEDs and state of the art reflector. The Exi-LED fully supports all features of the Lux Intelligent test system and complies with all the relevant requirements of EN60598.2.22.OperationThe Exi-LED panel features matrix dot coating to ensure the LEDs evenly illuminate the safety sign legend. Standard luminaires are supplied with integral maintained emergency control gear which in the event of a power failure will ensure the exit sign continues to operate with the same sign luminance for 3 Hours from the internal NiMH battery.InstallationThe Exi-LED mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover simply hooks onto the back plate and is retained with a single fixture located centrally on the base.Key FeaturesFully compatible with LuxIntelligent test systemLong life and low energy performanceSleek stylish designFully complies with all aspects of EN60598.2.22Please Note although listed under Emergency Lighting the 230v version is not an emergency light and should not be used as one. The 230v version is only for use as a standard light fitting.

GBP 348.85
1