mcb.dk | Få success online

Haes TPCA018 Gas Flooding Zone PCB

Haes TPCA018 Gas Flooding Zone PCBA Gas Flooding Zone PCB.

GBP 194.65

1

Crowcon E01748 Internal Gas Alarm 24Vdc

Crowcon E01748 Internal Gas Alarm 24VdcReplacement spares are common across multiple Crowcon products. The E01748 is a spare Internal Gas Alarm 24Vdc.

GBP 322.70

1

International Gas Detectors T750BAV-O2-NHS Gas Detector with Audible Visual Alarms

International Gas Detectors T750BAV-O2-NHS Gas Detector with Audible Visual AlarmsThe TOC-750 is factory calibrated for its target gas. The target gas is indicated on the product i.e. CH4 LPG etc.The TOC-750 will respond to any flammable gas but can only be calibrated to be correct response to one.The detector front assembly simply plugs onto the indicated connector. Alarm actions are indicated on the following page for each detector type. This makes service replacement vert simple as the toxic IR detector assembly is pre-calibrated and can just be plugged in to enable operation.The detector node relay output can be used as an alarm interface to external systems run additional audio-visual alarms or directly control other devices. Typical applications could be gas solenoid valves boiler shut down interfaces or similar. When switching external loads it is important to consider the nature of the load being switched. For inductive loads suitable protection from induced back EMF must be fitted. Many modern devices conforming to the European EMC Directive may already have devices fitted as part of their design to limit in-rush currents and back EMF. Where these are not fitted the following two diagrams provide guidance. Failure to observe this may result in damage to the detector node.

GBP 392.63

1

International Gas Detectors TOC-750X-PHC ATEX TOC-750X Gas Detector - PHC Sensor Standard Range 0-100 LEL

International Gas Detectors TOC-750X-PHC ATEX TOC-750X Gas Detector - PHC Sensor Standard Range 0-100 LELBuilding on IGDs existing 102 Series Gas Detectors the 750 Series add 2-Wire addressable technology. Using IGD Sentinel 2-Wire protocol the 750 Series communicate over the detector power cables. This reduces cabling and terminations whilst improving reliability. Sentinel protocol continuously monitors data between connected detectors and the system controller ensuring maximum system availability. With only two wires for power and communication existing systems can be easily upgraded using existing cables with the option to easily add more detectors where required.750 Series Gas Detectors ATEX Gas Detectors provide the ultimate in safety for gas detection in hazardous areas. Approved to the latest ATEX standards and utilising IGDs 2-Wire Sentinel technology this range is simple to install robust in operation with peace of mind that plant and personnel are effectively protected. IGDs comprehensive range provides protection for all your gas hazards

GBP 337.50

1

International Gas Detectors 5930401 102 Series Flow Cell

International Gas Detectors 5930401 102 Series Flow CellThe 5930401 is a 102 series flow cell 750 Series Gas 3 Port Flow Cell for IGD Detectors Ports

GBP 308.57

1

International Gas Detectors 5133901 Type 6 Duct Adaptor

International Gas Detectors 5133901 Type 6 Duct AdaptorThe 5133901 is a Type 6 Duct Adaptor designed for use with the ATEX 102 MK3 and 750 Gas Detectors.

GBP 279.64

1

International Gas Detectors Duct Mount Pitot Kit 5139002

International Gas Detectors Duct Mount Pitot Kit 5139002The pitot duct adaptor relies on the gas velocity in a process to induce a flow in the probe to deliver gas to the gas detector. Typical applications are ventilation duct monitoring in a variety of processes. With this type of unit the detector is remote from the pilot assembly by tubing. This is particularly useful where mounting onto sheet metal duct work which will not take the weight of Type 3 Type 4 or Dynamic style adaptors. Note that this style of probe works best where there is negligible duct and debris in the gas system.

GBP 189.32

1

International Gas Detectors TOC-750X-BCL3 ATEX TOC-750X Gas Detector - BCL3 Sensor Safe Area Operation Only Standard Range 0-10ppm

International Gas Detectors TOC-750X-BCL3 ATEX TOC-750X Gas Detector - BCL3 Sensor Safe Area Operation Only Standard Range 0-10ppmBuilding on IGDs existing 102 Series Gas Detectors the 750 Series add 2-Wire addressable technology. Using IGD Sentinel 2-Wire protocol the 750 Series communicate over the detector power cables. This reduces cabling and terminations whilst improving reliability. Sentinel protocol continuously monitors data between connected detectors and the system controller ensuring maximum system availability. With only two wires for power and communication existing systems can be easily upgraded using existing cables with the option to easily add more detectors where required.750 Series Gas Detectors ATEX Gas Detectors provide the ultimate in safety for gas detection in hazardous areas. Approved to the latest ATEX standards and utilising IGDs 2-Wire Sentinel technology this range is simple to install robust in operation with peace of mind that plant and personnel are effectively protected. IGDs comprehensive range provides protection for all your gas hazards

GBP 397.05

1

Crowcon SS0712B Gas-Pro Main PCB Board B B2 Variant Including 4 Screws

Crowcon SS0712B Gas-Pro Main PCB Board B B2 Variant Including 4 ScrewsA Main PCB for the Gas-Pro portable multi gas detector.Key FeaturesComes with 4 screwsBoard B B2 Variant

GBP 307.15

1

International Gas Detectors Dynamic Duct Adaptor 5999201

International Gas Detectors Dynamic Duct Adaptor 5999201The Dynamic duct adaptor relies on the gas velocity in a process to induce a flow in the probe to deliver gas to the gas detector. Typical applications are ventilation duct monitoring in a variety of processes. The clamp flange arrangement allows easy removal of the detector for service access and during fitment to the process. Internal baffles protect the detector and allow the optional fitting of filters if required. Typically the probe operates down to a minimum of 3MS. The internal baffle arrangement provides a degree of protection against foreign matter and a degree of temperature protection up to a process temperature of 70 degrees centigrade. In the event of flow failure gas will still be monitored by diffusion into the probe although response times will be extended. A calibration port is provided as part of the assembly.

GBP 221.79

1

Crowcon S011375KDF 0-100 LEL Flammable Gas AUS Alarms Specify Calibration

Crowcon S011375KDF 0-100 LEL Flammable Gas AUS Alarms Specify CalibrationTheS011375KDF manufactured by Crowcon is a 0-100 LEL flammable gas AUS alarms specify calibration.

GBP 247.86

1

International Gas Detectors 5925801 Universal Pole Clamp 103 Series Detectors

International Gas Detectors 5925801 Universal Pole Clamp 103 Series Detectors The International Gas Detectors 5925801 is a universal pole clamp 103 series detectors for 102 TOC-30 AND 50 TO 200mm DIA POLES

GBP 209.25

1

International Gas Detectors TOC-635-MIC Micro Gas Detection Control Panel

International Gas Detectors TOC-635-MIC Micro Gas Detection Control PanelThe TOC-635 system controller From IGD uses the latest Sentinel digitally addressable technology. Specifically designed for gas detection systems Sentinel combines fast reliable response data security and easy to use error proof features for the system you need.EASY TO INSTALLJust one 2 Core cable minimising costsNo cable polarity for fast easy installOne-click auto-setup self-check ready to useSIMPLE SERVICINGHot-swap detectors for exchange without engineer costAuto-detect allows simple changes with no call out costsInbuilt web pages enable you to view and download EventsFLEXIBLESingle cable interconnection to other devicesAdd or remove devices with a simple Find function to update controllerInstall ancillaries locally to the nearest detectorCOST EFFECTIVELow-cost system for 1-8 or 1-32 devicesSingle cable can save you 70-80 install costsAuto setup removes commissioning costsREASSURINGLY COMPETENTDesigned and manufactured in the UK by IGDBackup by 10-year WarrantyAll compliance supported by a third-partyCertification

GBP 262.56

1

International Gas Detectors 5923001 Sample Flange Assembly

International Gas Detectors 5923001 Sample Flange AssemblyThe 5923001 is a sample flange assembly bulkhead mounted for tube compression fitting.

GBP 303.75

1

International Gas Detectors TOC-750-AP1 2-wire Annunciator

International Gas Detectors TOC-750-AP1 2-wire AnnunciatorReplace dumb beacon sounders with TOC-750 Annunciators and have meaningful alarm messages displayed. The TOC-750-AP1 features sounder relay colour change display MK7 pellistor and emergency stop.TOC 750 Series Annunciators add extra flexibility to addressable gas detection systems combining a colour alarm display with E-Stops Key Switches or other inputs and now flammable gas detectors. TOC750 Series Annunciators reduce the number of system components required in systems whilst adding flexibility. TOC750 Series Annunciators reduce costs whilst enhancing installed systems. Only 2 Wires for Power and Comms TOC750 Series Annunciators provide clear segregation between gas detection alarms and other alarm systems.

GBP 319.95

1

Crowcon Carbon Monoxide 0-1000ppm T4 or 0-2000ppm Gas-Pro Replacement Sensor SS0302

Crowcon Carbon Monoxide 0-1000ppm T4 or 0-2000ppm Gas-Pro Replacement Sensor SS0302The SS0302 is a replacement Carbon Monoxide 0-1000ppm sensor module for the T4 portable gas monitor or 0-2000ppm H2 filtered for the Gas-Pro units.Compatible withGas-ProT4

GBP 267.30

1

Crowcon SS0207 Carbon Monoxide Sensor 0-1000 ppm for Gas-Pro and T4

Crowcon SS0207 Carbon Monoxide Sensor 0-1000 ppm for Gas-Pro and T4Replacement spares including sensors are common across multiple fixed gas products. The SS0207 is a replacement Carbon Monoxide sensor module 0-1000 ppm designed for use with the Gas-Pro and T4 detectors.Compatible withGas ProT4Please note The image is for illustrative purposes only.

GBP 181.76

1

Crowcon SS0206 Hydrogen Sulphide Sensor 0-100 ppm for Gas-Pro and T4

Crowcon SS0206 Hydrogen Sulphide Sensor 0-100 ppm for Gas-Pro and T4Replacement spares including sensors are common across multiple fixed gas products. The SS0206 is a replacement Hydrogen Sulphide sensor module 0-100 ppm designed for use with the Gas-Pro and T4 detectors.Compatible withGas ProT4Please note The image is for illustrative purposes only.

GBP 181.76

1

International Gas Detectors Type 3 Duct Adaptor 5133801

International Gas Detectors Type 3 Duct Adaptor 5133801Type 3 duct adaptors rely on gas diffusion to the detector. Typical applications are head space monitoring in tanks vessels or duct work. The clamp flange arrangement allows easy removal of the detectors for service access and during fitment to the process. Internal baffles protect the detector and allow the optional fitting of filters if required.

GBP 320.49

1

International Gas Detectors Type 4 Duct Adaptor 5133701

International Gas Detectors Type 4 Duct Adaptor 5133701Type 4 duct adaptors rely on gas diffusion to the detector. Typical applications are head space monitoring in tanks vessels or duct work. The clamp has a 1 BSP thread making it suitable for installation into threaded bosses or by using locknuts. Internal baffles protect the detector and allow the optional fitting of filters if required.

GBP 218.57

1

Crowcon S011375USA 0-100 LEL Flammable Gas USA Alarms UL Approval Specify Calibration

Crowcon S011375USA 0-100 LEL Flammable Gas USA Alarms UL Approval Specify CalibrationThe S011375USA manufactured by Crowcon is a 0-100 LEL flammable gas USA alarms UL approval specify calibration.

GBP 268.27

1

International Gas Detectors 401101 Flow Through Cell

International Gas Detectors 401101 Flow Through Cell The 401101 is a flow through cell 102 Series Detector Accessory for MK3 and 14 BSP or to order.

GBP 212.14

1

Crowcon SS0712A Gas-Pro Main PCB Board A B1 Variant cw 4 Screws

Crowcon SS0712A Gas-Pro Main PCB Board A B1 Variant cw 4 ScrewsReplacement spares are common across multiple Crowcon products. The SS0712A is a replacement Gas-Pro Main PCB Board A B1 Variant.Key FeaturesComes with 4 x screws

GBP 321.73

1

International Gas Detectors TOC-750-O3 Safe Area Gas Detector - Ozone Sensor Range 0-5ppm

International Gas Detectors TOC-750-O3 Safe Area Gas Detector - Ozone Sensor Range 0-5ppmBuilding on IGDs existing Addressable Gas Detectors the 750 Series add 2-Wire addressable technology. Using IGDs Sentinel 2-Wire protocol the 750 Series communicate over the detector power cables. This reduces cabling and terminations whilst improving reliability. Sentinel protocol continuously monitors data between connected detectors and the system controller ensuring maximum system availability. With only two wires for power and communication existing systems can be easily upgraded using existing cables with the option to easily add more detectors where required.Tocsin 750 Series detector systems have a number of standard interfaces available on-board each unit. The standard PCB set allows interface either Toxic Oxygen or Flammable Detectors. Communication to the system controller uses IGDs latest Sentinel 2-Wire protocol for speed of installation and increased reliability. Existing analogue systems can be quickly updated to 2-Wire addressable systems. In addition each module has a flexible range of additional interfaces to easily add slam switches beacon-sounders and other readings to the system

GBP 413.59

1

International Gas Detectors TOC-750-PX1 ST STL Pressure Transducer

International Gas Detectors TOC-750-PX1 ST STL Pressure TransducerThe TOC-750-PX1 is a ST STL Pressure Transducer.Key Features0-345 Bar0.5 Accuracy

GBP 221.40

1

DIGITAL MARKETING

Brand

Merchant

Price (EUR)