9 results (0,13933 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Smoke Sabre Hand Held Smoke Detector Tester 150ml

Smoke Sabre Hand Held Smoke Detector Tester 150ml

Smoke Sabre Hand Held Smoke Detector Tester 150mlSmoke Sabre is a major step forward in the design of smoke detector testers. All other pressurized aerosol smoke alarm testers have the inherent drawback that if misused they leave harmful residue on the casing and or inside the chamber of the detector.This residue can discolour the detector plastic can attract dust affect sensitivity and in some cases lead to corrosion cracking or even complete failure of the detector. Residue occurs when testing aerosols are used too close to the detector or smoke alarm despite instructions not to do so. SmokeSabre cannot be used too close to the detector and eliminates harmful residue while focusing and targeting the canned smoke test gas. When SmokeSabre is in the closed position the sabre prevents access to the spray button.The aerosol can only be activated when the sabre is fully extended. In use air is drawn through the holes in the sabre and this coupled with the venturi effect involved assists the velocity and vaporization process of the airborne smoke particles. The result is a more effective test delivering better detector activation using less gas per test and reducing costs while eliminating harmful residue.Key FeaturesMore tests per canFaster detector activation and clearingLowest cost per testThe end of harmful residue risk is designed out with the sabreSilicone free testingEco-responsibility 100 bio-degradable sabre ozone friendly no CFCs and low GWPDetector manufacturer endorsementUL and ULC listed150ml can

GBP 20.10
1

No Climb SoloC6-001 CO Test Aerosol Non-Flammable

No Climb SoloC6-001 CO Test Aerosol Non-Flammable

No Climb SoloC6-001 CO Test Aerosol Non-FlammableDesigned for use with domestic carbon monoxide CO detectors the Solo C6 is a hand-held tester spray that does not require specialist equipment such as dispensers. It is supplied with an applicator straw which introduces CO to the detector sensor in a controlled manner.For use with straw provided to directly test CO alarms.Key FeaturesFor testing domestic carbon monoxide detectorsHand-held - no need for specialist dispensing equipmentSupplied complete with applicator strawIntroduces CO to the detector sensor in a controlled mannerContents approx. 4 litresNon-flammable compressed gasDue to the nature of the contents the aerosol feels very lightweight

GBP 30.32
1

Solo A10S Smoke Detector Test Gas Canister 250ml Non-Flammable

Solo A10S Smoke Detector Test Gas Canister 250ml Non-Flammable

Solo A10S Smoke Detector Test Gas Canister 250ml Non-FlammableThe new Solo A5 and Solo A10 have been designed to replace the Solo A3 and are suitable for testing all types of smoke detectors installed into buildings all around the world. Solo A10 is positioned very much as the every day tester. If a flammable solution is essential there is the Solo A5.The Solo A10S due to its 250ml bottle size fits directly into the Solo 330332 but can also be used as a hand-held gas canister. Test gas works by delivering smoke particles to the detector under test replicating the conditions of smoke from a fire in a safe and clean manner.Solo A5 and Solo A10 have been created to use different gasses to the Solo A3 this is because a gas within the A3 called HFC 134a has been identified in recent years by world governing bodies as harmful to the environment.Key FeaturesDetector manufacturer approvedDesigned for use with Solo 330332 dispenserCompliant with regulationsUL certified

GBP 35.40
1

Kidde KE-DP3120W Excellence Series Intelligent Addressable Dual Optical Detector With ISO - White

Kidde KE-DP3120W Excellence Series Intelligent Addressable Dual Optical Detector With ISO - White

Kidde KE-DP3120W Excellence Series Intelligent Addressable Dual Optical Detector With ISO - WhiteThe innovative Excellence range of intelligent addressable devices offers advanced features for reliability and peace of mind. Coupled with features for ease of installation and maintenance on new fire detection systems its a perfect match for exceptional overall performance.The DP3120W is a Kidde Excellence series signal white addressable dual optical detector with integrated short circuit isolation. It combines a low profile design with tri-colour status indication with 360 visibility. A remote indicator output is available as standard that supports a remote indicator up to 30 m away.Detection reliability is ensured by combining dual optical wavelengths with multiple detection angles. This allows for state-of-the-art particle size detection that differentiates between real sources of alarm or nuisance sources such as dust and steam.Key FeaturesIntegrated loop short circuit isolation ensures operation during a single short circuit on the loopShort circuit isolation on remote output for additional device protectionNuisance alarm steam dust discrimination for peace of mindTri-colour indicators for alarm pre alarm isolation fault. ItsMe and communications takes the guesswork out of operational status360 indicator visibility means no device alignment to ensure visibilityNew mechanical rotary addressing for easy addressingEvent logging in the device for diagnostics purposes when neededAll alarm levels EN54 certifiedCan be used with Scorpion tester where detectors are difficult or impossible to access

GBP 40.46
1

Solo A5 Smoke Detector Test Gas Canister 250ml Flammable

Solo A5 Smoke Detector Test Gas Canister 250ml Flammable

Solo A5 Smoke Detector Test Gas Canister 250ml FlammableThe new Solo A5 and Solo A10 have been designed to replace the Solo A3 and are suitable for testing all types of smoke detectors installed into buildings all around the world. Solo A5 is positioned very much as the every day tester. If a non-flammable solution is essential there is the Solo A10.The Solo A5 fits directly into the Solo 330332 but can also be used as a hand-held test gas canister. Test gas works by delivering smoke particles to the detector under test replicating the conditions of smoke from a fire in a safe and clean manner.Solo A5 and Solo A10 have been created to use different gasses to the Solo A3 this is because a gas within the A3 called HFC 134a has been identified in recent years by world governing bodies as harmful to the environment. Therefore as of the 31st December 2017 No Climb will no longer be able to manufacture Solo A3 stock already produced can still be used and a limited quantity can be bought from us while stock lasts.What No Climb products are affectedThe new regulations mean that Solo A3 Solo A7 Aero 300 Chekkit Smoke gas canisters will be phased out.When will they be phased outThe manufacturer No Climb will no longer be able to manufacture these products after 31st December 2017 however we do still have very limited stock of these products but once theyre all gone we will not be ordering any surplus stock up please Contact Us to find out more.Key FeaturesDetector manufacturer approvedDesigned for use with Solo 330332 dispenserCompliant with regulationsUL certified

GBP 20.28
1

Solo A10 Smoke Detector Test Gas Canister 150ml Non-Flammable

Solo A10 Smoke Detector Test Gas Canister 150ml Non-Flammable

Solo A10 Smoke Detector Test Gas Canister 150ml Non-FlammableThe new Solo A5 and Solo A10 have been designed to replace the Solo A3 and are suitable for testing all types of smoke detectors installed into buildings all around the world. Solo A10 is positioned very much as the every day tester. If a flammable solution is essential there is the Solo A5.The Solo A10 is available in a 150ml bottle and can be used as a hand-held test gas canister. Test gas works by delivering smoke particles to the detector under test replicating the conditions of smoke from a fire in a safe and clean manner.Solo A5 and Solo A10 have been created to use different gasses to the Solo A3 this is because a gas within the A3 called HFC 134a has been identified in recent years by world governing bodies as harmful to the environment. Therefore as of the 31st December 2017 No Climb will no longer be able to manufacture Solo A3 stock already produced can still be used and a limited quantity can be bought from us while stock lasts.What No Climb products are affectedThe new regulations mean that Solo A3 Solo A7 Aero 300 Chekkit Smoke gas canisters will be phased out.When will they be phased outThe manufacturer No Climb will no longer be able to manufacture these products after 31st December 2017 however we do still have very limited stock of these products but once theyre all gone we will not be ordering any surplus stock up please Contact Us to find out more.Will They be replacedTwo aerosols are being brought out Solo A5 and Solo A10 which can be used in the Solo 330 dispensers both products will offer a comparable performance to Solo A3. The Solo A10 offers a 150ml version which will be suitable for replacing the Aero 300 hand-held smoke gas canister alternatively the SmokeSabre will also be a relevant replacement. Unfortunately the Solo A7 detector air duster is not going to have a replacement.

GBP 22.20
1

Fike 204-0003 Twinflex Multipoint ASD Detector

Fike 204-0003 Twinflex Multipoint ASD Detector

Fike 204-0003 Twinflex Multipoint ASD DetectorThe Multipoint and ASD detectors have set new standards in detector technology. The TWINFLEX Multipoint head is a 2-wire device used with the TWINFLEX and TWINFLEX Pro systems whereas the addressable ASD detector is used on the Sita200plus Duonet and Quadnet systems. Using microprocessor control these devices offer the installer a full range of detection capabilities with audible and visual warning in one compact device for full DDA compliance.The detectors can be matched to the environment in which they are installed and changed any time during the lifetime of the installation. The mode of detection required can be changed simply by configuring the DIL switch in the detector electronics module configurable via commissioning software on addressable systems. All modes are compliant with European detector type specifications.The TWINFLEX two-wire Multipoint detector can be set to any one of 3 smoke modes 3 heat modes as well as a Combined Mode Smoke 2 and Heat 2 where a smoke or heat source can trigger a fire decision - see opposite. The end user is given optimum fire protection even if the installer is unsure of the use of the particular area where the detector is sited. All TWINFLEX products including the Multipoint detector feature an End of Line switch negating the need for end-of-line resistors.The Multipoint and ASD detectors have the unique benefit of an optional full specification integral sounder where 90dBA output can be achieved. The two-wire Multipoint detector can be set to 3 different sound patterns as well as switched off with 2 sound output levels. The addressable ASD detector has 7 different sound patterns and 3 volume settings as well as the option of a combined strobe.Key FeaturesIntegral Strobe - The Multipoint ASD can be ordered with an optional integral strobe allowing the 2-wire installation of an advanced smokeheat detector sounder and strobe in a single cost-saving device.Base LED - When the detector head is removed a base mounted LED flashes allowing users to easily identify which head is missing even from considerable distance e.g. in a high-ceiling building.Head Removal Tool - The Multipoint ASD detector removal tool fits the Solo Detector Tester pole for easy testing and maintenance at height.Optical Chamber - The Multipoint ASD detector incorporates a new advanced optical chamber for enhanced smoke detection.Modes of DetectionSmoke 1 Used where ionisation detectors are normally fitted especially when there are high ceilings or a risk of free burning fires chemical stores etc. or fires that need to be detected extremely quickly.Smoke 2Used where optical detectors are normally fitted when there is a risk of a smouldering fire and for escape routes.Smoke 3Designed for use in areas that are prone to nuisance alarms. The reduced sensitivity linked with a time delay feature means that a higher concentration of smoke needs to be present for a constant time period before a fire decision is made. For example this setting is ideal for hotel bedrooms with en-suite shower rooms. The installer or service engineer can change the setting from smoke 2 to smoke 3 if nuisance alarms are a problem whilst still offering optimum protection of a smoke detection setting.Heat 1 Rate of RiseUsed where a standard rate of rise detector would normally be used.Heat 2 Standard Fixed Temperature - 58C approx. Used where a standard fixed temperature heat detector would normally be fitted suitable for kitchens etc.Heat 3 High Fixed Temperature - 90C approx. Used where a high fixed temperature heat detector would normally be fitted. Suitable for commercial kitchens boiler rooms etc.

GBP 32.12
1