mcb.dk | Få success online

Vimpex SL-HDP-EOL Signaline HD EOL - Programmable Linear Heat Cable End of Line

Vimpex SL-HDP-EOL Signaline HD EOL - Programmable Linear Heat Cable End of LineThe End of Line unit is made from marine grade aluminium and is IP67 rated ensuring system integrity in the harshest environments.Signaline HD is an advanced Programmable Temperature Linear Heat Detector. When used with the Signaline HD Controller and EOL the user can select various alarm response temperatures or class as well as pre-alarm sengs.The controller is easily adjusted for the length of cable being used.

GBP 158.63

1

Vimpex SL-HDP-JB Signaline HD JB Programmable Linear Heat Cable Junction Box

Vimpex SL-HDP-JB Signaline HD JB Programmable Linear Heat Cable Junction BoxSignaline HD is a programmable Linear Heat Detector. It offers users the ability to set their own alarm temperatures as well as a pre-alarm feature and rate-of-rise alarm. Signaline HD linear heat detection system uses a special sensor cable. This cable runs along the entire area that needs protection. It works as a continuous heat sensor. It can detect temperature changes anywhere along its length due to resistance changes within the sensor cable.The Signaline HD system has a smart control unit. This unit checks the sensor cable for temperature changes all the time. Users can set specific alarm rules in the control unit. This lets them adjust the system based on the area level of risk approval standard and alarm temperature required. Where needed you can connect two lines of cable or leader cable to Signaline HD Sensor cable. To do this the Signaline HD JB should be used. This IP rated and high impact resistance box provides a secure and easy connection between two lines of cable.

GBP 135.56

1

Vimpex Signaline SL-FXA Nylon Fixing Clip Pack of 100

Vimpex Signaline SL-FXA Nylon Fixing Clip Pack of 100The SL-FXA is a low cost plastic fixation for use with Signaline Linear Heat Detector Cables. Manufactured from nylon with M6 fixing holes complete with cable tie it is deal for installation where heat transfer from the fixing point to the linear heat detection cable must be minimised.Key FeaturesPack of 100Dimensions 12mm x 27mm x 16mmMounting Wall or ceilingMaterial NylonColour WhiteFor use with Signaline Linear Heat Detector Cables

GBP 91.24

1

Ziton ACA-JBW Junction Box IP6566 with Cable Glands amp Terminals

Ziton ACA-JBW Junction Box IP6566 with Cable Glands TerminalsThe ACA-JBW junction box is designed to join and protect linear heat sensor cable against damage when cable joints are required. The ACA-JBW is weatherproof and is supplied with cable glands and terminals to facilitate connection of cables even in harsh environments.Key FeaturesEasy connections of linear heat cableHigh IP rating for outdoor applicationsSupplied with connection terminals and glands

GBP 117.67

1

Ziton ACA-CP-100 quotPquot Clip cw Silicon Sleeve - Pack of 100

Ziton ACA-CP-100 P Clip cw Silicon Sleeve - Pack of 100The ACA-CP series P clip is designed to secure LHD linear heat detection sensor cable. Every clip is supplied with a silicone pad. The pad protects the cable from mechanical damage and insulates it from the clip to protect it against heat transfer between the mounting surface and the sensor cable.InstallationRecommended spacing 1mKey FeaturesEasy installation of linear heat cableAvailable in aluminiumPack of 100

GBP 98.06

1

Ziton ACA-TW17-025 Tie Wrap PA66 170C 338F - Pack of 25

Ziton ACA-TW17-025 Tie Wrap PA66 170C 338FThe ACA-TW series tie wraps cable ties is designed to secure linear heat sensor cable to the LHD brackets and clips. The tie wraps are available in various temperature ratings for matching or surpassing the temperature specifications of the selected LHD sensor cable.UV stabilised and stainless steel variants are suitable for outdoor applications whilst stainless steel variants additionally allow for the installation of very high temperature digital cable.A tool ACA-TWT is available for the stainless steel tie wrap installation.Key FeaturesEasy installation of linear heat cableFor use with LHD brackets and clipsIndoor applicationsAvailable in ETFE Ethylene tetrafluoroethylenePack of 25

GBP 92.92

1

Ziton ACA-TWSS-100 Tie Wrap Stainless Steel - Pack of 100

Ziton ACA-TWSS-100 Tie Wrap Stainless Steel - Pack of 100The ACA-TW series tie wraps cable ties is designed to secure linear heat sensor cable to the LHD brackets and clips. The tie wraps are available in various temperature ratings for matching or surpassing the temperature specifications of the selected LHD sensor cable.UV stabilised and stainless steel variants are suitable for outdoor applications whilst stainless steel variants additionally allow for the installation of very high temperature digital cable.A tool ACA-TWT is available for the stainless steel tie wrap installation.Key FeaturesEasy installation of linear heat cableFor use with LHD brackets and clipsIndoor and outdoor applicationsAvailable in stainless steelPack of 100

GBP 156.90

1

Vimpex Signaline SL-FXT Nylon Fixing Clip Pack of 100

Vimpex Signaline SL-FXT Nylon Fixing Clip Pack of 100A Polypropylene plastic moulding with a slot into which the Signaline linear heat detector cableis located. For extra security a tie wrap may be used in a figure of 8 arrangement to prevent the cable from being pulled from the clip. The fixing screw and tie wrap are not included.

GBP 111.77

1

Ziton ACA-BL05-100 quotLquot Bracket 50mm 2quot Zintec cw Silicon Sleeve - Pack of 100

Ziton ACA-BL05-100 L Bracket 50mm 2 Zintec cw Silicon Sleeve - Pack of 100The ACA-BL series L-brackets is designed to support linear heat cable above the risk area e.g. the top run of a cable tray. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.InstallationThe ACA-BL may be fitted to the cable tray and secured in place using a suitable bolt and nut at one end. The hole at the other end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. The L-bracket allows support for the sensor cable at the selected distance away from the detection area.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on cable traysAvailable in zintecPack of 100

GBP 167.51

1

Ziton ACA-BL20-025 quotLquot Bracket 200mm 7.9quot Zintec cw Silicon Sleeve - Pack of 25

Ziton ACA-BL20-025 L Bracket 200mm 7.9 Zintec cw Silicon Sleeve - Pack of 25The ACA-BL series L-brackets is designed to support linear heat cable above the risk area e.g. the top run of a cable tray. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.The ACA-BL may be fitted to the cable tray and secured in place using a suitable bolt and nut at one end. The hole at the other end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. The L-bracket allows support for the sensor cable at the selected distance away from the detection area.Key FeaturesEasy installation of linear heat cableFor use on cable traysAvailable in zintecPack of 25

GBP 149.32

1

Ziton ACA-BI20-025 Bracket quotIquot - 200mm 7.9quot Zintec cw Silicon sleeve - Pack of 25

Ziton ACA-BI20-025 Bracket I - 200mm 7.9 Zintec cw Silicon sleeve - Pack of 25The ACA-BI series I-brackets extension pieces is designed to extend the positioning of linear heat cable installed on 7-brackets and edge clips. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.The ACA-BI may be fitted to the bracket or clip and secured in place using a suitable bolt and nut at one end. The hole at the other end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. The extension piece allows support for the sensor cable an additional approx. 200mm away from the end of the bracket or clip.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on existing brackets and clips

GBP 113.51

1

Ziton ACA-B706-025 Alarmline 7 Bracket - Pack of 25

Ziton ACA-B706-025 Alarmline 7 Bracket - Pack of 25The ACA-B706 series 7-bracket pipe clip is designed to utilise existing pipework running through the protected area as a fixture for the liner heat detection cable. The ACA-B706 is designed to fit any pipe diameter. A silicon protection sleeve is supplied with the unit to protect the linear heat cable when fastened to the bracket.InstallationThe ACA-B706 should be fitted to the underside of the pipe and secured in place using suitable cable ties or strapping. The hole in the end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. Alternatively an I-bracket distance piece may be connected to the 7-bracket to extend the position of the sensor cable. Without an extension the 7-bracket pipe clip supports the sensor cable approx. 60mm below the pipe.Key FeaturesEasy installation of linear heat cableFor use on existing pipes in the areaAvailable in zintecPack of 25

GBP 113.53

1

Ziton ACA-CE02-025 quotEdgequot Clip Spring Steel 2-3mm 116quot - Pack of 25

Ziton ACA-CE02-025 Edge Clip Spring Steel 2-3mm 116The ACA-CE series Edge clip is designed to secure linear heat sensor cable to metal structures such as girders steel sections angle bars floating roof storage tank rim seals foam dams etc. It is available to mount on steelwork of differing thickness and provides a stand-off for the sensor cable ensuring rapid response.InstallationA fixing hole in the clip allows the securing of the sensor cable. The sensor cable should be secured to the clip with a silicone sleeve ACA-RS and tie wrap ACA-TW of suitable rating.The fixing hole can also allow the fixing of a distance piece I-Bracket to extend the position of the sensor cable.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on metal structures like girders steel sections angle bars floating roof storage tank rim seals foam dams etc.Excellent resistance to corrosion and heatAvailable in spring steelPack of 25

GBP 96.14

1

Vimpex Signaline SL-FXK Nylon Fixing Clip Pack of 100

Vimpex Signaline SL-FXK Nylon Fixing Clip Pack of 100The Signaline K clip offers installers significant improvements over traditional fixing methods of linear heat detectors. A 6mm dia. knock in spigot means you simply drill and fix. Meaning no wall plug and screw necessary resulting in reduced cost and reduced installation time. It is around 50 quicker than conventional methodsKey FeaturesPack of 100Dimensions 14 x 13 x 47mmMounting Wall or ceilingMaterial Polypropylene homopolymerColour Translucent

GBP 88.96

1

Fireclass 516.016.237FC ProReact 170 Degree C Indoor Tie Wrap - Pack of 100

Fireclass 516.016.237FC ProReact 170 Degree C Indoor Tie Wrap - Pack of 100516.016.237FC is a pack of ProReact 170 Degree C Indoor Tie Wraps.Installation standards such as BS5839 part 1 specify non-combustible cable supports and this requirement extends to linear heat sensor cable. To satisfy this requirement the ProReact Analogue Heat Detector range includes a range of fixings in either Zintec or Stainless Steel and compatible cable ties.Key FeaturesPack of 100Suitable for indoor use

GBP 164.60

1

Ziton ACA-B706SS-025 Alarmline 7 Bracket Stainless Steel - Pack of 25

Ziton ACA-B706SS-025 Alarmline 7 Bracket Stainless Steel - Pack of 25The ACA-B706 series 7-bracket pipe clip is designed to utilise existing pipework running through the protected area as a fixture for the liner heat detection cable. The ACA-B706 is designed to fit any pipe diameter. A silicon protection sleeve is supplied with the unit to protect the linear heat cable when fastened to the bracket.InstallationThe ACA-B706 should be fitted to the underside of the pipe and secured in place using suitable cable ties or strapping. The hole in the end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. Alternatively an I-bracket distance piece may be connected to the 7-bracket to extend the position of the sensor cable. Without an extension the 7-bracket pipe clip supports the sensor cable approx. 60mm below the pipe.Key FeaturesEasy installation of linear heat cableFor use on existing pipes in the areaAvailable in zintecPack of 25

GBP 157.99

1

Fireclass 516.016.221FC ProReact Standard L Clip - 50mm - Zintec Pack of 100

Fireclass 516.016.221FC ProReact Standard L Clip - 50mm - Zintec Pack of 100The 516.016.221FC is a pack of 100 Standard L Clips. The clips are made from a Zintec material.Installation standards such as BS5839 part 1 specify non-combustible cable supports and this requirement extends to linear heat sensor cable. To satisfy this requirement the ProReact Analogue Heat Detector range includes a range of fixings in either Zintec or Stainless Steel and compatible cable ties.Key FeaturesMaterial ZintecSize 50mmPack of 100

GBP 103.20

1

Fireclass 516.016.225FC ProReact Clip Extension Zintec

Fireclass 516.016.225FC ProReact Clip Extension ZintecThe 516.016.225FC is a Clip Extension which has been designed for use with other clips where required. This clip is part of the ProReact range.Installation standards such as BS5839 part 1 specify non-combustible cable supports and this requirement extends to linear heat sensor cable. To satisfy this requirement the ProReact Analogue Heat Detector range includes a range of fixings in either Zintec or Stainless Steel and compatible cable ties.Key FeaturesMaterial Zintec

GBP 127.48

1

Fireclass 516.016.220FC ProReact Dual Height L Clip - Zintec Pack of 100

Fireclass 516.016.220FC ProReact Dual Height L Clip - Zintec Pack of 100The 516.016.220FC is a pack of 100 ProReact Dual Height L Clips made from a Zintec material.Installation standards such as BS5839 part 1 specify non-combustible cable supports and this requirement extends to linear heat sensor cable. To satisfy this requirement the ProReact Analogue Heat Detector range includes a range of fixings in either Zintec or Stainless Steel and compatible cable ties.Key FeaturesPack of 100Material Zintec

GBP 110.40

1

Hochiki LAW-10 LEAKalarm Water Detection Cable 10 m

Hochiki LAW-10 LEAKalarm Water Detection Cable 10 mLEAKalarm offers both linear and point water leak detection solutions.Linear leak detection is achieved through the installation of this very responsive sensing cable designed to be fixed under false floors in ceiling voids and other enclosed spaces.Available in lengths of 5m and 10m the cables can be connected by the locking plug and socket system to cover large areas.An EOL device is added to the end of each cable run and cables are connected to LEAKalarm modules that are in turn connected to the LEAKalarm panel loops.Key FeaturesSimple connection and terminationConsistent sensitivityAesthetically attractive

GBP 109.49

1

Notifier Fixed Temperature 78 Deg. Heat Detector - NFX-TFIX78-IV - Ivory

Notifier Fixed Temperature 78 Deg. Heat Detector - NFX-TFIX78-IV - IvoryThe Opal NFXI-TFIX58 NFXI-TFIX78 are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58C Class A1S to 78C Class BS.The Opal NFXI-TDIFF uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10Cminute typical or if the temperature exceeds a threshold of 58C Response Class A1R. Notifiers Opal protocol allows it to be software configured to be either a fixed 58C a fixed 78C unit or a 58C with rate of rise device. For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers.The sensing elements of all three heat sensors are panel controllable through the Opal Protocol so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting. The detectors have built in short circuit isolation and two integral tri-colour LEDs that provide 360 local visual indication of the device status. The LEDs are programmable with static or blinking red amber and green status indications available.Key Features Built in short circuit isolationNew advanced Opal protocol allows mapping of the loop for precise fault location using isolatorsTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to complement modern buildings100 mechanical and electrical backwards compatibilityBase designed to ease installation and wiring

GBP 97.34

1

Notifier NFX-TFIX58-IV Fixed Temperature 58 Deg. Heat Detector - Ivory

Notifier NFX-TFIX58-IV Fixed Temperature 58 Deg. Heat Detector - IvoryThe Opal NFXI-TFIX58 NFXI-TFIX78 are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58C Class A1S to 78C Class BS.The Opal NFXI-TDIFF uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10Cminute typical or if the temperature exceeds a threshold of 58C Response Class A1R. Notifiers Opal protocol allows it to be software configured to be either a fixed 58C a fixed 78C unit or a 58C with rate of rise device.For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers. The sensing elements of all three heat sensors are panel controllable through the Opal Protocol so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting. The detectors have built in short circuit isolation and two integral tri-colour LEDs that provide 360 local visual indication of the device status. The LEDs are programmable with static or blinking red amber and green status indications available.Key FeaturesBuilt in short circuit isolationNew advanced Opal protocol allows mapping of the loop for precise fault location using isolatorsTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to complement modern buildings100 mechanical and electrical backwards compatibilityBase designed to ease installation and wiring

GBP 97.34

1

Notifier NFX-TDIFF-IV A1R Rate Of Rise amp Fixed Heat Detector - Ivory

Notifier NFX-TDIFF-IV A1R Rate Of Rise Fixed Heat Detector - IvoryThe Opal NFXI-TFIX58 NFXI-TFIX78 are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58C Class A1S to 78C Class BS.The Opal NFXI-TDIFF uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10Cminute typical or if the temperature exceeds a threshold of 58C Response Class A1R. Notifiers Opal protocol allows it to be software configured to be either a fixed 58C a fixed 78C unit or a 58C with rate of rise device. For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers.The sensing elements of all three heat sensors are panel controllable through the Opal Protocol so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting. The detectors have built in short circuit isolation and two integral tri-colour LEDs that provide 360 local visual indication of the device status. The LEDs are programmable with static or blinking red amber and green status indications available.Key Features Built in short circuit isolationNew advanced Opal protocol allows mapping of the loop for precise fault location using isolatorsTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to complement modern buildings100 mechanical and electrical backwards compatibilityBase designed to ease installation and wiring

GBP 94.10

1

Ziton ACA-CE02-025KIT LHD Cable Accessory - Clip quotEdgequot 2-3mm 116quot w Sleeve 25 Pack

Ziton ACA-CE02-025KIT LHD Cable Accessory - Clip Edge 2-3mm 116 w Sleeve 25 PackThe ACA-CE series Edge clip is designed to secure linear heat sensor cable to metal structures such as girders steel sections angle bars floating roof storage tank rim seals foam dams etc. It is available to mount on steelwork of differing thickness and provides a stand-off for the sensor cable ensuring rapid response.InstallationA fixing hole in the clip allows the securing of the sensor cable. The sensor cable should be secured to the clip with a silicone sleeve ACA-RS and tie wrap ACA-TW of suitable rating.The fixing hole can also allow the fixing of a distance piece I-Bracket to extend the position of the sensor cable.Recommended spacing 1m

GBP 93.88

1

C-Tec ECU723 SigTEL InterfaceNetwork Communication Card

C-Tec ECU723 SigTEL InterfaceNetwork Communication CardECU-224 interfacenetwork card. Allows an ECU-224 desk controller to be connected to an ECU-4 8 or 16. Can also act as a network card if networking is required. NOT compatible with ECU-8NT Controllers.The ECU723 transmits speech via a single wiring loop and digital data via two linear RS485 networks. The network should be connected using 4 x 2-core 1.5 mm2 enhanced fire-rated cable. Max. length of all networks is 1 km.An optional system expansion device.Allows anECU-224 desk controller to be connected to an ECU-4 8or16 SigTEL controller to simplify call handling on larger SigTEL applications.Mounts inside an ECU-4 8 or 16 can alsobe used tonetworkthe ECU-4 8 or 16 to another controller if required.Not compatible with ECU-8NT controllers.See schematicfull instructions for further details

GBP 108.77

1

DIGITAL MARKETING

Brand

Merchant

Price (EUR)

Vimpex SL-HDP-EOL Signaline HD EOL - Programmable Linear Heat Cable End of Line

Vimpex SL-HDP-JB Signaline HD JB Programmable Linear Heat Cable Junction Box

Vimpex Signaline SL-FXA Nylon Fixing Clip Pack of 100

Ziton ACA-JBW Junction Box IP6566 with Cable Glands amp Terminals

Ziton ACA-CP-100 quotPquot Clip cw Silicon Sleeve - Pack of 100

Ziton ACA-TW17-025 Tie Wrap PA66 170C 338F - Pack of 25

Ziton ACA-TWSS-100 Tie Wrap Stainless Steel - Pack of 100

Vimpex Signaline SL-FXT Nylon Fixing Clip Pack of 100

Ziton ACA-BL05-100 quotLquot Bracket 50mm 2quot Zintec cw Silicon Sleeve - Pack of 100

Ziton ACA-BL20-025 quotLquot Bracket 200mm 7.9quot Zintec cw Silicon Sleeve - Pack of 25

Ziton ACA-BI20-025 Bracket quotIquot - 200mm 7.9quot Zintec cw Silicon sleeve - Pack of 25

Ziton ACA-B706-025 Alarmline 7 Bracket - Pack of 25

Ziton ACA-CE02-025 quotEdgequot Clip Spring Steel 2-3mm 116quot - Pack of 25

Vimpex Signaline SL-FXK Nylon Fixing Clip Pack of 100

Fireclass 516.016.237FC ProReact 170 Degree C Indoor Tie Wrap - Pack of 100

Ziton ACA-B706SS-025 Alarmline 7 Bracket Stainless Steel - Pack of 25

Fireclass 516.016.221FC ProReact Standard L Clip - 50mm - Zintec Pack of 100

Fireclass 516.016.225FC ProReact Clip Extension Zintec

Fireclass 516.016.220FC ProReact Dual Height L Clip - Zintec Pack of 100

Hochiki LAW-10 LEAKalarm Water Detection Cable 10 m

Notifier Fixed Temperature 78 Deg. Heat Detector - NFX-TFIX78-IV - Ivory

Notifier NFX-TFIX58-IV Fixed Temperature 58 Deg. Heat Detector - Ivory

Notifier NFX-TDIFF-IV A1R Rate Of Rise amp Fixed Heat Detector - Ivory

Ziton ACA-CE02-025KIT LHD Cable Accessory - Clip quotEdgequot 2-3mm 116quot w Sleeve 25 Pack

C-Tec ECU723 SigTEL InterfaceNetwork Communication Card

Powered by Cobiro