78 results (0,43513 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Fireclass 517.001.248FC DX070 Enclosure with 70mm DIN Rail

Fireclass 517.001.248FC DX070 Enclosure with 70mm DIN Rail

Fireclass 517.001.248FC DX070 Enclosure with 70mm DIN RailThe DX Series enclosures will house the EXI800 20 mm pitch Pepperl Fuchs KFDO-CS-Ex1.54 Galvanic Isolator 20 mm pitch and the MTL5525 I.S. Sounder Driver 16.2 mm pitch. The units are DIN rail mounted with 70 mm of rail which is supplied with the DX070. The enclosures are usually selected on the number of units they will accommodate.Key Features70mm DIN rail suppliedGlass reinforced polyester baseDust-tight and water-jet proof to IEC529IP6Weight 0.8kgPermitted location Safe non-hazardous area

GBP 148.21
1

Apollo DIN-Rail Interface Enclosure 10 units 29600-240

Apollo DIN-Rail Interface Enclosure 10 units 29600-240

Apollo DIN-Rail Interface Enclosure 10 units 29600-240DIN-Rail Interface Enclosures are available in two sizes and can be used for housing intrinsically safe IS barriers or DIN-Rail mounted interfaces. A multi-purpose label that features a section for use with IS systems is supplied. For non-IS systems the part referring to IS can simply be removed.ApplicationThe enclosures can be used for housing intrinsically safe I.S. barriers XP95 or Soteria DIN-rail mounted interfaces. The IP67 rated enclosures have a frosted polycarbonate lid through which LEDs can be viewed. A multi-purpose label that features a section for use with I.S. systems is supplied. For non-I.S. systems the part referring to I.S. can simply be removed.Key FeaturesAllows multiple interfaces to be housed togetherIP67 rated

GBP 114.18
1

Carrier N-IO-MBX-2 Din Rail Module Box White

Carrier N-IO-MBX-2 Din Rail Module Box White

Carrier N-IO-MBX-2 Din Rail Module Box WhiteThe N-IO-MBX-2 is a surface mount enclosure designed for housing modules requiring a DIN rail mount. Its main function is to facilitate the easy installation and protection of these devices whist keeping cabling accessible secure and neat in the provided cable trunking inside the enclosure.Key FeaturesEasy installations of DIN rail mount modules on pre-fitted DIN railsPre-installed cable trunking for neat cablingHouse multiple DIN units in one location in an aesthetic enclosure

GBP 146.78
1

Carrier N-IO-MBX-1 Din Rail Module Box White

Carrier N-IO-MBX-1 Din Rail Module Box White

Carrier N-IO-MBX-1 Din Rail Module Box WhiteThe N-IO-MBX-1 is a surface mount enclosure designed for housing modules requiring a DIN rail mount. Its main function is to facilitate the easy installation and protection of these devices whist keeping cabling accessible secure and neat in the provided cable trunking inside the enclosure.Key FeaturesEasy installations of DIN rail mount modules on pre-fitted DIN railsPre-installed cable trunking for neat cablingHouse multiple DIN units in one location in an aesthetic enclosure

GBP 104.84
1

Apollo DIN Rail Interface Enclosure 29600-239

Apollo DIN Rail Interface Enclosure 29600-239

Apollo DIN Rail Interface Enclosure - 29600-239The enclosures can be used for housing intrinsically safe IS barriers or DIN-rail mounted interfaces. The enclosures have a frosted polycarbonate lid through which LEDs can be viewed. A multi-purpose label that features a section for use with IS systems is supplied. For non-IS systems the part referring to IS can simply be removed.When using these enclosures with intrinsically safe systems it is important that segregation be provided between the IS and non-IS circuits. A distance of at least 50mm must be preserved between live conducting parts of IS and other circuits. If the enclosure is used as part of an IS circuit then it must always be installed inside the safe area. Never install these enclosures in the hazardous area.The smaller enclosure is suitable for one analogue addressable or two conventional IS circuits or up to four DIN-rail interfaces.Key FeaturesAllows multiple Interfaces to be housed togetherIP67 Rated

GBP 102.76
1

Apollo Marine DIN-Rail Sounder Controller 8 Amperes 55000-181MAR

Apollo Marine DIN-Rail Sounder Controller 8 Amperes 55000-181MAR

Apollo Marine DIN-Rail Sounder Controller 8 Amperes 55000-181MARThe Marine DIN-Rail Sounder Controller 8 Amperes is used to control the operation of a zone of externally powered sounders and report their status to the fire control panel.The device is loop powered and controlled by the fire control panel using the output bits in the communication protocol. The unit is polarity sensitive. This unit needs to be installed in a suitable enclosure Part No. 29600-239240 or equivalent and secured using the end stops.Key FeaturesEnables sounders to be operated continuously or to be pulsed one second on one second offMay be synchronised when in pulsed operationExternal supply monitoringWill accept a load of 8 Amperes

GBP 119.31
1

Aritech II952ND Intelligent Switch Monitor DIN Rail Mount Apollo equivalent SA4700-300

Aritech II952ND Intelligent Switch Monitor DIN Rail Mount Apollo equivalent SA4700-300

Aritech II952ND Intelligent Switch Monitor DIN Rail Mount Apollo equivalent SA4700-300II952ND Apollo Switch Monitor Unit is the new DIN-Rail switch monitor unit designed to monitor the state of one or more single pole volt-free contacts connected on a single pair of cables to report the status. It has a selectable status reporting delay making it suitable for monitoring flow switches.Key FeaturesImproved design for ease of wiring meaning faster installationLoop poweredSupervise one or more single pole volt-free contacts connected on a single pair of cablesLocal LEDs signalling IO and fault conditionsIsolators within each device

GBP 128.20
1

Elmdene POE-ULTRAPOD-MOD PoE Ultra-Pod Module DIN Rail Mountable Unboxed

Elmdene POE-ULTRAPOD-MOD PoE Ultra-Pod Module DIN Rail Mountable Unboxed

Elmdene POE-ULTRAPOD-MOD PoE Ultra-Pod Module DIN Rail Mountable UnboxedThe Elmdene PoE UltraPod is a unique PoE powered device that can charge up to a 12V 17Ah battery whilst continuing to provide a 13.8V dc output of up to 3A.If the PoE power being provided to the input fails the battery seamlessly takes over continuing to provide the 13.8V dc voltage to the device allowing data to continue to flow.Available as a DIN rail mountable module or a boxed unit. It can be used in a variety of PoE applications such as CCTV or Access control.Installer friendly RJ45 connections are provided to off er a simple plug and play solution without the requirement of terminating Cat5 connections.Key FeaturesProvides up to 3A to the device with an additional 0.5A available for battery charging PoE requiredOffers battery back-up on loss of input PoE powerDIN rail or screw mountable moduleBoxed unit has space for 17Ah batteryBoxed unit has fixing points for commonly used access control boardsProvides remote fault monitoring outputsData pass through for IP connections 10100Mbps

GBP 113.45
1

Aritech IO950ND Intelligent IO Unit with Isolator DIN Rail Mount Apollo equivalent SA4700-302

Aritech IO950ND Intelligent IO Unit with Isolator DIN Rail Mount Apollo equivalent SA4700-302

Aritech IO950ND Intelligent IO Unit with Isolator DIN Rail Mount Apollo equivalent SA4700-302IO950ND is the new DIN-Rail inputoutput unit which provides supervision of one or more normally open contacts connected to a single pair of cables and a set of changeover relay output contacts.Ease of InstallationImproved design for ease of wiring meaning faster installation unit can be fitted to back-box before wiring is connected. Colour coded terminal blocks for easier identification green for loop wiring yellow for mains wiring grey for inputs and low voltage relays.Key FeaturesImproved design for ease of wiring meaning faster installationLoop poweredSupervise one or more NO switches on a single cable pairLocal LEDs signalling IO and fault conditionsIsolators within each device

GBP 154.01
1

Apollo XP95 DIN-Rail Sounder Controller 5 Amperes 55000-182APO

Apollo XP95 DIN-Rail Sounder Controller 5 Amperes 55000-182APO

Please note This product currently has an extended leadtime due to a component shortage. Please contact us for further information.Apollo XP95 DIN-Rail Sounder Controller 5 Amperes 55000-182APOThe DIN-Rail Sounder Controller 5 Amperes is used to control the operation of a zone of externally powered sounders and report their status to the control panel.Electrical DescriptionThe DIN-rail Sounder Controller is loop powered and operates at 1728V DC. It requires a local power supply of 1235V DC to power the external load which may be up to 5A. A polarising diode is required with each alarm device as sounders are operated by voltage reversal provided by a double-pole change-over relay. The sounder circuit is protected by a fuse rated at 5A quick acting.OperationThe Sounder Controller allows sounders to be operated continuously or be pulsed 1 second on 1 second off. Sounders may be operated individually or in groups and whichever address mode has been applied may be synchronised when in pulsed operation. An opto-coupled input is provided to monitor the state of the external power supply. In normal operation the Sounder Controller returns a pre-set analogue value of 16 but in the event of an open or short-circuit fault or of a fault in the external power supply the unit returns a pre-set analogue value of 4.Key FeaturesAllows sounders to be operated continuously or be pulsed 1 second on 1 second offMay be synchronised with loop soundersAn opto-coupled input is provided to monitor the state of the external power supplyFeatures group addressingWill accept a load of up to 5A

GBP 97.03
1

Advanced MXP-052-DIN Mimic Driven 10-Way Relay Output Card in Din-Rail Carrier

Advanced MXP-052-DIN Mimic Driven 10-Way Relay Output Card in Din-Rail Carrier

Advanced MXP-052-DIN Mimic Driven 10-Way Relay Output Card in Din-Rail CarrierThe Peripheral Relay Card provides 10 30V DC 1A programmable relay outputs.The Peripheral Relay Card connects directly to any of the DIL connectors of either the Network Mimic 100 LED Output Card or the Multi way InputOutput Card unit via the supplied ribbon cable.Each output follows the cause-and-effect programming of the mimic unit output.This can be either a simple zone output or can be an individually programmed output group rule utilising the full range of features of the MxPro5 Dynamic zoning facilities.Key FeaturesTen change-over contacts outputs at 30Vdc 1ADIN rail fixingSeparate isolate input disables all outputsSeparate isolate indication outputFast response

GBP 149.43
1

Apollo Marine DIN-Rail Zone Monitor 55000-773MAR

Apollo Marine DIN-Rail Zone Monitor 55000-773MAR

Apollo Marine DIN-Rail Zone Monitor 55000-773MARThe Marine DINRail Zone Monitor powers and controls the operation of a zone of up to 20 conventional fire detectors from a loop of XP95 addressable detectors and ancillary devices.OperationThis unit needs to be installed in a suitable enclosure and secured using end stops part no 27447-528 or equivalent. The Marine DINRail zone monitor is factory pre-set to return an analogue value of 16 when all detectors on the zone are in the quiescent state and 64 when a detector changes to the alarm state.The unit latches in the alarm state. A 5.1K end-of-line resistor is used to monitor cables for open and short-circuit faults. Alternatively an active end-of-line monitor may be used in conjunction with diode bases and a capacitor of up to 50F fitted at the unit wiring terminals. In either case an analogue value of 4 is transmitted during open or short-circuit faults.The Marine DINRail zone monitor is fitted with a bi-directional short-circuit isolator and will be unaffected by loop short-circuits on either loop input or output.Key FeaturesLoop-poweredVisible short-circuitLED Built in isolator

GBP 112.91
1

Aritech ACL800FL-CONV-W ACL800 Converter - RS485 to TCPIP - Fitted In DIN-RAIL Housing

Aritech ACL800FL-CONV-W ACL800 Converter - RS485 to TCPIP - Fitted In DIN-RAIL Housing

Aritech ACL800FL-CONV-W ACL800 Converter - RS485 to TCPIP - Fitted In DIN-RAIL HousingThe ACL800FL-CONV-W is highly integrated serial to Ethernet Converter that enables you to connect any Carrier biometric reader over a local LAN network or over the Internet to your computer. Configuration of the IP address Dynamic DNS TCPUDP ports can be done from browser or from the ACL800 BioManager software. The software is capable to automatically search IP addresses of the converters as well as the serial numbers of the biometric readers. The device is already pre-set for use with the Biometric Readers.The ACL800 Series consists of all the required elements to establish a range with a state-of-the-art design. This new range consisting of readers stand-alone keypad readers and Request-To-Exit touch sensitive push buttons provides all you need for a coherent look-and feel attractive project. The product line has now expanded new biometric readers.The readers are compatible with the TruPortal 125 KHz credential range and other industry standards like MIFARE Classic - Plus Ultralight and - DESFire EV1. These technologies use the CSN Card Serial Number or UID Unique Identifier as credential identifier. The wiegand output 32 or 56 bit is automatic according to the card type and ensures uniqueness of the MIFARE CSN with 4 and 7 Byte UID. The Proximity card type can be selected through DIP switches in HID only HID and EM HID and Casi Casi only or EM only and Wiegand outputs automatically according to the card type.The ACL800 reader range is compatible with the TruPortal learn-in reader TP-RDR-LRN for learning-in credentials in access control panels like TruPortal. This compatibility is provided for both the 125 KHz and the 13.56 MHz credentials while using the full wiegand format length in the management software also with other third-party packages. There are different mounting possibilities either flush mounted within the electrical wall sockets or surface mounted with a stylish small modern-looking molded design.Key FeaturesIndoorDIN rail mount or wall mountNetwork interface and a RS485 interfaceFitted in a DIN rail housingDedicated IP orand MAC addressVisual LED signalization for TCPUDP packetsDHCP clientDDNS supportFinds portals by ACL800 BioManager

GBP 109.38
1

Rutland ITS.11204.3.5.SE EN 2-4 Concealed Cam Action Door Closer cw Micro Rail amp Connector Bar - Silver

Rutland ITS.11204.3.5.SE EN 2-4 Concealed Cam Action Door Closer cw Micro Rail amp Connector Bar - Silver

Rutland ITS.11204.3.5.SE EN 2-4 Concealed Cam Action Door Closer cw Micro Rail Connector Bar - SilverRutland ITS.11204 cam action door closer is renowned for its slimline mechanism 32mm which has been fire tested in a 44mm fire door.Key FeaturesVariable power adjustable EN2-4 does doors up to 80kg 1100mm wideFits in a 44mm fire door been tested in various door slabs e.g. Falcon Strebord Vaicaima Halspan etcFire tested to EN1634-1Assists BS8300 for DocM contracts helping to assist door sets with ease of openingComes with connector bar

GBP 126.00
1

Rutland ITS.11204.3.5.PVD EN 2-4 Concealed Cam Action Door Closer cw Micro Rail amp Connector Bar - Polished Brass

Rutland ITS.11204.3.5.PVD EN 2-4 Concealed Cam Action Door Closer cw Micro Rail amp Connector Bar - Polished Brass

Rutland ITS.11204.3.5.PVD EN 2-4 Concealed Cam Action Door Closer cw Micro Rail Connector Bar - Polished BrassRutland ITS.11204 cam action door closer is renowned for its slimline mechanism 32mm which has been fire tested in a 44mm fire door.Key FeaturesVariable power adjustable EN2-4 does doors up to 80kg 1100mm wideFits in a 44mm fire door been tested in various door slabs e.g. Falcon Strebord Vaicaima Halspan etcFire tested to EN1634-1Assists BS8300 for DocM contracts helping to assist door sets with ease of openingComes with connector bar

GBP 130.99
1

Rutland ITS.11204.3.5.PNP EN 2-4 Concealed Cam Action Door Closer cw Micro Rail amp Connector Bar - Polished Nickel

Rutland ITS.11204.3.5.PNP EN 2-4 Concealed Cam Action Door Closer cw Micro Rail amp Connector Bar - Polished Nickel

Rutland ITS.11204.3.5.PNP EN 2-4 Concealed Cam Action Door Closer cw Micro Rail Connector Bar - Polished NickelRutland ITS.11204 cam action door closer is renowned for its slimline mechanism 32mm which has been fire tested in a 44mm fire door.Key FeaturesVariable power adjustable EN2-4 does doors up to 80kg 1100mm wideFits in a 44mm fire door been tested in various door slabs e.g. Falcon Strebord Vaicaima Halspan etcFire tested to EN1634-1Assists BS8300 for DocM contracts helping to assist door sets with ease of openingComes with connector bar

GBP 130.99
1

Rutland ITS.11204.3.5.SNP EN 2-4 Concealed Cam Action Door Closer cw Micro Rail amp Connector Bar - Satin Nickel Plate

Rutland ITS.11204.3.5.SNP EN 2-4 Concealed Cam Action Door Closer cw Micro Rail amp Connector Bar - Satin Nickel Plate

Rutland ITS.11204.3.5.SNP EN 2-4 Concealed Cam Action Door Closer cw Micro Rail Connector Bar - Satin Nickel PlateRutland ITS.11204 cam action door closer is renowned for its slimline mechanism 32mm which has been fire tested in a 44mm fire door.Key FeaturesVariable power adjustable EN2-4 does doors up to 80kg 1100mm wideFits in a 44mm fire door been tested in various door slabs e.g. Falcon Strebord Vaicaima Halspan etcFire tested to EN1634-1Assists BS8300 for DocM contracts helping to assist door sets with ease of openingComes with connector bar

GBP 130.99
1

Hochiki Dual Zone Monitor with SCI - marine approved CHQ-DZMMSCI

Hochiki Dual Zone Monitor with SCI - marine approved CHQ-DZMMSCI

Hochiki Dual Zone Monitor with SCI - marine approved CHQ-DZMMSCIA Dual Zone Module designed to allow up to 60 conventional detectors 30 per zone to be interfaced to Hochikis Analog Addressable system.Also available as a DIN Rail mountable version. Both models feature an integral short-circuit isolator.Key FeaturesSingle Loop AddressSupports Two Independent Zones of Conventional DetectorsBoth Zones Fully Monitored for ShortOpen CircuitsRequires an Auxiliary 24V dc SupplyDIN Rail Version AvailableBoth Models Feature an Integral Short Circuit Isolator

GBP 139.66
1

Vimpex Single Loop Sounder Controller DINT1

Vimpex Single Loop Sounder Controller DINT1

Vimpex Single Loop Sounder Controller DINT1The Vimpex Loop Sounder System is based around the DINT1 Loop Controller Module which is interfaced with a standard sounder circuit. Sounders are activated and monitored just like any other conventional sounder circuit. The small module is designed for DIN rail mounting within the PS18181-11m wall-mounted enclosure which is available from Vimpex.The sounder loop consists of a two core sounder loop which starts and finishes from the Loop Controller Module. The loop is fully monitored for short and open faults.Key FeaturesDesigned for DIN rail mounting

GBP 159.10
1

System Sensor M221EA Dual Input and Single Control Output Combination Module

System Sensor M221EA Dual Input and Single Control Output Combination Module

System Sensor M221EA Dual Input and Single Control Output Combination ModuleThe System Sensor M200 wired range of Input Output modules has been redesigned to address its microcontroller obsolescence and grant full backward-compatibility.The new M200 look and feel combine maximum reliability with top-end functionality. Their unique mechanical design allows each module to be mounted in either a common wall box on a DIN rail or its dedicated enclosure.Key FeaturesCommon mechanical platform for modules enclosureLow standby currentFACP reads module power voltageHigh Power Loop 48V readyBuilt-in short circuit isolatorsAddressability through rotary switchesTri-colour Light PipeImproved Light Pipe visibility on two sidesPlug-in field wiring terminalsIntegrated DIN rail bracketsLasered engraved label dataIP rate 30Intertek ApprovedPlease note This product requires the M200E-SMB for surface mounting or M200E-DIN for mounting to DIN rails.

GBP 128.75
1

Advanced MxPro 10 Way Mimic Relay Card - Mxp-052

Advanced MxPro 10 Way Mimic Relay Card - Mxp-052

Advanced MxPro 10 Way Mimic Relay Card - Mxp-052The Mxp-052 is a peripheral relay card providing ten 30V DC 1A programmable relay outputs. The Mxp-052 connects directly to any of the DIL connectors of either the Network Mimic Mxp-020-100 LED Output Card or the General IO controller Mxp-045 LED Output Card units via the supplied ribbon cable.Each output follows the cause and effect programming of the mimic unit output. This can be either a simple zone output or can be an individually programmed output group rule utilising the full range of features of the Mx-40005000 systems Dynamix zoning facilities.Key FeaturesTen change-over contact outputs rated at 30V DC 1A.Up to 200 individual relay outputs fully programmable per mimic excluding LEDsTen individually programmable relay outputs per unitDIN rail or screw fixing optionsSeparate isolate input disables all outputsSeparate isolate indication outputFast instant responseProduct CodesDescriptionMXP-052Mimic driven 10-way relay output cardMXP-052-DINMimic driven 10-way relay output card in din-rail carrier

GBP 129.16
1

Baldwin Boxall VIGIL2 Copper Network Connection BVRDCIF

Baldwin Boxall VIGIL2 Copper Network Connection BVRDCIF

Baldwin Boxall VIGIL2 Copper Network Connection BVRDCIFThe BVRDCIF is a DIN rail mounted connection to copper network sections. Two BVRDCIF required per BVRDNET2M4. CAT5 patch lead connection to BVRDNET2M4 clockwise or anti-clockwise connector.Key FeaturesLED to indicate valid data reception.Screw terminals for two transmit conductors and two receive conductors preferably twisted pair.Screw terminal for ground.Typical maximum distance of 300m at slow speed and 200m at fast speed. Greater distances possible with some cable types.

GBP 88.00
1

C-Tec MTL7787 HOC Zener Barrier

C-Tec MTL7787 HOC Zener Barrier

C-Tec MTL7787 HOC Zener BarrierSince its introduction in 1984 the MTL700 range has established itself as the worldwide standard for safety barriers. Known for its quality and reliability the MTL700 range is widely used in applications all over the world.The MTL7700 range follows closely in the footsteps of the MTL700 but as a DIN rail mounting barrier providing quick and easy installation without the need for special hardware.Removable terminals are used for ease of installation maintenance and for providing a loop disconnect by simply unplugging the terminals from the side of the module. Wire entry is also angled to assist wiring within limited space enclosures.MTL7700 barriers clamp simply and securely onto standard T-section DIN rail simultaneously making a reliable IS earth connection.Key FeaturesRemovable terminalsBussed power feed to other modulesRelay and solid state switch modulesDual channel variants 6.3mm per channelProximity detector inputsElectronic fusingDirect replacement for MTL700 range barrierCompatible terminal numbering and safety descriptionsPlease note This image is for illustrative purposes only. You will receive 1 xC-Tec MTL7787 HOC Zener Barrier.

GBP 119.88
1