341 results (0,43324 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Vesda Xtralis VSP-004 VLS Display Module

Vesda Xtralis VSP-004 VLS Display Module

Vesda Xtralis VSP-004 VLS Display ModuleThe VSP-004 Display Module for a Vesda Laser Scanner.Display modules provide real-time indication of the status of a VESDAdetector. They have a 20-segment vertical bar graph display a 2 digit numericdisplay an audible sounder clear alarm and fault indicators. They also have 4push button keys to control the detector and the mode of the display.The Display Module can be mounted into a detector unit a remote mountingbox or a 19inch sub rack. Several displays can be configured to displayinformation from a single detector in multiple locations.

GBP 768.66
1

Patol 5410 Infrared Heat Sensor 230vAC

Patol 5410 Infrared Heat Sensor 230vAC

Patol 5410 Infrared Heat Sensor 230vACType 5410 Infra-red sensors are part of the Patol 5000 Series of equipment which is specifically designed for the protection of establishments and systems where a movement of materials with a potential fire hazard is a routine occurrence.The 5000 system employs enhanced Infra-red monitoring technology that enables the detection of hot fire initiating materials whilst they are being transported and before they have reached an ember visible ignition or flame condition. The 5410 detectors have many applications within industries such as Power Generation Coal Mining Process Plant Road Transportation and Rail Networks and has been specifically designed to both meet the rigors of these environments and to provide the reliability required.

GBP 5241.60
1

Patol 5410 Infrared Heat Sensor 115vAC

Patol 5410 Infrared Heat Sensor 115vAC

Patol 5410 Infrared Heat Sensor 115vACType 5410 Infra-red sensors are part of the Patol 5000 Series of equipment which is specifically designed for the protection of establishments and systems where a movement of materials with a potential fire hazard is a routine occurrence.The 5000 system employs enhanced Infra-red monitoring technology that enables the detection of hot fire initiating materials whilst they are being transported and before they have reached an ember visible ignition or flame condition. The 5410 detectors have many applications within industries such as Power Generation Coal Mining Process Plant Road Transportation and Rail Networks and has been specifically designed to both meet the rigors of these environments and to provide the reliability required.

GBP 5241.60
1

Gent S4-34440-12 Mains Powered Interface 2.0A 12.0Ah Standby

Gent S4-34440-12 Mains Powered Interface 2.0A 12.0Ah Standby

Gent S4-34440-12 Mains Powered Interface 2.0A 12.0Ah Standby including BatteriesThe S4 Mains powered interface units Part Nos S4-34440-02 and S4-34440-12 are EN54-4 compliant battery backed power supplies that can be directly connected to the Vigilon and Nano loop and also have highly flexible interfacing capability.The 4 channels can be individually configured to provide Output and Input interface in various configuration modes to control external equipment and receive input to allow the fire system to make decisions and take actions. It is now possible to have combined inputs and outputs giving a total of 8 external circuits connected e.g. 4 sector outputs and 4 confirmation inputs.The units have room to accommodate optional modules on to DIN rails. It has a configurable auxiliary power output that is derived from its self-contained mains power supply unit which is battery backed to continue to deliver power in the event of mains supply failure.Key Features4 channel interface integrates with EN54part 4 power supplyA cost effective solution as all elements are included within the enclosure therefore reducing your installation and maintenance costsFour channels can be individually programmed to provide various configuration modes to control external equipment

GBP 757.56
1

Gent Mains Powered 4 Channel Interface - S4-34440-02

Gent Mains Powered 4 Channel Interface - S4-34440-02

Gent Mains Powered 4 Channel Interface - S4-34440-02 The S4 Mains powered interface units Part Nos S4-34440-02 and S4-34440-12 are EN54-4 compliant battery backed power supplies that can be directly connected to the Vigilon and Nano loop and also have highly flexible interfacing capability.The 4 channels can be individually configured to provide Output and Input interface in various configuration modes to control external equipment and receive input to allow the fire system to make decisions and take actions. It is now possible to have combined inputs and outputs giving a total of 8 external circuits connected e.g. 4 sector outputs and 4 confirmation inputs.The units have room to accommodate optional modules on to DIN rails. It has a configurable auxiliary power output that is derived from its self-contained mains power supply unit which is battery backed to continue to deliver power in the event of mains supply failure.Key Features4 channel interface integrates with EN54part 4 power supplyA cost effective solution as all elements are included within the enclosure therefore reducing your installation and maintenance costsFour channels can be individually programmed to provide various configuration modes to control external equipment

GBP 605.54
1

Apollo XP95 Intrinsically Safe Red Manual Call Point MEDC Style 55000-961APO

Apollo XP95 Intrinsically Safe Red Manual Call Point MEDC Style 55000-961APO

Please note This product is currently on an extended lead time please contact us before placing your order.Apollo XP95 Intrinsically Safe Red Manual Call Point MEDC Style 55000-961APOXP95 IS Manual Call Point - MEDC Style for heavy-duty applications a robust manual call point based on a model by MEDC is available. This model is made of glass-reinforced polyester and may be ordered as a break-glass or push-button call point and in a variety of colours.Break-glass models may be supplied with or without a stainless-steel protective flap. MEDC-based break-glass units have two M20 cable entries on the bottom face of the back box. Push-button units have one M20 cable entry on the bottom face and one on the top face. Other cable entry configurations can be provided to special order.OperationXP95 IS manual call points have the same operating characteristics as the standard versions. They are available in two types of housing and in a number of versions. The standard call point is based on the KAC waterproof model and is a red break-glass call point part no 55000-940. This model is also available in other colours and a protective lift-up flap is available.Key FeaturesRobust designWaterproofReports an alarm in under 0.2 seconds

GBP 844.88
1

International Gas Detectors TOC-625-NHS Micro Gas Detection System

International Gas Detectors TOC-625-NHS Micro Gas Detection System

International Gas Detectors TOC-625-NHSMicro Gas Detection SystemThis is designed for small systems which house up to 8 devices with simple IO requirements.TheTOC-625 Micro Gas Detection System Controllerinterfaces with existing TOC-30A addressable gas detectors and has auto detect and set up features making deployment fast and easy for installers not used to gas detection systems.When detectors are discovered by the system alarm actions and levels are automatically set as detailed in the product literature.As with all IGD addressable gas detectors supplied detectors are pre-calibrated and store all their configuration on the detector heads making automatic setup after discovery fast and easy.The Oxygen sensors have an industry leading 5 year lifetime meaning clients have a future proof system with minimal upkeep cost.Key Features5 Year LifetimeMinimal upkeep costsEasy Installation Minimal Training Required

GBP 521.10
1

Apollo I.S. Conventional Triple IR Flame Detector 55000-063APO

Apollo I.S. Conventional Triple IR Flame Detector 55000-063APO

Apollo I.S. Conventional Triple IR Flame Detector 55000-063APOThe IS IR3 Flame Detector is designed for harsh environments in either indoor or outdoor applications. It is sensitive to low frequency flickering IR radiation emitted from flames during combustion.The sensor operates even through a layer of oil dust water vapour or ice. These detectors have been approved byBaseefa to standards EN50014 EN50020 and EN50284. The requirements of Directive 949EC the Atmosphere Explosives ATEX directive have also been met.Key Features ATEX IECEx certified II 1 GCENELECIEC Certified Ga Ex ia IIC T4Selectable output options Conventional two-wire 4-20mA Latching or Non-latching RelayContacts - FireFault Pre alarmClass 1 sensitivity to EN54-10 detects 0.1m2 fire at 25mHigh optical interference immunitySelectable response speedOptical self-testLow power consumptionIP65 ratedSupply voltage 14 to 30VdcOperating temperature -10C to 40C T4Operating temperature -10C to 55C

GBP 2233.04
1

Talentum Dual IR Flame Detector 16581

Talentum Dual IR Flame Detector 16581

Talentum Dual IR Flame Detector 16581These flame detectors give high immunity to false flame sources. They have internal self-test sources that check the detectors operation when remotely instructed. They can operate on a conventional 2-wire 14-28 Vdc fire systems or 4-20mA process control systems. Relay contacts are also available for Fire and Fault signals. The detectors operating modes can be user selected giving a choice of alarm currents response times latching or non-latching outputs and sensitivity. The detectors have a maximum ambient operating temperature of 55C.Key Features High immunity to false sources For applications with visible light present Detects invisible flames from fuels such as Hydrogen and other inorganic fuels Selectable response speed Optical self-test Low power consumption Approved to EN54-102002Applications Used On Churches Coal Handling Fume Cupboards Printing Spray Booths Textiles Waste Handling

GBP 1818.30
1

Klaxon EXD Beacon Amber 5W LED Lens 12-48v DC - TCB-0013

Klaxon EXD Beacon Amber 5W LED Lens 12-48v DC - TCB-0013

Klaxon EXD Beacon Amber 5W LED Lens 12-48v DC - TCB-0013The EXD Beacon range has been approved for use in potentially explosive atmospheres and very harsh environmental conditions. These beacons have a choice of two types of light source either Xenon strobe with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings.The design allows for termination inside the enclosure. The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments.Key FeaturesApproved by ATEX and CQST IMETRO and IECEX PendingATEX II 2G Exd IIC T4 - T6 incorporating IIA IIBZones 12 Zones 2122 PendingConforms to EN IEC 60079-0 EN IEC 60079-1 and EN54360 degree light output around the vertical axisDustproof Weatherproof

GBP 918.26
1

Klaxon EXD Beacon Red 10W LED Lens 100-240v AC - TCB-0016

Klaxon EXD Beacon Red 10W LED Lens 100-240v AC - TCB-0016

Klaxon EXD Beacon Red 10W LED Lens 100-240v AC - TCB-0016The EXD Beacon range has been approved for use in potentially explosive atmospheres and very harsh environmental conditions. These beacons have a choice of two types of light source either Xenon strobe with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings.The design allows for termination inside the enclosure. The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments.Key FeaturesApproved by ATEX and CQST IMETRO and IECEX PendingATEX II 2G Exd IIC T4 - T6 incorporating IIA IIBZones 12 Zones 2122 PendingConforms to EN IEC 60079-0 EN IEC 60079-1 and EN54360 degree light output around the vertical axisDustproof Weatherproof

GBP 918.26
1

Klaxon EXD Beacon 20J Xenon Red Lens 12-48v DC TCB-0011

Klaxon EXD Beacon 20J Xenon Red Lens 12-48v DC TCB-0011

Klaxon EXD Beacon 20J Xenon Red Lens 12-48v DC TCB-0011The EXD Beacon range has been approved for use in potentially explosive atmospheres and very harsh environmental conditions. These beacons have a choice of two types of light source either Xenon strobe with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings.The design allows for termination inside the enclosure. The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments.Key FeaturesApproved by ATEX and CQST IMETRO and IECEX PendingATEX II 2G Exd IIC T4 - T6 incorporating IIA IIBZones 12 Zones 2122 PendingConforms to EN IEC 60079-0 EN IEC 60079-1 and EN54360 degree light output around the vertical axisDustproof Weatherproof

GBP 930.05
1

Klaxon TCB-0003 EXD Beacon 5J Xenon Red Lens 12-48v DC

Klaxon TCB-0003 EXD Beacon 5J Xenon Red Lens 12-48v DC

Klaxon TCB-0003 EXD Beacon 5J Xenon Red Lens 12-48v DCThe EXD Beacon range has been approved for use in potentially explosive atmospheres and very harsh environmental conditions. These beacons have a choice of two types of light source either Xenon strobe with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings.The design allows for termination inside the enclosure. The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments.Key FeaturesApproved by ATEX and CQST IMETRO and IECEX PendingATEX II 2G Exd IIC T4 - T6 incorporating IIA IIBZones 12 Zones 2122 PendingConforms to EN IEC 60079-0 EN IEC 60079-1 and EN54360 degree light output around the vertical axisDustproof Weatherproof

GBP 916.21
1

Klaxon TCB-0012 EXD Beacon 20J Xenon Red Lens 100-240v AC

Klaxon TCB-0012 EXD Beacon 20J Xenon Red Lens 100-240v AC

Klaxon TCB-0012 EXD Beacon 20J Xenon Red Lens 100-240v ACThe EXD Beacon range has been approved for use in potentially explosive atmospheres and very harsh environmental conditions. These beacons have a choice of two types of light source either Xenon strobe with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings.The design allows for termination inside the enclosure. The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments.Key FeaturesApproved by ATEX and CQST IMETRO and IECEX PendingATEX II 2G Exd IIC T4 - T6 incorporating IIA IIBZones 12 Zones 2122 PendingConforms to EN IEC 60079-0 EN IEC 60079-1 and EN54360 degree light output around the vertical axisDustproof Weatherproof

GBP 930.05
1

Klaxon EXD Beacon 20J Xenon Amber Lens 12-48v DC TCB-0009

Klaxon EXD Beacon 20J Xenon Amber Lens 12-48v DC TCB-0009

Klaxon EXD Beacon 20J Xenon Amber Lens 12-48v DC TCB-0009The EXD Beacon range has been approved for use in potentially explosive atmospheres and very harsh environmental conditions. These beacons have a choice of two types of light source either Xenon strobe with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings.The design allows for termination inside the enclosure. The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments.Key FeaturesApproved by ATEX and CQST IMETRO and IECEX PendingATEX II 2G Exd IIC T4 - T6 incorporating IIA IIBZones 12 Zones 2122 PendingConforms to EN IEC 60079-0 EN IEC 60079-1 and EN54360 degree light output around the vertical axisDustproof Weatherproof

GBP 990.66
1

Talentum Dual IR Hazardous Area Flameproof Detector 16511

Talentum Dual IR Hazardous Area Flameproof Detector 16511

Talentum Dual IR Hazardous Area Flameproof Detector 16511These flame detectors give high immunity to false flame sources. They have internal self-test sources that check the detectors operation when remotely instructed.They can operate on a conventional 2-wire 14-28 Vdc fire systems or 4-20mA process control systems. Relay contacts are also available for Fire and Fault signals. The detectors operating modes can be user selected giving a choice of alarm currents response times latching or non-latching outputs and sensitivity. The detectors have a maximum ambient operating temperature of 55C.Key Features High immunity to false sources For applications with visible light present Detects invisible flames from fuels such as Hydrogen and other inorganic fuels Selectable response speed Optical self-test Low power consumption Approved to EN54-102002 IR2 Flame Detector RangeApplications Used On Churches Coal Handling Fume Cupboards Printing Spray Booths Textiles Waste Handling

GBP 2731.80
1

Klaxon EXD Beacon 10J Xenon Red Lens 12-48v DC TCB-0007

Klaxon EXD Beacon 10J Xenon Red Lens 12-48v DC TCB-0007

Klaxon EXD Beacon 10J Xenon Red Lens 12-48v DC TCB-0007The EXD Beacon range has been approved for use in potentially explosive atmospheres and very harsh environmental conditions. These beacons have a choice of two types of light source either Xenon strobe with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings.The design allows for termination inside the enclosure. The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments.Key FeaturesApproved by ATEX and CQST IMETRO and IECEX PendingATEX II 2G Exd IIC T4 - T6 incorporating IIA IIBZones 12 Zones 2122 PendingConforms to EN IEC 60079-0 EN IEC 60079-1 and EN54360 degree light output around the vertical axisDustproof Weatherproof

GBP 916.21
1

Klaxon TCB-0005 EXD Beacon 10J Xenon Amber Lens 12-48v DC

Klaxon TCB-0005 EXD Beacon 10J Xenon Amber Lens 12-48v DC

Klaxon TCB-0005 EXD Beacon 10J Xenon Amber Lens 12-48v DCThe EXD Beacon range has been approved for use in potentially explosive atmospheres and very harsh environmental conditions. These beacons have a choice of two types of light source either Xenon strobe with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings.The design allows for termination inside the enclosure. The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments.Key FeaturesApproved by ATEX and CQST IMETRO and IECEX PendingATEX II 2G Exd IIC T4 - T6 incorporating IIA IIBZones 12 Zones 2122 PendingConforms to EN IEC 60079-0 EN IEC 60079-1 and EN54360 degree light output around the vertical axisDustproof Weatherproof

GBP 916.21
1

Klaxon TCB-0002 EXD Beacon 5J Xenon Amber Lens 100-240v AC

Klaxon TCB-0002 EXD Beacon 5J Xenon Amber Lens 100-240v AC

Klaxon EXD Beacon 5J Xenon Amber Lens 100-240v AC TCB-0002The EXD Beacon range has been approved for use in potentially explosive atmospheres and very harsh environmental conditions. These beacons have a choice of two types of light source either Xenon strobe with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings.The design allows for termination inside the enclosure. The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments.Key FeaturesApproved by ATEX and CQST IMETRO and IECEX PendingATEX II 2G Exd IIC T4 - T6 incorporating IIA IIBZones 12 Zones 2122 PendingConforms to EN IEC 60079-0 EN IEC 60079-1 and EN54360 degree light output around the vertical axisDustproof Weatherproof

GBP 962.77
1

Klaxon TCB-0001 EXD Beacon 5J Xenon Amber Lens 12-48v DC

Klaxon TCB-0001 EXD Beacon 5J Xenon Amber Lens 12-48v DC

Klaxon TCB-0001 EXD Beacon 5J Xenon Amber Lens 12-48v DCThe EXD Beacon range has been approved for use in potentially explosive atmospheres and very harsh environmental conditions. These beacons have a choice of two types of light source either Xenon strobe with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings.The design allows for termination inside the enclosure. The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments.Key FeaturesApproved by ATEX and CQST IMETRO and IECEX PendingATEX II 2G Exd IIC T4 - T6 incorporating IIA IIBZones 12 Zones 2122 PendingConforms to EN IEC 60079-0 EN IEC 60079-1 and EN54360 degree light output around the vertical axisDustproof Weatherproof

GBP 916.21
1

Klaxon EXD Beacon 10J Xenon Amber Lens 100-240v AC TCB-0006

Klaxon EXD Beacon 10J Xenon Amber Lens 100-240v AC TCB-0006

Klaxon EXD Beacon 10J Xenon Amber Lens 100-240v AC TCB-0006The EXD Beacon range has been approved for use in potentially explosive atmospheres and very harsh environmental conditions. These beacons have a choice of two types of light source either Xenon strobe with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings.The design allows for termination inside the enclosure. The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments.Key FeaturesApproved by ATEX and CQST IMETRO and IECEX PendingATEX II 2G Exd IIC T4 - T6 incorporating IIA IIBZones 12 Zones 2122 PendingConforms to EN IEC 60079-0 EN IEC 60079-1 and EN54360 degree light output around the vertical axisDustproof Weatherproof

GBP 962.77
1