mcb.dk | Få success online

28 results (0,16947 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Brand

Merchant

Price (EUR)

Reset filter

Products

From

Shops

Heller SDS Max 2 Cutter 30 x 370mm

Heller SDS Max 2 Cutter 30 x 370mm

For drilling in granite, concrete, breeze block, masonry, brickwork, ceramic tiles and marble The Max Y Cutter and Max 2 Cutter have significantly less friction than the conventional bits Up to 30% more cutting power and will drill up to 30% faster than the traditional 4-Cutter Higher penetration rates means more holes at less cost Up to 46% more clearance space ensures faster spoil removal

GBP 17.40

1

Heller SDS Max 2 Cutter 28 x 370mm

Heller SDS Max 2 Cutter 28 x 370mm

For drilling in granite, concrete, breeze block, masonry, brickwork, ceramic tiles and marble The Max Y Cutter and Max 2 Cutter have significantly less friction than the conventional bits Up to 30% more cutting power and will drill up to 30% faster than the traditional 4-Cutter Higher penetration rates means more holes at less cost Up to 46% more clearance space ensures faster spoil removal

GBP 15.60

1

Broaching Cutter 18mm Short

Broaching Cutter 18mm Short

This range of broaching cutters offers better economy, quality and performance Manufactured from fully ground M2 Steel for unrivalled strength and toughness properties for the hardest applications The must-have accessory for the magnetic drill These broaching cutters are used to drill bolt holes in tough materials such as steel roof beams etc.

GBP 15.60

1

Broaching Cutter 16mm Short

Broaching Cutter 16mm Short

This range of broaching cutters offers better economy, quality and performance Manufactured from fully ground M2 Steel for unrivalled strength and toughness properties for the hardest applications The must-have accessory for the magnetic drill These broaching cutters are used to drill bolt holes in tough materials such as steel roof beams etc.

GBP 12.60

1

Broaching Cutter 17mm Short

Broaching Cutter 17mm Short

This range of broaching cutters offers better economy, quality and performance Manufactured from fully ground M2 Steel for unrivalled strength and toughness properties for the hardest applications The must-have accessory for the magnetic drill These broaching cutters are used to drill bolt holes in tough materials such as steel roof beams etc.

GBP 13.20

1

Two Flute Cutter 6.3mm diameter

Two Flute Cutter 6.3mm diameter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

GBP 13.56

1

Two Flute Cutter 12.7mm diameter

Two Flute Cutter 12.7mm diameter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

GBP 15.78

1

Two Flute Cutter 7.9mm diameter

Two Flute Cutter 7.9mm diameter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

GBP 12.24

1

Two Flute Cutter 6mm diameter

Two Flute Cutter 6mm diameter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

GBP 11.40

1

Two Flute Cutter 9.5mm diameter

Two Flute Cutter 9.5mm diameter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

GBP 14.16

1

Two Flute Cutter 10mm diameter

Two Flute Cutter 10mm diameter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

GBP 16.20

1

Two Flute Cutter 7.1mm diameter

Two Flute Cutter 7.1mm diameter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

GBP 10.76

1

Two Flute Cutter 19.1mm diameter

Two Flute Cutter 19.1mm diameter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

GBP 17.15

1

Two Flute Cutter 9mm diameter

Two Flute Cutter 9mm diameter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

GBP 12.94

1

Two Flute Cutter 6.0mm diameter

Two Flute Cutter 6.0mm diameter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

GBP 12.24

1

Two Flute Cutter 4mm diameter

Two Flute Cutter 4mm diameter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

GBP 15.78

1

Two Flute Cutter 8.0mm diameter

Two Flute Cutter 8.0mm diameter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

GBP 12.60

1

Two Flute Cutter 10mm diameter

Two Flute Cutter 10mm diameter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

GBP 14.62

1

Two Flute Cutter 12.7mm diameter

Two Flute Cutter 12.7mm diameter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

GBP 17.15

1

Two Flute Cutter 3.2mm diameter

Two Flute Cutter 3.2mm diameter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

GBP 16.48

1

Two Flute Cutter 9.5mm diameter

Two Flute Cutter 9.5mm diameter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

GBP 15.78

1

Two Flute Cutter 6.3mm diameter

Two Flute Cutter 6.3mm diameter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

GBP 10.76

1

Two flute cutter 10mm diameter

Two flute cutter 10mm diameter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

GBP 16.20

1

Two Flute Cutter 12.7mm diameter

Two Flute Cutter 12.7mm diameter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

GBP 17.15

1

Bosch Titanium 6.5 x 101mm High Speed Steel Twist Drill Bit

Bosch Titanium 6.5 x 101mm High Speed Steel Twist Drill Bit

Twist drill bit made of high speed steel manufactured to DIN 338 Right-hand cutting twist drill bit, Type N, 135 drill bit tip, split point manufactured to DIN 1412 C, diameter tolerance h 8 Twist drill bit ground from solid metal with high surface quality due to titanium-nitride coating Shank equal to drill bit diameter, drill bit colour: golden Two-cutter, cylindrical, two flutes Note: Use the universal cutting oil 2 607 001 409 when working with HSS-TiN metal drill bits

GBP 12.64

1