2 results (0,12920 seconds)

Show all filters

Brand

Colour

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

2Work Floor Polish 5L - 2W04610

2Work Floor Polish 5L - 2W04610

Give your floors a high quality shine with this wet look floor polish from 2Work, supplied in a 5 litre bottle. Developed to prolong the life of a floor, the thermoplastic polymer will not only produce a stunning shine, but will also protect the floor from scuffs and scratches. Ultra hard-wearing and with a good slip-resistance, the floor polish is suitable for use on all non-porous floors including vinyl, thermoplastic, linoleum, rubber, asphalt, sealed wood, marble and terrazzo. Produces outstanding wet look shine finish Thermoplastic polymer protects flooring from scuffs and scratches Builds up good slip-resistance Ultra hard-wearing and long-lasing Suitable for all non-porous floors including vinyl, marble and rubber Dilution: 1:20 as a spray for stripping polish, 1:4 for stripping polish 5 litres For Professional Use Only

GBP 39.99
1

Prochem C503 Proshine 2 x 5 Litre

Prochem C503 Proshine 2 x 5 Litre

Prochem C503 Proshine is a high solids metallised 'dry-bright' floor finish formulated to give a long lasting deep gloss shine on vinyl, linoleum, thermo-plastic, rubber, sealed wood, cork, concrete, asphalt, terrazzo and other non-porous smooth floors coverings. High solids metallised emulsion floor polish. - High gloss, self-shining finish for a long lasting slip resistant shine. - Two or three thin coats recommended for best results. - White emulsion with acrylic odour. - Coverage approx. 250m2 per 5 litres per coat. Directions - For professional and industrial use only. - Proshine is ready-to-use. Do not dilute with water. - Do not shake container. - Ensure floor is clean, dry and free from all residues. Semi-porous, concrete and impoverished floors should be sealed with a base coat of Proseal. - Spread Proshine evenly using a slightly damp mop or polish applicator. Apply 2 or 3 very thin coats, allowing 30 to 60 minutes between coats. Do not over apply. - Coverage is approximately 250 m2 per 5L per coat. - Allow final coat to dry completely before re-use. Do not buff floor at this stage. - Periodically the floor gloss can be maintained by spray buffing with Protreat. - Keep from freezing. pH Values - pH Concentrate: 9.0 - pH Diluted: Not applicable

GBP 0.00
1