mcb.dk | Få success online

Ziton ACA-RS-100 Alarmline Silicon Sleeve - Pack of 100

Ziton ACA-RS-100 Alarmline Silicon Sleeve - Pack of 100The ACA-RS series silicone sleeves are designed to protect linear heat sensor cable against mechanical damage from the tie wrap used when the cable is secured. The ACA-RS is a split sleeve used to protect the sensor cable from being crushed or damaged when attached to fixing clips or brackets. It acts as an insulator to prevent the transfer of heat through these metal clips or brackets to the LHD cable and is fire resistant.Key FeaturesProtection of linear heat cable against mechanical damageFor use with any LHD fastening brackets or clipsFire resistantPack of 100

GBP 61.79

1

Ziton ACA-RS-025 Alarmline Silicon Sleeve - Pack of 25

Ziton ACA-RS-025 Alarmline Silicon Sleeve - Pack of 25The ACA-RS series silicone sleeves are designed to protect linear heat sensor cable against mechanical damage from the tie wrap used when the cable is secured. The ACA-RS is a split sleeve used to protect the sensor cable from being crushed or damaged when attached to fixing clips or brackets. It acts as an insulator to prevent the transfer of heat through these metal clips or brackets to the LHD cable and is fire resistant.Key FeaturesProtection of linear heat cable against mechanical damageFor use with any LHD fastening brackets or clipsFire resistantPack of 25

GBP 18.96

1

Ziton ACA-BI20-100 Bracket quotIquot - 200mm 7.9quot Zintec cw Silicon sleeve - Pack of 100

Ziton ACA-BI20-100 Bracket I - 200mm 7.9 Zintec cw Silicon sleeve - Pack of 100The ACA-BI series I-brackets extension pieces is designed to extend the positioning of linear heat cable installed on 7-brackets and edge clips. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.The ACA-BI may be fitted to the bracket or clip and secured in place using a suitable bolt and nut at one end. The hole at the other end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. The extension piece allows support for the sensor cable an additional approx. 200mm away from the end of the bracket or clip.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on existing brackets and clips

GBP 370.62

1

Ziton Bracket quotIquot 200mm 7.9quot Stainless Steel cw Silicon sleeve

Ziton Bracket I 200mm 7.9 Stainless Steel cw Silicon sleeveThe ACA-BI series I-brackets extension pieces is designed to extend the positioning of linear heat cable installed on 7-brackets and edge clips. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.The ACA-BI may be fitted to the bracket or clip and secured in place using a suitable bolt and nut at one end. The hole at the other end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. The extension piece allows support for the sensor cable an additional approx. 200mm away from the end of the bracket or clip.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on existing brackets and clipsAvailable in stainless steel

GBP 667.13

1

Ziton ACA-BI20-025 Bracket quotIquot - 200mm 7.9quot Zintec cw Silicon sleeve - Pack of 25

Ziton ACA-BI20-025 Bracket I - 200mm 7.9 Zintec cw Silicon sleeve - Pack of 25The ACA-BI series I-brackets extension pieces is designed to extend the positioning of linear heat cable installed on 7-brackets and edge clips. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.The ACA-BI may be fitted to the bracket or clip and secured in place using a suitable bolt and nut at one end. The hole at the other end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. The extension piece allows support for the sensor cable an additional approx. 200mm away from the end of the bracket or clip.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on existing brackets and clips

GBP 113.51

1

Ziton ACA-TW17-025 Tie Wrap PA66 170C 338F - Pack of 25

Ziton ACA-TW17-025 Tie Wrap PA66 170C 338FThe ACA-TW series tie wraps cable ties is designed to secure linear heat sensor cable to the LHD brackets and clips. The tie wraps are available in various temperature ratings for matching or surpassing the temperature specifications of the selected LHD sensor cable.UV stabilised and stainless steel variants are suitable for outdoor applications whilst stainless steel variants additionally allow for the installation of very high temperature digital cable.A tool ACA-TWT is available for the stainless steel tie wrap installation.Key FeaturesEasy installation of linear heat cableFor use with LHD brackets and clipsIndoor applicationsAvailable in ETFE Ethylene tetrafluoroethylenePack of 25

GBP 92.92

1

Ziton ACA-TWSS-025 Tie Wrap Stainless Steel - Pack of 25

Ziton ACA-TWSS-025 Tie Wrap Stainless Steel - Pack of 25The ACA-TW series tie wraps cable ties is designed to secure linear heat sensor cable to the LHD brackets and clips. The tie wraps are available in various temperature ratings for matching or surpassing the temperature specifications of the selected LHD sensor cable.UV stabilised and stainless steel variants are suitable for outdoor applications whilst stainless steel variants additionally allow for the installation of very high temperature digital cable.A tool ACA-TWT is available for the stainless steel tie wrap installation.Key FeaturesEasy installation of linear heat cableFor use with LHD brackets and clipsIndoor and outdoor applicationsAvailable in stainless steelPack of 25

GBP 48.08

1

Ziton ACA-TWSS-100 Tie Wrap Stainless Steel - Pack of 100

Ziton ACA-TWSS-100 Tie Wrap Stainless Steel - Pack of 100The ACA-TW series tie wraps cable ties is designed to secure linear heat sensor cable to the LHD brackets and clips. The tie wraps are available in various temperature ratings for matching or surpassing the temperature specifications of the selected LHD sensor cable.UV stabilised and stainless steel variants are suitable for outdoor applications whilst stainless steel variants additionally allow for the installation of very high temperature digital cable.A tool ACA-TWT is available for the stainless steel tie wrap installation.Key FeaturesEasy installation of linear heat cableFor use with LHD brackets and clipsIndoor and outdoor applicationsAvailable in stainless steelPack of 100

GBP 156.90

1

Ziton ACA-TW17-100 Tie Wrap PA66 170C 338F - Pack of 100

Ziton ACA-TW17-100 Tie Wrap PA66 170C 338FThe ACA-TW series tie wraps cable ties is designed to secure linear heat sensor cable to the LHD brackets and clips. The tie wraps are available in various temperature ratings for matching or surpassing the temperature specifications of the selected LHD sensor cable.UV stabilised and stainless steel variants are suitable for outdoor applications whilst stainless steel variants additionally allow for the installation of very high temperature digital cable.A tool ACA-TWT is available for the stainless steel tie wrap installation.Key FeaturesEasy installation of linear heat cableFor use with LHD brackets and clipsIndoor applicationsAvailable in ETFE Ethylene tetrafluoroethylenePack of 100

GBP 303.17

1

Ziton ACA-TW11W-100 Tie Wrap PA66 110C 230F - Pack of 100

Ziton ACA-TW11W-100 Tie Wrap PA66 110C 230F - Pack of 100The ACA-TW series tie wraps cable ties is designed to secure linear heat sensor cable to the LHD brackets and clips. The tie wraps are available in various temperature ratings for matching or surpassing the temperature specifications of the selected LHD sensor cable.UV stabilised and stainless steel variants are suitable for outdoor applications whilst stainless steel variants additionally allow for the installation of very high temperature digital cable.A tool ACA-TWT is available for the stainless steel tie wrap installation.Key FeaturesEasy installation of linear heat cableFor use with LHD brackets and clipsIndoor and outdoor applicationsAvailable in PA66Pack of 100

GBP 14.52

1

Ziton Tie Wrap PA66 110C 230F

Ziton Tie Wrap PA66 110C 230FThe ACA-TW series tie wraps cable ties is designed to secure linear heat sensor cable to the LHD brackets and clips. The tie wraps are available in various temperature ratings for matching or surpassing the temperature specifications of the selected LHD sensor cable.UV stabilised and stainless steel variants are suitable for outdoor applications whilst stainless steel variants additionally allow for the installation of very high temperature digital cable.A tool ACA-TWT is available for the stainless steel tie wrap installation.Key FeaturesEasy installation of linear heat cableFor use with LHD brackets and clipsIndoor and outdoor applicationsAvailable in PA66Available in quantities of 25 or 100

GBP 4.45

1

Ziton ACA-BL20-100 quotLquot Bracket 200mm 7.9quot Zintec cw Silicon Sleeve - Pack of 100

ZitonACA-BL20-100L Bracket 200mm 7.9 Zintec cw Silicon Sleeve - Pack of 25The ACA-BL series L-brackets is designed to support linear heat cable above the risk area e.g. the top run of a cable tray. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.The ACA-BL may be fitted to the cable tray and secured in place using a suitable bolt and nut at one end. The hole at the other end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. The L-bracket allows support for the sensor cable at the selected distance away from the detection area.Key FeaturesEasy installation of linear heat cableFor use on cable traysAvailable in zintecPack of 100

GBP 487.28

1

Ziton ACA-BL05-100 quotLquot Bracket 50mm 2quot Zintec cw Silicon Sleeve - Pack of 100

Ziton ACA-BL05-100 L Bracket 50mm 2 Zintec cw Silicon Sleeve - Pack of 100The ACA-BL series L-brackets is designed to support linear heat cable above the risk area e.g. the top run of a cable tray. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.InstallationThe ACA-BL may be fitted to the cable tray and secured in place using a suitable bolt and nut at one end. The hole at the other end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. The L-bracket allows support for the sensor cable at the selected distance away from the detection area.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on cable traysAvailable in zintecPack of 100

GBP 167.51

1

Ziton ACA-BL05SS-100 quotLquot Bracket 50mm 2quot Stainless Steel cw Silicon Sleeve - Pack of 100

Ziton ACA-BL05SS-100 L Bracket 50mm 2 Stainless Steel cw Silicon Sleeve - Pack of 100The ACA-BL series L-brackets is designed to support linear heat cable above the risk area e.g. the top run of a cable tray. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.InstallationThe ACA-BL may be fitted to the cable tray and secured in place using a suitable bolt and nut at one end. The hole at the other end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. The L-bracket allows support for the sensor cable at the selected distance away from the detection area.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on cable traysAvailable in zintecPack of 100

GBP 240.52

1

Ziton ACA-BL05-025 quotLquot Bracket 50mm 2quot Zintec cw Silicon Sleeve - Pack of 25

Ziton ACA-BL05-025 L Bracket 50mm 2 Zintec cw Silicon Sleeve - Pack of 25The ACA-BL series L-brackets is designed to support linear heat cable above the risk area e.g. the top run of a cable tray. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.InstallationThe ACA-BL may be fitted to the cable tray and secured in place using a suitable bolt and nut at one end. The hole at the other end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. The L-bracket allows support for the sensor cable at the selected distance away from the detection area.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on cable traysAvailable in zintecPack of 25

GBP 52.36

1

Ziton ACA-BL20-025 quotLquot Bracket 200mm 7.9quot Zintec cw Silicon Sleeve - Pack of 25

Ziton ACA-BL20-025 L Bracket 200mm 7.9 Zintec cw Silicon Sleeve - Pack of 25The ACA-BL series L-brackets is designed to support linear heat cable above the risk area e.g. the top run of a cable tray. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.The ACA-BL may be fitted to the cable tray and secured in place using a suitable bolt and nut at one end. The hole at the other end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. The L-bracket allows support for the sensor cable at the selected distance away from the detection area.Key FeaturesEasy installation of linear heat cableFor use on cable traysAvailable in zintecPack of 25

GBP 149.32

1

Ziton ACA-BL20SS-025 quotLquot Bracket 200mm 7.9quot Stainless Steel cw Silicon Sleeve - Pack of 25

Ziton ACA-BL20SS-025 L Bracket 200mm 7.9 Stainless Steel cw Silicon SleeveThe ACA-BL series L-brackets is designed to support linear heat cable above the risk area e.g. the top run of a cable tray. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.The ACA-BL may be fitted to the cable tray and secured in place using a suitable bolt and nut at one end. The hole at the other end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. The L-bracket allows support for the sensor cable at the selected distance away from the detection area.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on cable traysAvailable in stainless steelPack of 25

GBP 220.75

1

Ziton ACA-BL10-100 quotLquot Bracket 100mm 3.9quot Zintec cw Silicon Sleeve - Pack of 100

Ziton ACA-BL10-100 L Bracket 100mm 3.9 Zintec cw Silicon Sleeve - Pack of 100The ACA-BL series L-brackets is designed to support linear heat cable above the risk area e.g. the top run of a cable tray. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.InstallationThe ACA-BL may be fitted to the cable tray and secured in place using a suitable bolt and nut at one end. The hole at the other end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. The L-bracket allows support for the sensor cable at the selected distance away from the detection area.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on cable traysAvailable in zintecPack of 100

GBP 220.81

1

Ziton ACA-BL10SS-100 quotLquot Bracket 100mm 3.9quot Stainless Steel cw Silicon Sleeve - Pack of 100

Ziton ACA-BL10SS-100 L Bracket 100mm 3.9 Stainless Steel cw Silicon Sleeve - Pack of 100The ACA-BL series L-brackets is designed to support linear heat cable above the risk area e.g. the top run of a cable tray. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.InstallationThe ACA-BL may be fitted to the cable tray and secured in place using a suitable bolt and nut at one end. The hole at the other end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. The L-bracket allows support for the sensor cable at the selected distance away from the detection area.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on cable traysAvailable in zintecPack of 100

GBP 310.18

1

Ziton ACA-BL20SS-100 quotLquot Bracket 200mm 7.9quot Stainless Steel cw Silicon Sleeve - Pack of 100

Ziton ACA-BL20SS-100 L Bracket 200mm 7.9 Stainless Steel cw Silicon Sleeve - Pack of 100The ACA-BL series L-brackets is designed to support linear heat cable above the risk area e.g. the top run of a cable tray. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.The ACA-BL may be fitted to the cable tray and secured in place using a suitable bolt and nut at one end. The hole at the other end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. The L-bracket allows support for the sensor cable at the selected distance away from the detection area.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on cable traysAvailable in stainless steelPack of 100

GBP 720.67

1

Ziton ZP755-COV-R Cover for Base Sounder

Ziton ZP755-COV-R Cover for Base SounderDesigned to be used with the ZP755B series base sounders and notification devices the ZP755-COV-P is a POLAR WHITE cap that allows these notification devices to be used in standalone mode as normal room devices i.e. without a device in the base. This reduces the number of costly products on the shelf for many customers reducing the number of notification SKUs they need to carry in stock.Other applicationsAs the ZP755-COV-P may be fitted to any Ziton ZP7 series detector base other applications includeProtecting an installed Ziton detector base when it is not in use avoiding the need to remove the base from the ceiling and rewiring the detection loop as a result. This saves extensive installation and maintenance time and related cost.Changing a base isolator into a stand-alone isolator reducing the complexity of the variations of isolators that needs to be installed. As a consequence installations are simplified and the chance of cabling errors reduced.OptionsDepending on the colour requirement the ZP755-COV is also available in RED order code 70802Key FeaturesEasy to installEasy to cleanConverts a base notification application to a standalone notification applicationProtects loop cabling in unused detector basesConverts an isolator base application into a standalone isolator application

GBP 4.16

1

DIGITAL MARKETING

Brand

Merchant

Price (EUR)