6 results (0,12935 seconds)

Brand

Colour

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Zinsser Gardz Sealer Primer 500ml ZINGS500

Zinsser Gardz Sealer Primer 500ml ZINGS500

Zinsser Gardz Sealer Primer is a clear, water-based, acrylic resin sealer that penetrates deeply into porous surfaces. It dries fast, and forms a hard, moisture-proof film that prevents drywall blistering and bubbling. It binds down chalky surfaces, strengthens soft texture finishes, and seals in residual wallpaper paste. Gardz Sealer Primer can be applied to high-pH surfaces, and is easily cleaned up with soap and water. Recommended Uses Damaged Drywall prevents bubbles that form when damaged drywall is skim coated with spackling or joint compound. It penetrates and seals damaged facing paper, restoring it to a sound surface for repairs, suitable for painting or wallcovering. New Drywall / Joint Compound and Spackling new gypsum drywall, joint compound and spackling are very porous and can make finish coatings appear splotchy and uneven. It penetrates and uniformly seals, creating a moisture resistant film that protects drywall from blistering, tearing and other damage when redecorating in the future. Plaster freshly applied plaster is extremely porous but also extremely alkaline with a pH of 12.0 or more in many cases. Allow new plaster to cure at least 24 hours before applying. Before priming old, bare plaster, be sure to determine that the surface is clean, dry and in sound condition, taking care to repair any cracks or holes with spackling paste or joint compound before sealing the surface. Calcimine is a very old form of plaster that is extremely chalky and water-sensitive. It penetrates calcimine more effectively than oil-base coatings and has a much lower odour. Because it resists moisture, it prevents water-based topcoat paint or texture finishes from softening up calcimine layers underneath. Wallpaper Adhesive Residue water-based coatings or texture finishes will reactivate old wallpaper adhesive, resulting in cracking and peeling. Formulated to completely seal in residual adhesive and prevent it from ruining water-based topcoats and texture finishes. Texture and Popcorn Finishes Can be used to seal textured walls and popcorn ceilings before applying water base primer or paint. It penetrates soft or crumbly texture material and hardens it, creating a durable, water resistant barrier that prevents primer or paint from softening texture material underneath. Old Wallpaper most of the wallpaper installed before the 1960&rsquos was true paper, with no vinyl coating. To determine if the wallcovering is a true paper wipe a wet sponge across the surface, if the water is readily absorbed it means there is no vinyl coating. This type of wallcovering can be effectively sealed. First, peel away any loose or frayed edges, or whatever remains should be firmly adhered to the wall. Apply as you would to any other wall surface. Pre-Wallcovering Primer penetrates, seals, sizes and protects drywall facing paper and skim coat, providing a properly sealed surface for new wallcovering. At redecorating time, it protects the surface of the drywall when the old wallcovering is stripped off. Builder&rsquos Flat Paint penetrates chalky, builder&rsquos flat paint and binds it to the wall, providing water-resistant protection from paint, wallcovering and texture finishes. Zinsser Gardz Sealer Primer 1 litre Colour Clear. Size 500ml.

GBP 9.99
2

Zinsser Cover Stain Primer - Sealer 500ml ZINCSP500

Zinsser B.I.N Primer, Sealer & Stain Killer Paint White 500ml ZINBIN500

Zinsser Bulls Eye 1-2-3 Primer & Sealer Paint 500ml ZINBE123500

Zinsser Bulls Eye 1-2-3 Primer & Sealer Paint 500ml ZINBE123500

Zinsser's Bulls Eye 1-2-3 is a universal interior and exterior, water-based, primer-sealer. It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces. Bulls Eye 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces. A bond coat primer thats great for hard-to-stick surfaces, it offers excellent adhesion without sanding. Bulls Eye 1-2-3 also prevents rust formation when applied over clean ferrous metal such as iron and steel. It is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of the paint job.Bulls Eye 1-2-3 is great for blocking stains. It permanently and completely seals graffiti, grease spots, tar and asphalt inside and out. It is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters any interior or exterior metal surface.Bulls Eye 1-2-3 is white in colour and can be applied via air sprayer, brush, conventional spray, pad or roller. It has a quick 35 minute drying time and 1 hour dry time and can be tinted towards the colour of your topcoat (mid-tone colours only) to eliminate the need for one coat of paint saving both time and money. Application information: 10m per litre. Touch dry: 35 minutes. Hard dry: 7 days. Recoatable: 1 hour.

GBP 15.39
1