mcb.dk | Få success online

Watco Concrex Cold Set 10KG CXCS10 CXCSDF25

Images for illustration purposes onlyWatco Concrex Deep Fill Cold Set performs in a similar way to Concrex Deep Fill but the special formulation allows for essential repairs in cold conditions, between 0C and 10C. Recommended areas of useSuitable for use inside and outConcrete, sand and cement, metalHoles in concrete floorsDamaged stepsBroken floor jointsEroded, uneven concreteFeaturesDepth: apply from 15-100mm thick in one layer, reducing downtimeHeavy duty, two part epoxy resin mortarCures at 0C for all year round maintenanceVirtually indestructible Coloured and deep fill versions availableGood chemical resistanceResin rich for thin section and feather-edge repairsSuitable for interior and exterior repairs

GBP 319.99

1

Watco Chemi-Coat Cold Cure Mid Green, 4L

Images for illustration purposes onlyChemi-Coat Cold Cure is a one coat tough industrial paint with excellent durability and chemical resistance. It is suitable for a variety of floor surfaces as well as being solvent free. It provides a superb glossy, hygienic and easily cleaned surface and will cure at temperatures as low as 0C. It allows refrigeration areas and unheated warehousing to be painted and protected at any time of the year.FeaturesExcellent resistance to many chemicalsSuitable for a variety of floor and wall surfacesVirtually solvent freeReady for heavy traffic after 48 hours at 5C

GBP 299.99

1

Watco Chemi-Coat Cold Cure Safety Yellow, 4L

Images for illustration purposes onlyChemi-Coat Cold Cure is a one coat tough industrial paint with excellent durability and chemical resistance. It is suitable for a variety of floor surfaces as well as being solvent free. It provides a superb glossy, hygienic and easily cleaned surface and will cure at temperatures as low as 0C. It allows refrigeration areas and unheated warehousing to be painted and protected at any time of the year.FeaturesExcellent resistance to many chemicalsSuitable for a variety of floor and wall surfacesVirtually solvent freeReady for heavy traffic after 48 hours at 5C

GBP 299.99

1

Watco Chemi-Coat Cold Cure Tile Red, 4L

Images for illustration purposes onlyChemi-Coat Cold Cure is a one coat tough industrial paint with excellent durability and chemical resistance. It is suitable for a variety of floor surfaces as well as being solvent free. It provides a superb glossy, hygienic and easily cleaned surface and will cure at temperatures as low as 0C. It allows refrigeration areas and unheated warehousing to be painted and protected at any time of the year.FeaturesExcellent resistance to many chemicalsSuitable for a variety of floor and wall surfacesVirtually solvent freeReady for heavy traffic after 48 hours at 5C

GBP 299.99

1

Watco Chemi-Coat Cold Cure Black, 4L

Images for illustration purposes onlyChemi-Coat Cold Cure is a one coat tough industrial paint with excellent durability and chemical resistance. It is suitable for a variety of floor surfaces as well as being solvent free. It provides a superb glossy, hygienic and easily cleaned surface and will cure at temperatures as low as 0C. It allows refrigeration areas and unheated warehousing to be painted and protected at any time of the year.FeaturesExcellent resistance to many chemicalsSuitable for a variety of floor and wall surfacesVirtually solvent freeReady for heavy traffic after 48 hours at 5C

GBP 299.99

1

Watco Chemi-Coat Cold Cure Dark Grey, 4L

Images for illustration purposes onlyChemi-Coat Cold Cure is a one coat tough industrial paint with excellent durability and chemical resistance. It is suitable for a variety of floor surfaces as well as being solvent free. It provides a superb glossy, hygienic and easily cleaned surface and will cure at temperatures as low as 0C. It allows refrigeration areas and unheated warehousing to be painted and protected at any time of the year.FeaturesExcellent resistance to many chemicalsSuitable for a variety of floor and wall surfacesVirtually solvent freeReady for heavy traffic after 48 hours at 5C

GBP 299.99

1

Watco Chemi-Coat Cold Cure Light Grey, 4L

Images for illustration purposes onlyChemi-Coat Cold Cure is a one coat tough industrial paint with excellent durability and chemical resistance. It is suitable for a variety of floor surfaces as well as being solvent free. It provides a superb glossy, hygienic and easily cleaned surface and will cure at temperatures as low as 0C. It allows refrigeration areas and unheated warehousing to be painted and protected at any time of the year.FeaturesExcellent resistance to many chemicalsSuitable for a variety of floor and wall surfacesVirtually solvent freeReady for heavy traffic after 48 hours at 5C

GBP 299.99

1

Watco Chemi-Coat Cold Cure Mid Blue, 4L

Images for illustration purposes onlyChemi-Coat Cold Cure is a one coat tough industrial paint with excellent durability and chemical resistance. It is suitable for a variety of floor surfaces as well as being solvent free. It provides a superb glossy, hygienic and easily cleaned surface and will cure at temperatures as low as 0C. It allows refrigeration areas and unheated warehousing to be painted and protected at any time of the year.FeaturesExcellent resistance to many chemicalsSuitable for a variety of floor and wall surfacesVirtually solvent freeReady for heavy traffic after 48 hours at 5C

GBP 299.99

1

Watco Chemi-Coat Cold Cure Mid Grey, 4L

Images for illustration purposes onlyChemi-Coat Cold Cure is a one coat tough industrial paint with excellent durability and chemical resistance. It is suitable for a variety of floor surfaces as well as being solvent free. It provides a superb glossy, hygienic and easily cleaned surface and will cure at temperatures as low as 0C. It allows refrigeration areas and unheated warehousing to be painted and protected at any time of the year.FeaturesExcellent resistance to many chemicalsSuitable for a variety of floor and wall surfacesVirtually solvent freeReady for heavy traffic after 48 hours at 5C

GBP 299.99

1

Watco Safety Grip Cold Cure Tile Red 5m2

Images for illustration purposes only Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 189.99

1

Watco Safety Grip Cold Cure Safety Yellow 5m2

Images for illustration purposes only Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 189.99

1

Watco Safety Grip Cold Cure Black 5m2

Images for illustration purposes only Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 189.99

1

Watco Safety Grip Cold Cure Light Grey 5m2

Images for illustration purposes only Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 189.99

1

Watco Safety Grip Cold Cure Safety Green 5m2

Images for illustration purposes only Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 189.99

1

Watco Safety Grip Cold Cure Safety Blue 5m2

Images for illustration purposes only Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 189.99

1

Watco Safety Grip Cold Cure Buff 5m2

Images for illustration purposes only Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 189.99

1

Watco Safety Grip Cold Cure Mid Grey 5m2

Images for illustration purposes only Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 189.99

1

Watco Safety Grip Flex, 5m SQ Mid Blue

Images for illustration purposes only Watco Safety Grip Flex, a tough, flexible polyaspartic coating, designed to provide a safe surface both inside and out. Just one coat minimises the risks of accidents throughout the workplace, particularly for wet or oily areas which may be subject to movement, such as metal or wooden ramps or around vibrating machinery. Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles Recommended areas of use Slippery, hazardous, wet or oily areas Around vibrating machinery Steps, Ramps/Disabled Ramps, Foot Bridges Loading Bays, Walkways and Entrance Ways Car Parks

GBP 189.99

1

Watco Safety Grip Flex, 5m SQ Mid Grey

Images for illustration purposes only Watco Safety Grip Flex, a tough, flexible polyaspartic coating, designed to provide a safe surface both inside and out. Just one coat minimises the risks of accidents throughout the workplace, particularly for wet or oily areas which may be subject to movement, such as metal or wooden ramps or around vibrating machinery. Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles Recommended areas of use Slippery, hazardous, wet or oily areas Around vibrating machinery Steps, Ramps/Disabled Ramps, Foot Bridges Loading Bays, Walkways and Entrance Ways Car Parks

GBP 189.99

1

Watco Safety Grip Flex, 5m SQ Yellow

Images for illustration purposes only Watco Safety Grip Flex, a tough, flexible polyaspartic coating, designed to provide a safe surface both inside and out. Just one coat minimises the risks of accidents throughout the workplace, particularly for wet or oily areas which may be subject to movement, such as metal or wooden ramps or around vibrating machinery. Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles Recommended areas of use Slippery, hazardous, wet or oily areas Around vibrating machinery Steps, Ramps/Disabled Ramps, Foot Bridges Loading Bays, Walkways and Entrance Ways Car Parks

GBP 189.99

1

Watco Safety Grip Flex, 5m SQ Light Grey

Images for illustration purposes only Watco Safety Grip Flex, a tough, flexible polyaspartic coating, designed to provide a safe surface both inside and out. Just one coat minimises the risks of accidents throughout the workplace, particularly for wet or oily areas which may be subject to movement, such as metal or wooden ramps or around vibrating machinery. Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles Recommended areas of use Slippery, hazardous, wet or oily areas Around vibrating machinery Steps, Ramps/Disabled Ramps, Foot Bridges Loading Bays, Walkways and Entrance Ways Car Parks

GBP 189.99

1

Watco Safety Grip Flex, 5m SQ Tile Red

Images for illustration purposes only Watco Safety Grip Flex, a tough, flexible polyaspartic coating, designed to provide a safe surface both inside and out. Just one coat minimises the risks of accidents throughout the workplace, particularly for wet or oily areas which may be subject to movement, such as metal or wooden ramps or around vibrating machinery. Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles Recommended areas of use Slippery, hazardous, wet or oily areas Around vibrating machinery Steps, Ramps/Disabled Ramps, Foot Bridges Loading Bays, Walkways and Entrance Ways Car Parks

GBP 189.99

1

Watco Fastcoat Mid Grey, 2.5L

Images for illustration purposes only Watco Fastcoat is a new type of resin formulation that allows you to have your floor cleaned, prepared and painted within a single day. Uniquely developed by Watcos paint chemists, Fastcoat is a revolution in floor coatings that has only been made possible by recent developments in polyaspartic resin technology. Our unique formulation uses this incredibly versatile resin to produce a high grade, high performance paint for heavily used areas both inside and outside. Recommended areas of use Production Areas Warehouses Features Revolutionary, high performance, two part, polyaspartic resin formulation Exceptionally fast curing - apply 2 coats in one day to reduce downtime Extremely strong easily copes with very heavy traffic Superior abrasion and scratch resistance Can be applied at low temperatures as low as -10C and as high as 25C Excellent resistance to UV and weathering Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance -10C 24 hours 16 hours 30 hours 72 hours 14 days 0C 12 hours 8 hours 16 hours 30 hours 14 days 10C 6 hours 4 hour 8 hours 16 hours 7 days 20C 4 hours 2 hour 6 hours 16 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 199.99

1

Watco Fastcoat Mid Blue, 2.5L

Images for illustration purposes only Watco Fastcoat is a new type of resin formulation that allows you to have your floor cleaned, prepared and painted within a single day. Uniquely developed by Watcos paint chemists, Fastcoat is a revolution in floor coatings that has only been made possible by recent developments in polyaspartic resin technology. Our unique formulation uses this incredibly versatile resin to produce a high grade, high performance paint for heavily used areas both inside and outside. Recommended areas of use Production Areas Warehouses Features Revolutionary, high performance, two part, polyaspartic resin formulation Exceptionally fast curing - apply 2 coats in one day to reduce downtime Extremely strong easily copes with very heavy traffic Superior abrasion and scratch resistance Can be applied at low temperatures as low as -10C and as high as 25C Excellent resistance to UV and weathering Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance -10C 24 hours 16 hours 30 hours 72 hours 14 days 0C 12 hours 8 hours 16 hours 30 hours 14 days 10C 6 hours 4 hour 8 hours 16 hours 7 days 20C 4 hours 2 hour 6 hours 16 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 199.99

1

Watco Fastcoat Tile Red, 2.5L

Images for illustration purposes only Watco Fastcoat is a new type of resin formulation that allows you to have your floor cleaned, prepared and painted within a single day. Uniquely developed by Watcos paint chemists, Fastcoat is a revolution in floor coatings that has only been made possible by recent developments in polyaspartic resin technology. Our unique formulation uses this incredibly versatile resin to produce a high grade, high performance paint for heavily used areas both inside and outside. Recommended areas of use Production Areas Warehouses Features Revolutionary, high performance, two part, polyaspartic resin formulation Exceptionally fast curing - apply 2 coats in one day to reduce downtime Extremely strong easily copes with very heavy traffic Superior abrasion and scratch resistance Can be applied at low temperatures as low as -10C and as high as 25C Excellent resistance to UV and weathering Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance -10C 24 hours 16 hours 30 hours 72 hours 14 days 0C 12 hours 8 hours 16 hours 30 hours 14 days 10C 6 hours 4 hour 8 hours 16 hours 7 days 20C 4 hours 2 hour 6 hours 16 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 199.99

1

DIGITAL MARKETING

Brand

Colour

Size

Merchant

Price (EUR)

Watco Concrex Cold Set 10KG CXCS10 CXCSDF25

Watco Chemi-Coat Cold Cure Mid Green, 4L

Watco Chemi-Coat Cold Cure Safety Yellow, 4L

Watco Chemi-Coat Cold Cure Tile Red, 4L

Watco Chemi-Coat Cold Cure Black, 4L

Watco Chemi-Coat Cold Cure Dark Grey, 4L

Watco Chemi-Coat Cold Cure Light Grey, 4L

Watco Chemi-Coat Cold Cure Mid Blue, 4L

Watco Chemi-Coat Cold Cure Mid Grey, 4L

Watco Safety Grip Cold Cure Tile Red 5m2

Watco Safety Grip Cold Cure Safety Yellow 5m2

Watco Safety Grip Cold Cure Black 5m2

Watco Safety Grip Cold Cure Light Grey 5m2

Watco Safety Grip Cold Cure Safety Green 5m2

Watco Safety Grip Cold Cure Safety Blue 5m2

Watco Safety Grip Cold Cure Buff 5m2

Watco Safety Grip Cold Cure Mid Grey 5m2

Watco Safety Grip Flex, 5m SQ Mid Blue

Watco Safety Grip Flex, 5m SQ Mid Grey

Watco Safety Grip Flex, 5m SQ Yellow

Watco Safety Grip Flex, 5m SQ Light Grey

Watco Safety Grip Flex, 5m SQ Tile Red

Watco Fastcoat Mid Grey, 2.5L

Watco Fastcoat Mid Blue, 2.5L

Watco Fastcoat Tile Red, 2.5L

Powered by Cobiro