796 results (0,13972 seconds)

Show all filters

Brand

Colour

Show all

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Watco Safety Grip Safety Blue 5m2

Watco Safety Grip Safety Blue 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99
1

Watco Safety Grip Safety Yellow 5m2

Watco Safety Grip Safety Yellow 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99
1

Watco SGBUF Safety Grip Buff 5m2

Watco SGBUF Safety Grip Buff 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99
1

Watco Safety Grip Tile Red 5m2

Watco Safety Grip Tile Red 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99
1

Watco Safety Grip Light Grey 5m2

Watco Safety Grip Light Grey 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99
1

Watco Safety Grip Safety Green 5m2

Watco Safety Grip Safety Green 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99
1

Watco SGBLK Safety Grip Black 5m2

Watco SGBLK Safety Grip Black 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99
1

Watco Safety Grip Mid Grey 5m2

Watco Safety Grip Mid Grey 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99
1

Watco Concrete Sealer Water Based 5L

Watco Concrete Sealer Water Based 5L

Images for illustration purposes onlyWatco Concrete Sealer Water Based seals and hardens new and old bare, porous concrete floors and screeds. It is micro-porous which allows the surface to breathe.Watco Concrete Sealer Water Based contains a micronised acrylic which penetrates deep into porous surfaces to bind, harden and seal. The cross linking properties of the acrylic dries to form a surface film, providing a more stain resistant, easier to clean finish. The appearance can vary from low sheen to gloss depending upon the porosity of the substrate and the number of coats applied. It is quick and easy to apply and most suited for use in warehouses and production areas, or anywhere which would benefit from a penetrative, dustproof, virtually odourless sealer for medium trafficked areas.Concrete Sealer Water Based is also available in a light grey finish, which both seals and tints the floor at the same time. Concrete Sealer Water Based is breathable, virtually solvent free and safe for use in confined areas. It has an A+ VOC emissions rating with a very low VOC content.Recommended areas of useWarehousesProduction AreasGaragesStorage roomsFeaturesClear, acrylic, water based sealerAlso available in a light grey tinted version to both seal and add colourPenetrates, dustproofs and hardens in just one coatSingle pack sealer easy to applyReady for full use after 24 hoursOnly one coat is generally needed saving on downtimeMinimal darkening effect on most surfacesBreathableVirtually solvent free and low odourGlossy finish stain resistant and easy to keep clean Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 8 hours 6 hours 12 hours 24 hours 20C 6 hours 4 hours 12 hours 24 hours 30C 6 hours 2 hour 12 hours 24 hours Light Traffic: Foot, trolley, pallet truck, occasional forkliftFull use: Regular forklift, heavy footfall, parked vehicles

GBP 104.99
1

Watco Surestep Tiles Black, Pack of 50

Watco Surestep Tiles Black, Pack of 50

Images for illustration purposes onlyYou may need Watco Safety Tape Edge Sealer if the area will get very wet to help stop water penetrating under the adhesive. One tube is sufficient for approximately 60 Watco Surestep Tiles.Recommended areas of useConcreteWoodMetalPainted surfacesFeaturesSelf adhesive: easy to applyIdeal for 6 quarry tiles or similarTough, resin-bonded aluminium oxide provides a long lasting, gritty finishWater resistant pressure sensitive adhesive backingSuitable for industrial and commercial useHelps meet the requirements of the Disability Discrimination Act (DDA) and 2004 Building RegulationsSuitable for internal and external use

GBP 109.99
1

Watco Concrete Sealer Water Based Light Grey, 5LT

Watco Concrete Sealer Water Based Light Grey, 5LT

Images for illustration purposes only Watco Concrete Sealer Water Based seals and hardens new and old bare, porous concrete floors and screeds. It is micro-porous which allows the surface to breathe. Watco Concrete Sealer Water Based contains a micronised acrylic which penetrates deep into porous surfaces to bind, harden and seal. The cross linking properties of the acrylic dries to form a surface film, providing a more stain resistant, easier to clean finish. The appearance can vary from low sheen to gloss depending upon the porosity of the substrate and the number of coats applied. It is quick and easy to apply and most suited for use in warehouses and production areas, or anywhere which would benefit from a penetrative, dustproof, virtually odourless sealer for medium trafficked areas. Concrete Sealer Water Based is also available in a light grey finish, which both seals and tints the floor at the same time. Concrete Sealer Water Based is breathable, virtually solvent free and safe for use in confined areas. It has an A+ VOC emissions rating with a very low VOC content. Recommended areas of use Warehouses Production Areas Garages Storage rooms Features Clear, acrylic, water based sealer Also available in a light grey tinted version to both seal and add colour Penetrates, dustproofs and hardens in just one coat Single pack sealer easy to apply Ready for full use after 24 hours Only one coat is generally needed saving on downtime Minimal darkening effect on most surfaces Breathable Virtually solvent free and low odour Glossy finish stain resistant and easy to keep clean Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 8 hours 6 hours 12 hours 24 hours 20C 6 hours 4 hours 12 hours 24 hours 30C 6 hours 2 hour 12 hours 24 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift Full use: Regular forklift, heavy footfall, parked vehicles

GBP 112.99
1

Watco Toughline White, 1L - TLINEWHI1

Watco Toughline White, 1L - TLINEWHI1

Images for illustration purposes onlyWatco Toughline incorporates the latest polyaspartic resin technology for a high quality, highly wear resistant line marking paint that can be applied as low as -10C.Recommended areas of usePerfect line marker for unheated warehouses, walk in fridges, cold stores and loading baysParticularly useful for exterior applications as it resists chalking, fading, weathering and UV discolourationFeaturesFlexibleUV resistantTakes heavy wear and tearExcellent chemical resistanceCuring times are dependent on site conditions, but the following can be used as a guide:Curing Times 20C 5C 0C -10CRecoatable 4-5 hrs 10-12 hrs 16 hrs 30 hrsLight Traffic 6-8 hrs 18 hrs 24 hrs 36 hrsHeavy Traffic 12 hrs 24 hrs 36 hrs 48 hrs

GBP 94.99
1

Watco Toughline Yellow, 1L - TLINEYEL1

Watco Toughline Yellow, 1L - TLINEYEL1

Images for illustration purposes onlyWatco Toughline incorporates the latest polyaspartic resin technology for a high quality, highly wear resistant line marking paint that can be applied as low as -10C.Recommended areas of usePerfect line marker for unheated warehouses, walk in fridges, cold stores and loading baysParticularly useful for exterior applications as it resists chalking, fading, weathering and UV discolourationFeaturesFlexibleUV resistantTakes heavy wear and tearExcellent chemical resistanceCuring times are dependent on site conditions, but the following can be used as a guide:Curing Times 20C 5C 0C -10CRecoatable 4-5 hrs 10-12 hrs 16 hrs 30 hrsLight Traffic 6-8 hrs 18 hrs 24 hrs 36 hrsHeavy Traffic 12 hrs 24 hrs 36 hrs 48 hrs

GBP 94.99
1

Watco Concrex Coving Mortar 5KG

Watco Concrex Coving Mortar 5KG

Images for illustration purposes onlyA coved skirting helps cleaning by eliminating the dirt trap at the junction of the floor and the wall. Watco Concrex Coving Mortar is specially formulated to make it easier to create coved skirting. Based on the technology of Watco Concrex, this mortar is incredibly tough, chemical and impact resistant, even when applied with feather edges. Designed to be used in conjunction with Watco Tack Coat. Pendulum Slip Test ValuesDry PTV Wet PTV70 Extremely low slip potential 62 Low slip potential Recommended areas of useHygienic environments such as hospitals and food hallsBund areasClean rooms and laboratoriesFeaturesTough two pack epoxy resin formulaCan be feather edgedImpervious, non-dusting, impact and chemical resistantFast curingCures in 3 to 6 hours at 15-20cWatco Tack Coat is recommended for all applications

GBP 133.99
1

Watco Pourable Repair Mortar 25KG

Watco Pourable Repair Mortar 25KG

Images for illustration purposes only Watco Basics Pourable Repair Mortar is a quick and easy way to fill holes in concrete floors. This blended polymer and cement formulation is strong enough to resist heavy foot traffic, trolleys and trucks; (for areas where there is regular forklift traffic, we recommend Watco Flowpatch) Just take as much powder as you need out of the bucket, mix with water and pour you dont need a primer. The mortar will not shrink as it dries and will take foot traffic after only 4 hours and trucks and trolleys after 6-8 hours. The product flows to fill the hole making it unsuitable for ramps, steps or broken concrete edges; please select Watco Concrex (epoxy repair mortar) for this type of repair. Recommended areas of use Damaged, reasonably level concrete Indoors or outdoors Features Just mix with water and pour Takes traffic after only 4 hours Non dusting, resists grease and oil Repairs from 5mm to 100mm in one go

GBP 112.99
1

Watco Concrex Coloured Tile Red 10KG

Watco Concrex Coloured Tile Red 10KG

Images for illustration purposes onlyConcrex Colours is a coloured epoxy resin mortar for a better blend with a coloured floor than sand and cement or Watco Concrex. The ideal choice for repairs to floors, steps and ramps for heavy traffic. It can also be used as a coloured screed to provide an attractive, virtually indestructible floor surface. Compared with other repair mortars this formulation is particularly rich in epoxy resin. This provides superior strength and adhesion, making it ideal for very thin section, feather edge or intricate repairs.Recommended areas of useSuitable for use inside and outConcrete, sand and cement, metalHoles in concrete floorsDamaged stepsBroken floor jointsEroded, uneven concreteFeaturesCures to a granite-hard finish - virtually indestructibleProvides excellent chemical resistance and anti slip propertiesWatco Tack Coat primer is essential for shall applications and screedingImpervious and non-dustingConcrex Colours cures in 5-6 hours at ambient temperatures, ready for heavy traffic in 8-12 hoursAvailable in 10kg and 25kg packsMay be feather-edged

GBP 159.99
1

Watco Concrex Coloured Blue 10KG

Watco Concrex Coloured Blue 10KG

Images for illustration purposes onlyConcrex Colours is a coloured epoxy resin mortar for a better blend with a coloured floor than sand and cement or Watco Concrex. The ideal choice for repairs to floors, steps and ramps for heavy traffic. It can also be used as a coloured screed to provide an attractive, virtually indestructible floor surface. Compared with other repair mortars this formulation is particularly rich in epoxy resin. This provides superior strength and adhesion, making it ideal for very thin section, feather edge or intricate repairs.Recommended areas of useSuitable for use inside and outConcrete, sand and cement, metalHoles in concrete floorsDamaged stepsBroken floor jointsEroded, uneven concreteFeaturesCures to a granite-hard finish - virtually indestructibleProvides excellent chemical resistance and anti slip propertiesWatco Tack Coat primer is essential for shall applications and screedingImpervious and non-dustingConcrex Colours cures in 5-6 hours at ambient temperatures, ready for heavy traffic in 8-12 hoursAvailable in 10kg and 25kg packsMay be feather-edged

GBP 159.99
1

Watco Concrex Coloured Buff 10KG

Watco Concrex Coloured Buff 10KG

Images for illustration purposes onlyConcrex Colours is a coloured epoxy resin mortar for a better blend with a coloured floor than sand and cement or Watco Concrex. The ideal choice for repairs to floors, steps and ramps for heavy traffic. It can also be used as a coloured screed to provide an attractive, virtually indestructible floor surface. Compared with other repair mortars this formulation is particularly rich in epoxy resin. This provides superior strength and adhesion, making it ideal for very thin section, feather edge or intricate repairs.Recommended areas of useSuitable for use inside and outConcrete, sand and cement, metalHoles in concrete floorsDamaged stepsBroken floor jointsEroded, uneven concreteFeaturesCures to a granite-hard finish - virtually indestructibleProvides excellent chemical resistance and anti slip propertiesWatco Tack Coat primer is essential for shall applications and screedingImpervious and non-dustingConcrex Colours cures in 5-6 hours at ambient temperatures, ready for heavy traffic in 8-12 hoursAvailable in 10kg and 25kg packsMay be feather-edged

GBP 159.99
1

Watco Concrex Coloured Black 10KG

Watco Concrex Coloured Black 10KG

Images for illustration purposes onlyConcrex Colours is a coloured epoxy resin mortar for a better blend with a coloured floor than sand and cement or Watco Concrex. The ideal choice for repairs to floors, steps and ramps for heavy traffic. It can also be used as a coloured screed to provide an attractive, virtually indestructible floor surface. Compared with other repair mortars this formulation is particularly rich in epoxy resin. This provides superior strength and adhesion, making it ideal for very thin section, feather edge or intricate repairs.Recommended areas of useSuitable for use inside and outConcrete, sand and cement, metalHoles in concrete floorsDamaged stepsBroken floor jointsEroded, uneven concreteFeaturesCures to a granite-hard finish - virtually indestructibleProvides excellent chemical resistance and anti slip propertiesWatco Tack Coat primer is essential for shall applications and screedingImpervious and non-dustingConcrex Colours cures in 5-6 hours at ambient temperatures, ready for heavy traffic in 8-12 hoursAvailable in 10kg and 25kg packsMay be feather-edged

GBP 159.99
1

Watco Concrex Coloured Light Grey 10KG

Watco Concrex Coloured Light Grey 10KG

Images for illustration purposes onlyConcrex Colours is a coloured epoxy resin mortar for a better blend with a coloured floor than sand and cement or Watco Concrex. The ideal choice for repairs to floors, steps and ramps for heavy traffic. It can also be used as a coloured screed to provide an attractive, virtually indestructible floor surface. Compared with other repair mortars this formulation is particularly rich in epoxy resin. This provides superior strength and adhesion, making it ideal for very thin section, feather edge or intricate repairs.Recommended areas of useSuitable for use inside and outConcrete, sand and cement, metalHoles in concrete floorsDamaged stepsBroken floor jointsEroded, uneven concreteFeaturesCures to a granite-hard finish - virtually indestructibleProvides excellent chemical resistance and anti slip propertiesWatco Tack Coat primer is essential for shall applications and screedingImpervious and non-dustingConcrex Colours cures in 5-6 hours at ambient temperatures, ready for heavy traffic in 8-12 hoursAvailable in 10kg and 25kg packsMay be feather-edged

GBP 159.99
1

Watco Concrex Coloured Green 10KG

Watco Concrex Coloured Green 10KG

Images for illustration purposes onlyConcrex Colours is a coloured epoxy resin mortar for a better blend with a coloured floor than sand and cement or Watco Concrex. The ideal choice for repairs to floors, steps and ramps for heavy traffic. It can also be used as a coloured screed to provide an attractive, virtually indestructible floor surface. Compared with other repair mortars this formulation is particularly rich in epoxy resin. This provides superior strength and adhesion, making it ideal for very thin section, feather edge or intricate repairs.Recommended areas of useSuitable for use inside and outConcrete, sand and cement, metalHoles in concrete floorsDamaged stepsBroken floor jointsEroded, uneven concreteFeaturesCures to a granite-hard finish - virtually indestructibleProvides excellent chemical resistance and anti slip propertiesWatco Tack Coat primer is essential for shall applications and screedingImpervious and non-dustingConcrex Colours cures in 5-6 hours at ambient temperatures, ready for heavy traffic in 8-12 hoursAvailable in 10kg and 25kg packsMay be feather-edged

GBP 159.99
1

Watco Polyaspartic Primer 2.5L

Watco Polyaspartic Primer 2.5L

Images for illustration purposes only Watco Polyaspartic Primer is a unique, two part resin that has been specially designed prior to using Watcos range of polyaspartic coatings. When applied by roller, Polyaspartic Primer primes and seals very porous or high suction surfaces, such as sand and cement screed, to ensure a uniform finish and help prevent air entrapment bubbles in the subsequent coating. Polyaspartic Primer cures quickly and can be overcoated in 4 hours. This product can also be beneficial when overcoating an existing, well-bonded paint before using a Watco Polyaspartic coating as a top coat. Use with the following Watco products: Cold Set Coating, Fastcoat, Food Safe Coating, Protecta-Coat, Safety Coat Cold Cure and Safety Coat Food Safe. Recommended areas of use Production areas Warehouses Showrooms Workshops Loading bays Cold stores, walk-in fridges and freezers Interior and exterior Features Primes and seals porous, dusty floors prior to painting Can be used at minus 10C to 25C Ready to overcoat in 4 hours Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Curing time (Floor temperature) Recoat time Touch dry -10C 24 hours 16 hours 0C 12 hours 8 hours 10C 6 hours 4 hours 20C 4 hours 2 hours

GBP 159.99
1

Watco Epoxicote High Build Primer 3L

Watco Epoxicote High Build Primer 3L

Images for illustration purposes only Watco Epoxicote High Build Primer is specially designed for use with Watco Epoxicote High Build. Epoxicote High Build is a high performance 100% solids epoxy resin coating, which benefits from the use of this primer on bare concrete surfaces. Use the primer on hard, smooth, power floated concrete which would otherwise reject a paint coating. This eliminates the need for grinding or costly shot blasting. Also use on weaker, porous bare concrete surfaces. If a high build coating such as Watco Epoxicote High Build is applied to a porous unsealed concrete surface, air can become trapped in the coating during application and cure leading to bubbles in the finished floor. This primer prevents this from happening. Recommended areas of use Priming any bare concrete surface before applying Watco Epoxicote High Build Features Primes hard, smooth or power floated concrete ready for painting Seals porous concrete to prevent air entrapment (bubbles) in new paint coating One coat application quick and easy to apply Low odour, two-part, water-based epoxy resin Ready for overcoating with Watco Epoxicote High Build after 12 hours at 20C Curing time Touch dry Overcoating 10C 12 hours 24 hours 20C 6 hours 12 hours

GBP 133.99
1

Watco Spectrum Concrete Floor Paint Telemagenta TR

Watco Spectrum Concrete Floor Paint Telemagenta TR

Images for illustration purposes only Our unique formula is based on a blend of resins and polyurethane, which has produced a Best in Class single pack paint for general use. This attractive, hard-wearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use Production Areas Warehouses Workshops Features Professional quality, single pack polyurethane coating Transforms and dustproofs drab, stained concrete Ideal for identifying production and storage areas and traffic aisles Easy to use and easy to keep clean Superior performance demonstrated by ISO testing to CE mark EN 1504-2 High Gloss, Matt & Anti Slip versions available Available in 190 RAL colours Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 129.99
1

Watco Spectrum Concrete Floor Paint Salmon Pink TR

Watco Spectrum Concrete Floor Paint Salmon Pink TR

Images for illustration purposes only Our unique formula is based on a blend of resins and polyurethane, which has produced a Best in Class single pack paint for general use. This attractive, hard-wearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this Best Ever Formulation to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion. Recommended areas of use Production Areas Warehouses Workshops Features Professional quality, single pack polyurethane coating Transforms and dustproofs drab, stained concrete Ideal for identifying production and storage areas and traffic aisles Easy to use and easy to keep clean Superior performance demonstrated by ISO testing to CE mark EN 1504-2 High Gloss, Matt & Anti Slip versions available Available in 190 RAL colours Curing Times Recoat Time Touch Dry Light Traffic Full Use 10C 24 hours 16 hours 48 hours 72 hours 20C 16 hours 10 hours 24 hours 36 hours 30C 16 hours 6 hour 24 hours 36 hours Light Traffic: Foot, trolley, pallet truck, occasional forklift

GBP 129.99
1