mcb.dk | Få success online

Watco Toughline White, 1L - TLINEWHI1

Images for illustration purposes onlyWatco Toughline incorporates the latest polyaspartic resin technology for a high quality, highly wear resistant line marking paint that can be applied as low as -10C.Recommended areas of usePerfect line marker for unheated warehouses, walk in fridges, cold stores and loading baysParticularly useful for exterior applications as it resists chalking, fading, weathering and UV discolourationFeaturesFlexibleUV resistantTakes heavy wear and tearExcellent chemical resistanceCuring times are dependent on site conditions, but the following can be used as a guide:Curing Times 20C 5C 0C -10CRecoatable 4-5 hrs 10-12 hrs 16 hrs 30 hrsLight Traffic 6-8 hrs 18 hrs 24 hrs 36 hrsHeavy Traffic 12 hrs 24 hrs 36 hrs 48 hrs

GBP 94.99

1

Watco Toughline Yellow, 1L - TLINEYEL1

Images for illustration purposes onlyWatco Toughline incorporates the latest polyaspartic resin technology for a high quality, highly wear resistant line marking paint that can be applied as low as -10C.Recommended areas of usePerfect line marker for unheated warehouses, walk in fridges, cold stores and loading baysParticularly useful for exterior applications as it resists chalking, fading, weathering and UV discolourationFeaturesFlexibleUV resistantTakes heavy wear and tearExcellent chemical resistanceCuring times are dependent on site conditions, but the following can be used as a guide:Curing Times 20C 5C 0C -10CRecoatable 4-5 hrs 10-12 hrs 16 hrs 30 hrsLight Traffic 6-8 hrs 18 hrs 24 hrs 36 hrsHeavy Traffic 12 hrs 24 hrs 36 hrs 48 hrs

GBP 94.99

1

Watco Polyaspartic Primer 2.5L

Images for illustration purposes only Watco Polyaspartic Primer is a unique, two part resin that has been specially designed prior to using Watcos range of polyaspartic coatings. When applied by roller, Polyaspartic Primer primes and seals very porous or high suction surfaces, such as sand and cement screed, to ensure a uniform finish and help prevent air entrapment bubbles in the subsequent coating. Polyaspartic Primer cures quickly and can be overcoated in 4 hours. This product can also be beneficial when overcoating an existing, well-bonded paint before using a Watco Polyaspartic coating as a top coat. Use with the following Watco products: Cold Set Coating, Fastcoat, Food Safe Coating, Protecta-Coat, Safety Coat Cold Cure and Safety Coat Food Safe. Recommended areas of use Production areas Warehouses Showrooms Workshops Loading bays Cold stores, walk-in fridges and freezers Interior and exterior Features Primes and seals porous, dusty floors prior to painting Can be used at minus 10C to 25C Ready to overcoat in 4 hours Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Curing time (Floor temperature) Recoat time Touch dry -10C 24 hours 16 hours 0C 12 hours 8 hours 10C 6 hours 4 hours 20C 4 hours 2 hours

GBP 159.99

1

Watco SGBUF Safety Grip Buff 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99

1

Watco Safety Grip Safety Yellow 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99

1

Watco Safety Grip Safety Blue 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99

1

Watco SGBLK Safety Grip Black 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99

1

Watco Safety Grip Tile Red 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99

1

Watco Safety Grip Mid Grey 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99

1

Watco Safety Grip Light Grey 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99

1

Watco Safety Grip Safety Green 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99

1

DIGITAL MARKETING

Brand

Colour

Size

Merchant

Price (EUR)

Watco Toughline White, 1L - TLINEWHI1

Watco Toughline Yellow, 1L - TLINEYEL1

Watco Polyaspartic Primer 2.5L

Watco SGBUF Safety Grip Buff 5m2

Watco Safety Grip Safety Yellow 5m2

Watco Safety Grip Safety Blue 5m2

Watco SGBLK Safety Grip Black 5m2

Watco Safety Grip Tile Red 5m2

Watco Safety Grip Mid Grey 5m2

Watco Safety Grip Light Grey 5m2

Watco Safety Grip Safety Green 5m2

Powered by Cobiro