274 results (0,21890 seconds)

Show all filters

Brand

Size

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Trend SET/SS35X1/2TC TCT Router Cutter Set, 35 Piece TRESETSS3512

Trend SET/SS35X1/2TC TCT Router Cutter Set, 35 Piece TRESETSS3512

The Trend SET/SS35X1/2TC TCT Router Cutter Set contains a range of popular tungsten carbide tipped cutters for a variety of applications. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in aluminium carry case. Contains: 1 x Single Flute Cutter 3.2 x 12.7mm 5 x Straight Cutters: 6.3 x 19mm, 9.5 x 25mm, 12.7 x 19mm, 12.7 x 25mm and 19 x 19mm 1 x Pierce and Trim Cutter 6.3 x 18mm 1 x 45 V-Groove Cutter 12.7mm 2 x Dovetail Cutters: 12.7mm and 14.3mm 2 x Cove Cutters: R3.2mm and R6.35mm 1 x Long Series Cove Cutter R6.35 x 18mm 5 x Guided Trimmers: 9.5 x 12.7mm, 9.5 x 25mm, 12.7 x 12.7mm, 12.7 x 25mm and 19 x 25mm 1 x Guided 45 Chamfer Cutter 30mm 3 x Guided Round Over Cutters: R6.3mm, R9.5mm and R12.7mm 1 x Guided Ovolo Cutter R12.7mm 1 x Guided Cavetto Cutter R7.9mm 2 x Guided Cove Cutters: R6.3mm and R9.5mm 3 x Guided Groovers: 6.35 x 9.5mm, 7.9 x 9.5mm and 9.5 x 9.5mm Deep 1 x Hinge Recess Straight 12.7 x 12.7mm 2 x Guided Roman Ogees: R4.7mm and R6.35mm 2 x Guided Cutters: R4mm and R6.3mm 1 x Guided Wavy Edge Cutter R4.7mm

GBP 119.99
1

Trend 47/4 1/4" TC Pierce & Trim Cutter 6.3mm

Trend 47/4 1/4" TC Pierce & Trim Cutter 6.3mm

The 1/4in. TC Router Cutter is designed for precision cutting, making it an excellent choice for working with laminate and other thin materials. Engineered for controlled cutting, it ensures clean, sharp edges for a high-quality finish. The innovative piercing tip allows for effortless drilling through materials while running smoothly against the workpiece for fast and efficient trimming. Ideal for professional and DIY applications, this cutter provides accuracy and reliability, helping to achieve precise results with minimal effort. Whether shaping laminate or refining edges, this durable and efficient tool is a must-have for achieving a flawless finish. Features and Benefits Ideal for achieving precise cuts in laminate and other delicate materials Delivers smooth and accurate cuts with well-defined edges Specialised piercing tip allows for effortless entry and efficient trimming Glides along the workpiece to enhance speed and cutting performance Designed for use by professionals and DIY enthusiasts alike Offers dependable precision for consistently excellent outcomes Typical Applications Laminate

GBP 22.99
2

Trend SET/SS31X1/4TC TCT Router Cutter Set, 30 Piece TRESETSS3114

Trend SET/SS31X1/4TC TCT Router Cutter Set, 30 Piece TRESETSS3114

The Trend SET/SS31X1/4TC Router Cutter Set contains a range of popular tungsten carbide tipped cutters for a variety of applications. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in an aluminium carry case. Contains: 9 x Non-bearing Straight Cutters: 5 x 12mm, 6 x 20mm, 8 x 20mm, 10 x 20mm, 12 x 20mm, 14 x 20mm, 16 x 20mm, 18 x 20mm and 20 x 20mm 2 x Non-bearing Core Box Cutters: R3.2mm and R6.35mm 2 x Non-bearing 45 V-Groove Cutters: 9.5mm and 12.7mm 1 x Non-bearing Dovetail Cutter 9.5mm/13mm 1 x Non-bearing Classic Panel Cutter 12.7mm 4 x Guided Round Over Cutters: R3.2mm, R6.3mm, R7.9mm and R9.5mm 4 x Guided Ovolo Cutters: R3.2mm, R6.3mm, R7.9mm and R9.5mm 1 x Guided 45 Chamfer Cutter 31.5mm 1 x Guided 25 Chamfer Cutter 16mm 1 x Guided Trimmer 12.7 x 13mm 2 x Guided Cove Cutters: R6.3mm and 9.5mm 1 x Guided Rebate Cutter 9.5 x 28.6mm 1 x Guided Roman Ogee R4 x 25mm

GBP 109.99
1

Trend C005B 1/4" Tungsten Carbide 2 Flute Router Cutter

Trend C005B 1/4" Tungsten Carbide 2 Flute Router Cutter

This tungsten carbide router cutter has two flute carbide TCT tips, resulting in cleaner cutting edges and very fast clearance of waste in all timber and timber based materials. The cutter has PTFE coating to minimise heat and resin build up, resulting in increased cutter performance and a longer tool lifespan. Features and Benefits Bottom cut feature for increased versatility, including light mortising 1/4in shank for increased control 'K'mark shank to ensure safe working Typical Applications Engraving Grooving Rebating Shallow mortising Softwoods Hardwoods MDF Plywood Chipboard

GBP 11.99
1

Trend Kitchen Worktop Cutter Display of 10 TREDEAL10

Trend Kitchen Worktop Cutter Display of 10 TREDEAL10

Professional TC Worktop Cutter Two flute cutter with a 12.7 mm (1/2in) diameter. TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Advanced automated grinding improves the carbides resistance to wear. Up to 200% longer life when cutting abrasive materials. Cleaner cut than other existing carbides. Final results & life that makes it the most cost effective carbide today. Includes 10 x 383DX12TC Cutters in a gravity dispenser box. Ideal for display on a trade counter or can be hung on a peg.

GBP 399.99
1

Trend C056A x 1/2 TCT Radius Cove Cutter 9.5mm Radius TREC056A12TC

Trend C056A x 1/2 TCT Radius Cove Cutter 9.5mm Radius TREC056A12TC

Trend TCT Radius Cove Cutter with two flutes and carbide TCT tips for a cleaner cut and fast clearance of waste in all timber and timber-based materials. Its PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. Fitted with a 1/2in shank, 'K' marked to ensure safe working practices. Ideal for classic decorative mouldings and edge details. Specification Radius 9.5mm Cutting Depth 12.7mm Shank 1/2in

GBP 43.99
1

Trend C012A x 1/4 TCT Two Flute Cutter 8.0 25.0mm

Trend C012A x 1/4 TCT Two Flute Cutter 8.0 25.0mm

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 17.99
1

Trend C145 x 1/4 TCT Bearing Guided Slotting Cutter 6.3mm

Trend C145 x 1/4 TCT Bearing Guided Slotting Cutter 6.3mm

This Trend Craft Pro C145 1/4in shank Bearing Guided Slotting Cutter has a 31.8mm diameter with two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. The cutter is a fast, easy and accurate way to make slots and grooves in board edges, ideal for fitting panels. The slot dimension is matched to 6.3mm/1/4in thick sheet material with 9.5mm depth of cut. Bearings can be swapped to alter groove depth. It has PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. This Trend Craft Pro has a 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. D: 31.8 mm. C: 1/4 inch. C: 6.3 mm. B: 12.7 mm. E: 9.5 mm

GBP 39.99
1

Trend C220 x 1/4 TCT Intumescent Cutter 15 x 24mm TREC220

Trend C220 x 1/4 TCT Intumescent Cutter 15 x 24mm TREC220

Trend CraftPro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. A bearing guide ensures the correct depth and width is always achieved to meet Fire Regulations. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety K mark insertion indicator on each shank to ensure a quick and easy set up, whether for handheld or table work.

GBP 42.99
1

Trend C007 x 1/4 TCT Two Flute Cutter 6.3 x 19.1mm

Trend C007 x 1/4 TCT Two Flute Cutter 6.3 x 19.1mm

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 14.99
1

Trend C019 x 1/4 TCT Two Flute Cutter 12.0 x 19.1mm

Trend C019 x 1/4 TCT Two Flute Cutter 12.0 x 19.1mm

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 19.99
1

Trend C001 x 1/4 TCT Two Flute Cutter 3.2mm x 9.5mm

Trend C001 x 1/4 TCT Two Flute Cutter 3.2mm x 9.5mm

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 20.99
1

Trend C015 X 1/4 TCT Two Flute Cutter 9.5 X 31.8MM

Trend C015 X 1/4 TCT Two Flute Cutter 9.5 X 31.8MM

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 19.99
1

Trend C013 X 1/4 TCT Two Flute Cutter 9.5 X 19.1MM

Trend C013 X 1/4 TCT Two Flute Cutter 9.5 X 19.1MM

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 17.99
1

Trend C002 x 1/4 TCT Two Flute Cutter 4.0 x 11.1mm TREC00214TC

Trend C002 x 1/4 TCT Two Flute Cutter 4.0 x 11.1mm TREC00214TC

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 19.99
1

Trend C005 x 1/4 TCT Two Flute Cutter 6.0 x 16.0mm TREC00514TC

Trend C005 x 1/4 TCT Two Flute Cutter 6.0 x 16.0mm TREC00514TC

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 15.99
1

Trend C030 x 1/4 TCT Two Flute Cutter 19.1 x 25.4mm TREC03014TC

Trend C030 x 1/4 TCT Two Flute Cutter 19.1 x 25.4mm TREC03014TC

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 24.99
1

Trend C022 x 1/4 TCT Two Flute Cutter 12.7 x 31.8mm TREC02214TC

Trend C022 x 1/4 TCT Two Flute Cutter 12.7 x 31.8mm TREC02214TC

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 24.99
1