83 results (0,21530 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Trend C056A x 1/2 TCT Radius Cove Cutter 9.5mm Radius TREC056A12TC

Trend C056A x 1/2 TCT Radius Cove Cutter 9.5mm Radius TREC056A12TC

Trend TCT Radius Cove Cutter with two flutes and carbide TCT tips for a cleaner cut and fast clearance of waste in all timber and timber-based materials. Its PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. Fitted with a 1/2in shank, 'K' marked to ensure safe working practices. Ideal for classic decorative mouldings and edge details. Specification Radius 9.5mm Cutting Depth 12.7mm Shank 1/2in

GBP 43.99
1

Trend Two Flute Cutter, 25mm Diameter

Trend Two Flute Cutter, 25mm Diameter

This high-performance two-flute cutter is designed for precision cutting in abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Featuring a TCT plunge centre tip, it delivers clean, accurate cuts with a smooth finish. Features and Benefits Tungsten Carbide Tipped (TCT) for durability and longevity Two-flute design ensures a clean, smooth finish Ideal for cutting chipboard, MDF, plywood, hardwoods and plastics 25mm diameter with a 1/4-inch shank for controlled operation Precision plunge centre tip for enhanced accuracy

GBP 46.99
2

Trend C078 x 1/4 TC Round Over Two Flute Cutter 9.5 x 15.9mm TREC07814TC

Trend C078 x 1/4 TC Round Over Two Flute Cutter 9.5 x 15.9mm TREC07814TC

The Trend CraftPro Round Over Cutter leaves perfect, superfine, round over detail for a contemporary, eased edge arris profile on straight and curved edges. With two carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. A PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers, 'K' marked to ensure safe working practices. Supplied with two bearings for Round Over or Quirked Ovolo moulding for additional options for fine detailing on boxes and model making work.

GBP 50.99
1

Trend Set/SS8X1/4TC - 12 Piece Cutter Set (1/4" Shank)

Trend Set/SS8X1/4TC - 12 Piece Cutter Set (1/4" Shank)

This twelve piece cutter set contains a range of the most widely used cutters for decorative woodworking. An Ideal Starter Set. CONTENTS 2x Straight 1/4" & 1/2". 1x Dovetail 104 x 1/2". 2x Guided Round Over Radius 6.35mm & 9.5mm. 1x Guided Chamfer 45. 1x Guided Rebater 9.5mm Rebate. 1x Guided Trimmer 2.7mm. 1x Guided Cove Radius 6.3mm. 1x 'V' Groove 45. 1x Core Box Radius 6.35mm. 1x Guided Ogee Radius 4mm. Supplied in Plastic Carry Case.

GBP 49.99
1

Trend C153/3 Kitchen Worktop Cutter (3 Pack) TREC1533

Trend C153/3 Kitchen Worktop Cutter (3 Pack) TREC1533

The Trend C153/3 CraftPro Kitchen Worktop Cutter is suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Ideal for kitchen fitting, 50mm cutting length for worktops up to 40mm thick. With a 'K' marked shank for correct insertion depth, providing safer routing. It has premium Tungsten Carbide cutting edges, ideal for use in solid timber and abrasive chipboard core worktops. With a bottom cut feature for plunge cut, slotting and morticing applications. The two flutes have highly ground tip faces, for a superior cutting performance and chip clearance. Its PTFE coated body reduces friction, heat and resin build-up for a longer lifespan. Specification Diameter 12.7mm Cutting Depth 50mm Shank 1/2in

GBP 59.99
1

Trend 46/93 1/4" TC Bearing Guided Ovolo Cutter

Trend 46/93 1/4" TC Bearing Guided Ovolo Cutter

Ovolo and rounding over cutters without bearing guides are chosen for panel work and edge moulding. Bearing guided cutters are ideal for curved work. All can be used on natural timbers, man-made particle and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table-tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Self Guided cutters for rounding over edges, without the need for a side fence. If cutter is lowered a top quirk can be produced. Bull nose moulding can also be produced by taking a second pass from the opposite side of the workpiece. (D= Cutting Diameter, C= Length of Cut, R= Radius)

GBP 59.99
1