mcb.dk | Få success online

System Sensor M200G-RF-26 Agile Gateway

System Sensor M200G-RF-26 Agile GatewayLoop-powered Gateway device for System Sensor Agile wireless system. Up to 8 Gateways may be used on the same loop. This requires a B501AP base. Compatible with DXc panels only.The System Sensor M200G-RF is a loop powered gateway unit from the Agile range of wireless fire system equipment. This device is designed to communicate with the System Sensor Agile range of wireless fire system devices.The Agile wireless platform is powered by robust mesh network technology providing up to two communication paths to each wireless device. This makes the network highly reliable protecting against broken communication links. Mesh network technology enables flexible and economic installations in a wide variety of building footprints.Key FeaturesRequires a B501AP basePlease NoteThis panel is compatible with the Morley System Sensor DXc panel range only.

GBP 289.18

1

System Sensor Agile Wireless White Wall Mounted Addressable Sounder WSO-WW-RF

System Sensor Agile Wireless White Wall Mounted Addressable Sounder WSO-WW-RFThe WSO-WW-RF radio wall-mounted sounder is a battery operated RF device designed for use with the M200G-RF radio gateway part of the Series 200 RF range running on an addressable fire system using a compatible proprietary communication protocol.It is a two stage sounder module combined with a wireless RF transceiver that fits into a standard B501RF wireless base. The appropriate volume and tone settings are selected by special application software AgileIQ. The 2nd stage tone related to the 1st stage tone is controlled by the fire panel via the RF Gateway. This device conforms to EN54-3 and EN54-25. It complies with the requirements of 201453EU for conformance with the RED directive.

GBP 244.42

1

System Sensor Agile Wireless Red Wall Mounted Addressable Sounder WSO-RR-RF

System Sensor Agile Wireless Red Wall Mounted Addressable Sounder WSO-RR-RFThe WSO-RR-RF radio wall-mounted sounder is a battery operated RF device designed for use with the M200G-RF radio gateway part of the Series 200 RF range running on an addressable fire system using a compatible proprietary communication protocol. It is a two stage sounder module combined with a wireless RF transceiver that fits into a standard B501RF wireless base.The appropriate volume and tone settings are selected by special application software AgileIQ. The 2nd stage tone related to the 1st stage tone is controlled by the fire panel via the RF Gateway. This device conforms to EN54-3 and EN54-25. It complies with the requirements of 201453EU for conformance with the RED directive.

GBP 230.65

1

System Sensor WSS-PR-N00 Wall Mounted Sounder VID - White Skirt

System Sensor WSS-PR-N00 Wall Mounted Sounder VID - White SkirtThe sounder VID visual indicating device utilises the System Sensor B501AP base for improved installation flexibility. When triggered by the fire panel its powerful sounder and intense strobe give a visible and audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesThis product is not EN54-23 approved so cant be used as a VADEN54-3 approvedLarge cable accessRear or surface cable entryLoop continuity springAutomatic synchronisation of sounder and strobeCommon base with detectors B501APDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many markets on device or from panelPositive poke yoke engagementAddress tag for clear indicationAnti-tamper featureIn-built isolation optionsSimple familiar rotary wheel address controls

GBP 86.93

1

System Sensor M200XE Loop Isolation Module

System Sensor M200XE Loop Isolation ModuleThere is a large number of System Sensor intelligent fire alarm systems the address loop with a recipient device up to 198 is protected by a single one loop interruption but in the case of loop short circuit the entire loop it may become inoperable. With the M200XE modules shorting is not desired can be reduced.Only a small part of the system falls out if the loop is broken down into isolators because in the case of a possible loop only the two isolators will not be available to the control panel. If the address loop voltage drops below 7V the isolator module - with FET on the branch breaks it off the loop in the non-short-term part of the address loop the assets remain operational. If the breakdown the loop voltage rises on one side of the module then the separated short-circuit loop section 3 mA max. 15 mA control current flows through the module.In isolation the address loop wires between min. 2.2 kOhm resistance. The isolated state is maintained until the voltage of the disconnected section is 7V the short-circuit or the abnormally high current consumption ceases to exist. After the termination of the termination the isolator disengages the loop automatically.The two-colour LED on the module flashes green in the normal state of the loop every 3 seconds. If the module on any side it detects a short-circuit it illuminates with continuous yellow light during the shutter. The M200XE module in the M200E-SMB mounting box is wall-mounted with the M200E-DIN clip directly on the DIN rail M200E-PMB clip can be mounted in the fire panels box.

GBP 55.08

1

System Sensor WSS-PR-N00 Wall Mounted Sounder VID Red Body with Red Flash

System Sensor WSS-PR-N00 Wall Mounted Sounder VID Red Body with Red FlashThe sounder VID visual indicating device utilises the System Sensor B501AP base for improved installation flexibility. When triggered by the fire panel its powerful sounder and intense strobe give a visible and audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesThis product is not EN54-23 approved so cant be used as a VADEN54-3 approvedLarge cable accessRear or surface cable entryLoop continuity springAutomatic synchronisation of sounder and strobeCommon base with detectors B501APDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many markets on device or from panelPositive poke yoke engagementAddress tag for clear indicationAnti-tamper featureIn-built isolation optionsSimple familiar rotary wheel address controls

GBP 75.79

1

System Sensor M501MEA Mini Input Module

System Sensor M501MEA Mini Input ModuleThe M501MEA is an addressable input module. It will interface with contact devices such as security contacts waterflow switches and call points. It is capable of being collected in Class B wiring configurations. It provides a two-wire initiation circuit for normally open contact fire alarm and security devices. In addition to transmitting the supervised state of the monitored device normal open or short the full analogue supervision measurement is sent back to the panel.The compact size allows it to fit inside devices or conjunction boxes behind devices. Its size and lightweight allows it to be installed without the need to be rigidly mounted. When the proprietary Series 200 Advanced Protocol is enabled a number of features become available namely the advanced feature to determine alarms or troubles in a reduced time. An extended 3-year warranty covers all System Sensor products.

GBP 58.52

1

System Sensor WSF-RR-RF Wall Mounted Addressable Wireless VAD - RedRed

System Sensor WSF-RR-RF Wall Mounted Addressable Wireless VAD - RedRedThe Agile Wireless Sounder Strobe forms part of the Agile range of products that cover a wide range of applications where wiring is undesired.The Agile Wireless Fire Detection System is a newly designed platform of wireless fire devices suitable for all applications where wired fire devices cannot be installed for economic or aesthetic reasons. The new wireless platform is powered by robust MESH network technology providing REDUNDANT communication paths to each wireless device. This makes the network highly reliable protecting against broken communication links. All operations for the design configuration and diagnostics of the systems are greatly simplified thanks to the AgileIQ software suite specifically designed to support AGILE throughout the whole lifecycle of the product.Key FeaturesMesh multiple communication paths for increased reliabilityEN54-23 VAD approvedLight coverage W-3.5-1005 Hz Red Flashing VAD with up to 350mc of coverageConsistent sound performance like wired sounder 100dBA max SPL32 user selectable tones through Agile IQDynamic tone selection through Advanced protocol commandsIP21 protection from water and dust entrance18RF channels at 868MHz provides greater tolerance to interference2 integrated antennas on each wireless fire device easier positioning of devicesUp to 400 m free air communication range providing good coverage levelsAverage 5 year battery service life reducing maintenance requirementsAddresses set using rotary switches reduced commissioning timeTamper-resist locking mechanism to prevent unauthorised removal of device from its baseWired fire devices look and feel easier installation and visual integrationPatented battery service life prediction feature more proactive maintenancePeace of mind battery redundancy delivering always on performanceUp to 32 Wireless devices per GatewayAgile IQ 3-in-1 software for easy design configuration and diagnostics

GBP 297.43

1

System Sensor WSF-WR-RF Wall Mounted Addressable Wireless VAD - WhiteRed

System Sensor WSF-WR-RF Wall Mounted Addressable Wireless VAD - WhiteRedThe Agile Wireless Sounder Strobe forms part of the Agile range of products that cover a wide range of applications where wiring is undesired.The Agile Wireless Fire Detection System is a newly designed platform of wireless fire devices suitable for all applications where wired fire devices cannot be installed for economic or aesthetic reasons. The new wireless platform is powered by robust MESH network technology providing REDUNDANT communication paths to each wireless device. This makes the network highly reliable protecting against broken communication links. All operations for the design configuration and diagnostics of the systems are greatly simplified thanks to the AgileIQ software suite specifically designed to support AGILE throughout the whole lifecycle of the product.Key FeaturesMesh multiple communication paths for increased reliabilityEN54-23 VAD approvedLight coverage W-3.5-1005 Hz Red Flashing VAD with up to 350mc of coverageConsistent sound performance like wired sounder 100dBA max SPL32 user selectable tones through Agile IQDynamic tone selection through Advanced protocol commandsIP21 protection from water and dust entrance18RF channels at 868MHz provides greater tolerance to interference2 integrated antennas on each wireless fire device easier positioning of devicesUp to 400 m free air communication range providing good coverage levelsAverage 5 year battery service life reducing maintenance requirementsAddresses set using rotary switches reduced commissioning timeTamper-resist locking mechanism to prevent unauthorised removal of device from its baseWired fire devices look and feel easier installation and visual integrationPatented battery service life prediction feature more proactive maintenancePeace of mind battery redundancy delivering always on performanceUp to 32 Wireless devices per GatewayAgile IQ 3-in-1 software for easy design configuration and diagnostics

GBP 297.43

1

DIGITAL MARKETING

Brand

Merchant

Price (EUR)