mcb.dk | Få success online

PolyX PVC Sheet End Closure - 16mmm x 2.1mtr Brown

The PolyX Sheet End Closure is pushed on to the eaves end of the polycarbonate sheet in order to tidy up the appearance at the eaves.The closure is used after the anti-dust breather tape has been applied which also makes the sheet weather resistant.The closure itself incorporates a moulded lip at the bottom edge of the profile which diverts the rainwater away from the sheet and into the gutter.Available in white and brown and available for 10mm, 16mm, 25mm and 35mm sheets.

GBP 9.60

1

PolyX PVC Sheet End Closure - 25mm x 2.1mtr White

The PolyX Sheet End Closure is pushed on to the eaves end of the polycarbonate sheet in order to tidy up the appearance at the eaves.The closure is used after the anti-dust breather tape has been applied which also makes the sheet weather resistant.The closure itself incorporates a moulded lip at the bottom edge of the profile which diverts the rainwater away from the sheet and into the gutter.Available in white and brown and available for 10mm, 16mm, 25mm and 35mm sheets.

GBP 10.25

1

PolyX PVC Sheet End Closure - 10mm x 2.1mtr White

The PolyX Sheet End Closure is pushed on to the eaves end of the polycarbonate sheet in order to tidy up the appearance at the eaves.The closure is used after the anti-dust breather tape has been applied which also makes the sheet weather resistant.The closure itself incorporates a moulded lip at the bottom edge of the profile which diverts the rainwater away from the sheet and into the gutter.Available in white and brown and available for 10mm, 16mm, 25mm and 35mm sheets.

GBP 8.98

1

PolyX PVC Sheet End Closure - 16mmm x 2.1mtr White

The PolyX Sheet End Closure is pushed on to the eaves end of the polycarbonate sheet in order to tidy up the appearance at the eaves.The closure is used after the anti-dust breather tape has been applied which also makes the sheet weather resistant.The closure itself incorporates a moulded lip at the bottom edge of the profile which diverts the rainwater away from the sheet and into the gutter.Available in white and brown and available for 10mm, 16mm, 25mm and 35mm sheets.

GBP 10.30

1

PolyX PVC Sheet End Closure - 35mm x 2.1mtr Brown

The PolyX Sheet End Closure is pushed on to the eaves end of the polycarbonate sheet in order to tidy up the appearance at the eaves.The closure is used after the anti-dust breather tape has been applied which also makes the sheet weather resistant.The closure itself incorporates a moulded lip at the bottom edge of the profile which diverts the rainwater away from the sheet and into the gutter.Available in white and brown and available for 10mm, 16mm, 25mm and 35mm sheets.

GBP 11.54

1

PolyX PVC Sheet End Closure - 35mm x 2.1mtr White

The PolyX Sheet End Closure is pushed on to the eaves end of the polycarbonate sheet in order to tidy up the appearance at the eaves.The closure is used after the anti-dust breather tape has been applied which also makes the sheet weather resistant.The closure itself incorporates a moulded lip at the bottom edge of the profile which diverts the rainwater away from the sheet and into the gutter.Available in white and brown and available for 10mm, 16mm, 25mm and 35mm sheets.

GBP 11.54

1

PolyX PVC Sheet End Closure - 25mm x 2.1mtr Brown

The PolyX Sheet End Closure is pushed on to the eaves end of the polycarbonate sheet in order to tidy up the appearance at the eaves.The closure is used after the anti-dust breather tape has been applied which also makes the sheet weather resistant.The closure itself incorporates a moulded lip at the bottom edge of the profile which diverts the rainwater away from the sheet and into the gutter.Available in white and brown and available for 10mm, 16mm, 25mm and 35mm sheets.

GBP 10.26

1

PolyX PVC Sheet End Closure - 10mm x 2.1mtr Brown

The PolyX Sheet End Closure is pushed on to the eaves end of the polycarbonate sheet in order to tidy up the appearance at the eaves.The closure is used after the anti-dust breather tape has been applied which also makes the sheet weather resistant.The closure itself incorporates a moulded lip at the bottom edge of the profile which diverts the rainwater away from the sheet and into the gutter.Available in white and brown and available for 10mm, 16mm, 25mm and 35mm sheets.

GBP 8.98

1

PolyX Rafter Bar End Bar Self Supported - 2.5mtr White

Our PolyX Rafter Bar (End Bar) for a Self Support System is used to finish polycarbonate sheeting.The end bar includes an adjustable adaptor to finish off the edge of the roof without the need for an additional F section or closer.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position.

GBP 94.63

1

PolyX Rafter Bar End Bar Self Supported - 6mtr White

Our PolyX Rafter Bar (End Bar) for a Self Support System is used to finish polycarbonate sheeting.The end bar includes an adjustable adaptor to finish off the edge of the roof without the need for an additional F section or closer.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position.

GBP 234.55

1

PolyX Rafter Bar End Bar Self Supported - 3mtr White

Our PolyX Rafter Bar (End Bar) for a Self Support System is used to finish polycarbonate sheeting.The end bar includes an adjustable adaptor to finish off the edge of the roof without the need for an additional F section or closer.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position.

GBP 113.47

1

PolyX Rafter Bar End Bar Self Supported - 3.5mtr White

Our PolyX Rafter Bar (End Bar) for a Self Support System is used to finish polycarbonate sheeting.The end bar includes an adjustable adaptor to finish off the edge of the roof without the need for an additional F section or closer.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position.

GBP 132.41

1

PolyX Rafter Bar End Bar Self Supported - 4mtr White

Our PolyX Rafter Bar (End Bar) for a Self Support System is used to finish polycarbonate sheeting.The end bar includes an adjustable adaptor to finish off the edge of the roof without the need for an additional F section or closer.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position.

GBP 170.59

1

Standard Composite Cladding Starter Clips - Pack Of 20

Starter clips are used in a cladding installation to secure the beginning and end of your run of cladding to the frame.

GBP 16.64

1

PolyX Rafter Bar Intermediate Bar Self Supported - 6mtr White

Our PolyX Rafter Bar (Intermediate) for a Self Support System is used to join and support two polycarbonate sheets - fixing to a wall plate at one end and eaves beam at the other.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position. Each bar comes complete with one end cap.

GBP 174.26

1

PolyX Rafter Bar Intermediate Bar Self Supported - 3.5mtr White

Our PolyX Rafter Bar (Intermediate) for a Self Support System is used to join and support two polycarbonate sheets - fixing to a wall plate at one end and eaves beam at the other.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position. Each bar comes complete with one end cap.

GBP 101.65

1

PolyX Rafter Bar Intermediate Bar Self Supported - 2mtr White

Our PolyX Rafter Bar (Intermediate) for a Self Support System is used to join and support two polycarbonate sheets - fixing to a wall plate at one end and eaves beam at the other.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position. Each bar comes complete with one end cap.

GBP 45.06

1

PolyX Rafter Bar Intermediate Bar Self Supported - 3mtr White

Our PolyX Rafter Bar (Intermediate) for a Self Support System is used to join and support two polycarbonate sheets - fixing to a wall plate at one end and eaves beam at the other.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position. Each bar comes complete with one end cap.

GBP 67.73

1

PolyX Rafter Bar Intermediate Bar Self Supported - 2.5mtr White

Our PolyX Rafter Bar (Intermediate) for a Self Support System is used to join and support two polycarbonate sheets - fixing to a wall plate at one end and eaves beam at the other.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position. Each bar comes complete with one end cap.

GBP 56.42

1

PolyX Rafter Bar Intermediate Bar Self Supported - 4mtr White

Our PolyX Rafter Bar (Intermediate) for a Self Support System is used to join and support two polycarbonate sheets - fixing to a wall plate at one end and eaves beam at the other.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position. Each bar comes complete with one end cap.

GBP 118.54

1