253 results (0,20775 seconds)

Show all filters

Brand

Size

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Sandvik Coromant DDJNL 3232P 11 Toolholder

Sandvik Coromant DDJNL 3232P 11 Toolholder

DDJNL/R T-Max P Shank Tool For Turning Sandvik CBN holders deliver: High -productivity, high-quality finish turning of case-hardened steel surfaces. HPT is mainly to be found in transmissions components ? axles, shafts and gears in case hardened steels. These opportunities are found in Automotive as well as heavy equipment, wind power and mechanical engineering. The purpose is often to replace grinding with HPT and produce surface finishes with a quality level as ground.

GBP 139.99
1

Sandvik Coromant DWLNR 3225P 06 Shank Tool

Sandvik Coromant DWLNR 3225P 06 Shank Tool

DWLNL/R T-Max P Shank Tool For Turning Sandvik CBN holders deliver: High -productivity, high-quality finish turning of case-hardened steel surfaces. HPT is mainly to be found in transmissions components ? axles, shafts and gears in case hardened steels. These opportunities are found in Automotive as well as heavy equipment, wind power and mechanical engineering. The purpose is often to replace grinding with HPT and produce surface finishes with a quality level as ground.

GBP 111.99
1

Sandvik Coromant DWLNR 4040S 08 Toolholder

Sandvik Coromant DWLNR 4040S 08 Toolholder

DWLNL/R T-Max P Shank Tool For Turning Sandvik CBN holders deliver: High -productivity, high-quality finish turning of case-hardened steel surfaces. HPT is mainly to be found in transmissions components ? axles, shafts and gears in case hardened steels. These opportunities are found in Automotive as well as heavy equipment, wind power and mechanical engineering. The purpose is often to replace grinding with HPT and produce surface finishes with a quality level as ground.

GBP 179.99
1

Sandvik Coromant DDJNL 3225P 15-2 Tool Holder

Sandvik Coromant DDJNL 3225P 15-2 Tool Holder

DDJNL/R T-Max P Shank Tool For Turning Sandvik CBN holders deliver: High -productivity, high-quality finish turning of case-hardened steel surfaces. HPT is mainly to be found in transmissions components ? axles, shafts and gears in case hardened steels. These opportunities are found in Automotive as well as heavy equipment, wind power and mechanical engineering. The purpose is often to replace grinding with HPT and produce surface finishes with a quality level as ground.

GBP 153.99
1

Sandvik Coromant DDJNR 3232P 11 Toolholder

Sandvik Coromant DDJNR 3232P 11 Toolholder

DDJNL/R T-Max P Shank Tool For Turning Sandvik CBN holders deliver: High -productivity, high-quality finish turning of case-hardened steel surfaces. HPT is mainly to be found in transmissions components ? axles, shafts and gears in case hardened steels. These opportunities are found in Automotive as well as heavy equipment, wind power and mechanical engineering. The purpose is often to replace grinding with HPT and produce surface finishes with a quality level as ground.

GBP 139.99
1

Sandvik Coromant DDJNL 3225P 11 Toolholder

Sandvik Coromant DDJNL 3225P 11 Toolholder

DDJNL/R T-Max P Shank Tool For Turning Sandvik CBN holders deliver: High -productivity, high-quality finish turning of case-hardened steel surfaces. HPT is mainly to be found in transmissions components ? axles, shafts and gears in case hardened steels. These opportunities are found in Automotive as well as heavy equipment, wind power and mechanical engineering. The purpose is often to replace grinding with HPT and produce surface finishes with a quality level as ground.

GBP 114.99
1

Sandvik Coromant DDJNR 3225P 15-2 Tool Holder

Sandvik Coromant DDJNR 3225P 15-2 Tool Holder

DDJNL/R T-Max P Shank Tool For Turning Sandvik CBN holders deliver: High -productivity, high-quality finish turning of case-hardened steel surfaces. HPT is mainly to be found in transmissions components ? axles, shafts and gears in case hardened steels. These opportunities are found in Automotive as well as heavy equipment, wind power and mechanical engineering. The purpose is often to replace grinding with HPT and produce surface finishes with a quality level as ground.

GBP 153.99
1

Sandvik Coromant DWLNL 3225P 06 Shank Tool

Sandvik Coromant DWLNL 3225P 06 Shank Tool

DWLNL/R T-Max P Shank Tool For Turning Sandvik CBN holders deliver: High -productivity, high-quality finish turning of case-hardened steel surfaces. HPT is mainly to be found in transmissions components ? axles, shafts and gears in case hardened steels. These opportunities are found in Automotive as well as heavy equipment, wind power and mechanical engineering. The purpose is often to replace grinding with HPT and produce surface finishes with a quality level as ground.

GBP 111.99
1

Sandvik Coromant DWLNL 4040S 08 Toolholder

Sandvik Coromant DWLNL 4040S 08 Toolholder

DWLNL/R T-Max P Shank Tool For Turning Sandvik CBN holders deliver: High -productivity, high-quality finish turning of case-hardened steel surfaces. HPT is mainly to be found in transmissions components ? axles, shafts and gears in case hardened steels. These opportunities are found in Automotive as well as heavy equipment, wind power and mechanical engineering. The purpose is often to replace grinding with HPT and produce surface finishes with a quality level as ground.

GBP 179.99
1

Sandvik Coromant DDJNR 3225P 11 Toolholder

Sandvik Coromant DDJNR 3225P 11 Toolholder

DDJNL/R T-Max P Shank Tool For Turning Sandvik CBN holders deliver: High -productivity, high-quality finish turning of case-hardened steel surfaces. HPT is mainly to be found in transmissions components ? axles, shafts and gears in case hardened steels. These opportunities are found in Automotive as well as heavy equipment, wind power and mechanical engineering. The purpose is often to replace grinding with HPT and produce surface finishes with a quality level as ground.

GBP 114.99
1

Sandvik Coromant R365-063C6-S15M Face Mill

Sandvik Coromant R365-063C6-S15M Face Mill

Product Range: CoroMill 365CoroMill 365 is the essential tool for rough to semi-finish face milling of cast iron and steel components. Use the tool for large series production and applications where high metal removal rate is critical. First choice for roughing to semi-finishing in cast iron.Benefits- Inserts with ability to machine down to AP = 6 mm (0.236 inch)- Unique design with eight true cutting edges for high productivity machining to achieve low cost per component- Multi-edge self-located insert provides robust and reliable machining- The higher density of inserts in the cutter body means that higher table feeds can be implemented to give exceptional manufacturing economyFeatures- Coromant Capto coupling or Arbor mounted- Through coolant design- Right- or left-hand insert design available- Geometry and grade laser marked on the insert for easy identification- Wiper inserts for improved surface finishApplication- Face milling cutter developed for machining in ISO K material, but also works well in ISO P and ISO H materials- Diameter range: 40250 mm (1.5010.0 inch), 160500 mm (12.018.0 inch) (Wedge clamp)

GBP 639.99
1

Sandvik Coromant CoroMill 365 Face Milling Cutter RA365-051C5-S15M

Sandvik Coromant CoroMill 365 Face Milling Cutter RA365-051C5-S15M

Product Range: CoroMill 365CoroMill 365 is the essential tool for rough to semi-finish face milling of cast iron and steel components. Use the tool for large series production and applications where high metal removal rate is critical. First choice for roughing to semi-finishing in cast iron.Benefits- Inserts with ability to machine down to AP = 6 mm (0.236 inch)- Unique design with eight true cutting edges for high productivity machining to achieve low cost per component- Multi-edge self-located insert provides robust and reliable machining- The higher density of inserts in the cutter body means that higher table feeds can be implemented to give exceptional manufacturing economyFeatures- Coromant Capto coupling or Arbor mounted- Through coolant design- Right- or left-hand insert design available- Geometry and grade laser marked on the insert for easy identification- Wiper inserts for improved surface finishApplication- Face milling cutter developed for machining in ISO K material, but also works well in ISO P and ISO H materials- Diameter range: 40250 mm (1.5010.0 inch), 160500 mm (12.018.0 inch) (Wedge clamp)

GBP 699.99
1

Sandvik Coromant R365-080Q27-W15H Face Mill

Sandvik Coromant R365-080Q27-W15H Face Mill

Product Range: CoroMill 365CoroMill 365 is the essential tool for rough to semi-finish face milling of cast iron and steel components. Use the tool for large series production and applications where high metal removal rate is critical. First choice for roughing to semi-finishing in cast iron.Benefits- Inserts with ability to machine down to AP = 6 mm (0.236 inch)- Unique design with eight true cutting edges for high productivity machining to achieve low cost per component- Multi-edge self-located insert provides robust and reliable machining- The higher density of inserts in the cutter body means that higher table feeds can be implemented to give exceptional manufacturing economyFeatures- Coromant Capto coupling or Arbor mounted- Through coolant design- Right- or left-hand insert design available- Geometry and grade laser marked on the insert for easy identification- Wiper inserts for improved surface finishApplication- Face milling cutter developed for machining in ISO K material, but also works well in ISO P and ISO H materials- Diameter range: 40250 mm (1.5010.0 inch), 160500 mm (12.018.0 inch) (Wedge clamp)

GBP 919.99
1

10x Sandvik Coromant R365-1505ZNE-KM Insert Grade K20D

10x Sandvik Coromant R365-1505ZNE-KM Insert Grade K20D

Product Range: CoroMill 365CoroMill 365 is the essential tool for rough to semi-finish face milling of cast iron and steel components. Use the tool for large series production and applications where high metal removal rate is critical. First choice for roughing to semi-finishing in cast iron.Benefits- Inserts with ability to machine down to AP = 6 mm (0.236 inch)- Unique design with eight true cutting edges for high productivity machining to achieve low cost per component- Multi-edge self-located insert provides robust and reliable machining- The higher density of inserts in the cutter body means that higher table feeds can be implemented to give exceptional manufacturing economyFeatures- Coromant Capto coupling or Arbor mounted- Through coolant design- Right- or left-hand insert design available- Geometry and grade laser marked on the insert for easy identification- Wiper inserts for improved surface finishApplication- Face milling cutter developed for machining in ISO K material, but also works well in ISO P and ISO H materials- Diameter range: 40250 mm (1.5010.0 inch), 160500 mm (12.018.0 inch) (Wedge clamp)

GBP 239.90
1

10x Sandvik Coromant L365-1505ZNE-KL Insert Grade 3330

10x Sandvik Coromant L365-1505ZNE-KL Insert Grade 3330

Product Range: CoroMill 365CoroMill 365 is the essential tool for rough to semi-finish face milling of cast iron and steel components. Use the tool for large series production and applications where high metal removal rate is critical. First choice for roughing to semi-finishing in cast iron.Benefits- Inserts with ability to machine down to AP = 6 mm (0.236 inch)- Unique design with eight true cutting edges for high productivity machining to achieve low cost per component- Multi-edge self-located insert provides robust and reliable machining- The higher density of inserts in the cutter body means that higher table feeds can be implemented to give exceptional manufacturing economyFeatures- Coromant Capto coupling or Arbor mounted- Through coolant design- Right- or left-hand insert design available- Geometry and grade laser marked on the insert for easy identification- Wiper inserts for improved surface finishApplication- Face milling cutter developed for machining in ISO K material, but also works well in ISO P and ISO H materials- Diameter range: 40250 mm (1.5010.0 inch), 160500 mm (12.018.0 inch) (Wedge clamp)

GBP 269.90
1

Sandvik Coromant CoroMill 365 Face Milling Cutter RA365-063R19-S15M

Sandvik Coromant CoroMill 365 Face Milling Cutter RA365-063R19-S15M

Product Range: CoroMill 365CoroMill 365 is the essential tool for rough to semi-finish face milling of cast iron and steel components. Use the tool for large series production and applications where high metal removal rate is critical. First choice for roughing to semi-finishing in cast iron.Benefits- Inserts with ability to machine down to AP = 6 mm (0.236 inch)- Unique design with eight true cutting edges for high productivity machining to achieve low cost per component- Multi-edge self-located insert provides robust and reliable machining- The higher density of inserts in the cutter body means that higher table feeds can be implemented to give exceptional manufacturing economyFeatures- Coromant Capto coupling or Arbor mounted- Through coolant design- Right- or left-hand insert design available- Geometry and grade laser marked on the insert for easy identification- Wiper inserts for improved surface finishApplication- Face milling cutter developed for machining in ISO K material, but also works well in ISO P and ISO H materials- Diameter range: 40250 mm (1.5010.0 inch), 160500 mm (12.018.0 inch) (Wedge clamp)

GBP 749.99
1

Sandvik Coromant CoroMill 365 Face Milling Cutter RA365-076R25-W15H

Sandvik Coromant CoroMill 365 Face Milling Cutter RA365-076R25-W15H

Product Range: CoroMill 365CoroMill 365 is the essential tool for rough to semi-finish face milling of cast iron and steel components. Use the tool for large series production and applications where high metal removal rate is critical. First choice for roughing to semi-finishing in cast iron.Benefits- Inserts with ability to machine down to AP = 6 mm (0.236 inch)- Unique design with eight true cutting edges for high productivity machining to achieve low cost per component- Multi-edge self-located insert provides robust and reliable machining- The higher density of inserts in the cutter body means that higher table feeds can be implemented to give exceptional manufacturing economyFeatures- Coromant Capto coupling or Arbor mounted- Through coolant design- Right- or left-hand insert design available- Geometry and grade laser marked on the insert for easy identification- Wiper inserts for improved surface finishApplication- Face milling cutter developed for machining in ISO K material, but also works well in ISO P and ISO H materials- Diameter range: 40250 mm (1.5010.0 inch), 160500 mm (12.018.0 inch) (Wedge clamp)

GBP 1249.99
1

10x Sandvik Coromant R365-1505ZNE-PM Insert Grade 4220

10x Sandvik Coromant R365-1505ZNE-PM Insert Grade 4220

Product Range: CoroMill 365CoroMill 365 is the essential tool for rough to semi-finish face milling of cast iron and steel components. Use the tool for large series production and applications where high metal removal rate is critical. First choice for roughing to semi-finishing in cast iron.Benefits- Inserts with ability to machine down to AP = 6 mm (0.236 inch)- Unique design with eight true cutting edges for high productivity machining to achieve low cost per component- Multi-edge self-located insert provides robust and reliable machining- The higher density of inserts in the cutter body means that higher table feeds can be implemented to give exceptional manufacturing economyFeatures- Coromant Capto coupling or Arbor mounted- Through coolant design- Right- or left-hand insert design available- Geometry and grade laser marked on the insert for easy identification- Wiper inserts for improved surface finishApplication- Face milling cutter developed for machining in ISO K material, but also works well in ISO P and ISO H materials- Diameter range: 40250 mm (1.5010.0 inch), 160500 mm (12.018.0 inch) (Wedge clamp)

GBP 269.90
1

Sandvik Coromant CoroMill 365 Insert for Milling R365-1505ZNE-PM4330

Sandvik Coromant CoroMill 365 Insert for Milling R365-1505ZNE-PM4330

Product Range: CoroMill 365CoroMill 365 is the essential tool for rough to semi-finish face milling of cast iron and steel components. Use the tool for large series production and applications where high metal removal rate is critical. First choice for roughing to semi-finishing in cast iron.Benefits- Inserts with ability to machine down to AP = 6 mm (0.236 inch)- Unique design with eight true cutting edges for high productivity machining to achieve low cost per component- Multi-edge self-located insert provides robust and reliable machining- The higher density of inserts in the cutter body means that higher table feeds can be implemented to give exceptional manufacturing economyFeatures- Coromant Capto coupling or Arbor mounted- Through coolant design- Right- or left-hand insert design available- Geometry and grade laser marked on the insert for easy identification- Wiper inserts for improved surface finishApplication- Face milling cutter developed for machining in ISO K material, but also works well in ISO P and ISO H materials- Diameter range: 40250 mm (1.5010.0 inch), 160500 mm (12.018.0 inch) (Wedge clamp)

GBP 49.99
1