39 results (0,14095 seconds)

Show all filters

Brand

Colour

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

SWP Side Entry Single Stage 2 Gauge Nitrogen Regulator 10 Bar

SWP Side Entry Single Stage 2 Gauge Nitrogen Regulator 10 Bar

Manufactured and designed to offer complete protection for both operator and equipment, combined with high flow performance and ease of use. Regulators conform to BS EN ISO 2503 with the gauges conforming to BS EN ISO 5171. The two gauges enable reading of gas pressure and contents for optimum control. Date stamped to show when regulator needs replacing or refurbishing. Designed Specifically for side entry cylinders. Regulators should be refurbished or replaced every 5 years. To Be Used in Conjunction with a Flashback Arrestor

GBP 34.99
1

SWP Side Entry Single Stage 2 Gauge Acetylene Regulator 1.5 Bar

SWP Side Entry Single Stage 2 Gauge Acetylene Regulator 1.5 Bar

Manufactured and designed to offer complete protection for both operator and equipment, combined with high flow performance and ease of use. Regulators conform to BS EN ISO 2503 with the gauges conforming to BS EN ISO 5171. The two gauges enable reading of gas pressure and contents for optimum control. Date stamped to show when regulator needs replacing or refurbishing. Designed Specifically for side entry cylinders. Regulators should be refurbished or replaced every 5 years. To Be Used in Conjunction with a Flashback Arrestor

GBP 29.99
1

SWP Side Entry Single Stage 2 Gauge Oxygen Regulator 10 Bar

SWP Side Entry Single Stage 2 Gauge Oxygen Regulator 10 Bar

Manufactured and designed to offer complete protection for both operator and equipment, combined with high flow performance and ease of use. Regulators conform to BS EN ISO 2503 with the gauges conforming to BS EN ISO 5171. The two gauges enable reading of gas pressure and contents for optimum control. Date stamped to show when regulator needs replacing or refurbishing. Designed Specifically for side entry cylinders. Regulators should be refurbished or replaced every 5 years. To Be Used in Conjunction with a Flashback Arrestor

GBP 30.99
1

SWP Side Entry Single Stage 2 Gauge Argon/CO2 Regulator 45L/Min

SWP Side Entry Single Stage 2 Gauge Argon/CO2 Regulator 45L/Min

Manufactured and designed to offer complete protection for both operator and equipment, combined with high flow performance and ease of use. Regulators conform to BS EN ISO 2503 with the gauges conforming to BS EN ISO 5171. The two gauges enable reading of gas pressure and contents for optimum control. Date stamped to show when regulator needs replacing or refurbishing. Designed Specifically for side entry cylinders. Regulators should be refurbished or replaced every 5 years. To Be Used in Conjunction with a Flashback Arrestor

GBP 209.99
1

SWP 8mm x 10m Acetylene Hose 3/8" - 3/8"

SWP 8mm x 10m Acetylene Hose 3/8" - 3/8"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 21.99
1

SWP 8mm x 20m Oxygen Hose 3/8" - 3/8"

SWP 8mm x 20m Oxygen Hose 3/8" - 3/8"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 32.99
1

SWP 6mm x 5m Oxygen Hose 3/8" - 3/8"

SWP 6mm x 5m Oxygen Hose 3/8" - 3/8"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 16.39
1

SWP 6mm x 5m Oxygen Hose 3/8"- 1/4"

SWP 6mm x 5m Oxygen Hose 3/8"- 1/4"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 12.99
1

SWP 6mm x 20m Oxygen Hose 3/8" - 1/4"

SWP 6mm x 20m Oxygen Hose 3/8" - 1/4"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 37.99
1

SWP 10mm x 5m Acetylene Hose 3/8" - 3/8"

SWP 10mm x 5m Acetylene Hose 3/8" - 3/8"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 18.49
1

SWP 8mm x 20m Acetylene Hose 3/8" - 3/8"

SWP 8mm x 20m Acetylene Hose 3/8" - 3/8"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 36.99
1

SWP 6mm x 5m Propane Hose 3/8" - 3/8"

SWP 6mm x 5m Propane Hose 3/8" - 3/8"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 17.99
1

SWP 6mm x 10m Acetylene Hose 3/8" - 1/4"

SWP 6mm x 10m Acetylene Hose 3/8" - 1/4"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 45.99
1

SWP 10mm x 20m Acetylene Hose 3/8" - 3/8"

SWP 10mm x 20m Acetylene Hose 3/8" - 3/8"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 40.99
1

SWP 10mm x 10m Acetylene Hose 3/8" - 3/8"

SWP 10mm x 10m Acetylene Hose 3/8" - 3/8"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 26.99
1

SWP 6mm x 5m Acetylene Hose 3/8" - 3/8"

SWP 6mm x 5m Acetylene Hose 3/8" - 3/8"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 16.39
1

SWP 6mm x 10m Oxygen Hose 3/8" - 3/8"

SWP 6mm x 10m Oxygen Hose 3/8" - 3/8"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 19.99
1

SWP 6mm x 10m Acetylene Hose 3/8" - 3/8"

SWP 6mm x 10m Acetylene Hose 3/8" - 3/8"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 19.99
1

SWP 8mm x 10m Oxygen Hose 3/8" - 3/8"

SWP 8mm x 10m Oxygen Hose 3/8" - 3/8"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 22.99
1

SWP 6mm x 10m Oxygen Hose 3/8" - 1/4"

SWP 6mm x 10m Oxygen Hose 3/8" - 1/4"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 45.99
1