46 results (0,15350 seconds)

Show all filters

Brand

Colour

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

SWP Side Entry Single Stage 2 Gauge Nitrogen Regulator 10 Bar

SWP Side Entry Single Stage 2 Gauge Nitrogen Regulator 10 Bar

Manufactured and designed to offer complete protection for both operator and equipment, combined with high flow performance and ease of use. Regulators conform to BS EN ISO 2503 with the gauges conforming to BS EN ISO 5171. The two gauges enable reading of gas pressure and contents for optimum control. Date stamped to show when regulator needs replacing or refurbishing. Designed Specifically for side entry cylinders. Regulators should be refurbished or replaced every 5 years. To Be Used in Conjunction with a Flashback Arrestor

GBP 34.99
1

SWP Side Entry Single Stage 2 Gauge Acetylene Regulator 1.5 Bar

SWP Side Entry Single Stage 2 Gauge Acetylene Regulator 1.5 Bar

Manufactured and designed to offer complete protection for both operator and equipment, combined with high flow performance and ease of use. Regulators conform to BS EN ISO 2503 with the gauges conforming to BS EN ISO 5171. The two gauges enable reading of gas pressure and contents for optimum control. Date stamped to show when regulator needs replacing or refurbishing. Designed Specifically for side entry cylinders. Regulators should be refurbished or replaced every 5 years. To Be Used in Conjunction with a Flashback Arrestor

GBP 29.99
1

SWP Side Entry Single Stage 2 Gauge Argon/CO2 Regulator 45L/Min

SWP Side Entry Single Stage 2 Gauge Argon/CO2 Regulator 45L/Min

Manufactured and designed to offer complete protection for both operator and equipment, combined with high flow performance and ease of use. Regulators conform to BS EN ISO 2503 with the gauges conforming to BS EN ISO 5171. The two gauges enable reading of gas pressure and contents for optimum control. Date stamped to show when regulator needs replacing or refurbishing. Designed Specifically for side entry cylinders. Regulators should be refurbished or replaced every 5 years. To Be Used in Conjunction with a Flashback Arrestor

GBP 31.99
1

SWP Side Entry Single Stage 2 Gauge Oxygen Regulator 10 Bar

SWP Side Entry Single Stage 2 Gauge Oxygen Regulator 10 Bar

Manufactured and designed to offer complete protection for both operator and equipment, combined with high flow performance and ease of use. Regulators conform to BS EN ISO 2503 with the gauges conforming to BS EN ISO 5171. The two gauges enable reading of gas pressure and contents for optimum control. Date stamped to show when regulator needs replacing or refurbishing. Designed Specifically for side entry cylinders. Regulators should be refurbished or replaced every 5 years. To Be Used in Conjunction with a Flashback Arrestor

GBP 30.99
1

SWP SG2 MIG Wire 0.8mm 15KG

SWP SG2 MIG Wire 0.8mm 15KG

A copper-coated mild steel MIG wire for welding mild and medium tensile steels. Supplied as a 15kg reel for ease of use. Features and Benefits Suitable for both mild and medium tensile steels, making for a versatile product 15kg reel size allows for an ample amount of use before having to purchase again Great all-round quality, meeting industry standards with ease Typical Applications Construction Shipbuilding Automotive Standards AWS : A5.18 ER70 S-6 BS : 2901 : A18 EN ISO 14341-A-G 42 4 C1/M21 3Si1 EN 10204 : 3.1

GBP 29.99
1

SWP CCMS 3.2mm Welding Rods 5 KG

SWP CCMS 3.2mm Welding Rods 5 KG

These packs of Copper Coated Mild Steel (CCMS) welding rods are suited for all types of mild steel and wrought iron gas welding. Available in three diameters, al packs contain 5kg worth of welding rods to suit multiple applications. Features and Benefits For use on all types of mild steel and wrought iron for versatility of use Recommended for use when gas welding with oxygen or acetylene for best results Available in three different diameters to suit your requirements Typical Applications Particularly suitable for welding sheet metal panels, plates and tubes Standards AWS A5.2 R45 BS 1453 A1

GBP 24.99
1

SWP CCMS 2.4mm Welding Rods 5 KG

SWP CCMS 2.4mm Welding Rods 5 KG

These packs of Copper Coated Mild Steel (CCMS) welding rods are suited for all types of mild steel and wrought iron gas welding. Available in three diameters, al packs contain 5kg worth of welding rods to suit multiple applications. Features and Benefits For use on all types of mild steel and wrought iron for versatility of use Recommended for use when gas welding with oxygen or acetylene for best results Available in three different diameters to suit your requirements Typical Applications Particularly suitable for welding sheet metal panels, plates and tubes Standards AWS A5.2 R45 BS 1453 A1

GBP 26.99
1

SWP CCMS 1.6mm Welding Rods 5 KG

SWP CCMS 1.6mm Welding Rods 5 KG

These packs of Copper Coated Mild Steel (CCMS) welding rods are suited for all types of mild steel and wrought iron gas welding. Available in three diameters, al packs contain 5kg worth of welding rods to suit multiple applications. Features and Benefits For use on all types of mild steel and wrought iron for versatility of use Recommended for use when gas welding with oxygen or acetylene for best results Available in three different diameters to suit your requirements Typical Applications Particularly suitable for welding sheet metal panels, plates and tubes Standards AWS A5.2 R45 BS 1453 A1

GBP 64.99
1

SWP Super 6 309Lsi 1.0mm 15kg

SWP Super 6 309Lsi 1.0mm 15kg

SWP SUPER 6 309Lsi 1.0mm 15kg Stainless Steel MIG Wire SWP SUPER 6 309Lsi 1.0mm 15kg Stainless Steel MIG Wire is a high-quality, flux-cored wire that is ideal for welding a variety of stainless steels. It is made with a low-carbon alloy that provides excellent corrosion resistance and weldability. The wire is also easy to use and produces a smooth, consistent weld bead. SWP SUPER 6 309Lsi 1.0mm 15kg Stainless Steel MIG Wire is perfect for a variety of applications, including: Chemical processing Power generation Food processing Marine applications Repair and maintenance This wire is also certified to the following standards: AWS 5.9 ER 309LSI EN ISO 14343:23 12 LSI BS 2901 309 S93 SWP SUPER 6 309Lsi 1.0mm 15kg Stainless Steel MIG Wire is available in a 15kg spool. It is backed by SWP's satisfaction guarantee. Features: Low-carbon alloy for excellent corrosion resistance Easy to use Produces a smooth, consistent weld bead Perfect for a variety of applications Certified to AWS 5.9 ER 309LSI, EN ISO 14343:23 12 LSI, and BS 2901 309 S93 Available in a 15kg spool Backed by SWP's satisfaction guarantee Benefits: Produces high-quality welds Easy to use Affordable Backed by SWP's satisfaction guarantee Order your SWP SUPER 6 309Lsi 1.0mm 15kg Stainless Steel MIG Wire today!

GBP 519.99
1

SWP 6mm x 5m Oxygen Hose 3/8" - 3/8"

SWP 6mm x 5m Oxygen Hose 3/8" - 3/8"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 16.39
1

SWP 8mm x 20m Oxygen Hose 3/8" - 3/8"

SWP 8mm x 20m Oxygen Hose 3/8" - 3/8"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 36.99
1

SWP 6mm x 20m Oxygen Hose 3/8" - 1/4"

SWP 6mm x 20m Oxygen Hose 3/8" - 1/4"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 33.99
1

SWP 6mm x 5m Oxygen Hose 3/8"- 1/4"

SWP 6mm x 5m Oxygen Hose 3/8"- 1/4"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 12.99
1

SWP 10mm x 10m Acetylene Hose 3/8" - 3/8"

SWP 10mm x 10m Acetylene Hose 3/8" - 3/8"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 27.99
1

SWP 6mm x 5m Acetylene Hose 3/8" - 3/8"

SWP 6mm x 5m Acetylene Hose 3/8" - 3/8"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 16.99
1

SWP 10mm x 20m Acetylene Hose 3/8" - 3/8"

SWP 10mm x 20m Acetylene Hose 3/8" - 3/8"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 40.99
1

SWP 10mm x 10m Oxygen Hose 3/8" - 3/8"

SWP 10mm x 10m Oxygen Hose 3/8" - 3/8"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 27.99
1

SWP 6mm x 20m Oxygen Hose 3/8" - 3/8"

SWP 6mm x 20m Oxygen Hose 3/8" - 3/8"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 35.99
1

SWP 6mm x 5m Acetylene Hose 3/8"- 1/4"

SWP 6mm x 5m Acetylene Hose 3/8"- 1/4"

This range of gas welding hoses are kink and crush resistant and are fitted with an industry standard 3/8in. BSP fitting on the regulator end. The hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Available in a variety of specifications to suit your needs. Features and Benefits Kink and crush resistant hoses make for highly durable products Industry standard 3/8in. BSP fittings on the regulator end allow for versatility of use With safety check valves at the torch end for optimum user safety when welding Oxygen fittings are right hand thread whilst fuel gas fittings are left hand thread Available in a range of specifications to suit your requirements Typical Applications Gas Welding Standards EN 559 / BS EN ISO 3821

GBP 12.99
1