17 results (0,16081 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

SAS RED234 Datastore Software Package with RS232 Port with 3m Lead

SAS RED234 Datastore Software Package with RS232 Port with 3m Lead

SAS RED234 Datastore Software Package with RS232 Port with 3m LeadThe software package enables all events on the Red Alert system to be logged on a PC. The date time location and type of alarm call will be recorded along with reset and fault reports. A dedicated PC and printer are not required and the programme can be minimised and run in the background.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.Key FeaturesIt is possible to print selected data using the PCs own printer.The information displayed can be filtered to only shown the data you are currently interested in i.e. all logged information for CONSULTING ROOM 2.An alert popup window or sound can be set to inform you of a new event.The colours of the text background and font can be altered to suit your requirements.Personal details can be entered for each identification in the log i.e. response procedures access requirements etc.

GBP 567.00
1

SAS RED228 Alphanumeric Paging Transmitter with Aerial

SAS RED228 Alphanumeric Paging Transmitter with Aerial

SAS RED228 Alphanumeric Paging Transmitter with AerialAn alphanumeric paging transmitter used in conjunction with the RED229 pocket pagers. The pager is used to send text messages to the response staff showing them the precise location where assistance is required. It can be configured in many different ways for example allowing only the highest priority alarm calls to be paged or to link several Red Alert systems via a common paging system. It can also be configured to work as an on-site paging system with connections to a PC or telephone system. It is supplied with RS232 interface unit connection lead and aerial.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 1296.00
1

SAS RED212 Extension Sounder Unit

SAS RED212 Extension Sounder Unit

SAS RED212 Extension Sounder UnitThis extension sounder is used to mimic the indicator panel call tones. They provide a cost effective way of providing an alarm sound is areas where indicator panels are not required. The tones generated are louder than those from the range of indicator panels.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 168.48
1

SAS RED219 Over Door Indicator Light with Sounder

SAS RED219 Over Door Indicator Light with Sounder

SAS RED219 Over Door Indicator Light with SounderUsed in conjunction with the door monitor this indicator light can be fitted above a controlled door to indicate when an alarm call has been made. These over door lights are fitted with a sounder to attract attention audibly as well as visuallyThe Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 121.50
1

SAS RED201 System Control amp Power Supply Unit PSU

SAS RED201 System Control amp Power Supply Unit PSU

SAS RED201 System Control Power Supply Unit PSUThe HUB is the central control of the Red Alert system and has the ultimate capacity of 254 addressable call points and 26 LCD indicator panels. The cabinet has a lockable hinged door and houses the main control PCB HUB the power supply unit and has space for battery back-up if required.It should be installed centrally in the system layout normally in a secure location and requires a 240 mains supply from an un-switched fused spur. An input from a day night volume control switch is available to adjust the volume of the LCD indicator panels alternatively this can be set to automatically change at a certain time of day. A voltage free set of contacts is provided to trigger external devices in the event of a call an alarm call or an attack call. These contacts can be used to trigger tone pagers or additional voltage sounder or strobe lights etc.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 291.60
1

SAS RED245 Push Button Assistance Call Point with Magnetic Reset

SAS RED245 Push Button Assistance Call Point with Magnetic Reset

SAS RED245 Push Button Assistance Call Point with Magnetic ResetA wall mounted call point with a large red actuator to activate an alarm call. These units are used in areas where staff or visitors may need to activate the alarm system but may not be carrying an infra-red transmitter. It is reset using a magnetic reset key RED216.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 115.84
1

SAS RED210R Overdoor Indicator Light with Volt Free Relay Contacts Rated at 1A 12Vd.c

SAS RED210R Overdoor Indicator Light with Volt Free Relay Contacts Rated at 1A 12Vd.c

SAS RED210R Overdoor Indicator Light with Volt Free Relay Contacts Rated at 1A 12Vd.cSimilar to the over door indicator light it can be activated by up to eight alarm points. The voltage free contacts provided can be used to activate other systems for example to lock or unlock emergency exit doors set off a strobe light or active a nearby CCTV camera.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 121.50
1

SAS RED229-1 Alphanumeric Pager Receiver with Belt Clip

SAS RED229-1 Alphanumeric Pager Receiver with Belt Clip

SAS RED229-1 Alphanumeric Pager Receiver with Belt ClipCarried by response staff these units can be programmed to bleep and vibrate alerting staff that an alarm call has been received. The pagers display shows the exact origin and the type of alarm call received. They are supplied with a belt clip holster and a bungee cord to reduce the chance of accidental damage.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 267.30
1

SAS RED205C Infrared Slave Receiver Ceiling Mounted

SAS RED205C Infrared Slave Receiver Ceiling Mounted

SAS RED205C Infrared Slave Receiver Ceiling MountedThis receiver is used to increase the coverage of an infra-red receiver. They are commonly used in corridors large dining areas and en-suite wcs. Up to three slaves can be connected to an infra-red receiver which is sufficient to cover approximately 200 square metres. They are the same as the RED205 in appearance.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 63.18
1

SAS RED255 External Infrared Receiver

SAS RED255 External Infrared Receiver

SAS RED255 External Infrared ReceiverThis is a RED205 sensor mounted in a weather resistant IP65 rated enclosure. It is designed for use when personal attack coverage is required in external areas for example gardens and patios. It has a range of approximately 10 metres and the alarm transmitters must be aimed towards the sensor and for this reason it has a bright fluorescent orange label.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 179.02
1

SAS RED210 Overdoor Indicator Light

SAS RED210 Overdoor Indicator Light

SAS RED210 Overdoor Indicator LightA useful option these lights can be fitted outside each room to indicate that an alarm call has been made from inside. Staff often find these useful in the rapid location of calls. The light pulses red to signal which priority of call has been initiated. It can be used as a group light to indicate calls from up to eight alarm points.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 115.84
1

SAS RED236 Hand Held Infrared Programming Unit

SAS RED236 Hand Held Infrared Programming Unit

SAS RED236 Hand Held Infrared Programming UnitThe RED236 is an essential tool during commissioning. It is used to programme the infra-red call points with their unique address number and the text description room name of the sensor. The information is entered into the programmer it is then pointed at the infra-red sensor an infra-red link transfers the data. This makes changes of room names at a later date very easy.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 186.30
1

SAS RED200 12-24V DC Infrared Receiver with Relay Output Stand Alone Non-Addressable

SAS RED200 12-24V DC Infrared Receiver with Relay Output Stand Alone Non-Addressable

SAS RED200 12-24V DC Infrared Receiver with Relay Output Stand Alone Non-AddressableIt is similar in appearance to the RED205 sensor and has been designed to operate as a stand-alone sensor. This means that with a supply voltage between 12 and 24 volt d.c. to power it any activation by a transmitter from our range will activate an on-board relay. These sensors are used to integrate with other call systems providing them with the flexibility of infra-red technologyThe Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 97.20
1

SAS RED205 Infrared Receiver Ceiling Mounted

SAS RED205 Infrared Receiver Ceiling Mounted

SAS RED205 Infrared Receiver Ceiling MountedThese infra-red receivers are usually fitted in areas where the staff may feel at risk or may need to call for assistance. They receive alarm signals from our range of infra-red transmitters and send the location of the alarm call to the indicator panels. A red light reassures that an alarm call has been received and is also used in conjunction with our new alarm transmitter for the user test function.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 147.42
1

SAS NET234 Data Store Software

SAS NET234 Data Store Software

SAS NET234 Data Store SoftwareThe software package enables all events on the Network II system to be logged on a PC. The date time location and type of alarm call will be recorded along with reset and fault reports. A dedicated PC and printer are not required and the programme can be minimised and run in the background.Key FeaturesIt is possible to print selected data using the PCs own printer.The information displayed can be filtered to only shown the data you are currently interested in i.e. all logged information for 1st floor bedroom 6.An alert popup window or sound can be set to inform you of a new event.The colours of the text background and font can be altered to suit your requirements.Personal details can be entered for identification in the log i.e. family contact details or drugs information.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 729.00
1

SAS ReconRED208 Reconditioned RED208 Infrared Unit

SAS ReconRED208 Reconditioned RED208 Infrared Unit

SAS ReconRED208 Reconditioned RED208 Infrared UnitThe ReconRED208 is a Reconditioned RED208 Infrared Unit.Carried by staff in establishments where they may feel at risk of an attack or who might need to call for urgent assistance. An alarm button is used to unobtrusively activate an alarm call on the nearest infra-red sensor. Pulling the transmitter away from its clothing clip activates an attack call. The unit is battery operated and it is easily replaced by the user. IA button is provided to check the battery health indicated by an LED array on the transmitter furthermore the nearest infra-red sensors reassurance light will flash to confirm a healthy signal. This is a confidence inspiring feature for the user who can quickly test the transmitter and sensors function in an environment when dealing with a potentially serious situation. All transmitters have a serial number and the facility to personalise the label.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 64.80
1