10 results (0,14574 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

SAS RED236 Hand Held Infrared Programming Unit

SAS RED236 Hand Held Infrared Programming Unit

SAS RED236 Hand Held Infrared Programming UnitThe RED236 is an essential tool during commissioning. It is used to programme the infra-red call points with their unique address number and the text description room name of the sensor. The information is entered into the programmer it is then pointed at the infra-red sensor an infra-red link transfers the data. This makes changes of room names at a later date very easy.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 186.30
1

SAS NET208 Infrared Call Transmitter For Use With NET207 Range

SAS NET208 Infrared Call Transmitter For Use With NET207 Range

SAS NET208 Infrared Call Transmitter For Use With NET207 RangeA transmitter designed to be easy to operate. A large orange button activates an infra-red sensor with the lowest priority call level. It is ideal for use by residents or patients who are vulnerable and need the use of a call system. It can be supplied as a necklace pendant or as a hand held unit.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 97.20
1

SAS NET208CC Infrared Call Transmitter with Clothing Clip

SAS NET208CC Infrared Call Transmitter with Clothing Clip

SAS NET208CC Infrared Call Transmitter with Clothing ClipA transmitter designed to be easy to operate. A large orange button activates an infra-red sensor with the lowest priority call level. It is ideal for use by residents or patients who are vulnerable and need the use of a call system. It can be supplied as a necklace pendant or as a hand held unit.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.Key FeaturesComes with clothing clip

GBP 97.20
1

SAS Caring Technology Touch-Wireless-CP Touch Wireless Call Point with Call Level No Reset

SAS Caring Technology Touch-Wireless-CP Touch Wireless Call Point with Call Level No Reset

SAS Caring Technology Touch-Wireless-CP Touch Wireless Call Point with CallLevel No ResetDesigned for challenging environments. The room unitmanufactured from injection molded Tritan Tx more resilient thanPolycarbonate is low profile and vandal resistant. The unit is touch buttonactuated and any of the above configuration of active buttons can be achieved.The patient touches the area denoted by the orange paddle to activate a patientcall. The hidden LED in the centre of the call point illuminates red when thebuttons are touched. A low battery warning will sound when the battery is low.Upon detection of a low battery a CALL signal is sent out this will not besent again until the battery has been changed. While the room units battery islow it will continue to flash its red LED every 15 seconds and sound its buzzerevery 2 minutes. Staff should be made aware of this. The buttons in the framestaff only can be used by the nurse to reset the call. Included 2x torx M3.5x 25mm security screws 3 x AAA batteries surface back box optionalThe wireless call points are a cost-effectiveapproach to add nurse call to an existing staff attack system. This helps keepdisruption to a minimum since no walls need to be chased and are easilyinstalled with an anti-ligature surface collar. The slave wireless call pointsyncs with a master IR receiver which is addressed to understand its location.

GBP 186.30
1

SAS Caring Technology Touch-Wireless-CP-R Touch Wireless Call Point with Call Reset Reset And Test Levels

SAS Caring Technology Touch-Wireless-CP-R Touch Wireless Call Point with Call Reset Reset And Test Levels

SAS Caring Technology Touch-Wireless-CP-R Touch Wireless Call Point with Call Reset Reset And Test LevelsDesigned for challenging environments. The room unit manufactured from injection molded Tritan Tx more resilient than Polycarbonate is low profile and vandal resistant. The unit is touch button actuated and any of the above configuration of active buttons can be achieved. The patient touches the area denoted by the orange paddle to activate a patient call. The hidden LED in the centre of the call point illuminates red when the buttons are touched. A low battery warning will sound when the battery is low. Upon detection of a low battery a CALL signal is sent out this will not be sent again until the battery has been changed. While the room units battery is low it will continue to flash its red LED every 15 seconds and sound its buzzer every 2 minutes. Staff should be made aware of this. The buttons in the frame staff only can be used by the nurse to reset the call. Included 2x torx M3.5 x 25mm security screws 3 x AAA batteries surface back box optionalThe wireless call points are a cost effective approach to add nurse call to an existing staff attack system. This helps keep disruption to a minimum since no walls need to be chased and are easily installed with an anti-ligature surface collar. The slave wireless call point syncs with a master IR receiver which is addressed to understand its location.LED FunctionGreen Battery goodYellow Battery should be changedRed Change battery nowPlease note The image is for illustrative purposes only.

GBP 186.30
1

SAS Caring Technology Touch-Wireless-CP-ATT Touch Wireless Call Point with Attack Level No Reset

SAS Caring Technology Touch-Wireless-CP-ATT Touch Wireless Call Point with Attack Level No Reset

SAS Caring Technology Touch-Wireless-CP-ATT Touch Wireless Call Point with Attack Level No ResetDesigned for challenging environments. The room unit manufactured from injection molded Tritan Tx more resilient than Polycarbonate is low profile and vandal resistant. The unit is touch button actuated and any of the above configuration of active buttons can be achieved. The patient touches the area denoted by the orange paddle to activate a patient call. The hidden LED in the centre of the call point illuminates red when the buttons are touched. A low battery warning will sound when the battery is low. Upon detection of a low battery a CALL signal is sent out this will not be sent again until the battery has been changed. While the room units battery is low it will continue to flash its red LED every 15 seconds and sound its buzzer every 2 minutes. Staff should be made aware of this. The buttons in the frame staff only can be used by the nurse to reset the call. Included 2x torx M3.5 x 25mm security screws 3 x AAA batteries surface back box optionalThe wireless call points are a cost effective approach to add nurse call to an existing staff attack system. This helps keep disruption to a minimum since no walls need to be chased and are easily installed with an anti-ligature surface collar. The slave wireless call point syncs with a master IR receiver which is addressed to understand its location.LED FunctionGreen Battery goodYellow Battery should be changedRed Change battery nowPlease note The image is for illustrative purposes only.

GBP 186.30
1

SAS Caring Technology Touch-Wireless-CP-RU Touch Wireless Call Point with Call Reset Crash And Alarm Levels

SAS Caring Technology Touch-Wireless-CP-RU Touch Wireless Call Point with Call Reset Crash And Alarm Levels

SAS Caring Technology Touch-Wireless-CP-RU Touch Wireless Call Point with Call Reset Crash And Alarm LevelsDesigned for challenging environments. The room unit manufactured from injection molded Tritan Tx more resilient than Polycarbonate is low profile and vandal resistant. The unit is touch button actuated and any of the above configuration of active buttons can be achieved. The patient touches the area denoted by the orange paddle to activate a patient call. The hidden LED in the centre of the call point illuminates red when the buttons are touched. A low battery warning will sound when the battery is low. Upon detection of a low battery a CALL signal is sent out this will not be sent again until the battery has been changed. While the room units battery is low it will continue to flash its red LED every 15 seconds and sound its buzzer every 2 minutes. Staff should be made aware of this. The buttons in the frame staff only can be used by the nurse to reset the call. Included 2x torx M3.5 x 25mm security screws 3 x AAA batteries surface back box optionalThe wireless call points are a cost effective approach to add nurse call to an existing staff attack system. This helps keep disruption to a minimum since no walls need to be chased and are easily installed with an anti-ligature surface collar. The slave wireless call point syncs with a master IR receiver which is addressed to understand its location.LED FunctionGreen Battery goodYellow Battery should be changedRed Change battery nowPlease note The image is for illustrative purposes only.

GBP 202.50
1