79 results (0,14108 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

SAS NET205MISO Patient Call Unit with Manual Reset and Alarm and Crash Call plus Key

SAS NET205MISO Patient Call Unit with Manual Reset and Alarm and Crash Call plus Key

SAS NET205MISO Patient Call Unit with Manual Reset and Alarm and Crash Call plus KeyThe NET205MISO is a Patient Call Unit with Manual Reset and Alarm and Crash Call. It comes with a key for resetting the unit.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 105.30
1

SAS NET205ISO Patient Call Unit with Magnetic Reset and Alarm and Crash Call Facilities

SAS NET205ISO Patient Call Unit with Magnetic Reset and Alarm and Crash Call Facilities

SAS NET205ISO Patient Call Unit with Magnetic Reset and Alarm and Crash Call FacilitiesThe NET205 has the same features and functions as the NET205M with the staff operations on this call unit controlled by a magnetic key NET216.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.Key FeaturesMagnetic ResetAlarm Crash Call Facilities

GBP 136.90
1

SAS Caring Technology Touch-Display-Network-SF Vandal Resistant Display and Sounder

SAS Caring Technology Touch-Display-Network-SF Vandal Resistant Display and Sounder

SAS Caring Technology Touch-Display-Network-SF Vandal Resistant Display and SounderDesigned for challenging environments. The displaysounder unit manufactured from 4mm Makrolon polycarbonate is low profile and vandal resistant. The display clearly shows the exact location of an incident whilst drawing their attention audibly with a grille less speaker. Each call level has its own unique sound and if multiple calls are on the system the scroll buttons can be used to navigate through the list. The display unit features touch buttons only with a function to disable the buttons for ten seconds for cleaning. The back box is 25mm deep and for flush mounting installations employs a shock absorbing spring loaded caddy that allows 8mm of play to assist with the mounting of the device. Included 4 x torx M3.5 x 25mm security screws.Key FeaturesMaterial Polycarbonate MakrolonFascia 195mm x 115mm x 4mm surface or 225mm x 145mm x 4mm flushBack box 200mm x 120mm x 25mmDisplay window 145mm x 35mmCharacter height 12mmWeight with back box 400g 230gSupply current 20mA inactive 160mA activeSpeaker volume 60dbNetwork R B and YTemperature 0-50C

GBP 324.00
1

SAS NET201 System Control Hub and Power Supply Unit PSU

SAS NET201 System Control Hub and Power Supply Unit PSU

SAS NET201 System Control Hub and Power Supply Unit PSUThe HUB is the central control of the Network II system and has the ultimate capacity of 254 addressable call points and 26 LCD indicator panels. The cabinet has a lockable hinged door and houses the main control PCB HUB the power supply unit and has space for battery back-up if required. It should be installed centrally in the system layout normally in a secure location and requires a 240 mains supply from an un-switched fused spur.An input from a day night volume control switch is available to adjust the volume of the LCD indicator panels alternatively this can be set to automatically change at a certain time of day. A voltage free set of contacts is provided to trigger external devices in the event of a call an alarm call or a crash call. These contacts can be used to trigger tone pagers or additional voltage sounder or strobe lights etc.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 486.00
1

SAS NET208 Infrared Call Transmitter For Use With NET207 Range

SAS NET208 Infrared Call Transmitter For Use With NET207 Range

SAS NET208 Infrared Call Transmitter For Use With NET207 RangeA transmitter designed to be easy to operate. A large orange button activates an infra-red sensor with the lowest priority call level. It is ideal for use by residents or patients who are vulnerable and need the use of a call system. It can be supplied as a necklace pendant or as a hand held unit.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 97.20
1

SAS Caring Technology Touch-Wireless-CP-R Touch Wireless Call Point with Call Reset Reset And Test Levels

SAS Caring Technology Touch-Wireless-CP-R Touch Wireless Call Point with Call Reset Reset And Test Levels

SAS Caring Technology Touch-Wireless-CP-R Touch Wireless Call Point with Call Reset Reset And Test LevelsDesigned for challenging environments. The room unit manufactured from injection molded Tritan Tx more resilient than Polycarbonate is low profile and vandal resistant. The unit is touch button actuated and any of the above configuration of active buttons can be achieved. The patient touches the area denoted by the orange paddle to activate a patient call. The hidden LED in the centre of the call point illuminates red when the buttons are touched. A low battery warning will sound when the battery is low. Upon detection of a low battery a CALL signal is sent out this will not be sent again until the battery has been changed. While the room units battery is low it will continue to flash its red LED every 15 seconds and sound its buzzer every 2 minutes. Staff should be made aware of this. The buttons in the frame staff only can be used by the nurse to reset the call. Included 2x torx M3.5 x 25mm security screws 3 x AAA batteries surface back box optionalThe wireless call points are a cost effective approach to add nurse call to an existing staff attack system. This helps keep disruption to a minimum since no walls need to be chased and are easily installed with an anti-ligature surface collar. The slave wireless call point syncs with a master IR receiver which is addressed to understand its location.LED FunctionGreen Battery goodYellow Battery should be changedRed Change battery nowPlease note The image is for illustrative purposes only.

GBP 186.30
1

SAS Caring Technology Touch-Wireless-CP-RU Touch Wireless Call Point with Call Reset Crash And Alarm Levels

SAS Caring Technology Touch-Wireless-CP-RU Touch Wireless Call Point with Call Reset Crash And Alarm Levels

SAS Caring Technology Touch-Wireless-CP-RU Touch Wireless Call Point with Call Reset Crash And Alarm LevelsDesigned for challenging environments. The room unit manufactured from injection molded Tritan Tx more resilient than Polycarbonate is low profile and vandal resistant. The unit is touch button actuated and any of the above configuration of active buttons can be achieved. The patient touches the area denoted by the orange paddle to activate a patient call. The hidden LED in the centre of the call point illuminates red when the buttons are touched. A low battery warning will sound when the battery is low. Upon detection of a low battery a CALL signal is sent out this will not be sent again until the battery has been changed. While the room units battery is low it will continue to flash its red LED every 15 seconds and sound its buzzer every 2 minutes. Staff should be made aware of this. The buttons in the frame staff only can be used by the nurse to reset the call. Included 2x torx M3.5 x 25mm security screws 3 x AAA batteries surface back box optionalThe wireless call points are a cost effective approach to add nurse call to an existing staff attack system. This helps keep disruption to a minimum since no walls need to be chased and are easily installed with an anti-ligature surface collar. The slave wireless call point syncs with a master IR receiver which is addressed to understand its location.LED FunctionGreen Battery goodYellow Battery should be changedRed Change battery nowPlease note The image is for illustrative purposes only.

GBP 202.50
1

SAS NET218 Door Monitoring Unit with Key Switch for Isolation Reset

SAS NET218 Door Monitoring Unit with Key Switch for Isolation Reset

SAS NET218 Door Monitoring Unit with Key Switch for Isolation ResetLocated adjacent to doors or drug cabinets these units generate an alarm call if the door is breached. A key switch is provided to isolate the door monitor when a door needs to be opened the same key is used to reset following activation. A red reassurance light shows its status. A timed override feature is provided to allow staff to exit a door without it activating. This can be done by a simple magnetic key swipe see NET216 staff key or if a higher level of security is required by a coded access keypad.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 115.84
1

SAS RED255 External Infrared Receiver

SAS RED255 External Infrared Receiver

SAS RED255 External Infrared ReceiverThis is a RED205 sensor mounted in a weather resistant IP65 rated enclosure. It is designed for use when personal attack coverage is required in external areas for example gardens and patios. It has a range of approximately 10 metres and the alarm transmitters must be aimed towards the sensor and for this reason it has a bright fluorescent orange label.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 179.02
1

SAS RED2092 Single Reset Infrared Unit

SAS RED2092 Single Reset Infrared Unit

SAS RED2092 Single Reset Infrared UnitThe original transmitters from SAS. The RED2081 alarm transmitter is battery operated and incorporates a red alarm button and a clothing clip with pull activation for emergency calls. It can be tested using our RED2501 test station.The RED2092 is a reset transmitter. It has a blue reset signal button and a clothing clip with pull activation for emergency calls.The RED208T is a test transmitter. It has a white button and is used by staff to periodically test the infra-red receivers. Activating the transmitter in the vicinity of a receiver causes its LED to flash proving that it is working correctly.

GBP 97.20
1

SAS RED2081 Single Alarm Infrared Unit

SAS RED2081 Single Alarm Infrared Unit

SAS RED2081 Single Alarm Infrared UnitThe original transmitters from SAS. The RED2081 alarm transmitter is battery operated and incorporates a red alarm button and a clothing clip with pull activation for emergency calls. It can be tested using our RED2501 test station.The RED2092 is a reset transmitter. It has a blue reset signal button and a clothing clip with pull activation for emergence calls.The RED208T is a test transmitter. It has a white button and is used by staff to periodically test the infra-red receivers. Activating the transmitter in the vicinity of a receiver causes its LED to flash proving that it is working correctly.

GBP 97.20
1