11 results (0,13455 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Set of Three 75mm Light Stand Swivel Caster Wheels with Brakes (22mm Fitting)

Set of Three 75mm Light Stand Swivel Caster Wheels with Brakes (22mm Fitting)

EssentialPhoto triple metal locking wheels is ideally suitable for most of the floor condition such as carpet and laminated floor. It comes with brake locking design to secure the light stand at the required position, and unlock it and move it to next location with ease. The connector is made of quality and cast iron and the wheel is made of rubber with fine grid to give proper contact to the ground to prevent skidding. It is suitable for any stand legs with up to 2.2cm diameter.

GBP 29.99
1

5/8" Stud to 1/4”-20 Thread adapter with Female Spigot Bundle

5/8" Stud to 1/4”-20 Thread adapter with Female Spigot Bundle

This bundle has been put together as a solution for photographers and videographers who want to use certain entry-level lights with their heavy-Duty C-stand, or other stands with a baby-pin connection. The Stand mount on some less-expensive studio lights doesn’t sit securely on heavy-er duty stands such as C-stands, as the stand mount on them isn’t quite long enough to accommodate the longer baby-pin connector which is typically used on C-stands and other heavy-duty stands. This bundle consists of a 5/8” to 1/4”-20 Thread adapter, and a female 5/8” spigot, which when put together will enable you to mount any light that wouldn’t normally sit securely on a c-stand with no problems Simply remove the nut from the 5/8” Stud to 1/4“-20 thread adapter and screw the female spigot to the thread of the 5/8” Stud to 1/4“-20 thread adapter. Then mount your 5/8” Stud to 1/4“-20 thread adapter to the baby-pin connector of your stand, then connect your light to the female spigot on the female spigot in the same way you would mount it to a regular light stand.

GBP 19.99
1

Stainless Steel Bracket VESA Mount for Heavy-Duty stands and C-Stands with Baby-Pin

Stainless Steel Bracket VESA Mount for Heavy-Duty stands and C-Stands with Baby-Pin

The Super-Durable Stainless-Steel VESA bracket mount is designed to enable you to mount a TV or Monitor to any Heavy-Duty light stand with a baby-pin connector such as a C-Stands or our Stainless-Steel Tube Stands. Perfect for the studio photographer who likes to shoot tethered to a large screen, or for larger video productions that require a large monitor on set. The PiXAPRO Stainless Steel VESA Mount Bracket is the perfect accessory for people who require a heavy-Duty solution, for mounting a TV or monitor to a light stand. Perfect doe Studio photographers and videographers of all experience levels.

GBP 109.99
1

Set of Three Caster Wheels for Century Stands/C-STANDS (30mm Leg Diameter)

Set of Three Caster Wheels for Century Stands/C-STANDS (30mm Leg Diameter)

The Pixapro® set of three metal locking caster wheels are designed for use with Century Stands (or C-Stands), making it easier to move your lighting around the studio. They can be used on a variety of flooring surfaces such as carpet and laminated floors etc. The caster wheels feature brakes, which are designed to secure the light stand in the required position. If at any time you need to move your light, simply release the brakes, move you light into the position that you desire, and then simply re-apply the brakes to prevent it from moving. The connector is made from quality cast iron and the wheels themselves are made from a hard-wearing rubber with fine tread to give maximum contact with ground which prevent skidding.

GBP 49.99
1

108cm Double Riser Combo Centre-Column for C-Stands

108cm Double Riser Combo Centre-Column for C-Stands

The PIXAPRO 310cm Super Heavy Duty Stainless Steel Combo Stand with Levelling Legs is an essential piece of kit for the modern video or photography studio. Featuring both a 1-1/8th-inch Junior-Pin Receiver and a Retractable 5/8-inch Baby Pin connector, it can be used with virtually any studio light fixture, from studio strobes and COB LED lights, as well as larger Cinema and Broadcast quality HMIs, Lightanks, and large Cinema COB lights with large modifiers. The perfect tool for Cinematographers, DOPs, and Gaffers, as well as portrait, beauty, product, fashion, and commercial photographers, whether you're in the studio or on location. The PIXAPRO 310cm Super Heavy Duty Stainless Steel Combo Stand with Levelling Legs is ideal for Cinematographers, DOPs, and Gaffers, as well as for Commercial, product, portrait, fashion, and beauty photographers who require a highly durable light stand that can be used on uneven terrain.

GBP 99.99
1

560cm Heavy-Duty 4-Riser Geared Junior Pin Wind-up Stand (SPECIAL ORDER)

560cm Heavy-Duty 4-Riser Geared Junior Pin Wind-up Stand (SPECIAL ORDER)

The PIXAPRO 560cm Wind Up stand, is a Super Heavy Duty Stainless Steel Light Stand, designed for use with larger and heavier studio light fixtures that feature a 1-1/8” junior-pin connector such as HMIs such as ARRI lights, LED Light banks, and High-powered COB LED Light heads. Since these types of lights are typically very heavy, this stand features a Geared Crank Handle to make raising and lowering your lights an easy and effortless process. Due to its robust steel construction, and 70mm centre-column, this stand can take loads of up to 65kg, making it ideal for these types of lights. It also features 4-risers, allowing it to be extended up to 560cm in height, combined with its large footprint diameter of 220cm, to ensure maximum stability. Perfect for use in any broadcast and tv studio, as well as on movie production sets

GBP 2799.00
1

170-280cm Heavy-Duty Single-Riser Stainless Steel Geared Junior Wind-up Stand

170-280cm Heavy-Duty Single-Riser Stainless Steel Geared Junior Wind-up Stand

The PIXAPRO 280cm Wind Up stand is a Super Heavy Duty Stainless Steel Light Stand, designed for use with larger and heavier studio light fixtures that feature a 1-1/8” junior-pin connector such as HMIs such as ARRI lights, LED Light banks, and High-powered COB LED Light heads. Since these types of lights are typically very heavy, this stand features a Geared Crank Handle to make raising and lowering your lights an easy and effortless process. Due to its robust steel construction, and 70mm centre-column, this stand can take loads of up to 40kg, making it ideal for these types of lights. It also features a single riser and can extend up to 280cm in height, combined with its large footprint diameter of 110cm, to ensure maximum stability. Perfect for use in any broadcast and tv studio, as well as on movie production sets.

GBP 999.00
1

322cm Dual-Riser Stainless Steel Junior-Pin Combo Stand with Levelling Leg

322cm Dual-Riser Stainless Steel Junior-Pin Combo Stand with Levelling Leg

The PIXAPRO 322cm Super Heavy Duty Stainless Steel Combo Stand with Levelling Legs is an essential piece of kit for the modern video or photography studio. Featuring both a 1-1/8th-inch Junior-Pin Receiver and a Retractable 5/8-inch Baby Pin connector, it can be used with virtually any studio light fixture, from studio strobes and COB LED lights, as well as larger Cinema and Broadcast quality HMIs, Lightanks, and large Cinema COB lights with large modifiers. The perfect tool for Cinematographers, DOPs, and Gaffers, as well as portrait, beauty, product, fashion, and commercial photographers, whether you're in the studio or on location. The PIXAPRO 322cm Super Heavy Duty Stainless Steel Combo Stand with Levelling Legs is ideal for Cinematographers, DOPs, and Gaffers, as well as for Commercial, product, portrait, fashion, and beauty photographers who require a highly durable light stand that can be used on uneven terrain.

GBP 169.99
1

173cm Master Wheeled Junior Pin Wind Up Stand With 1 Riser (SPECIAL ORDER)

173cm Master Wheeled Junior Pin Wind Up Stand With 1 Riser (SPECIAL ORDER)

The PIXAPRO 173cm Single-Riser Wind-Up Stand is a Super Heavy Duty Stainless Steel Light Stand, designed for use with larger and heavier studio light fixtures that feature a 1-1/8” junior-pin connector such as HMIs such as ARRI lights, LED Light banks, and High-powered COB LED Light heads. Since these types of lights are typically very heavy, this stand features a Geared Crank Handle to make raising and lowering your lights an effortless process. Due to its robust steel construction, and 70mm centre column, this stand can take loads of up to 80kg, making it ideal for these types of lights. It also features 4-risers, allowing it to be extended up to 173cm in height, combined with its large footprint diameter of 110cm, to ensure maximum stability. Perfect for use in any broadcast and TV studio, as well as on movie production sets. The PIXAPRO 173cm Wind-Up Stand is the perfect addition to any lighting gaffer’s or cinematographer’s studio grip arsenal. It enables you to mount some of the heaviest light and modifier combinations or banks of lights at heights of up to 173cm. Its robust geared crank handle enables you to effortlessly raise or lower your light without breaking a sweat. An essential piece of kit for any Broadcasting studio, or on any TV or movie production set.

GBP 999.99
1

406cm Master Pro Heavy-Duty 3-Riser Geared Junior Pin Wind-up Stand (SPECIAL ORDER)

406cm Master Pro Heavy-Duty 3-Riser Geared Junior Pin Wind-up Stand (SPECIAL ORDER)

The PIXAPRO 406cm 3-Riser Wind-Up Stand is a Super Heavy Duty Stainless Steel Light Stand, designed for use with larger and heavier studio light fixtures that feature a 1-1/8” junior-pin connector such as HMIs such as ARRI lights, LED Light banks, and High-powered COB LED Light heads. Since these types of lights are typically very heavy, this stand features a Geared Crank Handle to make raising and lowering your lights an effortless process. Due to its robust steel construction, and 70mm centre column, this stand can take loads of up to 65kg, making it ideal for these types of lights. It also features 3-risers, allowing it to be extended up to 406cm in height, combined with its large footprint diameter of 220cm, to ensure maximum stability. Perfect for use in any broadcast and TV studio, as well as on movie production sets. The PIXAPRO 406cm Wind-Up Stand is the perfect addition to any lighting gaffer’s or cinematographer’s studio grip arsenal. It enables you to mount some of the heaviest light and modifier combinations or banks of lights at heights of up to 406cm. Its robust geared crank handle enables you to effortlessly raise or lower your light without breaking a sweat. An essential piece of kit for any Broadcasting studio, or on any TV or movie production set.

GBP 2499.00
1