23 results (0,13850 seconds)

Show all filters

Brand

Gender

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Panasonic M12 x 1 Inductive Proximity Sensor - Barrel, 2 mm Detection, IP67, IP69K

Panasonic M12 x 1 Inductive Proximity Sensor - Barrel, 2 mm Detection, IP67, IP69K

Panasonic M12 x 1 Inductive Proximity Sensor - Barrel, 2 mm Detection, IP67, IP69K, Terminal Type: M12 - 4 Pin, Supply Voltage: 12 → 24 V dc, Length: 50mm, Maximum DC Voltage: 24V, Mounting Type: Flush Mount, Switching Current: 500 μA, Housing Material: Brass Nickel Plated, PPS, Maximum Operating Temperature: +70°C, Maximum Switching Frequency: 1kHz, Minimum Operating Temperature: -25°C, MPN: GX-M12A-U-Z

GBP 38.37
1

Panasonic Diffuse Photoelectric Sensor Block Sensor, 70 mm → 300 mm Detection Range

Panasonic Diffuse Photoelectric Sensor Block Sensor, 70 mm → 300 mm Detection Range

Panasonic Diffuse Photoelectric Sensor Block Sensor, 70 mm → 300 mm Detection Range, Output Type: NPN, Electrical Connection: M12 Connector, Maximum DC Voltage: 24V, Light Source: LED, IP Rating: IP67, Response Time: 1 ms, Housing Material: PBT, Maximum Operating Temperature: +55°C, Minimum Operating Temperature: -25°C, Mounting Type: Panel Mount, Priced to Clear: Yes, Series: CX-400, MPN: CX-423-P-J

GBP 189.66
1

Panasonic EY76A1LJ Smart Brushless Impact Driver 18V 2 x 5.0AH Li-Ion

Panasonic EY76A1LJ Smart Brushless Impact Driver 18V 2 x 5.0AH Li-Ion

The Panasonic EY76A1 Smart Brushless Impact Driver has an improved air flow design for increased durability, even under heavy load. The airflow provides efficient cooling to the centre of the coils as well as around the motor. DASH mode allows the unit to reach full speed instantly, ideal for drilling wood without pilot holes or super fast driving without damaging screw heads. It has an ultra-compact body design with increased impact protection as well as an ergonomic soft grip for user comfort. Fitted with a one touch bit holder with a tapering collar design that makes accessory changing quick and simple. It also features a dual LED work light that helps avoid shadowing on your work. Compatible with both 14.4V and 18V Panasonic batteries. Specifications: Chuck: 6.35mm (1/4in).No Load Speed: 0-950/0-1,450/0-2,800/min.Impact Rate: 0-1,800/0-2,500/0-3,100/bpm.Torque: 26/150/170Nm.Capacity: Tensile Bolt: Standard M6-M16, High M6-M12.

GBP 0.00
1

Panasonic EY76A1XT Smart Brushless Impact Driver & Systainer Case 18V Bare Unit

Panasonic EY76A1XT Smart Brushless Impact Driver & Systainer Case 18V Bare Unit

The Panasonic EY76A1 Smart Brushless Impact Driver has an improved air flow design for increased durability, even under heavy load. The airflow provides efficient cooling to the centre of the coils as well as around the motor. DASH mode allows the unit to reach full speed instantly, ideal for drilling wood without pilot holes or super fast driving without damaging screw heads. It has an ultra-compact body design with increased impact protection as well as an ergonomic soft grip for user comfort. Fitted with a one touch bit holder with a tapering collar design that makes accessory changing quick and simple. It also features a dual LED work light that helps avoid shadowing on your work. Compatible with both 14.4V and 18V Panasonic batteries. Specifications: Chuck: 6.35mm (1/4in).No Load Speed: 0-950/0-1,450/0-2,800/min.Impact Rate: 0-1,800/0-2,500/0-3,100/bpm.Torque: 26/150/170Nm.Capacity: Tensile Bolt: Standard M6-M16, High M6-M12.

GBP 239.99
1

Panasonic EY76A1PN Smart Brushless Impact Driver 18V 2 x 3.0Ah Li-ion PAN76A1PN

Panasonic EY76A1PN Smart Brushless Impact Driver 18V 2 x 3.0Ah Li-ion PAN76A1PN

The Panasonic EY76A1 Smart Brushless Impact Driver has an improved air flow design for increased durability, even under heavy load. The airflow provides efficient cooling to the centre of the coils as well as around the motor. DASH mode allows the unit to reach full speed instantly, ideal for drilling wood without pilot holes or super fast driving without damaging screw heads. It has an ultra-compact body design with increased impact protection as well as an ergonomic soft grip for user comfort. Fitted with a one touch bit holder with a tapering collar design that makes accessory changing quick and simple. It also features a dual LED work light that helps avoid shadowing on your work. Compatible with both 14.4V and 18V Panasonic batteries. Specifications: Chuck: 6.35mm (1/4in).No Load Speed: 0-950/0-1,450/0-2,800/min.Impact Rate: 0-1,800/0-2,500/0-3,100/bpm.Torque: 26/150/170Nm.Capacity: Tensile Bolt: Standard M6-M16, High M6-M12.

GBP 419.99
1

Panasonic EYC231PN Twin Pack 18V 2 x 3.0AH Li-Ion

Panasonic EYC231PN Twin Pack 18V 2 x 3.0AH Li-Ion

The Panasonic EYC231PN Twin Pack contains the following: 1 x 18V EY74A3 Smart Brushless Drill Driver automatically adjusts between a fast rotation speed for lighter work and higher torque whenever the load increases. This enables appropriate torque and rotation for any task. For maximum convenience and accuracy, the new tapping mode allows automatic reverse without having to change the toggle. Chuck: 13mm KeylessNo Load Speed: 20-530/70-1,800/min.Max. Torque: 50Nm, 18 Settings 1 x 18V EY76A1 Smart Brushless Impact Driver with DASH mode, this allows the unit to instantly reach full speed. It has an ultra-compact body design with increased impact protection as well as an ergonomic soft grip for user comfort. Fitted with a one touch bit holder with a tapering collar design that makes accessory changing quick and simple. Chuck: 6.35mm (1/4in)No Load Speed: 0-950/0-1,450/0-2,800/min.Impact Rate: 0-1,800/0-2,500/0-3,100/min.Torque: 26/150/170NmCapacity: Tensile Bolt: Standard M6-M16, High M6-M12 Also supplied with: 2 x 18V Li-ion Batteries, 1 x Charger and 1 x Systainer Case.

GBP 569.99
1

Panasonic EY75A8PN2G 1/2in Impact Wrench & Systainer Case 18V 2 x 3.0AH Li-Ion

Panasonic EY75A8PN2G 1/2in Impact Wrench & Systainer Case 18V 2 x 3.0AH Li-Ion

The Panasonic EY75A8 1/2in Impact Wrench has a newly designed hammer mechanism that tightens to M16 and pre-tightens to M20, with equal torque in forward or reverse for speedy assembly and disassembly. It has a compact, lightweight design provides easy handling when working in tight spaces or when using longer sockets. Bumper protection has been increased to reduce wear on housing surfaces, a tougher rubber helps avoid oil and solvent damage to grip areas. Improved metal battery contact liners provide extra durability in serial use applications. Jobsites make tough demands on Power Tools. Unexpected water contact or exposure to dust can cause a malfunction of the tool leading to trouble and delays. Panasonic have developed the Tough Tool IP range for exceptional resistance to water and dust. Tough Tool IP is a reassuring presence in the most difficult conditions. Compatible with both 14.4V and 18V Panasonic batteries. Specifications: Bit Holder: 1/2in Square Drive with Ball Detent.No Load Speed: 0-1,000/0-1,500/0-2,500/min.Impact Rate: 0-1,900/0-2,900/0-3,600/bpm.Max. Torque: 280Nm.Tensile Bolt Capacity: Standard M6-M16, High M6-M12.

GBP 419.99
1

Panasonic EYC241PN2G3 Twin Pack 18V 2 x 3.0Ah Li-ion PANC241PN

Panasonic EYC241PN2G3 Twin Pack 18V 2 x 3.0Ah Li-ion PANC241PN

The Panasonic EYC241PN2G3 Twin Pack contains the following 1 x 18V EY79A3 Smart Brushless Combi Drill Driver. Automatically adjusts the speed of the drill to the torque being exerted, for optimum efficiency. Tough-Tool IP rated against dirt and dust ingress encountered on site. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. No Load Speed 20-530/70-1,800/min. Torque Settings 18 Torque Stalling Low/High 32/12Nm, Instant Low/High 50/40Nm 1 x 18V EY76A1 Smart Brushless Impact Driver with DASH mode, this allows the unit to instantly reach full speed. It has an ultra-compact body design with increased impact protection as well as an ergonomic soft grip for user comfort. Fitted with a one-touch bit holder with a tapering collar design that makes accessory changing quick and simple. Chuck 6.35mm (1/4in) No Load Speed 0-950/0-1,450/0-2,800/min. Impact Rate 0-1,800/0-2,500/0-3,100/min. Torque 26/150/170Nm Capacity Tensile Bolt Standard M6-M16, High M6-M12 Also supplied with 2 x 18V 3.0Ah Li-ion Batteries, 1 x Charger and 1 x Systainer Case.

GBP 599.99
1

Panasonic EYC242LJ2G31 Twin Pack 18V 2 x 5.0Ah Li-ion PANC242LJ

Panasonic EYC242LJ2G31 Twin Pack 18V 2 x 5.0Ah Li-ion PANC242LJ

The Panasonic EYC242LJ2G31 Twin Pack contains the following 1 x 18V EY79A3 Smart Brushless Combi Drill drills holes easily with grip torque control, ensuring good progress, even under heavy load. The drill adjusts automatically between a fast rotation speed for lighter work and higher torque whenever the load increases. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. No Load Speed 20-530/70-1,800/min. Torque Settings 18 Torque Stalling Low/High 32/12Nm, Instant Low/High 50/40Nm 1 x 18V EY75A8 1/2in Impact Wrench with a newly designed hammer mechanism provides equal torque in forward or reverse for speedy assembly and disassembly. Bumper protection has been increased to reduce wear on housing surfaces, a tougher rubber helps avoid oil and solvent damage to grip areas. Improved metal battery contact liners provide extra durability in serial use applications. Bit Holder 1/2in Square Drive with Ball Detent No Load Speed 0-1,000/0-1,500/0-2,500/min. Impact Rate 0-1,900/0-2,900/0-3,600/bpm Max. Torque 280Nm Tensile Bolt Capacity Standard M6-M16, High M6-M12 Also supplied with 2 x 18V 5.0Ah Li-ion Batteries, 1 x EY0L82B31 Universal Li-ion Charger 14.4V-28.8V and 1 x T-Loc Carry Case.

GBP 599.99
1

Panasonic EYC242PN2G31 Twin Pack 18V 2 x 3.0Ah Li-ion PANC242PN

Panasonic EYC242PN2G31 Twin Pack 18V 2 x 3.0Ah Li-ion PANC242PN

The Panasonic EYC242 Twin Pack contains the following 1 x 18V EY79A3 Smart Brushless Combi Drill drills holes easily with grip torque control, ensuring good progress, even under heavy load. The drill adjusts automatically between a fast rotation speed for lighter work and higher torque whenever the load increases. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. No Load Speed 20-530/70-1,800/min. Torque Settings 18 Torque Stalling Low/High 32/12Nm, Instant Low/High 50/40Nm 1 x 18V EY75A8 1/2in Impact Wrench with a newly designed hammer mechanism provides equal torque in forward or reverse for speedy assembly and disassembly. Bumper protection has been increased to reduce wear on housing surfaces, a tougher rubber helps avoid oil and solvent damage to grip areas. Improved metal battery contact liners provide extra durability in serial use applications. Bit Holder 1/2in Square Drive with Ball Detent No Load Speed 0-1,000/0-1,500/0-2,500/min. Impact Rate 0-1,900/0-2,900/0-3,600/bpm Max. Torque 280Nm Tensile Bolt Capacity Standard M6-M16, High M6-M12 Also supplied with 2 x 18V 3.0Ah Li-ion Batteries, 1 x EY0L82B31 Universal Li-ion Charger 14.4V-28.8V and 1 x T-Loc Carry Case.

GBP 599.99
1