mcb.dk | Få success online

Tuff Shield Light Duty Carpet Protection Tape - Clear Protective Film - 600mm Wide Roll

Light Duty Clear Carpet Protection Film - 600mm Width - 50m or 100m Roll LengthTuff Shield light duty easy peel plastic self adhesive floor protection film designed for most carpet protection applications with light to medium foot traffic on all carpets.Easy to apply and remove by handNo residueRolls cut to sizeHeavy, medium and light duty grades available600mm wide50m and 100m LengthsFor alternative widths or lengths, or for bulk orders, please contact us on 0121 556 9900 or email us at enquiry@indasol.co.uk

GBP 7.61

1

Tuff Shield Medium Duty Carpet Protection Tape - Clear Protective Film - 600mm Wide Roll

Medium Duty Clear Carpet Protection Film - 600mm Width - 50m or 100m Roll LengthTuff Shield medium duty easy peel plastic self adhesive floor protection film designed for most carpet protection applications with light to medium foot traffic on all carpets.Easy to apply and remove by handNo residueRolls cut to sizeHeavy, medium and light duty grades available600mm wide50m and 100m LengthsFor alternative widths or lengths, or for bulk orders, please contact us on 0121 556 9900 or email us at enquiry@indasol.co.uk

GBP 8.26

1

Tuff Shield Heavy Duty Carpet Protection Tape - Clear Protective Film - 600mm Wide Roll

Heavy Duty Clear Carpet Protection Film - 600mm Width - 50m or 100m Roll LengthTuff Shield heavy duty easy-peel self-adhesive plastic carpet protection film. Designed for use in high traffic heavy footfall areas and where heavy boots may be worn on all carpet.Easy to apply and remove by handNo residueRolls cut to sizeHeavy, medium and light duty grades available600mm wide50m and 100m LengthsFor alternative widths or lengths, or for bulk orders, please contact us on 0121 556 9900 or email us at enquiry@indasol.co.uk

GBP 14.65

1

Tuskbond FC13 Foaming Carpet & Upholstery Cleaner 500ml Aerosol Can

Tuskbond FC13 Foaming Carpet and Upholstery Cleaner is a water based foaming cleaner for removing stubborn stains such as grease, grime, dirt and nicotine. FC13 effectively removes most common spots and spills and is safe for use on all hard and soft surfaces. The foaming action limits over application, leaving no sticky residue to cause re-soiling.Water Based TechnologyRemoves Stubborn StainsQuick and Easy ApplicationLeaves No Sticky Residue500ml AerosolFor more information, see FC13 Technical Data SheetPlease note that special delivery charges apply to this product.

GBP 3.50

1

TensorGrip F40 Hi-Grab Foam & Fabric Spray Adhesive Glue - 500ml Aerosol

TensorGrip F40 Foam & Fabric Adhesive Aerosol SprayAs part of our FOAM & UPHOLSTERY range, F40 is a web spray adhesive suitable carpet tile, thin fabric, thick fabric and foam applications.F40 is a highly aggressive adhesive for all demanding foam, fabric upholstery and carpet applications.F40 is a non-chlorinated high solids synthetic rubber spray grade multipurpose adhesive in canisters. F40 is designed for versatility with a long open time and high tack level with excellent strength for bonding a wide variety of substrates including foam, fabrics, upholstery, plywood, MDF and many others. F40 can also be used as a tackifier for carpet tiles.Excellent bond adhesion for a variety of materials including soft fabric, leather, most hard plastics, carpet, insulation quilt and slab to most porous and non-porous substrates, e.g. plywood, MDF, chipboard, sheet metal, etc.Tensorgrip F40 Features:HAPs free.Extremely high tack.Excellent room temperature contact bonds.Excellent green strength and good heat resistanceFast drying with long open timeExcellent bond adhesion for a variety of materials including soft fabric, leather, most hard plastics, carpet insulation quilt and slab to most porous and non-porous substrates, e.g. plywood, MDF, chipboard, sheet metal, etc.Web SprayWhat is Tensorgrip F40 Suitable For?Carpet TileFoamThick FabricThin FabricF40 Datasheets:Download Technical Datasheet For F40 AerosolF40 Chemical Technical Data: Solids Content: 30.0% +/- 2.0%Viscosity: 300 cps +/- 50 cpsSpecific Gravity: 0.66 to 0.70Failure Temp: > 95 deg. COpen time: 1 hourColour: ClearFlammability: Flammable adhesive with a flammable propellantDry time 3-5 minsSHELF LIFE 18 months from date of manufactureSize: 500ml AerosolCoverage: 3 m2 (500ml Aerosol)

GBP 8.50

1

TensorGrip F40 Hi-Grab Foam & Fabric Spray Adhesive Glue - 22 Litre Canister

TensorGrip F40 - Hi-Grab Foam & Fabric Spray AdhesiveAs part of our FOAM & UPHOLSTERY range, F40 is a web spray adhesive suitable carpet tile, thin fabric, thick fabric and foam applications.Tensorgrip F40 is a highly aggressive adhesive for all demanding foam, fabric upholstery and carpet applications.Tensorgrip F40 is a non-chlorinated high solids synthetic rubber spray grade multipurpose adhesive in canisters. Tensorgrip F40 is designed for versatility with a long open time and high tack level with excellent strength for bonding a wide variety of substrates including foam, fabrics, upholstery, plywood, MDF and many others. Can also be used as a tackifier for carpet tiles.Excellent bond adhesion for a variety of materials including soft fabric, leather, most hard plastics, carpet, insulation quilt and slab to most porous and non-porous substrates, e.g. plywood, MDF, chipboard, sheet metal, etc.Tensorgrip F40 Features:HAPs free.Extremely high tack.Excellent room temperature contact bonds.Excellent green strength and good heat resistanceFast drying with long open timeExcellent bond adhesion for a variety of materials including soft fabric, leather, most hard plastics, carpet insulation quilt and slab to most porous and non-porous substrates, e.g. plywood, MDF, chipboard, sheet metal, etc.Web SprayWhat is Tensorgrip F40 Suitable For?Carpet TileFoamThick FabricThin FabricF40 Datasheets:Download Technical Datasheet For F40 CanisterF40 Chemical Technical Data: Solids Content: 30.0% +/- 2.0%Viscosity: 300 cps +/- 50 cpsSpecific Gravity: 0.66 to 0.70Failure Temp: > 95 deg. COpen time: 1 hourColour: Clear or RedFlammability: Flammable adhesive with a flammable propellantDry time 3-5 minsSHELF LIFE 18 months from date of manufacturePlease note: Special delivery charges apply to this product and is dispatched 1 - 5 working days after your order is placed.

GBP 253.00

1

TensorGrip F40 Hi-Grab Foam & Fabric Spray Adhesive Glue - 110 Litre Canister

TensorGrip F40 - Hi-Grab Foam & Fabric Spray Adhesive - 110L CanisterAs part of our FOAM & UPHOLSTERY range, F40 is a web spray adhesive suitable carpet tile, thin fabric, thick fabric and foam applications.Tensorgrip F40 is a highly aggressive adhesive for all demanding foam, fabric upholstery and carpet applications.Tensorgrip F40 is a non-chlorinated high solids synthetic rubber spray grade multipurpose adhesive in canisters. Tensorgrip F40 is designed for versatility with a long open time and high tack level with excellent strength for bonding a wide variety of substrates including foam, fabrics, upholstery, plywood, MDF and many others. Can also be used as a tackifier for carpet tiles.Excellent bond adhesion for a variety of materials including soft fabric, leather, most hard plastics, carpet, insulation quilt and slab to most porous and non-porous substrates, e.g. plywood, MDF, chipboard, sheet metal, etc.Tensorgrip F40 Features:HAPs free.Extremely high tack.Excellent room temperature contact bonds.Excellent green strength and good heat resistanceFast drying with long open timeExcellent bond adhesion for a variety of materials including soft fabric, leather, most hard plastics, carpet insulation quilt and slab to most porous and non-porous substrates, e.g. plywood, MDF, chipboard, sheet metal, etc.Web SprayWhat is Tensorgrip F40 Suitable For?Carpet TileFoamThick FabricThin FabricF40 Datasheets:Download Technical Datasheet For F40 CanisterF40 Chemical Technical Data: Solids Content: 30.0% +/- 2.0%Viscosity: 300 cps +/- 50 cpsSpecific Gravity: 0.66 to 0.70Failure Temp: > 95 deg. COpen time: 1 hourColour: Clear or RedFlammability: Flammable adhesive with a flammable propellantDry time 3-5 minsSHELF LIFE 18 months from date of manufacturePlease note: Special delivery charges apply to this product and is dispatched 1 - 5 working days after your order is placed.

GBP 1112.00

1

Flexi Spray GF248 Aerosol - Headlining Spray Contact Adhesive - 500ml

Flexi Spray GF248 Automotive Headlining Spray Adhesive - High Heat Trim Spray for the Transportation IndustryHigh heat spray adhesive ideal for adhering our wall lining carpet to wood or metalIdeal for use in vehicle trimming applications such as head linings, door panel trims, carpet etcIt exhibits high temperature resistance up to 120 degrees C, and is extremely flexibleIt is equally effective in manufacturing or refurbishing the interiors or coaches, caravans, leisure homes, boats and other similar vehicles.500ml AerosolFlexi Spray GF248 can be used for:Vehicle Interior TrimmingCarpetsHeadliningsFabrics and Leather SeatsTrim-Fix Adhesive

GBP 3.50

1

Flexi Spray GF248 - Headlining Spray Contact Adhesive - 22 LTR

Flexi Spray GF248 Automotive Headlining Spray Adhesive - High Heat Trim Spray for the Transportation IndustryHigh heat spray adhesive ideal for adhering our wall lining carpet to wood or metalIdeal for use in vehicle trimming applications such as head linings, door panel trims, carpet etcIt exhibits high temperature resistance up to 120 degrees C, and is extremely flexibleIt is equally effective in manufacturing or refurbishing the interiors or coaches, caravans, leisure homes, boats and other similar vehicles.22 Litre Canister - also available in a 500ml Aerosol.Flexi Spray GF248 22 Litre Canister can be used for:Vehicle Interior TrimmingCarpetsHeadliningsFabrics and Leather SeatsTrim-Fix Adhesive

GBP 162.76

1

TensorGrip M50 Fast Dry Pressure Sensitive Adhesive 22 Litre Canister

TensorGrip(R) M50 is a fast drying, non-chlorinated adhesive designed for all types of upholstery, seating and wall coverings for boat/yacht interior applications in the Marine industry. M50 has been developed with an exceptional high tack and long open time making it suitable for bonding a variety of materials including carpet, foams and fabrics and many others.M50"s aggressive high tack allows for single-sided bonding in low demand upholstery seating areas for seat backs and bases.Price is for canister only. Hose and gun sold separately.Features:Extremely high-tackVery fast-dryingNon chlorinatedExcellent green strengthLong open time between bondsDeveloped for carpet tiles, fabric, foam, plywood and synthetic leather.22 Litre CanisterAlso available in a 500ml AerosolDownload technical data sheet for Tensorgrip M50Please note that special delivery charges apply to this product and is dispatched 1 - 5 working days after your order is placed.

GBP 351.85

1

Tensorgrip F20 Fast Drying Foam & Upholstery Adhesive Glue 22 Litre Canister

Tensorgrip F20 - Fast Drying Foam & Upholstery Adhesive - 22L CanisterTensorgrip F20 has been developed to provide very fast tack times for all upholstery, foam and carpet contact bonding situations. Its high solids and pressure-sensitive adhesive technology make this product highly suited for all types of production processes. The F20 is designed to give a long open time and a high tack level with good strength for general bond applications.Tensorgrip F20 Advantages & Features:Good room temperature bonds.Good green strength & heat resistance.Strong bond adhesion for various materials; soft fabric, leather, most hard plastic, insulation quilt & slab and carpet to most porous & non-porous substrate such as plywood, MDF, chipboard, etc.Web SprayBonded square metre coverage 80m2What is Tensorgrip F20 Suitable For?FoamCarpetFabricUpholsteryF20 Datasheets:Download Technical Datasheet For F20 CanisterDownload Safety Datasheet For F20 CanisterPlease note: Special delivery charges apply to this product and is dispatched 1 - 5 working days after your order is placed.Demonstration Video - How To Bond Fabric To Foam Using Tensorgrip F20 Canister:

GBP 177.05

1

Tensorgrip F20 Fast Drying Foam & Upholstery Adhesive Glue 110 Litre Canister

Tensorgrip F20 - Fast Drying Foam & Upholstery Adhesive - 110L CanisterTensorgrip F20 has been developed to provide very fast tack times for all upholstery, foam and carpet contact bonding situations. Its high solids and pressure-sensitive adhesive technology make this product highly suited for all types of production processes. The F20 is designed to give a long open time and a high tack level with good strength for general bond applications.Tensorgrip F20 Advantages & Features:Good room temperature bonds.Good green strength & heat resistance.Strong bond adhesion for various materials; soft fabric, leather, most hard plastic, insulation quilt & slab and carpet to most porous & non-porous substrate such as plywood, MDF, chipboard, etc.Web Spray110 Litre Canister bonded square metre coverage - 400m2What is Tensorgrip F20 Suitable For?FoamCarpetFabricUpholsteryF20 Datasheets:Download Technical Datasheet For F20 CanisterDownload Safety Datasheet For F20 CanisterPlease note: Special delivery charges apply to this product and is dispatched 1 - 5 working days after your order is placed.Demonstration Video - How To Bond Fabric To Foam Using Tensorgrip F20 Canister:

GBP 782.00

1

TensorGrip M84 High Tack Multi-Purpose Spray Adhesive Glue - 22 Litre Canister

TensorGrip - M84 - High Tack Multi-Purpose Spray AdhesiveBonding carpet and thick fabric applications for interior trim and re-trim in the Marine Industry has never been easier with the TensorGrip(R) M84, a high-quality and high tack spray adhesive. The super-high tack and pressure-sensitive properties of the M84 make it perfect for applying any materials in overhead and vertical operations.Price is for canister only. Hose and gun sold separately.Tensorgrip M84 Features:Super high tackRapid drying with excellent open timeHigh-quality bond adhesion for fabrics, carpets and foam materialsCan be used for carpet, thick fabric, foam, plywood and cork.Tensorgrip M84 Datasheet:Download Technical Data Sheet for Tensorgrip M84Tensorgrip M84 Chemical Technical DataViscosity - 300 cps 25 deg. C sp# 30r.p.m.Total Solids - 28.0% +/- 2%Colour - ClearSystem Flammability - Non-flammable adhesive in flammable propellantShear > 150 p.s.i.Tensile (180 deg. Peel) > 25 p.s.i.Shear adhesion failure temp (SAFT) 100gram > 105 deg. CDry time - 1-3 mins dependant on temp & humidityOpen time - LongSHELF LIFE: 18 months from date of manufacturePlease note that special delivery charges apply to this product and is dispatched 1 - 5 working days after your order is placed.

GBP 293.37

1

TensorGrip F32 Foam & Upholstery Spray Adhesive Glue - 22 Litre Canister

TensorGrip F32 - Foam & Upholstery Spray AdhesiveAs part of our FOAM & UPHOLSTERY range, F32 is a web spray adhesive suitable for fabric, thick fabric, thin fabric, foam and carpet applications.TensorGrip F32 is a fast dry, tacky spray adhesive designed for bonding a variety of common materials used in the foam and upholstery industry. TensorGrip F32 has good temperature resistance and strong bond adhesion on materials including thick and thin fabrics, carpet tiles and foams to core substrates like plywood, MDF and chipboard.Tensorgrip F32 Features:Good temperature resistance - 105 deg. C.Excellent initial grab.Excellent for cushion making / bull nosing.High integrity bond adhesion on all common foam and upholstery materials.What is Tensorgrip F32 Suitable For?Fabric,Thick fabricThin fabricFoamCarpet applicationsF32 Datasheets:Download Technical Datasheet For F32 CanisterF32 Chemical Technical Data: Viscosity - 300 cps 25 deg. C sp#2, 30r.p.m.Total Solids - 28.0%Colour - Clear or RedSystem Flammability - Non flammable adhesive in flammable propellantShear > 150 p.s.i.Tensile (180 deg. Peel) > 25 p.l.i.Shear adhesion failure temp. (SAFT) 100gram> 105 deg. CDry time - 2-3 mins dependant on temp & humidityOpen time - LongSHELF LIFE - 18 months from date of manufacturePlease note: Special delivery charges apply to this product and is dispatched 1 - 5 working days after your order is placed.

GBP 140.00

1

Tuskbond Tack200 Sprayable Surface Tackifier Adhesive Glue Aerosol 500ml

Tuskbond Tack200 tackifier spray adhesive is a high solids spray adhesive with a high tack formulation. It is formulated, once dry, to provide a permanently tacky film making it suitable for carpet tiles as well as a wide variety of substrates to subfloors. Tack200 boasts extremely high coverage, designed as a one way stick applied directly to the floor.10m2 Coverage - Calculation based on 5g per m2 coat weightHigh Tack Formulation, Non-Chlorinated, Low OdourFast and Easy Application, High Solids500ml AerosolAlso available in a 13kg canisterDownload Technical Datasheet for Tuskbond Tack200 AerosolDownload Safety Datasheet for Tuskbond Tack200 AerosolPlease note that special delivery charges apply to this product and is dispatched 3 - 5 days after order placed.

GBP 5.40

1

Tuskbond Tack200 Sprayable Surface Tackifier Adhesive Canister 13kg

Tuskbond Tack200 tackifier spray adhesive is a high solids spray adhesive with a high tack formulation. It is formulated, once dry, to provide a permanently tacky film making it suitable for carpet tiles as well as a wide variety of substrates to subfloors. Tack200 boasts extremely high coverage, designed as a one way stick applied directly to the floor.Price is for canister only. Hose and gun sold separately.500m2 Coverage - Calculation based on 5g per m2 coat weightHigh Tack Formulation, Non-Chlorinated, Low OdourFast and Easy Application, High Solids13kg CanisterAlso available in a 500ml aerosolDownload Technical Datasheet for Tuskbond Tack200 CanisterDownload Safety Datasheet for Tuskbond Tack200 CanisterPlease note: Special delivery charges apply to this product and is dispatched between 1 - 5 working days after the order is placed.

GBP 194.00

1

Indasol PROBONDER Contact Spray Adhesive Glue - 22L Canister

PROBONDER Contact Spray AdhesivePROBONDER will bond to a wide variety of subfloors including concrete, sand / cement screed, plywood, flooring grade chipboard and hardboard. It is ideal for permanent bonds that require good initial bond strength. It provides good temperature resistance and, if protected from contamination, has an open time of several hours. PROBONDER provides an aggressive, fast, strong and permanent waterproof bond. Suitable for use with synthetic backed, gel backed and felt backed carpets, carpet tiles, underlay and associated products. Always test a small sample of the materials first to ensure the suitability of the product for the application. For instance, some vinyls contain large amounts of plasticiser which, over time, can migrate and soften the bond. Do not use on flexible PVC or expanded polystyrenePROBONDER Contact Adhesive AdvantagesHigh Strength Bond Achieved in MinutesGood Heat ResistanceExcellent GrabLong Open TimePROBONDER Applications & Uses:Standard LaminatingMDFWood Build UpsChipboardPlyAluminiumCement ScreedCarpetFlooring TilesDatasheetsPROBONDER Contact Adhesive TDS DownloadTechnical Information:Solvent: DichloromethanePropellant: HydrocarbonSolids Content: (approx) 25-30%Spray Pattern: WebColour: ClearCoverage: (17kg canister) - 128m~ (Dry CoatWeight of 25g/sm)VOC 718g/1Heat Resistance (SAFT) >100 deg. CAvailable sizes: 17kg

GBP 125.00

1

Indasol PROBONDER Contact Spray Adhesive Glue - 500ml Aerosol

PROBONDER Contact Spray Adhesive 500ml AerosolPROBONDER will bond to a wide variety of subfloors including concrete, sand / cement screed, plywood, flooring grade chipboard and hardboard. It is ideal for permanent bonds that require good initial bond strength. It provides good temperature resistance and, if protected from contamination, has an open time of several hours. PROBONDER provides an aggressive, fast, strong and permanent waterproof bond. Suitable for use with synthetic backed, gel backed and felt backed carpets, carpet tiles, underlay and associated products. Always test a small sample of the materials first to ensure the suitability of the product for the application. For instance, some vinyls contain large amounts of plasticiser which, over time, can migrate and soften the bond. Do not use on flexible PVC or expanded polystyrenePROBONDER Contact Adhesive AdvantagesHigh Strength Bond Achieved in MinutesGood Heat ResistanceExcellent GrabLong Open TimePROBONDER Applications & Uses:Standard LaminatingMDFWood Build UpsChipboardPlyAluminiumCement ScreedCarpetFlooring TilesDatasheetsPROBONDER Contact Adhesive TDS DownloadTechnical Information:Solvent: DichloromethanePropellant: HydrocarbonSolids Content: (approx) 25-30%Spray Pattern: WebColour: ClearWeight of 25g/sm)VOC 718g/1Heat Resistance (SAFT) >100 deg. CSize: 500ml Aerosol

GBP 3.65

1

TensorGrip H50 Hi-Temp Polystyrene Adhesive Glue - 500ml Aerosol

TensorGrip H50 - Hi-Temp Polystyrene AdhesiveAs part of our HVAC & INSULATION range, H50 is suitable for polystyrene and foam insulation materials where a higher temperature is required.TensorGrip(R) H50 is a hi-temp, polystyrene compatible spray adhesive developed to bond insulation materials to themselves and to a variety of substrates, including MDF, chipboard, plywood and many other timber sheet materials. H50 can also be used for bonding to sheet metal substrates where surface preparation is important.Tensorgrip H50 Features:Excellent rubber bonding propertiesHeat resistant up to 106 deg. CFast drying with good open timeExcellent bond adhesion for fabrics, leather, carpet, foam, etc. to metal, hard plastic, plywood, etcWeb SprayWhat is Tensorgrip H50 Suitable For?FRP/GRPPolystyreneH50 Datasheets:Download Technical Datasheet For H50 CanisterH50 Chemical Technical Data:Solids Content: 30.0% +/- 2.0%Viscosity: 300 cps +/- 50 cpsSpecific Gravity: 0.66 to 0.70Failure Temp: > 106 deg. COpen time: 1 hourColour: Clear or GreenFlammability: Flammable adhesive with a flammable propellantDry time 1-3 minsSHELF LIFE: 18 months from date of manufacturePlease note: Special delivery charges apply to this product and is dispatched 1 - 5 working days after your order is placed.

GBP 9.52

1

TensorGrip H50 Hi-Temp Polystyrene Adhesive Glue - 22 Litre Canister

TensorGrip H50 - Hi-Temp Polystyrene AdhesiveAs part of our HVAC & INSULATION range, H50 is suitable for polystyrene and foam insulation materials where a higher temperature is required.TensorGrip(R) H50 is a hi-temp, polystyrene compatible spray adhesive developed to bond insulation materials to themselves and to a variety of substrates, including MDF, chipboard, plywood and many other timber sheet materials. H50 can also be used for bonding to sheet metal substrates where surface preparation is important.Tensorgrip H50 Features:Excellent rubber bonding propertiesHeat resistant up to 106 deg. CFast drying with good open timeExcellent bond adhesion for fabrics, leather, carpet, foam, etc. to metal, hard plastic, plywood, etcWeb SprayWhat is Tensorgrip H50 Suitable For?FRP/GRPPolystyreneH50 Datasheets:Download Technical Datasheet For H50 CanisterH50 Chemical Technical Data:Solids Content: 30.0% +/- 2.0%Viscosity: 300 cps +/- 50 cpsSpecific Gravity: 0.66 to 0.70Failure Temp: > 106 deg. COpen time: 1 hourColour: Clear or GreenFlammability: Flammable adhesive with a flammable propellantDry time 1-3 minsSHELF LIFE: 18 months from date of manufacturePlease note: Special delivery charges apply to this product and is dispatched 1 - 5 working days after your order is placed.

GBP 270.00

1

TensorGrip H50 Hi-Temp Polystyrene Adhesive Glue - 110 Litre Canister

TensorGrip H50 110 Litre Canister - Hi-Temp Polystyrene AdhesiveAs part of our HVAC & INSULATION range, H50 is suitable for polystyrene and foam insulation materials where a higher temperature is required.TensorGrip(R) H50 is a hi-temp, polystyrene compatible spray adhesive developed to bond insulation materials to themselves and to a variety of substrates, including MDF, chipboard, plywood and many other timber sheet materials. H50 can also be used for bonding to sheet metal substrates where surface preparation is important.Tensorgrip H50 Features:Excellent rubber bonding propertiesHeat resistant up to 106 deg. CFast drying with good open timeExcellent bond adhesion for fabrics, leather, carpet, foam, etc. to metal, hard plastic, plywood, etcWeb SprayWhat is Tensorgrip H50 Suitable For?FRP/GRPPolystyreneH50 Datasheets:Download Technical Datasheet For H50 CanisterH50 Chemical Technical Data:Solids Content: 30.0% +/- 2.0%Viscosity: 300 cps +/- 50 cpsSpecific Gravity: 0.66 to 0.70Failure Temp: > 106 deg. COpen time: 1 hourColour: Clear or GreenFlammability: Flammable adhesive with a flammable propellantDry time 1-3 minsSHELF LIFE: 18 months from date of manufactureSize: 110 LitrePlease note: Special delivery charges apply to this product and is dispatched 1 - 5 working days after your order is placed.

GBP 0.00

1

TensorGrip F11 HP Non-MECL Foam Bonding Adhesive Glue - 22 Litre Canister

TensorGrip F11 HP Non-MECL Foam Bonding Adhesive - 22 Litre CanisterAs part of our FOAM & UPHOLSTERY range, F11 is a low-VOC, web spray adhesive that is moisture resistant. It is suitable for bonding carpet, foam, rubber, fabric and synthetic leather.TensorGrip(R) F11 NON-MECL LOW VOC is a revolutionary, high performance plasticiser resistant adhesive, specially formulated to bond all commonly used substrates found within the foam and upholstery industry. The F11 will bond vinyl, rubber, leathers and plastics, as in the past this was not possible because of the leeching plasticisers migrating from the vinyl"s causing delamination. F11 is unique due to it capability to bond foams and fabric single sided when in conjunction with nip rollers.TensorGrip F11 Features:100% resistant to delamination caused by plasticiser migrationHigh temperature resistance - up to 155 deg. CVery Good Green StrengthFast tack timeSuper smooth web sprayWill bond many fabrics to difficult substrates.Very high solidsSingle sided bondingWaterproofWhat is Tensorgrip F11 Suitable For?CarpetFabricFoamRubberSynthetic LeatherF11 Technical Datasheet:Download F11 Datasheet PDFPlease note: Special delivery charges apply to this product and is dispatched 1 - 5 working days after your order is placed.

GBP 332.08

1

TensorGrip H10N Non-Flam Insulation Spray Adhesive Glue - 22 Litre Canister

TensorGrip H10N Non-Flammable Insulation Spray Adhesive - 22 Litre CanisterTensorgrip H10N is a non-flammable, high solids, multi-purpose adhesive designed to bond quilt, fibrous insulation materials and fabrics to duct work in HVAC markets.H10N is a versatile high tack adhesive with a long open time and excellent strength for bonding a wide variety of substrates including fabrics, upholstery, foam, plywood, MDF and many others.H10N Features:CO-REZ TechnologyWeb SprayZERO-FLAM TechnologyFast, high tackExcellent room temperature bondsHeat resistant up to 106 deg. CFast drying with good open timeExcellent bond adhesion for fabrics, leather, carpet, foam, etc. to metal, hard plastic, plywood, etcCoverage - 85m2 (22L Canister)Colour - Clear / GreenWhat is Tensorgrip H10N Suitable For?FRP / GRPH10N Datasheets:Download Technical Datasheet For H10N CanisterH10N Chemical Technical Data:* Viscosity 300 cps 25 deg. C sp#2, 30r.p.m.* Total Solids 28.0% +/- 2%* Colour Clear* System Flammability Non-flammable adhesive in flammable propellant* Shear > 150 p.s.i.* Tensile (180 deg. Peel) > 25 p.l.i.* Shear adhesion failure temp. (SAFT) 100gram> 105 deg. C* Dry time 1-3 mins dependant on temp & humidity* Open time Long* SHELF LIFE: 18 months from date of manufacturePlease note: Special delivery charges apply to this product and is dispatched 1 - 5 working days after your order is placed.

GBP 245.60

1

Tensorgrip F60 High Grab Foam & Fabric Spray Adhesive Glue - 500ml Aerosol

Tensorgrip F60 High Grab Foam & Fabric Spray Adhesive Aerosol Spray 500mlTensorgrip F60 is a non-chlorinated, high performance spray adhesive designed for bonding foams, fabrics and upholstery materials to many common core substrates in foam and upholstery applications. High tack properties make this adhesive ideal for bonding thick fabrics and foams and other thick, high demanding materials where good grab and strong bond adhesion are required. ALWAYS test TensorGrip F60 to determine suitability for application prior to use in production.NOT RECOMMENDED for use with plasticised vinyls, flexible plastics, PE or PP.Tensorgrip F60 Features:High tack.Excellent room temperature contact bonds.Excellent green strength and good heat resistance.Fast drying with long open time.Excellent bond adhesion for a variety of materials including soft fabric, leather, most hard plastics, carpet insulation quilt and slab to most porous and non-porous substrates, e. g. plywood, MDF, chipboard, sheet metal, etc.Colour: Clear / GreenWhat is Tensorgrip F60 500ml Suitable For?CarpetFoamFabricSynthetic LeatherF60 500ml Datasheets:Download Technical Datasheet For F60 AerosolF60 500ml Chemical Technical Data: Total Solids 30.0% +/- 2.0%Colour Clear or GreenSystem Flammability Flammable adhesive in a flammable propellantShear 832NPeel 25NHeat Resistance 95 deg. CShear Adhesion Failure Temp(SAFT) 100grams > 80 deg. CFlash-Off 2 - 4 minsOpen time Up to 30 minutes depending on temperature and humidityShelf Life 18 months from date ofmanufactureCoverage: 3m2 (500ml Aerosol)

GBP 9.50

1

Tensorgrip F60 High Grab Foam & Fabric Spray Adhesive Glue - 22L Canister

Tensorgrip F60 High Grab Foam & Fabric Spray Adhesive CanisterTensorgrip F60 is a non-chlorinated, high performance spray adhesive designed for bonding foams, fabrics and upholstery materials to many common core substrates in foam and upholstery applications. High tack properties make this adhesive ideal for bonding thick fabrics and foams and other thick, high demanding materials where good grab and strong bond adhesion are required. ALWAYS test TensorGrip F60 to determine suitability for application prior to use in production.NOT RECOMMENDED for use with plasticised vinyls, flexible plastics, PE or PP.Tensorgrip F60 22L Features:High tack.Excellent room temperature contact bonds.Excellent green strength and good heat resistance.Fast drying with long open time.Excellent bond adhesion for a variety of materials including soft fabric, leather, most hard plastics, carpet insulation quilt and slab to most porous and non-porous substrates, e. g. plywood, MDF, chipboard, sheet metal, etc.Colour: Clear / GreenWhat is Tensorgrip F60 22L Suitable For?CarpetFoamFabricSynthetic LeatherF60 22L Datasheets:Download Technical Datasheet For F60 CanisterF60 22L Chemical Technical Data: Total Solids 30.0% +/- 2.0%Colour Clear or GreenSystem Flammability Flammable adhesive in a flammable propellantShear 832NPeel 25NHeat Resistance 95 deg. CShear Adhesion Failure Temp(SAFT) 100grams > 80 deg. CFlash-Off 2 - 4 minsOpen time Up to 30 minutes depending on temperature and humidityShelf Life 18 months from date ofmanufactureCoverage: 80m2 - 22L Canister

GBP 264.10

1

DIGITAL MARKETING

Brand

Merchant

Price (EUR)