5 results (0,13603 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Notifier Round 5 inch Ceiling Loudspeaker LSC-506

Notifier Round 5 inch Ceiling Loudspeaker LSC-506

Notifier Round 5 inch Ceiling Loudspeaker LSC-506All Notifier loudspeakers have built in protection to ensure that any damage to the loudspeakers does not result in a failure of the loudspeaker circuit so the integrity of the system is maintained for alert or instruction messages to still be delivered from loudspeakers on the same circuit in other areas. This ensures full compliance to BS5839 part 8.The loudspeakers are easily installed using the mounting spring on the unit and the fire dome then slides into place. The unique flying lead wiring arrangement in our loudspeakers makes their installation very easy. The loudspeakers are equipped with ceramic terminal blocks a thermal fuse and heat resistant high temperature wiring to comply with EN54 part 24.

GBP 47.86
1

Notifier WST-PC-I02 Addressable Wall VAD Clear Lens with Red Flash

Notifier WST-PC-I02 Addressable Wall VAD Clear Lens with Red Flash

Notifier WST-PC-I02 Addressable Wall VAD Clear Lens with Red FlashNotifiers Wall or Ceiling mount Visual Alarm Device VAD is a high-quality loop powered beacon intended to alert building occupants of an emergency. Designed and approved to meet EN54-23 the European standard for VADs the device generates 360-degree light coverage making it suitable for both wall and ceiling mount applications.Featuring fast and simple installation and control they are powered by the fire panel via the loop wiring. Control of the devices is enabled using on-board switches or via the control panel. The range is installed simply by a twist fit onto the B501AP base. The Opal wallceiling mount VAD is a high-quality loop powered device which when triggered by the fire panel emits an intense light to give a visible warning to building occupants.Key FeaturesRed FlashPure White BodyClear LensWith Isolator

GBP 48.26
1

Notifier 6.5quot Ceiling Loudspeaker W DC Blocking Capacitor LSC-606DC

Notifier 6.5quot Ceiling Loudspeaker W DC Blocking Capacitor LSC-606DC

Notifier 6.5 Ceiling Loudspeaker W DC Blocking Capacitor LSC-606DCAll Notifier loudspeakers have built in protection to ensure that any damage to the loudspeakers does not result in a failure of the loudspeaker circuit so the integrity of the system is maintained for alert or instruction messages to still be delivered from loudspeakers on the same circuit in other areas. This ensures full compliance to BS5839 part 8.The loudspeakers are easily installed using the mounting spring on the unit and the fire dome then slides into place. The unique flying lead wiring arrangement in our loudspeakers makes their installation very easy. The loudspeakers are equipped with ceramic terminal blocks a thermal fuse and heat resistant high temperature wiring to comply with EN54 part 24.Technical SpecificationsElectricalMax power 9 WRated power 6 WPower taps 70V 3 W 1.5 W 0.75 W 0.375 WPower taps 100V 6 W 3 W 1.5 W 0.75 WSPL at 1W1M 100 Hz - 10 KHz 91dBSPL at 6W1M 100 Hz- 10 KHz 99dBFrequency range -10dB 170 Hz - 20k HzDispersion angle 1 KHz - 6dB 170Rated input voltage 100 V 70 VRated impedance 1.7k 3.3k 6.7k 13k Connection Ceramic TerminalMechanical SpecificationDimensions 222 mm 129 mmHole cut-out size 195 mmDiameter of speaker 6.5Front grill colour White RAL9003Dome colour Red RAL3000Thermal Fuse 150CDC Blocking capacitor Yes 2.2uF

GBP 87.61
1

Notifier WSO-PR-I02 Addressable Wall Mounted Sounder With Isolator

Notifier WSO-PR-I02 Addressable Wall Mounted Sounder With Isolator

Notifier WSO-PR-I02 Addressable Wall Mounted Sounder With IsolatorHigh quality loop powered device designed to alert building occupants of an emergency. Featuring fast and simple installation and control it is powered by the fire panel via the loop wiring. Control of the device is enabled using on-board switches or via the Opal digital protocol using the control panel. The range is installed simply by a twist fit onto the B501AP base.Key FeaturesFaster installation - The large cable access rear or surface cable entry options and innovative loop continuity spring all make for faster more cost effective installation.Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an anti-tamper feature giving added security.Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident.Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer.Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounderbeacon can be added without re-wiring.Reduced inventory count - Notifiers Opal AV range now utilizes the B501AP system base - common to detectors. The Opal AV range is designed to maximise the features of Notifiers advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder sounder beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.Colour Red

GBP 55.64
1

Notifier WSO-PP-I02 Addressable Wall Mounted Sounder With Isolator - White

Notifier WSO-PP-I02 Addressable Wall Mounted Sounder With Isolator - White

Notifier WSO-PP-I02 Addressable Wall Mounted Sounder With Isolator - WhiteHigh quality loop powered device designed to alert building occupants of an emergency. Featuring fast and simple installation and control it is powered by the fire panel via the loop wiring. Control of the device is enabled using on-board switches or via the Opal digital protocol using the control panel. The range is installed simply by a twist fit onto the B501AP base.Key FeaturesFaster installation - The large cable access rear or surface cable entry options and innovative loop continuity spring all make for faster more cost effective installation.Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an anti-tamper feature giving added security.Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident.Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer.Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounderbeacon can be added without re-wiring.Reduced inventory count - Notifiers Opal AV range now utilizes the B501AP system base - common to detectors. The Opal AV range is designed to maximise the features of Notifiers advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder sounder beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.

GBP 54.82
1