mcb.dk | Få success online

Notifier M700X Loop Isolator Module

Notifier M700X Loop Isolator ModuleThe M700X is a loop isolator module with plug-in screw connections and LED.

GBP 71.39

1

Notifier 020-751 Loop Booster Spare PCB

Notifier 020-751 Loop Booster Spare PCBThe Notifier 020-751 is a spare replacement PCB for the Loop Booster unit.

GBP 361.80

1

Notifier HOP-933-100 Loop License CLIP Protocol

Notifier HOP-933-100 Loop License CLIP ProtocolAn INSPIRE CLIP loop license. This is required for older devices.

GBP 334.21

1

Notifier Spare 2 loop Pearl base PCA SPR-PRL-BASE

Notifier Spare 2 loop Pearl base PCA SPR-PRL-BASESpare 2 loop Pearl base PCA

GBP 889.08

1

Notifier Spare 1 loop Pearl base PCA SPR-PRL-BASE-1

Notifier Spare 1 loop Pearl base PCA SPR-PRL-BASE-1Spare 1 loop Pearl base PCA

GBP 666.80

1

Notifier HOP-433-100 Dual Loop Module - Opal

Notifier HOP-433-100 Dual Loop Module - OpalDual Loop Module for use with the Opal range. 1 supplied and optional for extension.Key FeaturesLoop module supports 2 loops159 intelligent Opal detectors per loop159 modules AV MCP inputoutput modules per loop64 zones of fire detection with on screen zone indicationMaximum 512 fire detectors andor Manual Call Points according to to EN54-2

GBP 954.78

1

Notifier 020-588 ID2000 ID3000 Dual Loop Board Kit

Notifier 020-588 ID2000 ID3000 Dual Loop Board KitIncludes PCB for additional 2 loops and plug in cable connector. Max three modules per panel. Maximum of 512 input devices per panel using standard LIBs.

GBP 384.50

1

Notifier FLT2-AB-NF1 FAAST LT200 Notifier Loop Singkle Channel Accessories Box

Notifier FLT2-AB-NF1 FAAST LT200 Notifier Loop Singkle Channel Accessories BoxA Single Channel Accessories Box for FAAST LT-200 Standalone.

GBP 147.64

1

Notifier FLT2-AB-NF2 FAAST LT200 Notifier Loop Dual Channel Accessories Box

Notifier FLT2-AB-NF2 FAAST LT200 Notifier Loop Dual Channel Accessories BoxA Dual Channel Accessories Box for FAAST LT-200 Standalone.

GBP 147.64

1

Notifier 020-549 ID3000 Intelligent Dual Loop Board Kit E-LIB

Notifier 020-549 ID3000 Intelligent Dual Loop Board Kit E-LIBThe Notifier 020-549 is an intelligent dual loop E-Lib board kit for use with the Notifier ID3000 fire alarm system. This part allows the connection of a further 2 loops onto a Notifier ID3000 fire alarm panel - dependent on whether there is spare capacity on the panel.Please noteThis product is for purchase as a spare replacement part for existing Notifier systems.

GBP 606.78

1

Notifier ID60 Single Loop Intelligent Fire Alarm Panel 002-456

Notifier ID60 Single Loop Intelligent Fire Alarm Panel 002-456The NOTIFIER ID60 Series Single Loop intelligent fire alarm panel has been developed for both installers and end users with efficiency in mind offering a technically advanced range of facilities and functions while remaining easy to install program and operate. Three models are available in the ID60 series. The compact ID60 the ID61 with internal printer option and a larger separate power supply and the ID62 with internal printer option a larger separate power supply and added space for 72 hours battery back-up.The ID60 series supports NOTIFIERs unique Very Intelligent Early Warning VIEW technology. Combined with the patented AWACS Advance Warning Addressable Combustion Sensing and DIG Dynamic Intelligent Grouping algorithms the ID60 series provides the most cost-effective stable and reliable early warning systems without the need to use costly aspirating detection systems.With A compact enclosure 380mm x 365mm x 110mm and a single PCB with on-board power supply 1.5A the ID60 provides the user with an easy to installmaintain Fire Alarm System.Key FeaturesLPCB approved to EN54 Parts 2 and 4One loop capacity 99 sensors and 99 modules16 fire zones 16 non fire zonesSupports advanced detection such as VIEW HARSH OptiPlex HAZARD64 CBE rules10 Pre-alarm levels per sensor9 Alarm levels per sensorDrift compensationMaintenance alertAutomatic High TestDay Night mode facilityTime programsClass ChangeAutolearn facilityOne man walk test2 x 40 character backlit LCDActive and passive repeatersProgrammable from the panel keypad or PCSupports loop powered sounders relaysTwo on board sounder circuitsTwo on board configurable outputs

GBP 1015.62

1

Notifier BST-PC-I02 Addressable Loop Powered Visual Indicating Device VID Red Flash - Pure White Body - Clear Lens cw Isolator

Notifier BST-PC-I02 Addressable Loop Powered Visual Indicating Device VID Red Flash - Pure White Body - Clear Lens cw IsolatorAddressable loop powered visual indicating device VID. White body clear lens with red flash. Built in loop isolation. This product is not approved to EN54-23 Visual Alarm Device and must not be used as a visual alarm device to provide a primary warning notification of fire.Key FeaturesWhite bodyClears lensRed flash

GBP 85.26

1

Notifier ID61 Single Loop Intelligent Fire Alarm Panel 002-463

Notifier ID61 Single Loop Intelligent Fire Alarm Panel 002-463The NOTIFIER ID60 Series Single Loop intelligent fire alarm panel has been developed for both installers and end users with efficiency in mind offering a technically advanced range of facilities and functions while remaining easy to install program and operate. Three models are available in the ID60 series. The compact ID60 the ID61 with internal printer option and a larger separate power supply and the ID62 with internal printer option a larger separate power supply and added space for 72 hours battery back-up.The ID60 series supports NOTIFIERs unique Very Intelligent Early Warning VIEW technology. Combined with the patented AWACS Advance Warning Addressable Combustion Sensing and DIG Dynamic Intelligent Grouping algorithms the ID60 series provides the most cost-effective stable and reliable early warning systems without the need to use costly aspirating detection systems.The ID61 is housed in a slightly larger enclosure 500mm x 400mm x 110mm than the ID60 to accommodate for an internal mounted printer. A larger separate power supply 3A is fitted in the ID61 to cater for the more power hungry applications.Key FeaturesLPCB approved to EN54 Parts 2 and 4One loop capacity 99 sensors and 99 modules16 fire zones 16 non fire zonesSupports advanced detection such as VIEW HARSH OptiPlex HAZARD64 CBE rules10 Pre-alarm levels per sensor9 Alarm levels per sensorDrift compensationMaintenance alertAutomatic High TestDay Night mode facilityTime programsClass ChangeAutolearn facilityOne man walk test2 x 40 character backlit LCDActive and passive repeatersProgrammable from the panel keypad or PCSupports loop powered sounders relaysTwo on board sounder circuitsTwo on board configurable outputs

GBP 1808.16

1

Notifier ID62 Single Loop Intelligent Fire Alarm Panel 002-461

Notifier ID62 Single Loop Intelligent Fire Alarm Panel 002-461The NOTIFIER ID60 Series Single Loop intelligent fire alarm panel has been developed for both installers and end users with efficiency in mind offering a technically advanced range of facilities and functions while remaining easy to install program and operate. Three models are available in the ID60 series. The compact ID60 the ID61 with internal printer option and a larger separate power supply and the ID62 with internal printer option a larger separate power supply and added space for 72 hours battery back-up.The ID60 series supports NOTIFIERs unique Very Intelligent Early Warning VIEW technology. Combined with the patented AWACS Advance Warning Addressable Combustion Sensing and DIG Dynamic Intelligent Grouping algorithms the ID60 series provides the most cost-effective stable and reliable early warning systems without the need to use costly aspirating detection systems.The ID62 is housed in a large enclosure 500mm x 620mm x 208mm to accommodate for an internal mounted printer and space for up to 42AH batteries for 72 hours battery backup. A larger separate power supply 3A is fitted in the ID62 to cater for the more power hungry applications and to provide enough power to support72 hours of battery 42AH backup should the mains AC power fail. Two front covers are provided on the ID62. One is fitted at the top part of the enclosure and one is fitted at the bottom part of the enclosure thereby allowing for easy installation and maintenance of the panel printer and batteries.Key FeaturesLPCB approved to EN54 Parts 2 and 4One loop capacity 99 sensors and 99 modules16 fire zones 16 non fire zonesSupports advanced detection such as VIEW HARSH OptiPlex HAZARD64 CBE rules10 Pre-alarm levels per sensor9 Alarm levels per sensorDrift compensationMaintenance alertAutomatic High TestDay Night mode facilityTime programsClass ChangeAutolearn facilityOne man walk test2 x 40 character backlit LCDActive and passive repeatersProgrammable from the panel keypad or PCSupports loop powered sounders relaysTwo on board sounder circuitsTwo on board configurable outputs

GBP 1872.25

1

Notifier PRL-LED-EN Pearl Fixed 2 Loop Intelligent Fire Alarm Control Panel with 64 LEDs

Notifier PRL-LED-EN Pearl Fixed 2 Loop Intelligent Fire Alarm Control Panel with 64 LEDsThe Pearl fire alarm control panel from Notifier by Honeywell is a robust and easy to use networkable 1 or 2 loop panel. It exploits Notifiers class leading Opal digital protocol to maximise the speed and efficiency of fire detection and alarm. The large display with its intuitive interface and menu driven features allows quick and easy operation of the system.Coupled with more power and devices on the loop than other panels in its class the simple design will allow for trouble-free first fix installation. Compatible with the ID2net network used by the ID3000 the Pearl panel is supported by an integrated tools suite to enhance and simplify the system management.Extended capacityThe Pearl supports up to 636 loop devices 159 detectors plus 159 modules per loopLonger loops but fewer of them will give the opportunity to save on installation time cost and wiringHighly resilient Opal system able to pinpoint a loop fault whilst maintaining full system operationPowerful networking capability - Up to 16 Pearl panels controlling over 10000 devices can be networked via the superfast ID2net prioritising a fire signal to communicate across a network in under three secondsEase of useIntuitive on-site management - backlit buttons for fast error free situation management and large display giving complete information at a glanceSimpler diagnostics and maintenance - panel control of detector LEDs enabling confirmation of detector statusText programming via MS Excel spread sheetUser permissions set per individual passwordFlexibilityUnique first fix bracket with adaptations for 19 rack or flush mounting.Fast system set up and commissioning via the panel loop Autolearn and advanced PC tools suiteComprehensive Cause Effect programming capabilityPanel sounder and beacon synchronisationSystem extensions and adaptations can be made quickly without compromising fire cover and without extensive re-cablingSeparate text change without risk to Cause Effect or system configuration.Ability to run BS5839 part 6 system for HMO

GBP 2044.22

1

Notifier PRL-LED-EN-1 Pearl Fixed 1 Loop Intelligent Fire Alarm Control Panel with 64 LEDs

Notifier PRL-LED-EN-1 Pearl Fixed 1 Loop Intelligent Fire Alarm Control Panel with 64 LEDsThe Pearl fire alarm control panel from Notifier by Honeywell is a robust and easy to use networkable 1 or 2 loop panel. It exploits Notifiers class leading Opal digital protocol to maximise the speed and efficiency of fire detection and alarm. The large display with its intuitive interface and menu driven features allows quick and easy operation of the system.Coupled with more power and devices on the loop than other panels in its class the simple design will allow for trouble-free first fix installation. Compatible with the ID2net network used by the ID3000 the Pearl panel is supported by an integrated tools suite to enhance and simplify the system management.Extended capacityThe Pearl supports up to 636 loop devices 159 detectors plus 159 modules per loopLonger loops but fewer of them will give the opportunity to save on installation time cost and wiringHighly resilient Opal system able to pinpoint a loop fault whilst maintaining full system operationPowerful networking capability - Up to 16 Pearl panels controlling over 10000 devices can be networked via the superfast ID2net prioritising a fire signal to communicate across a network in under three secondsEase of useIntuitive on-site management - backlit buttons for fast error free situation management and large display giving complete information at a glanceSimpler diagnostics and maintenance - panel control of detector LEDs enabling confirmation of detector statusText programming via MS Excel spread sheetUser permissions set per individual passwordFlexibilityUnique first fix bracket with adaptations for 19 rack or flush mounting.Fast system set up and commissioning via the panel loop Autolearn and advanced PC tools suiteComprehensive Cause Effect programming capabilityPanel sounder and beacon synchronisationSystem extensions and adaptations can be made quickly without compromising fire cover and without extensive re-cablingSeparate text change without risk to Cause Effect or system configuration.Ability to run BS5839 part 6 system for HMO

GBP 1619.16

1

Notifier DSS-PC-I02 Loop-Powered EN54-23 Open Category Detector Base Sounder Strobe - Red Flash cw Isolator

Notifier DSS-PC-I02 Loop-Powered EN54-23 Open Category Detector Base Sounder Strobe - Red Flash cw IsolatorFeaturing fast and simple installation and control the Opal base sounderVisual Alarm Device VAD forms the perfect base for Notifier Opal detectors. Powered by the fire panel via the loop wiring control of the devices is enabled using on-board switches or via the Opal digital protocol using the control panel. The range is installed simply by a twist fit onto the B501AP base.Key FeaturesEN54-23Clear Lens with Red FlashWhite Body

GBP 75.25

1

Notifier NFXI-MM10 Ten-way Input Module with Loop Isolation

Notifier NFXI-MM10 Ten-way Input Module with Loop IsolationThe NFXI-MM10 provides an interface with normally open contact devices. The supervised state normal open circuit fault or short circuit alarm is sent back to the control panel. In Opal Digital Protocol only one address is used for the entire multimodule with sub-addresses completing the remaining addresses.For compatibility with existing installations using Notifier CLIP Protocol the first address is set from 01 to 90 the other modules are automatically assigned the next nine addresses up to six unused addresses can be disabled by dip switch.

GBP 655.45

1

Notifier ID3002 2 Loop Intelligent Fire Alarm Control Panel

Notifier ID3002 2 Loop Intelligent Fire Alarm Control PanelThe Notifier ID3000 family of fire alarm control panels deliver the power and flexibility to meet the even the most demanding of requirements. From 2 to 8 loops in a single ID3000 panel to over 500 loops on a network an ID3000 system offers unrivalled stability versatility and capacity. When it comes to giving you the earliest possible warning of a potential fire threat the ID3000 supports Notifiers comprehensive range of detectors advanced fire detection sensors and loop devices delivering you the most complete and versatile fire alarm system in the market place.The ID3000 can be programmed to adapt to the different uses of the areas where smoke detectors are installed. A total of 9 different sensitivity levels can be assigned to individual smoke sensors thereby allowing the system designer to closely match the sensors response to the environment in which the device is located. This even allows smoke detection to be turned off leaving heat detection active.Key Features2-8 Analogue Addressable Loops each of up to 198 devices255 Fire zones per panelFully approved peer to peer network of up to 63 panels maintains 3 second call point response time over the networkFlexible timer functions system sensitivity and functionality can be tailored for the time of day or day of weekSophisticated cause and effect programming including support for non-fire signals and over-ride capability for smoke control systems.Convenience features for commissioning and maintenance engineers such as auto-learn of loops walk test and double address detection.CPD approved by LPCB BRE VdS

GBP 2933.30

1

Notifier BSO-PP-I02 Addressable Loop-Powered Base Sounder - White cw Isolator

Notifier BSO-PP-I02 Addressable Loop-Powered Base Sounder - White cw IsolatorFeaturing fast and simple installation and control the Opal base sounder forms the perfect base for Notifier Opal detectors. Powered by the fire panel via the loop wiring control of the device is enabled using on-board switches or via the Opal digital protocol using the control panel. The range is installed simply by a twist fit onto the B501AP base.Key FeaturesFaster installation - The large cable access rear or surface cable entry options and innovative loop continuity spring all make for faster more cost effective installation.Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an anti-tamper feature giving added security.Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident.Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer.Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounderbeacon can be added without re-wiring.Reduced inventory count - Notifiers Opal AV range now utilizes the B501AP system base- common to detectors. The Opal AV range is designed to maximise the features of Notifiers advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder sounder beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.EN54-3 approved.

GBP 50.39

1

Notifier BSO-BB-I02 Addressable Loop-Powered Base Sounder - Black cw Isolator

Notifier BSO-BB-I02 Addressable Loop-Powered Base Sounder - Black cw IsolatorFeaturing fast and simple installation and control the Opal base sounder forms the perfect base for Notifier Opal detectors. Powered by the fire panel via the loop wiring control of the device is enabled using on-board switches or via the Opal digital protocol using the control panel. The range is installed simply by a twist fit onto the B501AP base.Key FeaturesFaster installation - The large cable access rear or surface cable entry options and innovative loop continuity spring all make for faster more cost effective installation.Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an anti-tamper feature giving added security.Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident.Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer.Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounderbeacon can be added without re-wiring.Reduced inventory count - Notifiers Opal AV range now utilizes the B501AP system base- common to detectors. The Opal AV range is designed to maximise the features of Notifiers advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder sounder beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.EN54-3 approved.

GBP 86.69

1

Notifier Loop-Powered Agile Gateway NRXI-GATE

Notifier Loop-Powered Agile Gateway NRXI-GATELoop-powered Gateway device for Notifier Agile wireless system.About AgileThe Agile Wireless Fire Detection and Alarm System is a platform of wireless fire devices suitable for all applications where wired fire devices cannot be installed for economic or aesthetic reasons. The look and feel of our wired fire devices combined with cutting edge wireless mesh network technology delivers superior performance when compared to traditional wireless star network technologies.Agile FeaturesMesh multiple communication paths for increased reliability18RF channels at 868MHz - provides greater tolerance to interference2 integrated antennas on each wireless fire device easier positioning of devicesUp to 400 m free air communication range providing good coverage levelsAverage 5 year battery service life reducing maintenance requirementsAddresses set using rotary switches reduced commissioning timeTamper-resist locking mechanism to prevent unauthorised removal of sensor headWired fire devices look and feel easier installation and visual integrationPatented battery service life prediction feature more proactive maintenancePeace of mind - battery redundancy delivering always on performanceLoop powered Gateway reduced installation cost and timeUp to 8 Gateways per loopUp to 32 Wireless devices per GatewayAgile IQ 3-in-1 software for easy design configuration and diagnosticsHighly adaptive and flexible features that effectively meet the needs of diverse applications from mainstream to more challenging sites.

GBP 340.70

1

Notifier NFXI-BEAM Loop Powered Beam Detector

Notifier NFXI-BEAM Loop Powered Beam DetectorThe Opal addressable beam detector is an intelligent reflector type linear optical beam smoke detector designed to operate with Notifier addressable fire alarm systems. It operates primarily on the principle of light obscuration utilising infra-red light. The Infra-Red transmitter generates a beam of light towards a high efficiency reflect. The reflector returns the beam to the receiver where an analysis of the received signal is made. The change in the strength of the received signal is used to determine the alarm condition.Key Features5 100m operating range designed for the protection of buildings such as shopping centres heritage buildings warehouses and other structures with large open spacesEasy set-up and calibration with visual aids for both coarse and fine adjustmentLoop powered with built in isolation for system mappingUtilizes the advanced Opal digital protocol whilst remaining backward compatible with existing Notifier systemThe NFXI-BEAM-T Beam Detector features a unique remote test capability that fully tests both the optics and the electronics of the device. This means theres no need to hire a platform to give high level access to the device in testing.Two automatically variable sensitivity modes compensate for short term environmental changesAutomatic drift compensation compensates for long term sensitivity changes caused by environmental factorsFour fixed sensitivity level

GBP 878.53

1

Notifier BSO-DD-I02 Addressable Loop-Powered Base Sounder - Ivory cw Isolator

Notifier BSO-DD-I02 Addressable Loop-Powered Base Sounder - Ivory cw IsolatorFeaturing fast and simple installation and control the Opal base sounder forms the perfect base for Notifier Opal detectors. Powered by the fire panel via the loop wiring control of the device is enabled using on-board switches or via the Opal digital protocol using the control panel. The range is installed simply by a twist fit onto the B501AP base.Key FeaturesFaster installation - The large cable access rear or surface cable entry options and innovative loop continuity spring all make for faster more cost effective installation.Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an antitamper feature giving added security.Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident.Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer.Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounderbeacon can be added without re-wiring.Reduced inventory count - Notifiers Opal AV range now utilizes the B501AP system base- common to detectors. The Opal AV range is designed to maximise the features of Notifiers advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder sounder beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.EN54-3 approvedComes with isolatorPlease note The image is for illustrative purposes only. TheBSO-DD-I02 comes in the colour ivory.

GBP 77.28

1

Notifier ID3000 4 Loop Addressable Control Panel with 4.5A Power Supply 020-727

Notifier ID3000 4 Loop Addressable Control Panel with 4.5A Power Supply 020-727The Notifier ID3000 family of fire alarm control panels deliver the power and flexibility to meet the even the most demanding of requirements. From 2 to 8 loops in a single ID3000 panel to over 500 loops on a network an ID3000 system offers unrivalled stability versatility and capacity. When it comes to giving you the earliest possible warning of a potential fire threat the ID3000 supports Notifiers comprehensive range of detectors advanced fire detection sensors and loop devices delivering you the most complete and versatile fire alarm system in the market place.The ID3000 can be programmed to adapt to the different uses of the areas where smoke detectors are installed. A total of 9 different sensitivity levels can be assigned to individual smoke sensors thereby allowing the system designer to closely match the sensors response to the environment in which the device is located. This even allows smoke detection to be turned off leaving heat detection active.Key Features2-8 Analogue Addressable Loops each of up to 198 devices255 Fire zones per panelFully approved peer to peer network of up to 63 panels maintains 3 second call point response time over the networkFlexible timer functions system sensitivity and functionality can be tailored for the time of day or day of weekSophisticated cause and effect programming including support for non-fire signals and over-ride capability for smoke control systems.Convenience features for commissioning and maintenance engineers such as auto-learn of loops walk test and double address detection.CPD approved by LPCB BRE VdSKit Includes1 x 020-538 - Basic Equipment kit 2-8 Loops1 x 020-579 - 7A PSU 4.5A or 7A User selectable1 x 020-543- Dual transmittion path board kit1 x 020-588 - Dual loop board kit1 x 020-474-009 - Extended deep back-box kit Space for up to 38Ah batteries. H620mm W500mm D220mm.1 x 020-480-009 - Main cover kit1 x 020-485-009 - Extension cover blanking kit1 x 020-481-009 - Extension cover kit

GBP 4722.00

1

DIGITAL MARKETING

Brand

Merchant

Price (EUR)