mcb.dk | Få success online

Notifier Honeywell 583507 Installation Kit For Redundant DCS and DKM

Notifier Honeywell 583507 Installation Kit For Redundant DCS and DKMInstallation kit for DCS15RE DCS2RE or DKM18.This installation kit is needed to install a paging microphone in a table surface or the 19 panel Part No. 583709.

GBP 330.97

1

Notifier 020-599-009 Semi-Flush Mounting Bezel for ID50 and ID60

Notifier 020-599-009 Semi-Flush Mounting Bezel for ID50 and ID60Semi-flush mounting bezel designed for the Notifier ID50 ID60 range of addressable fire alarm control panels.Key FeaturesH437mm W453mm

GBP 150.89

1

Notifier PRL-COM Pearl RS232 and 485 Card

Notifier PRL-COM Pearl RS232 and 485 CardThe PRL-COM is a RS232 485 card for the Pearl range of Notifier fire alarm control panels.

GBP 365.86

1

Notifier S300PTU Programming Test Unit for PhD Detectors

Notifier S300PTU Programming Test Unit for PhD DetectorsThe S300PTU is a hand-held Programming Test Unit for use with the PhD range of conventional detectors.Communication is achieved via an LED and opto-diode built in to the S300PTU for close range communication. This allows direct communication via the detector LED indicator.Key FeaturesLED and opto-diode built inDesigned for use with the PhD range of conventional detectors

GBP 361.80

1

Notifier Extension Back Box for Pearl PRL-EXT-BOX-17

Notifier Extension Back Box for Pearl PRL-EXT-BOX-17Extension back box for existing surface mounted Pearl installations including cover panel dress plates and space for 17Ah batteries. Only one can be used with each panel and is not suitable for flush mounting.Key FeaturesH222mm W436mm D110mm

GBP 598.67

1

Notifier Honeywell PoE Injector for ETCS 583534

Notifier Honeywell PoE Injector for ETCS 583534Power supply via the Ethernet cable when no appropriate IP switch is present. Also suitable for power supply to the 583531 in cases of an unpowered ISDN cable 230 V AC 16 W incl. network cable with plug and RJ45 patch cable.

GBP 263.64

1

Notifier M721E Analogue Addressable Dual Input Monitor and Single Output Relay Module

Notifier M721E Analogue Addressable Dual Input Monitor and Single Output Relay ModuleThe M721E is designed for use with any Notifier protocol fire alarm control panel.Comes complete with end of line resistors plug-in screw connections direct decade address entry and tri-colour LEDs complete with Isolator.The newly designed platform of M700 family of InputOutput modules completes the NFXI line of wired spot detectors with unaltered family feeling and undisputed continuity.The new M700 look and feel combine maximum reliability with top-end functionality all enriched by a cutting-edge modern design.Single and multi-way models are available within the renewed mechanical package reducing both the cost of installation and the mounting space required.Their unique mechanical design allows each module to be mounted in either a common wall box on a DIN rail or its dedicated enclosure. The DIN rail mounting option is possible thanks to smart DIN brackets directly built-in the enclosure. Irrespective of the mounting methods chosen the address switch is always visible and accessible for selection.Each module has built-in short circuit protection for the communications loop however to increase application flexibility the isolators can be selecteddeselected on an individual module basis.To help technicians in the maintenance and fault-finding process light pipes have been enlarged to increase visibility even in the most challenging space constrained application. Both the status LED and the rotary switch selection can be viewed on the two sides without having to remove the cover of the surface mounting box.The multi-colour status LED provide diagnostic information regarding the status of each individual inputoutput. For ease of installation testing and maintenance modules have been equipped with quick connectors. The renovated aesthetics offers data finely engraved on the enclosures surface by laser for lifetime durability and resistance to degradation.

GBP 150.07

1

Notifier Extension Back Box for New Pearl Installations PRL-BOX-17

Notifier Extension Back Box for New Pearl Installations PRL-BOX-17Extension back box for new Pearl installations Surface or Flush mounting includes cover and space for 17Ah batteries. For flush mounting use PRL-BEZEL-17.Key FeaturesH592mm W447mm D110mm.

GBP 493.21

1

Notifier Replacement PCB Kit for ID61 ID62 020-650-004

Notifier Replacement PCB Kit for ID61 ID62 020-650-004ID61 ID62 replacement PCB Kit including LCD and membrane. 5 control buttons.

GBP 1273.58

1

Notifier 011145F UNP Bi-Directional Paging Relay for Analog System Connectivity

Notifier 011145F UNP Bi-Directional Paging Relay for Analog System ConnectivityThe 011145F UNP Paging Relay from Syn-Apps is a small PoE network appliance providing many features including unicast-to-multicast conversion that can eliminate bandwidth-intensive unicast streams across WAN connections. The Paging Relay enables fire alarm control panels analog PA systems analog security systems physical contacts and more to integrate seamlessly with the Honeywell UNP Unified Notification Platform.Paging Relay OperationThis patented product allows UNP notifications sent in multicast format to be converted to unicast for multi-site WAN-connected voice networks. The Paging Relay converts incoming streams back to multi-cast at the destination site used for delivery to the following appropriate end-pointsIP phonesIP speakersTraditional PA Systems-via analog audio via RCA or 600 ohm interfacesThe 011145F Paging Relay is small enough to hold in one hand and features plug-n-play technology making installation as simple as connecting an Ethernet cable to a device.Key FeaturesEasily integrates the fire alarm control panels with Honeywell UNP to activate notificationsUnicast-to-multicast conversionAuto registration to Honeywell UNP via DHCPUp to 8MB on-board storage used for audio files or stored announcements600 ohm and RCA line-out ports for overhead paging and analog systemsProvides RCA analog audio input used for Background Music and Music On-Hold MOHContains a SIP interface that allows SRSTCME fail-over support for the enhanced redundancySends trigger notifications when activated via the Sense-In portContains a Web-based interface for customization and software upgradesRelay and Sensor Contact Closure functionality Automatically plays audio files control door and window entries activates sirensstrobes and moreAccepts commands from 3rd party systems to activate locally stored audio to play reducing bandwidth consumption in WAN deploymentsGain control for integration with external audio input devices V4 unitsStream analog audio to IP Multicast for background music when integrated with the Honeywell UNPAutomatic GatingZone PagingSupports up to 10 simultaneous broadcastsLocal authentication servicesNight Ringer FunctionalityDirect Cisco ICM integration

GBP 2547.98

1

Notifier Spare Door for Pearl Panel Complete with Display SPR-PRL-DOOR-LED

Notifier Spare Door for Pearl Panel Complete with Display SPR-PRL-DOOR-LEDSpare door for Pearl panel complete with display switches 64 zonal LEDs and hinges.

GBP 872.86

1

Notifier 6U x 19quot Rack Mounting Assembly for Standard Extension Chassis 020-591

Notifier 6U x 19 Rack Mounting Assembly for Standard Extension Chassis 020-5916U x 19 Rack Mounting Assembly for standard Extension Chassis Printer. BlackGrey adapter plate and cover.

GBP 202.80

1

Notifier 020-548 Optional Status Indication Board Kit for 7A PSU

Notifier 020-548 Optional Status Indication Board Kit for 7A PSUThis optional unit includes complete assembly and interconnection cables. Mounts on the side of the externally mounted Power Supply Unit Kit and gives status indication of the PSU.

GBP 202.80

1

Notifier HOP-405-100 Serial COM Module - For RS232 must order TPP LICENCE

Notifier HOP-405-100 Serial COM Module - For RS232 must order TPP LICENCEAn optional Serial COM Module. For RS232 you must order a TPP LICENCE.Key FeaturesProvides an RS485 port and a configurable RS232 RS485 portAuxiliary 24V dc supply. Current configurable to 0.5A 1A 1.5A and 2AFor communication with external equipment such as Notifier repeat mimic panel Pager and Serial Printer

GBP 334.21

1

Notifier 020-553 RS485 Communication Card Kit for ID50 amp ID60

Notifier 020-553 RS485 Communication Card Kit for ID50 ID60The Notifier RS485 Communication Card kit is used for networking Notifier ID50 ID60 panels to a repeater panel. The RS485 card is installed in the main control panel and is connected via a cable to repeater panel.

GBP 171.97

1

Notifier Semi-Flush Mounting Bezel for ID61 ID2000 ID3000 Standard Back Box 020-038-009

Notifier Semi-Flush Mounting Bezel for ID61 ID2000 ID3000 Standard Back Box 020-038-009NOTIFIERs ID series intelligent fire alarm panels are available in the blackgrey colour as standard. A light grey cover and bezel option with a high-quality velvety finish and a stainless-steel cover and bezel option with clean bright looks are also available for more architecturally challenging sites.Semi flush mounting bezel for ID61 ID2000 and ID3000 control panels with standard back box.Key FeaturesBlackGreyH467mm W567mm

GBP 211.73

1

Notifier PEARL IO Card for EN54-13 Compliant Sounder Circuits PRL-VDS

Notifier PEARL IO Card for EN54-13 Compliant Sounder Circuits PRL-VDSThe Notifier PRL-VDS is an input output card kit for use with the Notifier Pearl range of analogue addressable fire alarm control panels.This card is used for EN54-13 compliant sounder circuits fire routing interface fault routing interface and fire protection interface.

GBP 1024.55

1

Notifier Display Plate with 2x 40LCD Assembly Kit for ID2000 ID2002 020-491-009

Notifier Display Plate with 2x 40LCD Assembly Kit for ID2000 ID2002 020-491-009Spare replacement display plate with 2x40 LCD assembly kit designed for the ID2000 and ID2002 control panels only.

GBP 1171.37

1

Notifier Honeywell PSU 24V-2 Emergency Power Supply Unit for VAPA System 581722

Notifier Honeywell PSU 24V-2 Emergency Power Supply Unit for VAPA System 581722Emergency manager for use as emergency power supply of a Voice Alarm application.Key FeaturesEmergency power supply in the 1 HU enclosureOutputs for control devices such as DOM or Comprio net8 individually fused high power outputs for output amplifiers each with 30A max.Authorisation pursuant to EN 54-4A2LED displays and display for status reportsPotential-free contacts for the transmission of alarm messagesBattery capacity up to a total of 320 AhMaximum output 186A

GBP 2767.01

1

Notifier IDR-6A Active Repeater Panel For ID3000 System Only

Notifier IDR-6A Active Repeater Panel For ID3000 System OnlyThe IDR-6A active repeater panel combines a compact design with a 240 x 64 pixel graphic backlit LCD and system control pushbuttons. The large LCD replicates the display on the ID3000 panel and utilises the same simple menu-driven user interface as the ID3000 panel. The control buttons and navigation keys on the repeater provide the operator with the ability to navigate through menu options and event displays. Furthermore it allows the user to remotely reset the system accept events silence sounders re-sound sounders and initiate evacuation and to run diagnostics tests on the repeater.For added security a key switch on the front of the repeater enablesdisables certain pushbuttons. The nine LED indicators provide a quick summary of the general system status for the user. The compact design makes it very easy to install and commission the IDR Series repeaters. The repeaters event log can store up to 150 most recent events this also aids commissioning.Key Features Quickly identify the location of a fire related incidentDesigned to comply with EN54 Part 2Simple connection to ID panelsActive Passive optionsPower diagnosticsPush button testLanguage optionsWindows based off-line configuration tool

GBP 1014.00

1

Notifier Honeywell 583392.11 Fibre Optic Module For FO Switch Multimode

Notifier Honeywell 583392.11 Fibre Optic Module For FO Switch Multimode Pluggable fibre optic module for the fibre optic switch 583394.11 in 1310 nm multimode. This provides a fibre optic cable length up to 2km.DetailsRoHS compliantCompliant with Fast Ethernet standardCompatible with SONETSDH applicationIndustry standard small form pluggable SFP packageDuplex LV connectorDifferential LVPECL inputs and outputsSingle power supply 3.3VTTL signal detect indicatorHot PluggableClass 1 laser product complies with EN 60825-1

GBP 141.96

1

Notifier 020-648 3A PSU for ID61 ID62 NGU IDP-LPB1 ID2000 amp ID3000

Notifier 020-648 3A PSU for ID61 ID62 NGU IDP-LPB1 ID2000 ID3000Power supply for the ID3000 system including interconnect cables and fuses. It is mounted in the basic 020-538-001.Key FeaturesWeight 1.3kgCurrent available for batteries up to 2.2ACurrent available alarm 3A Recommended to 4 loops.

GBP 567.02

1

Notifier Honeywell Hand-Held Emergency Microphone for Comprio Systems 583308

Notifier Honeywell Hand-Held Emergency Microphone for Comprio Systems 583308Hand-held microphone with announcement key in order to talk directly into the Comprio control unit. The microphone is inserted into the socket directly on the front of the Comprio and can also be mounted there.

GBP 274.99

1

Notifier Honeywell 100V Interface Module for Fohhn Line Array Speakers White 582604.W

Notifier Honeywell 100V Interface Module for Fohhn Line Array Speakers White 582604.WThe Interface module is equipped with a 100 V transformer adapted for 2.5 W used with the electronically steerable line source speakers it forms the first electronically steerable line source speaker in the world with Loop Technology. The solution is 100 compliant to EN 60849 and EN 50849 and the module itself EN 54-17 certified.Key FeaturesIntegrated inconspicuous designSimple quick mountingSimple monitored signal transmissionIntegrated VARIODYN D1 loop isolator moduleCE- and RoHS-compliant

GBP 573.52

1

Notifier Honeywell 100V Interface Module for Fohhn Line Array Speakers Black 582604.B

Notifier Honeywell 100V Interface Module for Fohhn Line Array Speakers Black 582604.BThe Interface module is equipped with a 100 V transformer adapted for 2.5 W used with the electronically steerable line source speakers it forms the first electronically steerable line source speaker in the world with Loop Technology. The solution is 100 compliant to EN 60849 and EN 50849 and the module itself EN 54-17 certified.Key FeaturesIntegrated inconspicuous designSimple quick mountingSimple monitored signal transmissionIntegrated VARIODYN D1 loop isolator moduleCE- and RoHS-compliant