13 results (0,13967 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Solo 110 Urban Telescopic Pole 1.75 Metres

Solo 110 Urban Telescopic Pole 1.75 Metres

Solo 110 Urban Telescopic Pole 1.75 MetresThe Solo 110 Access Pole offers safe access to detectors installed at heights of up to 3 metres. Solo poles should always be held vertically when raising or lowering. Ensure that all extension poles and test tool buttons are locked into position before extension and use. The maximum working height using Solo 110 Solo 111 poles is 4.5 metres for Solo and Testifire. This is achieved using 1 x Solo 110 telescopic pole and a maximum of 3 x Solo 111 extension poles. It is recommended to stand directly under the detector.Key FeaturesExtends to 1.75 metres to provide maximum reach of 3 metresCan be used with up to 3 Solo 111 extension polesPull-wound glass fibre constructionDesigned certified non-conductiveSimple locking mechanismCompatible with the Solo 612 Pole BagUrban telescopic and extension poles are half the length of conventional poles

GBP 610.40
1

Testifire XTR2 TES3-3PACK-001 Smoke Cartridge - Pack Of 3

Testifire XTR2 TES3-3PACK-001 Smoke Cartridge - Pack Of 3

Testifire XTR2 TES3-3PACK-001 Smoke Cartridge - Pack Of 3Non-hazardous non-pressurised smoke cartridges designed specifically for use with Testifire XTR2.Testifire XTR2 is the next generation of our popular Testifire product however it is much more than just a functional test tool. Testifire XTR2 has compliance at its core its unique features enable compliant testing to be carried out and via an App and supporting cloud-portal ensure test results can be recorded automatically at the time of test giving fire service managers and building owners the ultimate proof of test.Please note This capsule is not suitable for use with the Testifire 1001 2001.

GBP 196.15
1

Solo 111 Urban Extension Pole 0.5 Metres

Solo 111 Urban Extension Pole 0.5 Metres

Solo 111 Urban Extension Pole 0.5 MetresThe Solo 111 Extension Pole is to be used to extend the height of the Solo 110 telescopic access pole. The maximum working height using Solo 110 Solo 111 poles is 4.5 metres for Solo and Testifire. This is achieved using 1 x Solo 110 telescopic pole and a maximum of 3 x Solo 111 extension poles. It is recommended to stand directly under the detector. No more than 3 x Solo 111 extension poles should be used at the same time.Key Features0.5 metre pole for extending reach of Solo 110Pull-wound glass fibre constructionDesigned certified non-conductiveSimple locking mechanismCompatible with the Solo 612 Pole BagUrban telescopic and extension poles are half the length of conventional poles

GBP 173.46
1

Solo 613 Urban Lightweight Backpack amp Poles Kit

Solo 613 Urban Lightweight Backpack amp Poles Kit

Solo 613 Urban Lightweight Backpack Poles KitA lightweight practical kit that provides the perfect balance of carrying test equipment for testing up to 4.5 meters alongside your other on-site essentials. A flexible backpack ideal for use on large sites or city working. Includes space for your essential test kit devices small tools accessories. Designed for allowing engineers to move easily around towns large sites or buildings without the need to carry bulk poles and bags.The kit includes a pole bag which comes complete with 1 x 110 1.75m telescopic 3 x 111 0.5m extension poles. The poles are designed to work in conjunction with each other and are used to test detectors up to a maximum working height of 4.5 metres. The pole bag is fastened onto the backpack using adjustable clips.Key FeaturesCustomisable main interior for test equipment battery batons accessoriesPadded compartment for Laptop or tabletLarge zipped pockets for cartridges smaller essentialsFront pocket for A4 notepad small tool sets etc.Clear pocket to promote your own brand or businessAdjustable quick-release clips for Solo 612 Pole bagWide shoulder straps and padded backChest strap for weight balanceLightweight design allows fast and efficient testingPoles are design from a pull-wound glass fibre constructionSimple locking mechanism on the polesUrban telescopic and extension poles are half the length of conventional polesCabin luggage compatible - Based on backpack dimensions. Please check with your individual airline as baggage allowances vary. Poles length 620mm may be allowed when held diagonallyKit Contains1 x Solo 611 Urban Lightweight Backpack1 x Solo 612 Urban Pole Bag1 x Solo 110 Urban 4-section Telescopic Pole 1.75m3 x Solo 111 Urban Extension Poles 0.5m

GBP 1398.04
1

Scorpion 2001 Aspiration Smoke Detection ASD Unit with Fixings SCORP2001

Scorpion 2001 Aspiration Smoke Detection ASD Unit with Fixings SCORP2001

Scorpion 2001 Aspiration Smoke Detection ASD Unit SCORP2001Scorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required.Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activationFeaturesSmoke generation tailored for functional testing of point type smoke detectors Adjustable smoke time to suit characteristics of system under test clearing function enables quicker reset and reduced repeat alarmsTesting capacityIn excess of 240 tests of 15 seconds per Scorpion Head Unit Suitable detector types Optical photoelectric Ionization Appropriate Stimulus Benign particulate avoids material contamination Consistent repeatable stimulus from one test to the next Approved by world-leading detector manufacturersComplianceThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situations True functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesPedigree ApprovalsScorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.

GBP 492.97
1

Scorpion 25 Access Point SCORP25

Scorpion 25 Access Point SCORP25

Scorpion 25 Access Point SCORP25Scorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required. Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activationFeaturesSmoke generation tailored for functional testing of point type smoke detectors Adjustable smoke time to suit characteristics of system under test clearing function enables quicker reset and reduced repeat alarmsTesting capacityIn excess of 240 tests of 15 seconds per Scorpion Head Unit Suitable detector types Optical photoelectric Ionization Appropriate Stimulus Benign particulate avoids material contamination Consistent repeatable stimulus from one test to the next Approved by world-leading detector manufacturersComplianceThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situations True functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesPedigree Approvals Scorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.

GBP 136.62
1

Scorpion 1001 Point Head Unit with Fixings SCORP1001

Scorpion 1001 Point Head Unit with Fixings SCORP1001

Scorpion 1001 Point Head Unit SCORP1001Scorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required. Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activationFeaturesSmoke generation tailored for functional testing of point type smoke detectors Adjustable smoke time to suit characteristics of system under test clearing function enables quicker reset and reduced repeat alarmsTesting capacityIn excess of 240 tests of 15 seconds per Scorpion Head Unit Suitable detector types Optical photoelectric Ionization Appropriate Stimulus Benign particulate avoids material contamination Consistent repeatable stimulus from one test to the next Approved by world-leading detector manufacturersComplianceThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situations True functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesPedigree ApprovalsScorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.

GBP 492.97
1

Scorpion 8000 Control Panel SCORP8000

Scorpion 8000 Control Panel SCORP8000

Scorpion 8000 Control Panel SCORP8000Scorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required. Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activationFeaturesSmoke generation tailored for functional testing of point type smoke detectors Adjustable smoke time to suit characteristics of system under test clearing function enables quicker reset and reduced repeat alarmsTesting capacityIn excess of 240 tests of 15 seconds per Scorpion Head Unit Suitable detector types Optical photoelectric Ionization Appropriate Stimulus Benign particulate avoids material contamination Consistent repeatable stimulus from one test to the next Approved by world-leading detector manufacturersComplianceThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situations True functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesPedigree ApprovalsScorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.

GBP 914.99
1

Scorpion 7000 Portable Controller SCORP7000

Scorpion 7000 Portable Controller SCORP7000

Scorpion 7000 Portable Controller SCORP7000Scorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required. Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activationFeaturesSmoke generation tailored for functional testing of point type smoke detectors Adjustable smoke time to suit characteristics of system under test clearing function enables quicker reset and reduced repeat alarmsTesting capacityIn excess of 240 tests of 15 seconds per Scorpion Head Unit Suitable detector types Optical photoelectric Ionization Appropriate Stimulus Benign particulate avoids material contamination Consistent repeatable stimulus from one test to the next Approved by world-leading detector manufacturersComplianceThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situations True functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesPedigree ApprovalsScorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.

GBP 1260.83
1

Scorpion 1011 Point Smoke Detector Tester with Access Point SCORP1011-001

Scorpion 1011 Point Smoke Detector Tester with Access Point SCORP1011-001

Scorpion 1011 Point Smoke Detector Tester with Access Point SCORP1011-001What is ScorpionScorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required.Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point for use with the NEW Engineers Portable Controller which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activation.Key FeaturesSmoke generation tailored for functional testing of point type smoke detectorsAdjustable smoke time to suit characteristics of system under testClearing function enables quicker reset and reduced repeat alarmsIn excess of 240 tests of 15 seconds per Scorpion Head UnitSuitable detector types Optical photoelectric IonizationBenign particulate avoids material contaminationConsistent repeatable stimulus from one test to the nextApproved by world-leading detector manufacturersThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situationsTrue functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesScorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.Kit Includes1 x SCORP 10011 x SCORP 25

GBP 673.33
1