81 results (0,14258 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Mountz RCL46P Pneumatic Radial Multiplier (630 - 4535 N.m)

Mountz RCL46P Pneumatic Radial Multiplier (630 - 4535 N.m)

The RCL-80P radial gearing pneumatic torque multiplier is designed for precision tightening and loosening of all heavy duty bolting applications. These pneumatic multipliers are specially designed for heat plate exchanger applications. The torque multiplier shuts-off when the pre-set torque is achieved. Its non-impacting and operates at a smooth, continuous rotation. The torque tool provides quick and simultaneous tightening of large plate packs.Accuracy better than 5%. All Pneumatic Torque Multipliers should use a high quality air filter regulator. Torque setting is obtained by air pressure. Each Pneumatic Multiplier is supplied air-flow chart. Model:RCL-80P Range: 670 - 4840 N.m ,494 - 3569 lbf.ft, 68.3 - 493.7 kgf.m. Hex Drive:80mm Tool Weight:46.3 lbs. Tool Length:17.7 Tool Width:9.1 RPM High:6 RPM Low:2

GBP 6999.99
1

Mountz RCL80P Pneumatic Radial Multiplier (670 - 4840 N.m)

Mountz RCL80P Pneumatic Radial Multiplier (670 - 4840 N.m)

The RCL-80P radial gearing pneumatic torque multiplier is designed for precision tightening and loosening of all heavy duty bolting applications. These pneumatic multipliers are specially designed for heat plate exchanger applications. The torque multiplier shuts-off when the pre-set torque is achieved. Its non-impacting and operates at a smooth, continuous rotation. The torque tool provides quick and simultaneous tightening of large plate packs.Accuracy better than 5%. All Pneumatic Torque Multipliers should use a high quality air filter regulator. Torque setting is obtained by air pressure. Each Pneumatic Multiplier is supplied air-flow chart. Model:RCL-80P Range: 670 - 4840 N.m ,494 - 3569 lbf.ft, 68.3 - 493.7 kgf.m. Hex Drive:80mm Tool Weight:46.3 lbs. Tool Length:17.7 Tool Width:9.1 RPM High:6 RPM Low:2

GBP 14399.99
1

Mountz RCL36P Pneumatic Radial Multiplier (590 - 4235 N.m)

Mountz RCL36P Pneumatic Radial Multiplier (590 - 4235 N.m)

The RCL-80P radial gearing pneumatic torque multiplier is designed for precision tightening and loosening of all heavy duty bolting applications. These pneumatic multipliers are specially designed for heat plate exchanger applications. The torque multiplier shuts-off when the pre-set torque is achieved. Its non-impacting and operates at a smooth, continuous rotation. The torque tool provides quick and simultaneous tightening of large plate packs.Accuracy better than 5%. All Pneumatic Torque Multipliers should use a high quality air filter regulator. Torque setting is obtained by air pressure. Each Pneumatic Multiplier is supplied air-flow chart. Model:RCL-80P Range: 670 - 4840 N.m ,494 - 3569 lbf.ft, 68.3 - 493.7 kgf.m. Hex Drive:80mm Tool Weight:46.3 lbs. Tool Length:17.7 Tool Width:9.1 RPM High:6 RPM Low:2

GBP 6699.99
1

Mountz FLEXS-60R Auto Shut-off Right Angle Pulse Tool (3/8 Square Dr.) (15 - 24 N.m)

Mountz FLEXS-60R Auto Shut-off Right Angle Pulse Tool (3/8 Square Dr.) (15 - 24 N.m)

Flex assembly tools increase productivity and enhance product quality through precision torque control and user comfort. The FlexPower Pulse Tools provide operators with an industry leading power-to-weight ratio, allowing for a smaller tool selection for greater torques giving operators a lighter tool with more torque capability. Built for durability with a superior O-ring design and specially designed pulse fluid FlexPower extends life between regular oil changes and provides more torque stability. Designed to enhance cycle time with high-speed rundown. Note: Recommended air pressure is 85 PSI. Use a high quality air filter regulator and lubricator to ensure stable air pressure for optimal performance and for removal of moisture and other potential debris that can reduce the longevity and performance of pneumatic tools. Model:FLEXS-50R Drive Size:3/8" Sq. Dr. Range: 10.5 - 17 N.m, 7.7 - 12.8 lbf.ft, 1.1 - 1.7 kgf.m. Tool Weight:2.6 lbs. Tool Length:10 Free Speed RPM:4300 Noise DBA:80 Hose Size:1/4" P/W Ratio:14.2 Avg. Air Consumption - American:11.3 ft/min CFM Avg. Air Consumption - Metric:0.32 m/min CMM Pulse Tool Shut-Off Type:Auto Shut-Off

GBP 3999.99
1

Mountz FLEXS-70RX Auto Shut-off Right Angle Pulse Tool (1/4 F/Hex) (20 - 29 N.m)

Mountz FLEXS-70RX Auto Shut-off Right Angle Pulse Tool (1/4 F/Hex) (20 - 29 N.m)

Flex assembly tools increase productivity and enhance product quality through precision torque control and user comfort. The FlexPower Pulse Tools provide operators with an industry leading power-to-weight ratio, allowing for a smaller tool selection for greater torques giving operators a lighter tool with more torque capability. Built for durability with a superior O-ring design and specially designed pulse fluid FlexPower extends life between regular oil changes and provides more torque stability. Designed to enhance cycle time with high-speed rundown. Note: Recommended air pressure is 85 PSI. Use a high quality air filter regulator and lubricator to ensure stable air pressure for optimal performance and for removal of moisture and other potential debris that can reduce the longevity and performance of pneumatic tools. Model:FLEXS-50R Drive Size:3/8" Sq. Dr. Range: 10.5 - 17 N.m, 7.7 - 12.8 lbf.ft, 1.1 - 1.7 kgf.m. Tool Weight:2.6 lbs. Tool Length:10 Free Speed RPM:4300 Noise DBA:80 Hose Size:1/4" P/W Ratio:14.2 Avg. Air Consumption - American:11.3 ft/min CFM Avg. Air Consumption - Metric:0.32 m/min CMM Pulse Tool Shut-Off Type:Auto Shut-Off

GBP 4299.99
1

Mountz FLEX-40SX Non Shut-off Pulse Tool (1/4 F/Hex) (10 - 18 N.m)

Mountz FLEX-40SX Non Shut-off Pulse Tool (1/4 F/Hex) (10 - 18 N.m)

Flex assembly tools increase productivity and enhance product quality through precision torque control and user comfort. The FlexPower Pulse Tools provide operators with an industry leading power-to-weight ratio, allowing for a smaller tool selection for greater torques giving operators a lighter tool with more torque capability. Built for durability with a superior O-ring design and specially designed pulse fluid FlexPower extends life between regular oil changes and provides more torque stability. Designed to enhance cycle time with high-speed rundown. Note: Recommended air pressure is 85 PSI. Use a high quality air filter regulator and lubricator to ensure stable air pressure for optimal performance and for removal of moisture and other potential debris that can reduce the longevity and performance of pneumatic tools. Model:FLEX-60S Drive Size:3/8" Sq. Dr. Range: 22 - 35 N.m ,16.2 - 25.8 lbf.ft, 2.2 - 3.6 kgf.m. Tool Weight:1.9 lbs. Tool Length:9.1 Free Speed RPM:6000 Noise DBA:80 Hose Size:3/8" P/W Ratio:41.2 Avg. Air Consumption - American:14.1 ft/min CFM Avg. Air Consumption - Metric:0.40 m/min CMM Pulse Tool Shut-Off Type:Non Shut-Off

GBP 2039.99
1

Mountz FLEXS-30SX Auto Shut-off Pulse Tool (1/4 F/Hex) (6 - 12.5 N.m)

Mountz FLEXS-30SX Auto Shut-off Pulse Tool (1/4 F/Hex) (6 - 12.5 N.m)

Flex assembly tools increase productivity and enhance product quality through precision torque control and user comfort. The FlexPower Pulse Tools provide operators with an industry leading power-to-weight ratio, allowing for a smaller tool selection for greater torques giving operators a lighter tool with more torque capability. Built for durability with a superior O-ring design and specially designed pulse fluid FlexPower extends life between regular oil changes and provides more torque stability. Designed to enhance cycle time with high-speed rundown. Note: Recommended air pressure is 85 PSI. Use a high quality air filter regulator and lubricator to ensure stable air pressure for optimal performance and for removal of moisture and other potential debris that can reduce the longevity and performance of pneumatic tools. Model:FLEXS-50S Drive Size:3/8" Sq. Dr. Range: 15 - 27 N.m, 11.1 - 19.9 lbf.ft, 1.5 - 2.8 kgf.m. Tool Weight:1.8 lbs. Tool Length:8.7 Free Speed RPM:7200 Noise DBA:80 Hose Size:1/4" P/W Ratio:33.8 Avg. Air Consumption - American:12.3 ft/min CFM Avg. Air Consumption - Metric:0.35 m/min CMM Pulse Tool Shut-Off Type:Auto Shut-Off

GBP 2899.99
1

Mountz FLEX-50R Non Shut-off Right Angle Pulse Tool (3/8 Square Dr.) (10.5 - 17 N.m)

Mountz FLEX-50R Non Shut-off Right Angle Pulse Tool (3/8 Square Dr.) (10.5 - 17 N.m)

Flex assembly tools increase productivity and enhance product quality through precision torque control and user comfort. The FlexPower Pulse Tools provide operators with an industry leading power-to-weight ratio, allowing for a smaller tool selection for greater torques giving operators a lighter tool with more torque capability. Built for durability with a superior O-ring design and specially designed pulse fluid FlexPower extends life between regular oil changes and provides more torque stability. Designed to enhance cycle time with high-speed rundown. Note: Recommended air pressure is 85 PSI. Use a high quality air filter regulator and lubricator to ensure stable air pressure for optimal performance and for removal of moisture and other potential debris that can reduce the longevity and performance of pneumatic tools. Model:FLEX-70R Drive Size:3/8" Sq. Dr. Range: 22 - 31 N.m, 16.2 - 22.8 lbf.ft, 2.2 - 3.2 kgf.m. Tool Weight:3.1 lbs. Tool Length:10.7 Free Speed RPM:4500 Noise DBA:80 Hose Size:3/8" P/W Ratio:22.1 Avg. Air Consumption - American:14.1 ft/min CFM Avg. Air Consumption - Metric:0.40 m/min CMM Pulse Tool Shut-Off Type:Non Shut-Off

GBP 3399.99
1

Mountz FLEX-70S Non Shut-off Pulse Tool (3/8 Square Dr.) (31 - 47 N.m)

Mountz FLEX-70S Non Shut-off Pulse Tool (3/8 Square Dr.) (31 - 47 N.m)

Flex assembly tools increase productivity and enhance product quality through precision torque control and user comfort. The FlexPower Pulse Tools provide operators with an industry leading power-to-weight ratio, allowing for a smaller tool selection for greater torques giving operators a lighter tool with more torque capability. Built for durability with a superior O-ring design and specially designed pulse fluid FlexPower extends life between regular oil changes and provides more torque stability. Designed to enhance cycle time with high-speed rundown. Note: Recommended air pressure is 85 PSI. Use a high quality air filter regulator and lubricator to ensure stable air pressure for optimal performance and for removal of moisture and other potential debris that can reduce the longevity and performance of pneumatic tools. Model:FLEX-60S Drive Size:3/8" Sq. Dr. Range: 22 - 35 N.m ,16.2 - 25.8 lbf.ft, 2.2 - 3.6 kgf.m. Tool Weight:1.9 lbs. Tool Length:9.1 Free Speed RPM:6000 Noise DBA:80 Hose Size:3/8" P/W Ratio:41.2 Avg. Air Consumption - American:14.1 ft/min CFM Avg. Air Consumption - Metric:0.40 m/min CMM Pulse Tool Shut-Off Type:Non Shut-Off

GBP 2399.99
1

Mountz FLEXS-60RX Auto Shut-off Right Angle Pulse Tool (1/4 F/Hex) (13.5 - 22 N.m)

Mountz FLEXS-60RX Auto Shut-off Right Angle Pulse Tool (1/4 F/Hex) (13.5 - 22 N.m)

Flex assembly tools increase productivity and enhance product quality through precision torque control and user comfort. The FlexPower Pulse Tools provide operators with an industry leading power-to-weight ratio, allowing for a smaller tool selection for greater torques giving operators a lighter tool with more torque capability. Built for durability with a superior O-ring design and specially designed pulse fluid FlexPower extends life between regular oil changes and provides more torque stability. Designed to enhance cycle time with high-speed rundown. Note: Recommended air pressure is 85 PSI. Use a high quality air filter regulator and lubricator to ensure stable air pressure for optimal performance and for removal of moisture and other potential debris that can reduce the longevity and performance of pneumatic tools. Model:FLEXS-50R Drive Size:3/8" Sq. Dr. Range: 10.5 - 17 N.m, 7.7 - 12.8 lbf.ft, 1.1 - 1.7 kgf.m. Tool Weight:2.6 lbs. Tool Length:10 Free Speed RPM:4300 Noise DBA:80 Hose Size:1/4" P/W Ratio:14.2 Avg. Air Consumption - American:11.3 ft/min CFM Avg. Air Consumption - Metric:0.32 m/min CMM Pulse Tool Shut-Off Type:Auto Shut-Off

GBP 3699.99
1

Mountz FLEX-70R Non Shut-off Right Angle Pulse Tool (3/8 Square Dr.) (22 - 31 N.m)

Mountz FLEX-70R Non Shut-off Right Angle Pulse Tool (3/8 Square Dr.) (22 - 31 N.m)

Flex assembly tools increase productivity and enhance product quality through precision torque control and user comfort. The FlexPower Pulse Tools provide operators with an industry leading power-to-weight ratio, allowing for a smaller tool selection for greater torques giving operators a lighter tool with more torque capability. Built for durability with a superior O-ring design and specially designed pulse fluid FlexPower extends life between regular oil changes and provides more torque stability. Designed to enhance cycle time with high-speed rundown. Note: Recommended air pressure is 85 PSI. Use a high quality air filter regulator and lubricator to ensure stable air pressure for optimal performance and for removal of moisture and other potential debris that can reduce the longevity and performance of pneumatic tools. Model:FLEX-70R Drive Size:3/8" Sq. Dr. Range: 22 - 31 N.m, 16.2 - 22.8 lbf.ft, 2.2 - 3.2 kgf.m. Tool Weight:3.1 lbs. Tool Length:10.7 Free Speed RPM:4500 Noise DBA:80 Hose Size:3/8" P/W Ratio:22.1 Avg. Air Consumption - American:14.1 ft/min CFM Avg. Air Consumption - Metric:0.40 m/min CMM Pulse Tool Shut-Off Type:Non Shut-Off

GBP 3399.99
1

Mountz FLEX-70RX Non Shut-off Right Angle Pulse Tool (1/4 F/Hex) (20 - 29 N.m)

Mountz FLEX-70RX Non Shut-off Right Angle Pulse Tool (1/4 F/Hex) (20 - 29 N.m)

Flex assembly tools increase productivity and enhance product quality through precision torque control and user comfort. The FlexPower Pulse Tools provide operators with an industry leading power-to-weight ratio, allowing for a smaller tool selection for greater torques giving operators a lighter tool with more torque capability. Built for durability with a superior O-ring design and specially designed pulse fluid FlexPower extends life between regular oil changes and provides more torque stability. Designed to enhance cycle time with high-speed rundown. Note: Recommended air pressure is 85 PSI. Use a high quality air filter regulator and lubricator to ensure stable air pressure for optimal performance and for removal of moisture and other potential debris that can reduce the longevity and performance of pneumatic tools. Model:FLEX-70R Drive Size:3/8" Sq. Dr. Range: 22 - 31 N.m, 16.2 - 22.8 lbf.ft, 2.2 - 3.2 kgf.m. Tool Weight:3.1 lbs. Tool Length:10.7 Free Speed RPM:4500 Noise DBA:80 Hose Size:3/8" P/W Ratio:22.1 Avg. Air Consumption - American:14.1 ft/min CFM Avg. Air Consumption - Metric:0.40 m/min CMM Pulse Tool Shut-Off Type:Non Shut-Off

GBP 3699.99
1

Mountz FLEX-70RG Non Shut-off Right Angle Pulse Tool (3/8 Square Dr.) (37 - 50 N.m)

Mountz FLEX-70RG Non Shut-off Right Angle Pulse Tool (3/8 Square Dr.) (37 - 50 N.m)

Flex assembly tools increase productivity and enhance product quality through precision torque control and user comfort. The FlexPower Pulse Tools provide operators with an industry leading power-to-weight ratio, allowing for a smaller tool selection for greater torques giving operators a lighter tool with more torque capability. Built for durability with a superior O-ring design and specially designed pulse fluid FlexPower extends life between regular oil changes and provides more torque stability. Designed to enhance cycle time with high-speed rundown. Note: Recommended air pressure is 85 PSI. Use a high quality air filter regulator and lubricator to ensure stable air pressure for optimal performance and for removal of moisture and other potential debris that can reduce the longevity and performance of pneumatic tools. Model:FLEX-70R Drive Size:3/8" Sq. Dr. Range: 22 - 31 N.m, 16.2 - 22.8 lbf.ft, 2.2 - 3.2 kgf.m. Tool Weight:3.1 lbs. Tool Length:10.7 Free Speed RPM:4500 Noise DBA:80 Hose Size:3/8" P/W Ratio:22.1 Avg. Air Consumption - American:14.1 ft/min CFM Avg. Air Consumption - Metric:0.40 m/min CMM Pulse Tool Shut-Off Type:Non Shut-Off

GBP 3999.99
1

Mountz FLEX-40S Non Shut-off Pulse Tool (3/8 Square Dr.) (11 - 19 N.m)

Mountz FLEX-40S Non Shut-off Pulse Tool (3/8 Square Dr.) (11 - 19 N.m)

Flex assembly tools increase productivity and enhance product quality through precision torque control and user comfort. The FlexPower Pulse Tools provide operators with an industry leading power-to-weight ratio, allowing for a smaller tool selection for greater torques giving operators a lighter tool with more torque capability. Built for durability with a superior O-ring design and specially designed pulse fluid FlexPower extends life between regular oil changes and provides more torque stability. Designed to enhance cycle time with high-speed rundown. Note: Recommended air pressure is 85 PSI. Use a high quality air filter regulator and lubricator to ensure stable air pressure for optimal performance and for removal of moisture and other potential debris that can reduce the longevity and performance of pneumatic tools. Model:FLEX-60S Drive Size:3/8" Sq. Dr. Range: 22 - 35 N.m ,16.2 - 25.8 lbf.ft, 2.2 - 3.6 kgf.m. Tool Weight:1.9 lbs. Tool Length:9.1 Free Speed RPM:6000 Noise DBA:80 Hose Size:3/8" P/W Ratio:41.2 Avg. Air Consumption - American:14.1 ft/min CFM Avg. Air Consumption - Metric:0.40 m/min CMM Pulse Tool Shut-Off Type:Non Shut-Off

GBP 2039.99
1

Mountz FLEXS-50S Auto Shut-off Pulse Tool (3/8 Square Dr.) (15 - 27 N.m)

Mountz FLEXS-50S Auto Shut-off Pulse Tool (3/8 Square Dr.) (15 - 27 N.m)

Flex assembly tools increase productivity and enhance product quality through precision torque control and user comfort. The FlexPower Pulse Tools provide operators with an industry leading power-to-weight ratio, allowing for a smaller tool selection for greater torques giving operators a lighter tool with more torque capability. Built for durability with a superior O-ring design and specially designed pulse fluid FlexPower extends life between regular oil changes and provides more torque stability. Designed to enhance cycle time with high-speed rundown. Note: Recommended air pressure is 85 PSI. Use a high quality air filter regulator and lubricator to ensure stable air pressure for optimal performance and for removal of moisture and other potential debris that can reduce the longevity and performance of pneumatic tools. Model:FLEXS-50S Drive Size:3/8" Sq. Dr. Range: 15 - 27 N.m, 11.1 - 19.9 lbf.ft, 1.5 - 2.8 kgf.m. Tool Weight:1.8 lbs. Tool Length:8.7 Free Speed RPM:7200 Noise DBA:80 Hose Size:1/4" P/W Ratio:33.8 Avg. Air Consumption - American:12.3 ft/min CFM Avg. Air Consumption - Metric:0.35 m/min CMM Pulse Tool Shut-Off Type:Auto Shut-Off

GBP 2899.99
1

Mountz FLEXS-60S Auto Shut-off Pulse Tool (3/8 Square Dr.) (22 - 35 N.m)

Mountz FLEXS-60S Auto Shut-off Pulse Tool (3/8 Square Dr.) (22 - 35 N.m)

Flex assembly tools increase productivity and enhance product quality through precision torque control and user comfort. The FlexPower Pulse Tools provide operators with an industry leading power-to-weight ratio, allowing for a smaller tool selection for greater torques giving operators a lighter tool with more torque capability. Built for durability with a superior O-ring design and specially designed pulse fluid FlexPower extends life between regular oil changes and provides more torque stability. Designed to enhance cycle time with high-speed rundown. Note: Recommended air pressure is 85 PSI. Use a high quality air filter regulator and lubricator to ensure stable air pressure for optimal performance and for removal of moisture and other potential debris that can reduce the longevity and performance of pneumatic tools. Model:FLEXS-50S Drive Size:3/8" Sq. Dr. Range: 15 - 27 N.m, 11.1 - 19.9 lbf.ft, 1.5 - 2.8 kgf.m. Tool Weight:1.8 lbs. Tool Length:8.7 Free Speed RPM:7200 Noise DBA:80 Hose Size:1/4" P/W Ratio:33.8 Avg. Air Consumption - American:12.3 ft/min CFM Avg. Air Consumption - Metric:0.35 m/min CMM Pulse Tool Shut-Off Type:Auto Shut-Off

GBP 2499.99
1

Mountz FLEX-80RH Non Shut-off Right Angle Pulse Tool (1/2 Square Dr.) (50 - 70 N.m)

Mountz FLEX-80RH Non Shut-off Right Angle Pulse Tool (1/2 Square Dr.) (50 - 70 N.m)

Flex assembly tools increase productivity and enhance product quality through precision torque control and user comfort. The FlexPower Pulse Tools provide operators with an industry leading power-to-weight ratio, allowing for a smaller tool selection for greater torques giving operators a lighter tool with more torque capability. Built for durability with a superior O-ring design and specially designed pulse fluid FlexPower extends life between regular oil changes and provides more torque stability. Designed to enhance cycle time with high-speed rundown. Note: Recommended air pressure is 85 PSI. Use a high quality air filter regulator and lubricator to ensure stable air pressure for optimal performance and for removal of moisture and other potential debris that can reduce the longevity and performance of pneumatic tools. Model:FLEX-70R Drive Size:3/8" Sq. Dr. Range: 22 - 31 N.m, 16.2 - 22.8 lbf.ft, 2.2 - 3.2 kgf.m. Tool Weight:3.1 lbs. Tool Length:10.7 Free Speed RPM:4500 Noise DBA:80 Hose Size:3/8" P/W Ratio:22.1 Avg. Air Consumption - American:14.1 ft/min CFM Avg. Air Consumption - Metric:0.40 m/min CMM Pulse Tool Shut-Off Type:Non Shut-Off

GBP 4199.99
1