775 results (0,19882 seconds)

Show all filters

Brand

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Medway ROLLER CHAIN SPROCKETS & PLATEWHEELS - 16SR23 SPKT

Medway ROLLER CHAIN SPROCKETS & PLATEWHEELS - 16SR23 SPKT

3/4" Duplex - Pilot Bore A full range of sprockets in both Taper bore & Pilot bore are available in Simplex, Duplex and Triplex styles. We also carry a complete range of taper bore bushes and keyway steels to suit. All sprockets are manufactured to exacting standards and specification Taper bore bush versions allow for quick and simple installation without the need to machine the sprocket Boring and keyway service for pilot bore sprockets is available on request Cast iron and stainless steel sprockets are also available Double pilot type also available

GBP 249.99
1

Medway ROLLER CHAIN SPROCKETS & PLATEWHEELS - 16SR19 SPKT

Medway ROLLER CHAIN SPROCKETS & PLATEWHEELS - 16SR19 SPKT

3/4" Duplex - Pilot Bore A full range of sprockets in both Taper bore & Pilot bore are available in Simplex, Duplex and Triplex styles. We also carry a complete range of taper bore bushes and keyway steels to suit. All sprockets are manufactured to exacting standards and specification Taper bore bush versions allow for quick and simple installation without the need to machine the sprocket Boring and keyway service for pilot bore sprockets is available on request Cast iron and stainless steel sprockets are also available Double pilot type also available

GBP 179.99
1

Medway ROLLER CHAIN SPROCKETS & PLATEWHEELS - 16SR21 SPKT

Medway ROLLER CHAIN SPROCKETS & PLATEWHEELS - 16SR21 SPKT

3/4" Duplex - Pilot Bore A full range of sprockets in both Taper bore & Pilot bore are available in Simplex, Duplex and Triplex styles. We also carry a complete range of taper bore bushes and keyway steels to suit. All sprockets are manufactured to exacting standards and specification Taper bore bush versions allow for quick and simple installation without the need to machine the sprocket Boring and keyway service for pilot bore sprockets is available on request Cast iron and stainless steel sprockets are also available Double pilot type also available

GBP 209.99
1

Medway ROLLER CHAIN SPROCKETS & PLATEWHEELS - 81-30-3020-D/SIMPLEX

Medway ROLLER CHAIN SPROCKETS & PLATEWHEELS - 81-30-3020-D/SIMPLEX

1" Simplex - Taper Bore A full range of sprockets in both Taper bore & Pilot bore are available in Simplex, Duplex and Triplex styles. We also carry a complete range of taper bore bushes and keyway steels to suit. All sprockets are manufactured to exacting standards and specification Taper bore bush versions allow for quick and simple installation without the need to machine the sprocket Boring and keyway service for pilot bore sprockets is available on request Cast iron and stainless steel sprockets are also available Double pilot type also available

GBP 249.99
1

Medway SPA630/4 Pilot Bore 4- Groove Pulley

Medway SPA630/4 Pilot Bore 4- Groove Pulley

Dunlop SPA V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPA (12.7 mm). Part numbers are identified by 3 letters (e.g. SPA) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 309.99
1

Medway SPB355/4 Pilot Bore 4-Groove Pulley

Medway SPB355/4 Pilot Bore 4-Groove Pulley

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3 mm). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 209.99
1

Medway V-BELT PULLEY - SPC200/4-PB

Medway V-BELT PULLEY - SPC200/4-PB

Dunlop SPC V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPC (22mm). Part numbers are identified by 3 letters (e.g. SPC) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPC250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 229.99
1

Medway SPB450/3 Pilot Bore 3-Groove Pulley

Medway SPB450/3 Pilot Bore 3-Groove Pulley

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3 mm). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 239.99
1

Medway V-Belt PULLEYSPC180/4-PB

Medway V-Belt PULLEYSPC180/4-PB

Dunlop SPC V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPC (22mm). Part numbers are identified by 3 letters (e.g. SPC) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPC250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 189.99
1

Medway SPA400/4 Pilot Bore 4-Groove Pulley

Medway SPA400/4 Pilot Bore 4-Groove Pulley

Dunlop SPA V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPA (12.7 mm). Part numbers are identified by 3 letters (e.g. SPA) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 179.99
1

Medway V-BELT PULLEY - SPC300/2-PB

Medway V-BELT PULLEY - SPC300/2-PB

Dunlop SPC V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPC (22mm). Part numbers are identified by 3 letters (e.g. SPC) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPC250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 239.99
1

Medway SPB355/3 Pilot Bore 3-Groove Pulley

Medway SPB355/3 Pilot Bore 3-Groove Pulley

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3 mm). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 179.99
1

Medway SPC200/5 Pilot Bore 5- Groove Pulley

Medway SPC200/5 Pilot Bore 5- Groove Pulley

Dunlop SPC V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPC (22mm). Part numbers are identified by 3 letters (e.g. SPC) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPC250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 199.99
1

Medway V-BELT PULLEY - SPB340/6-PB

Medway V-BELT PULLEY - SPB340/6-PB

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3 mm). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 399.99
1

Medway SPC335/2 Pilot Bore 2- Groove Pulley

Medway SPC335/2 Pilot Bore 2- Groove Pulley

Dunlop SPC V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPC (22mm). Part numbers are identified by 3 letters (e.g. SPC) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPC250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 199.99
1

Medway V-BELT PULLEY - SPC180/5-PB

Medway V-BELT PULLEY - SPC180/5-PB

Dunlop SPC V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPC (22mm). Part numbers are identified by 3 letters (e.g. SPC) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPC250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 219.99
1

Medway V-BELT PULLEY - SPB340/3-PB

Medway V-BELT PULLEY - SPB340/3-PB

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3 mm). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 179.99
1

Medway V-BELT PULLEY - SPC280/4-PB

Medway V-BELT PULLEY - SPC280/4-PB

Dunlop SPC V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPC (22mm). Part numbers are identified by 3 letters (e.g. SPC) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPC250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 399.99
1

Medway SPB400/4 Pilot Bore 4-Groove Pulley

Medway SPB400/4 Pilot Bore 4-Groove Pulley

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3 mm). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 259.99
1

Medway V-BELT PULLEY - SPB280/6-PB

Medway V-BELT PULLEY - SPB280/6-PB

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3 mm). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 239.99
1

Medway SPC450/2 Pilot Bore 2- Groove Pulley

Medway SPC450/2 Pilot Bore 2- Groove Pulley

Dunlop SPC V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPC (22mm). Part numbers are identified by 3 letters (e.g. SPC) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPC250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 199.99
1

Medway SPB450/2 Pilot Bore 2- Groove Pulley

Medway SPB450/2 Pilot Bore 2- Groove Pulley

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3 mm). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 199.99
1

Medway V-BELT PULLEY - SPB425/3-PB

Medway V-BELT PULLEY - SPB425/3-PB

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3 mm). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 239.99
1