40 results (0,18661 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Makita DTW450z 18V 1/2" Impact Wrench Naked

Makita DTW450z 18V 1/2" Impact Wrench Naked

Same fastening torque in forward and reverse rotations with full torque at 6 seconds after seating. Compact design provides more control and maneuverability. Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact. The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are joined with vibration absorbing cushion rubbers. The large bumper protects workpiece from scratches,increasing maneuverability. Ergonomically designed handle with rubberized soft grip provides more control and comfort. Easy-to-operate LED light for illuminated operation can be turned on or off with an independent switch, and features an over-discharge-protective circuit. Also features a hanging hook. Capacities: standard bolt M12 - M22, high tensile bolt M12 - M16. Battery capacity: 3.0Ah. *Naked tool only

GBP 249.99
1

Makita TD110DZ 10.8V CXT Slide Impact Driver (Body Only)

Makita TD110DZ 10.8V CXT Slide Impact Driver (Body Only)

The Makita Impact Driver: a compact and lightweight design with a maximum torque. This tool also features an electric break that stops the rotation almost immediately, LED light with afterglow and a single sleeve chuck for a rapid bit changeover. Voltage: 10.8V Max Torque: 110NM Brake Type: Electric No Load Speed: 0-2600rpm Screw Capacity: M4-M8 Bolt Capacity: M5-M12 Impacts per Minute: 0-3500ipm Driving Shank: 1/4" Overall Length: 153mm

GBP 69.99
1

Makita DTD152Z LXT Impact Driver 18V Bare Unit

Makita DTD152Z LXT Impact Driver 18V Bare Unit

The Makita DTD152Z LXT Impact Driver comes with an ergonomically designed handle and one-touch bit installation. Also equipped with an electric brake, variable speed control and a reverse switch for ultimate control. Comes as a Bare Unit, No Battery or Charger. Specifications: Bit Holder: 6.35mm (1/4in) No Load Speed: 0-2, 900/min. Impact Rate: 0-3, 500/bpm. Max. Torque: 165Nm. Standard Bolt: M5-M16, High Tensile Bolt: M5-M12. Weight: 1.3kg.

GBP 119.99
1

Makita A-86898 Jigsaw Blades for Wood PVC & Metal (5 Pack)

Makita A-86898 Jigsaw Blades for Wood PVC & Metal (5 Pack)

Pack of 5 Makita jigsaw blades for cutting an assortment of materials like wood, metal and PVC The Makita A-86898 is a 5 Pack of Assorted Jigsaw Blades which cut through a variety of materials. These blades will fit the following manufacturer's machines: Makita, Bosch, Festool, Black and Decker, Dewalt, Elu, AEG, Milwaukee and Metabo. Features: Application: Woodworking, Joinery and Sheet Metal Contains the 5 most popular blades in the Makita blade range Flexibility to complete many tasks in wood and metal Blade selection pack contains: B22, B23, B13, B16 and B10S Specification: 1 x B-10S for Wood B-16 T144D for Wood B-13 T111C for Wood B-23 T118B for PVC or Wood with Nails B-22 T118A for Metal

GBP 8.19
1

Makita TW0350 1/2in Impact Wrench 400W 110V MAKTW0350L

Makita TW0350 1/2in Impact Wrench 400W 110V MAKTW0350L

The Makita TW0350 Impact Wrench is capable of producing an incredibly high torque of 350Nm (260ft.lbs) and has forward/reverse rotation. It is equipped with a palm-fitting soft grip for comfortable work and is double insulated for increased user safety. It is supplied with a 24mm Socket and a Carry Case. Specification Bit Holder 1/2in Input Power 400W No Load Speed 2,000/min. Impact Rate 2,000/bpm Max. Torque 350Nm Max. Socket Size 32mm A/F, Bolt Range M12-M22 Weight 3.0kg

GBP 409.99
1

Makita TD110DWAE 10.8V CXT Slide Impact Driver

Makita TD110DWAE 10.8V CXT Slide Impact Driver

The Makita Impact Driver: a compact and lightweight design with a maximum torque. This tool also features an electric break that stops the rotation almost immediately, LED light with afterglow and a single sleeve chuck for a rapid bit changeover. Comes with 1x TD110D Impact Driver, 2x BL1020B 2.0Ah 10.8v Slide Batteries, 1x DC10WC 10.8v Slide Charger, 1x Belt Clip, 1x Makpac Connector Case Type 1. Voltage: 10.8V Max Torque: 110NM Brake Type: Electric No Load Speed: 0-2600rpm Screw Capacity: M4-M8 Bolt Capacity: M5-M12 Impacts per Minute: 0-3500ipm Driving Shank: 1/4" Overall Length: 153mm

GBP 159.99
1

Makita DTD157Z BL LXT Impact Driver 18V Bare Unit MAKDTD157Z

Makita DTD157Z BL LXT Impact Driver 18V Bare Unit MAKDTD157Z

The Makita DTD157 LXT Impact Driver has a powerful brushless motor and electronic 2-speed impact power selection. Variable speed is controlled via a trigger. It also has an assist mode for controlled screwdriving. Fitted with an ergonomically designed high comfort grip. There is also an electric brake and an LED job light. Supplied as a Bare Unit - No Battery or Charger. Specification Driving Shank 6.35mm (1/4in) No Load Speed 0-1,300/0-3,000/min. Impact Rate 0-2,000/0-4,100/bpm Max. Fastening Torque 140Nm Capacity Bolt Standard M5-M14, High Tensile M5-M12 Machine Screw M4-M8 Coarse Thread 22-90mm Weight 1.2kg

GBP 122.99
1

Makita P-43583 Sanding Discs 180 Grit 125mm (10 Pack)

Makita P-43583 Sanding Discs 180 Grit 125mm (10 Pack)

Makita P-43583 Sanding Discs 125mm 180 Grit (Pack Of 10) The Makita P-43583 is a Pack of 10, 125mm Diameter, Sanding Pads with a 180 Grit rating and 8 Holes for dust extraction. They give an excellent sanding performance for professional use. Use dust extractor for improved health. Velcro fitting provides smoother sanding, perfect for use with random orbit sanders. The grit size is determined by the number of holes per square inch required by a sieve designed to collect the grit. The smaller the number, the coarser the cut. Compatible with: Makita DBO180/140, BO5010/12/21,BO5030/31/41: Bosch, B&D, DeWalt, Metabo, Milwaukee and Festool. Features: Application: Sanding, wood, metal, decorating, confined areas, detail sanding Extra hard wearing aluminium oxide and velcro backed disc 8 holes for dust extraction Material: Wood, Regular Steel, Painted Wood Specification: Part Number: P-43583 Diameter: 125mm Grit: 180 Velcro Backed: Yes Pack Quantity: 10

GBP 6.19
1

Makita P-43533 Sanding Discs 40 Grit 125mm (10 Pack)

Makita P-43533 Sanding Discs 40 Grit 125mm (10 Pack)

Makita P-43533 Sanding Discs 125mm 40 Grit (Pack Of 10) The Makita P-43533 is a Pack of 10, 125mm Diameter, Sanding Pads with a 40 Grit rating and 8 Holes for dust extraction. They give an excellent sanding performance for professional use. Use dust extractor for improved health. Velcro fitting provides smoother sanding, perfect for use with random orbit sanders. The grit size is determined by the number of holes per square inch required by a sieve designed to collect the grit. The smaller the number, the coarser the cut. Compatible with: Makita DBO180/140, BO5010/12/21,BO5030/31/41: Bosch, B&D, DeWalt, Metabo, Milwaukee and Festool. Features: Application: Sanding, wood, metal, decorating, confined areas, detail sanding Extra hard wearing aluminium oxide and velcro backed disc 8 holes for dust extraction Material: Wood, Regular Steel, Painted Wood Specification: Part Number: P-43533 Diameter: 125mm Grit: 40 Velcro Backed: Yes Pack Quantity: 10

GBP 6.59
1

Makita P-43549 Sanding Discs 60 Grit 125mm (10 Pack)

Makita P-43549 Sanding Discs 60 Grit 125mm (10 Pack)

Makita P-43549 Sanding Discs 125mm 60 Grit (Pack Of 10) The Makita P-43549 is a Pack of 10, 125mm Diameter, Sanding Pads with a 60 Grit rating and 8 Holes for dust extraction. They give an excellent sanding performance for professional use. Use dust extractor for improved health. Velcro fitting provides smoother sanding, perfect for use with random orbit sanders. The grit size is determined by the number of holes per square inch required by a sieve designed to collect the grit. The smaller the number, the coarser the cut. Compatible with: Makita DBO180/140, BO5010/12/21,BO5030/31/41: Bosch, B&D, DeWalt, Metabo, Milwaukee and Festool. Features: Application: Sanding, wood, metal, decorating, confined areas, detail sanding Extra hard wearing aluminium oxide and velcro backed disc 8 holes for dust extraction Material: Wood, Regular Steel, Painted Wood Specification: Part Number: P-43549 Diameter: 125mm Grit: 60 Velcro Backed: Yes Pack Quantity: 10

GBP 6.49
1

Makita P-43577 Sanding Discs 120 Grit 125mm (10 Pack)

Makita P-43577 Sanding Discs 120 Grit 125mm (10 Pack)

For an excellent sanding performance, choose The Makita P-43577 Sanding Discs The Makita P-43577 is a Pack of 10, 125mm Diameter, Sanding Pads with a 120 Grit rating and 8 Holes for dust extraction. They give an excellent sanding performance for professional use. Use dust extractor for improved health. Velcro fitting provides smoother sanding, perfect for use with random orbit sanders. The grit size is determined by the number of holes per square inch required by a sieve designed to collect the grit. The smaller the number, the coarser the cut. Compatible with: Makita DBO180/140, BO5010/12/21, BO5030/31/41: Bosch, B&D, DeWalt, Metabo, Milwaukee and Festool. Features: 8 holes for dust extraction Material: Wood, Regular Steel, Painted Wood Extra hard wearing aluminium oxide and velcro backed disc Application: Sanding, wood, metal, decorating, confined areas, detail sanding Specification: Grit: 120 Pack Quantity: 10 Diameter: 125mm Velcro Backed: Yes Part Number: P-43577

GBP 6.99
1

Makita P-43599 Sanding Discs 240 Grit 125mm (10 Pack)

Makita P-43599 Sanding Discs 240 Grit 125mm (10 Pack)

Makita P-43599 Sanding Discs 125mm 240 Grit (Pack Of 10) The Makita P-43599 is a Pack of 10, 125mm Diameter, Sanding Pads with a 240 Grit rating and 8 Holes for dust extraction. They give an excellent sanding performance for professional use. Use dust extractor for improved health. Velcro fitting provides smoother sanding, perfect for use with random orbit sanders. The grit size is determined by the number of holes per square inch required by a sieve designed to collect the grit. The smaller the number, the coarser the cut. Compatible with: Makita DBO180/140, BO5010/12/21,BO5030/31/41: Bosch, B&D, DeWalt, Metabo, Milwaukee and Festool. Features: Application: Sanding, wood, metal, decorating, confined areas, detail sanding Extra hard wearing aluminium oxide and velcro backed disc 8 holes for dust extraction Material: Wood, Regular Steel, Painted Wood Specification: Part Number: P-43599 Diameter: 125mm Grit: 240 Velcro Backed: Yes Pack Quantity: 10

GBP 6.29
1

Makita DTW180RTJ 18V 3/8" Impact Wrench, 1X 5AH Battery

Makita DTW180RTJ 18V 3/8" Impact Wrench, 1X 5AH Battery

Makita DTW180 Brushless LXT Impact Wrench with 2-stage impact power selection, trigger controlled variable speed and forward/reverse rotation for complete control. There is also a reverse rotation auto-stop mode this mode works only with pulling the trigger fully in counter-clockwise rotation. When the bolt/nut gets loosened sufficiently, the tool stops the impact and rotation in 0.2 seconds. It has a compact, lightweight design that incorporates an ergonomic, soft grip for increased comfort and control. The electric brake provides increased safety during operation and its LED job light is ideal for jobs in darker areas. Specification Bit Holder 3/8in Square No Load Speed 0-1,300/0-2,400/min. Impact Rate 0-2,000/0-3,600/bpm Max. Fastening Torque 180Nm Max. Nut Busting Torque 310Nm Bolt Capacity Standard M8-M16, High Tensile M6-M12 Weight 1.2kg

GBP 399.99
1

Makita DTW180z 18V LXT 3/8" Brushless Impact Wrench - Body Only Version - No Batteries or Charger Supplied

Makita DTW180z 18V LXT 3/8" Brushless Impact Wrench - Body Only Version - No Batteries or Charger Supplied

Makita DTW180 Brushless LXT Impact Wrench with 2-stage impact power selection, trigger controlled variable speed and forward/reverse rotation for complete control. There is also a reverse rotation auto-stop mode this mode works only with pulling the trigger fully in counter-clockwise rotation. When the bolt/nut gets loosened sufficiently, the tool stops the impact and rotation in 0.2 seconds. It has a compact, lightweight design that incorporates an ergonomic, soft grip for increased comfort and control. The electric brake provides increased safety during operation and its LED job light is ideal for jobs in darker areas. Specification Bit Holder 3/8in Square No Load Speed 0-1,300/0-2,400/min. Impact Rate 0-2,000/0-3,600/bpm Max. Fastening Torque 180Nm Max. Nut Busting Torque 310Nm Bolt Capacity Standard M8-M16, High Tensile M6-M12 Weight 1.2kg

GBP 149.99
1

Makita TW001GZ XGT 40Vmax BL Impact Wrench 40V Bare Unit

Makita TW001GZ XGT 40Vmax BL Impact Wrench 40V Bare Unit

The Makita TW001G XGT 40Vmax BL Impact Wrench has an efficient brushless impact wrench with electronic 4 stage impact power selection for added versatility. 3 modes of reaction time allow for automatic stop available both in forward and reverse rotation modes. Reverse rotation auto stop mode stops after the bolt/nut loosened enough. Its ergonomically designed handle features a rubberised soft grip for increased user comfort and reduced fatique. XPT (Extreme Protection Technology) provides improved dust and water resistance for operation in harsh job site conditions. The battery protection system automatically shuts off power when the battery level is low. Its also features twin LED lights with pre-glow and afterglow functions. Specifications: Bit Holder: 3/4in Square C Ring.No Load Speed: 0-950/1,150/1,400/1,800/min.Impact Rate: 0-1,900/2,200/2,400/2,500/bpm.Max. Torque: 1,800Nm.Nut Busting Torque: 2,050Nm.Bolt Capacity: Standard: M12-M36.

GBP 0.00
1

Makita DTW701Z BL LXT Impact Wrench 18V Bare Unit MAKDTW701Z

Makita DTW701Z BL LXT Impact Wrench 18V Bare Unit MAKDTW701Z

The Makita DTW701 Brushless LXT Impact Wrench is compact and lightweight and features an electronic 4-stage impact power selection, and an auto-stop system, available both in forward/reverse rotation modes. Trigger switch with full-speed mode: variable speed mode can be changed to full-speed mode simply by pushing a button. In full-speed mode the trigger travel is shorter, the full-speed is reached faster.Fitted with an ergonomic soft grip and an electric brake for added safety. There is also a handy LED job light, ideal when working in dark areas. Specifications: Driving Shank: 1/2in Square Drive, Pin Detent.No Load Speed: 500/1,200/1,900/0-2,200/min.Impact Rate: 0-1,000/0-1,700/0-2,400/0-2,700/bpm.Torque: Max. Fastening 700Nm, Nut Busting: 1,000Nm.Bolt Capacity: Standard: M10 - M24, High Strength: Grade F10T M12 - M16, Grade 10.9 M10 - M16Weight: 2.3kg (without battery).

GBP 319.99
1

Makita DTW700Z BL LXT Impact Wrench 18V Bare Unit MAKDTW700Z

Makita DTW700Z BL LXT Impact Wrench 18V Bare Unit MAKDTW700Z

The Makita DTW701 Brushless LXT Impact Wrench is compact and lightweight and features an electronic 4-stage impact power selection, and an auto-stop system, available both in forward/reverse rotation modes. Trigger switch with full-speed mode: variable speed mode can be changed to full-speed mode simply by pushing a button. In full-speed mode the trigger travel is shorter, the full-speed is reached faster.Fitted with an ergonomic soft grip and an electric brake for added safety. There is also a handy LED job light, ideal when working in dark areas. Specifications: Driving Shank: 1/2in Square Drive, Pin Detent.No Load Speed: 500/1,200/1,900/0-2,200/min.Impact Rate: 0-1,000/0-1,700/0-2,400/0-2,700/bpm.Torque: Max. Fastening 700Nm, Nut Busting: 1,000Nm.Bolt Capacity: Standard: M10 - M24, High Strength: Grade F10T M12 - M16, Grade 10.9 M10 - M16Weight: 2.3kg (without battery).

GBP 299.99
1

Makita DTW300Z Brushless LXT 1/2in Impact Wrench 18V Bare Unit MAKDTW300Z

Makita DTW300Z Brushless LXT 1/2in Impact Wrench 18V Bare Unit MAKDTW300Z

The Makita DTW701 Brushless LXT Impact Wrench is compact and lightweight and features an electronic 4-stage impact power selection, and an auto-stop system, available both in forward/reverse rotation modes. Trigger switch with full-speed mode: variable speed mode can be changed to full-speed mode simply by pushing a button. In full-speed mode the trigger travel is shorter, the full-speed is reached faster.Fitted with an ergonomic soft grip and an electric brake for added safety. There is also a handy LED job light, ideal when working in dark areas. Specifications: Driving Shank: 1/2in Square Drive, Pin Detent.No Load Speed: 500/1,200/1,900/0-2,200/min.Impact Rate: 0-1,000/0-1,700/0-2,400/0-2,700/bpm.Torque: Max. Fastening 700Nm, Nut Busting: 1,000Nm.Bolt Capacity: Standard: M10 - M24, High Strength: Grade F10T M12 - M16, Grade 10.9 M10 - M16Weight: 2.3kg (without battery).

GBP 189.99
1

Makita TW001GD201 XGT 40Vmax BL Impact Wrench 40V 2 x 2.5Ah Li-ion

Makita TW001GD201 XGT 40Vmax BL Impact Wrench 40V 2 x 2.5Ah Li-ion

The Makita TW001G XGT 40Vmax BL Impact Wrench has an efficient brushless impact wrench with electronic 4 stage impact power selection for added versatility. 3 modes of reaction time allow for automatic stop available both in forward and reverse rotation modes. Reverse rotation auto stop mode stops after the bolt/nut loosened enough. Its ergonomically designed handle features a rubberised soft grip for increased user comfort and reduced fatique. XPT (Extreme Protection Technology) provides improved dust and water resistance for operation in harsh job site conditions. The battery protection system automatically shuts off power when the battery level is low. Its also features twin LED lights with pre-glow and afterglow functions. Specifications: Bit Holder: 3/4in Square C Ring.No Load Speed: 0-950/1,150/1,400/1,800/min.Impact Rate: 0-1,900/2,200/2,400/2,500/bpm.Max. Torque: 1,800Nm.Nut Busting Torque: 2,050Nm.Bolt Capacity: Standard: M12-M36.

GBP 999.99
1

Makita TW0350 1/2in Drive Impact Wrench (110V)

Makita TW0350 1/2in Drive Impact Wrench (110V)

Makita TW0350 1/2" Drive impact wrench, complete with 24mm socket, and carrying case. This product has also been double insulated for safety. Available in 110 volts only. The Makita TW0350 is a high power impact wrench suited to heavy-duty applications up to 350Nm. The externally accessible brushes allow for easy replacement and precision gearing with ball and needle bearing construction ensures smooth and efficient power transmission. This model comes equipped with a palm-fitting soft grip for comfortable work. Features: Incredibly high torque of 350Nm Palm fitting soft grip for comfortable work forward/reverse rotation Double insulated Comes with: 24mm socket Complete with carrying case Double insulated for safety Forward/reverse rotation Specification: Bolt Range: M12-M22 Max. Socket Size: 32mm A/F Max. Torque: 350Nm Impacts per Minute: 2,000ipm No Load Speed: 2,000rpm Input wattage: 400w Net Weight: 2.9kg 110 volts

GBP 309.99
1

Makita TD001GD201 XGT 40Vmax BL Impact Wrench 40V 2 x 2.5Ah Li-ion

Makita TD001GD201 XGT 40Vmax BL Impact Wrench 40V 2 x 2.5Ah Li-ion

The Makita TW001G XGT 40Vmax BL Impact Wrench has an efficient brushless impact wrench with electronic 4 stage impact power selection for added versatility. 3 modes of reaction time allow for automatic stop available both in forward and reverse rotation modes. Reverse rotation auto stop mode stops after the bolt/nut loosened enough. Its ergonomically designed handle features a rubberised soft grip for increased user comfort and reduced fatique. XPT (Extreme Protection Technology) provides improved dust and water resistance for operation in harsh job site conditions. The battery protection system automatically shuts off power when the battery level is low. Its also features twin LED lights with pre-glow and afterglow functions. Specifications: Bit Holder: 3/4in Square C Ring.No Load Speed: 0-950/1,150/1,400/1,800/min.Impact Rate: 0-1,900/2,200/2,400/2,500/bpm.Max. Torque: 1,800Nm.Nut Busting Torque: 2,050Nm.Bolt Capacity: Standard: M12-M36.

GBP 919.99
1

Makita TW002GZ01 XGT 40Vmax Bl Impact Wrench 40V Bare Unit

Makita TW002GZ01 XGT 40Vmax Bl Impact Wrench 40V Bare Unit

The Makita TW002G XGT 40Vmax BL Impact Wrenchhas an efficient brushless impact wrench with electronic 4 stage impact power selection for added versatility. 3 modes of reaction time allow for automatic stop, available both in forward and reverse rotation modes. Reverse rotation auto stop mode stops after the bolt/nut loosened enough.Its ergonomically designed handle features a rubberised soft grip for increased user comfort and reduced fatique. XPT (Extreme Protection Technology) provides improved dust and water resistance for operation in harsh job site conditions. The battery protection system automatically shuts off power when the battery level is low. Its also features twin LED lights with pre-glow and afterglow functions.Comes as a Bare Unit, NO battery or charger supplied.Specifications:Bit Holder: 1/2in Square C RingNo Load Speed: 0-850/900/1, 000/1, 800/min.Impact Rate: 0-1, 700/1, 800/2, 000/2, 400/bpmMax. Torque: 280/630/1, 100/1, 700NmNut Busting Torque: 2, 200NmBolt Capacity: Standard M12-M36, High Tensile BoltM10-M27

GBP 319.99
1