71 results (0,17313 seconds)

Show all filters

Brand

Gender

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Makita HR4511C SDS Max AVT Rotary Demolition Hammer 1350W 240V MAKHR4511C

Makita HR4511C SDS Max AVT Rotary Demolition Hammer 1350W 240V MAKHR4511C

The Makita HR4511C SDS Max AVT Rotary Demolition Hammer has 2 modes of operation: Rotary Hammer and Hammer only. It is fitted with an anti-vibration system for ultra-low vibration. It is also fitted with a padded, spring loaded, hinged rubberised grip and comes with 2 side handles for increased control.The hammer has a torque limiter so when drill hits reinforcement the torque limiter stops power and a recessed change lever mounted on top of machine to reduce breakage even if machine is dropped or laid down carelessly. The drill is double insulated for increased safety. Supplied with: 1 x Bit Grease, 1 x Depth Stop, 2 x Side Handles and 1 x Carry Case. Specifications: Input Power: 1,350W.No Load Speed: 130-280/min.Impact Rate: 1,250-2,750/bpm.Impact Energy: 9.4 Joules.Capacity: Concrete 45mm, TCT Core 125mm.Weight: 9.0kg. Vibration Chiselling : 7.0 m/sec.Vibration Hammer Drilling : 7.5 m/sec.

GBP 899.99
1

Makita HR4511C SDS Max AVT Rotary Demolition Hammer 1350W 110V MAKHR4511CL

Makita HR4511C SDS Max AVT Rotary Demolition Hammer 1350W 110V MAKHR4511CL

The Makita HR4511C SDS Max AVT Rotary Demolition Hammer has 2 modes of operation: Rotary Hammer and Hammer only. It is fitted with an anti-vibration system for ultra-low vibration. It is also fitted with a padded, spring loaded, hinged rubberised grip and comes with 2 side handles for increased control.The hammer has a torque limiter so when drill hits reinforcement the torque limiter stops power and a recessed change lever mounted on top of machine to reduce breakage even if machine is dropped or laid down carelessly. The drill is double insulated for increased safety. Supplied with: 1 x Bit Grease, 1 x Depth Stop, 2 x Side Handles and 1 x Carry Case. Specifications: Input Power: 1,350W.No Load Speed: 130-280/min.Impact Rate: 1,250-2,750/bpm.Impact Energy: 9.4 Joules.Capacity: Concrete 45mm, TCT Core 125mm.Weight: 9.0kg. Vibration Chiselling : 7.0 m/sec.Vibration Hammer Drilling : 7.5 m/sec.

GBP 999.99
1

Makita HR3541FC SDS Max AVT Rotary Hammer 850W 110V MAKHR3541FCL

Makita HR3541FC SDS Max AVT Rotary Hammer 850W 110V MAKHR3541FCL

The Makita HR3541C Rotary Hammer is fitted with Anti-Vibration Technology for increased user protection. Fitted with a soft start and able to maintain constant speed under load, this machine is truly versatile. The torque limiter stops the drill when the bit hits against reinforcements and it has a built-in job light. It has 3-modes of operation rotary only, hammer only and rotary hammer. Supplied with a side handle, depth gauge, bit grease and a carry case. Specification Input Power 850W No Load Speed 315-630/min. Impact Rate 1,650-3,300/bpm Impact Energy 6.1 joules Capacity Concrete 35mm, Core Diameter (TCT) 90mm Weight 5.6kg All vibration figures quoted are Tri-axial to EN60745 2006. Vibration Drilling 2.5 m/sec Vibration Chiselling 12.5 m/sec Vibration Hammer Drilling 18 m/sec Vibration K Factor 1.5 m/sec Noise Sound Pressure 93 dB(A) Noise SoundPower 104 dB(A) Noise K Factor 3 dB(A) 1 x Makita HR3541FC SDS Max AVT Rotary Hammer 850W 110V Version

GBP 659.99
1

Makita HR3210FCT SDS Plus Rotary Hammer Drill with QC Chuck 850W 110V

Makita HR3210FCT SDS Plus Rotary Hammer Drill with QC Chuck 850W 110V

The Makita HR3210FCT SDS+ Rotary Hammer Drill with 3 drilling modes of operation: Rotary drilling, Hammer drilling or Chiseling. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling. It is fitted with a quick change chuck and an LED job light.It features the unique Makita AVT Anti Vibration Technology design employing the pneumatic pressure created in the drill s hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration. It is supplied with; a side handle, depth stop, bit grease and a carry case. Specifications: Input Power: 850 Watt.No Load Speed: 315-630/min.Impact Rate: 1,650-3,300/bpm.Impact Energy: 4.9 Joules.Capacity: Concrete: 32mm, Core Diameter (TCT): 90mm.Weight: 4.9kg. All vibration figures quoted are Tri-axial to EN60745 2006. Vibration Drilling: 2.5 m/sec.Vibration Chiselling: 7 m/sec.Vibration Hammer Drilling: 10 m/sec.Vibration K Factor: 1.5 m/sec.Noise Sound Pressure: 89 dB(A).Noise Sound Power: 100 dB(A).Noise K Factor: 3 dB(A).

GBP 599.99
1

Makita HR3540C SDS Max Rotary Hammer 850W 110V

Makita HR3540C SDS Max Rotary Hammer 850W 110V

The Makita HR3540C SDS Max Rotary Hammer provides 3 modes of operation: Rotary drilling, Hammer drilling or Chiseling.. With electronic power control for greater comfort and a torque-limiter for additional operator protection. The drill stops when the bit hits against reinforcements. The variable speed trigger helps to provide constant speed, even under load. It is fitted with an anti-vibration system for reduced vibration for less operator fatigue. Comes with: 1 x Side Handle, 1 x Depth Stop, 1 x Bit Grease and 1 x Carrying Case. Specification: Input Power: 850WNo Load Speed: 315-630/min.Impact Rate: 1,650-3,300/bpmImpact Energy: 5.6 joulesMax. Drilling In Concrete: 35mmMax. Core Diameter (TCT): 90mm Weight: 5.2kgMakita HR3540C SDS Max Rotary Hammer 110V version.

GBP 599.99
1

Makita 40VMAX Rotary Hammer 2X 2.5AHBATTS DC40RA Case

Makita 40VMAX Rotary Hammer 2X 2.5AHBATTS DC40RA Case

The HR003GZ01 is a cordless SDS-Plus Rotary Hammer with a 40V Li-ion XGT battery and a powerful 40V brushless motor. It operates at up to 980rpm, 5,000bpm, delivering 2.8 J of impact energy. Featuring variable speed control, constant speed control, and three operating modes (rotary only, rotary with hammer, and hammer only), it offers versatility for different tasks. The tool includes a one-touch sliding chuck for quick bit changes, reverse rotation, depth gauge for drilling consistency, and a torque limiter to stop rotation upon hitting reinforcements. With anti-vibration technology (AVT) and a "soft no load" function to reduce motor speed during idling, it minimizes vibrations. With drilling capacities of 13mm in steel, 32mm in wood, 28mm in concrete, 54mm with TCT core, and 65mm with diamond core, the HR003GZ01 is a compact and efficient rotary hammer for various applications. Features and Benefits Lightweight Can be connected to DX12 dust extraction system (not included) One touch sliding chuck Depth gauge for increased drilling consistency Twin LED job lights to illuminate the work area Anti-Vibration Technology (AVT)

GBP 699.99
1

Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850W 110V MAKHR3210CL

Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850W 110V MAKHR3210CL

The Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850 Watt with 3 drilling modes of operation: Rotary drilling, Hammer drilling or Chiseling. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling.It has a soft start operation to ensure a smooth and even start every time, and the torque limiter stops the drill when the bit hits against reinforcements. It also has a built in job light.It features the unique Makita AVT Anti-Vibration Technology design employing the pneumatic pressure created in the drill s hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration. It is supplied with; a side handle, depth stop, bit grease and a carry case. Input Power: 850W.No Load Speed: 315-630/min.Impact Rate: 1,650-3,300/bpm.Impact Energy: 5.0 joules.Capacity: Concrete 32mm, Core Diameter (TCT) 90mm.Weight: 4.9kg. All vibration figures quoted are Tri-axial to EN60745 2006. Vibration Drilling: 2.5 m/sec.Vibration Chiselling: 7 m/sec.Vibration Hammer Drilling: 10 m/sec.Vibration K Factor: 1.5 m/sec.Noise Sound Pressure: 89 dB(A).Noise Sound Power: 100 dB(A).Noise K Factor: 3 dB(A).

GBP 539.99
1

Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850W 240V MAKHR3210C

Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850W 240V MAKHR3210C

The Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850 Watt with 3 drilling modes of operation: Rotary drilling, Hammer drilling or Chiseling. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling.It has a soft start operation to ensure a smooth and even start every time, and the torque limiter stops the drill when the bit hits against reinforcements. It also has a built in job light.It features the unique Makita AVT Anti-Vibration Technology design employing the pneumatic pressure created in the drill s hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration. It is supplied with; a side handle, depth stop, bit grease and a carry case. Input Power: 850W.No Load Speed: 315-630/min.Impact Rate: 1,650-3,300/bpm.Impact Energy: 5.0 joules.Capacity: Concrete 32mm, Core Diameter (TCT) 90mm.Weight: 4.9kg. All vibration figures quoted are Tri-axial to EN60745 2006. Vibration Drilling: 2.5 m/sec.Vibration Chiselling: 7 m/sec.Vibration Hammer Drilling: 10 m/sec.Vibration K Factor: 1.5 m/sec.Noise Sound Pressure: 89 dB(A).Noise Sound Power: 100 dB(A).Noise K Factor: 3 dB(A).

GBP 539.99
1

Makita HR3210FCT SDS Plus Rotary Hammer Drill with QC Chuck 850W 240V MAKHR3210FCT

Makita HR3210FCT SDS Plus Rotary Hammer Drill with QC Chuck 850W 240V MAKHR3210FCT

The Makita HR3210FCT SDS+ Rotary Hammer Drill with 3 drilling modes of operation: Rotary drilling, Hammer drilling or Chiseling. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling. It is fitted with a quick change chuck and an LED job light.It features the unique Makita AVT Anti Vibration Technology design employing the pneumatic pressure created in the drill s hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration. It is supplied with; a side handle, depth stop, bit grease and a carry case. Specifications: Input Power: 850 Watt.No Load Speed: 315-630/min.Impact Rate: 1,650-3,300/bpm.Impact Energy: 4.9 Joules.Capacity: Concrete: 32mm, Core Diameter (TCT): 90mm.Weight: 4.9kg. All vibration figures quoted are Tri-axial to EN60745 2006. Vibration Drilling: 2.5 m/sec.Vibration Chiselling: 7 m/sec.Vibration Hammer Drilling: 10 m/sec.Vibration K Factor: 1.5 m/sec.Noise Sound Pressure: 89 dB(A).Noise Sound Power: 100 dB(A).Noise K Factor: 3 dB(A).

GBP 619.99
1

Makita HR4013C SDS Max Rotary Hammer with Avt 240V

Makita HR4013C SDS Max Rotary Hammer with Avt 240V

Makita HR4013C Rotary Hammer with SDS max and AVT, complete with carrying case, bit grease, depth rod and side handleThe Makita HR4013C was developed to provide higher operating efficiency and more comfort with unrivalled low level of vibration. Compared to the previous model HR4011C this machine gives 20% higher drilling efficiency and 45% higher chipping efficiency. With Rotary Hammer 4.5m/sec_ and Hammer 5.0m/sec_ vibration levels it makes this the worlds first 8 hour SDS-MAX rotary hammer.Features:One touch sliding chuck for easy bit installation and removalEasy to operate operation-mode change lever. Located on the top of the motor housing for reduced possibility of breakage"Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine bodyUnrivalled low level of vibration aided by vibration absorbing housingLED service light indicates when to replace carbon brushIn hammering mode, on/off switch is switchable between two switches to meet your application: For Continous or Intermittent chiseling applicationsComes with:Heavy duty carrying caseSide handleDepth stopGrease tubeClothSpecification:Impact energy: 8.0 JMax in concrete: 40 mmNo Load Speed: 250 - 500 rpmVibration - Chiselling: 4.5 m/sec_Vibration - Hammer Drilling: 5 m/sec_Vibration K factor: 1.5 m/sec_Impacts per minute: 1450 - 2900 ipmInput Wattage: 1000 wNet weight with pipes: 6.8 kg

GBP 849.99
1

Makita HR4013C SDS Max Rotary Hammer with Avt 110V

Makita HR4013C SDS Max Rotary Hammer with Avt 110V

Makita HR4013C Rotary Hammer with SDS max and AVT, complete with carrying case, bit grease, depth rod and side handleThe Makita HR4013C was developed to provide higher operating efficiency and more comfort with unrivalled low level of vibration. Compared to the previous model HR4011C this machine gives 20% higher drilling efficiency and 45% higher chipping efficiency. With Rotary Hammer 4.5m/sec_ and Hammer 5.0m/sec_ vibration levels it makes this the worlds first 8 hour SDS-MAX rotary hammer.Features:One touch sliding chuck for easy bit installation and removalEasy to operate operation-mode change lever. Located on the top of the motor housing for reduced possibility of breakage"Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine bodyUnrivalled low level of vibration aided by vibration absorbing housingLED service light indicates when to replace carbon brushIn hammering mode, on/off switch is switchable between two switches to meet your application: For Continous or Intermittent chiseling applicationsComes with:Heavy duty carrying caseSide handleDepth stopGrease tubeClothSpecification:Impact energy: 8.0 JMax in concrete: 40 mmNo Load Speed: 250 - 500 rpmVibration - Chiselling: 4.5 m/sec_Vibration - Hammer Drilling: 5 m/sec_Vibration K factor: 1.5 m/sec_Impacts per minute: 1450 - 2900 ipmInput Wattage: 1000 wNet weight with pipes: 6.8 kg

GBP 849.99
1

Makita HM0871C AVT SDS Max Demolition Hammer 1100W 110V MAKHM0871CL

Makita HM0871C AVT SDS Max Demolition Hammer 1100W 110V MAKHM0871CL

The Makita HM0871C AVT SDS Max Demolition Hammer is fitted with electronic speed control for maximum productivity and long life carbon brushes for maximum output. It has a hammer only action and has been developed for SDS-Max Bits. The tool is fitted with a variable speed trigger for more control and has been double insulated for added safety.It is also fitted with the unique AVT Anti Vibration Technology design. It works by employing the pneumatic pressure created in the drill's hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration. Specifications: Input Power: 1,100 Watt.Impact Rate: 1,100-2,650/bpm.Impact Energy: 7.6 Joules. Weight: 5.6kg. Vibration Chiselling: 8 m/sec.Vibration K Factor: 1.5 m/sec.Noise Sound Power: 97 dB(A).Noise Sound Pressure: 86 dB(A).Noise K factor: 3 dB(A).

GBP 509.99
1

Makita HM0871C AVT SDS Max Demolition Hammer 1100W 240V MAKHM0871C

Makita HM0871C AVT SDS Max Demolition Hammer 1100W 240V MAKHM0871C

The Makita HM0871C AVT SDS Max Demolition Hammer is fitted with electronic speed control for maximum productivity and long life carbon brushes for maximum output. It has a hammer only action and has been developed for SDS-Max Bits. The tool is fitted with a variable speed trigger for more control and has been double insulated for added safety.It is also fitted with the unique AVT Anti Vibration Technology design. It works by employing the pneumatic pressure created in the drill's hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration. Specifications: Input Power: 1,100 Watt.Impact Rate: 1,100-2,650/bpm.Impact Energy: 7.6 Joules. Weight: 5.6kg. Vibration Chiselling: 8 m/sec.Vibration K Factor: 1.5 m/sec.Noise Sound Power: 97 dB(A).Noise Sound Pressure: 86 dB(A).Noise K factor: 3 dB(A).

GBP 509.99
1

Makita DHR281ZJ BL LXT Rotary Hammer + QCC 36V (2 x 18V) Bare Unit

Makita DHR281ZJ BL LXT Rotary Hammer + QCC 36V (2 x 18V) Bare Unit

The Makita DHR281 Brushless LXT Rotary Hammer is powered by 2 x 18V Li-ion batteries in series (not supplied), to supply energy to the powerful 36V DC motor drive system. Supplied with a Quick Change Chuck for rotary-only drilling. It has a powerful brushless motor with a soft no load function that automatically reduces the motor speed during idling to suppress the vibration of the machine body. The variable speed is controlled by a trigger and it offers 3 operating modes: rotary only, rotary hammer and hammer only. Anti-vibration technology decreases fatigue during use. There is also an electric brake for added safety and an LED job light. Comes as a Bare Unit, No Battery or Charger. Specification: Modes: Rotary drilling, Hammer drilling or Chiseling.No Load Speed: 0-980/min.Impact Rate: 0-5,000/bpmImpact Energy: 2.8 joulesCapacity: Concrete 28mm, Concrete TCT Core 54mm, Concrete Diamond Core 65mm, Steel 13mm, Wood 32mmWeight: 4.0kg

GBP 459.99
1

Makita HR004GD201 XGT 40Vmax BL Rotary Hammer 40V 2 x 2.5Ah Li-ion

Makita HR004GD201 XGT 40Vmax BL Rotary Hammer 40V 2 x 2.5Ah Li-ion

The Makita HR004G XGT 40Vmax Rotary Hammer utilises anti-vibration technology to provide maximum control and comfort. It offers 3 modes of operation: Rotary Only, Rotary Hammer, Hammer Only. The brushless motor offers increased efficiency, whilst the built-in constant speed control and torque limiter provide increased control. Variable speed is controlled by the trigger and it also offers forward/reverse rotation. A 'Soft No Load' function automatically reduces the motor speed during idling to suppress the vibration of the machine body. For added user safety there is an electric brake and soft start feature. It also features an LED job light, ideal when working in dark areas. The XGT 40Vmax range is equipped with special electronics providing digital communication between tool, battery and charger. This allows the charger to provide the optimal charge to the battery depending on the status of the battery, whilst the tool can respond to the status of the battery by optimising performance to the battery level. Specifications: Tool Holder: SDS Plus.Modes: Rotary Only, Rotary Hammer, Hammer Only.No Load Speed: 0-980/min.Blows per Minute: 0-5,000/bpm.Impact Energy: 2.9 joules.Capacity: Concrete 28mm, TCT Core Concrete 54mm, Diamond Core Concrete 65mm, Steel 13mm, Wood 32mm.

GBP 1249.99
1

Makita HR4511C SDS Max Rotary Demolition Hammer Drill with Avt (110V)

Makita HR4511C SDS Max Rotary Demolition Hammer Drill with Avt (110V)

Makita HR4511C SDS Max Rotary Demolition Hammer Drill with AVT, complete with 2 side handles, depth stop, bit grease and carrying case This Demolition Hammer features Makita's Anti Vibration Technology which dramatically cuts down the amount of vibration being transferred to the operator resulting in much less user fatigue. This works with an internal balancer which is moved by the air pressure created inside the drill housing by the hammer action. The balancer moves in the oposite direction thus acting as a perfectly timed counterbalance. This technology coupled with the padded, spring loaded, hinged rubberised grip means the HR4511C is unleashing all it's power in a forward motion, enabling it to be used for long periods of time with little vibration transferral to hands and arms. Features: Reduced vibration for less operator fatigue (AVT) Torque-Limiter - when drill hits reinforcement the Torque-Limiter stops power 16 Angle Settings of Chisel Bit - for added control LED lights - Green drill is electrified and flashing Red signifies brushes needing changed Recessed Change Lever - mounted on top of machine to reduce breakage even if machine is dropped or laid down carelessly Constant speed underload. Rotary hammer action. Hammer only action - no hammering while idling for longer machine life Double insulated - for extra safety Comes with: 2 Side handles Depth stop Bit grease Carrying case Specification: Max in Concrete: 45mm Core Bit Diameter (TCT): 125mm Joules: 13Js Blows per minute: 1,250-2,750bpm No Load Speed: 130-280rpm Input wattage: 1,350w Vibration: 7.5m/sec HO.7.0m/sec D handle Tri-Axial Net Weight: 8.4kg

GBP 899.99
1

Makita HR4511C SDS Max Rotary Demolition Hammer Drill with Avt (240V)

Makita HR4511C SDS Max Rotary Demolition Hammer Drill with Avt (240V)

Makita HR4511C SDS Max Rotary Demolition Hammer Drill with AVT, complete with 2 side handles, depth stop, bit grease and carrying case This Demolition Hammer features Makita's Anti Vibration Technology which dramatically cuts down the amount of vibration being transferred to the operator resulting in much less user fatigue. This works with an internal balancer which is moved by the air pressure created inside the drill housing by the hammer action. The balancer moves in the oposite direction thus acting as a perfectly timed counterbalance. This technology coupled with the padded, spring loaded, hinged rubberised grip means the HR4511C is unleashing all it's power in a forward motion, enabling it to be used for long periods of time with little vibration transferral to hands and arms. Features: Reduced vibration for less operator fatigue (AVT) Torque-Limiter - when drill hits reinforcement the Torque-Limiter stops power 16 Angle Settings of Chisel Bit - for added control LED lights - Green drill is electrified and flashing Red signifies brushes needing changed Recessed Change Lever - mounted on top of machine to reduce breakage even if machine is dropped or laid down carelessly Constant speed underload. Rotary hammer action. Hammer only action - no hammering while idling for longer machine life Double insulated - for extra safety Comes with: 2 Side handles Depth stop Bit grease Carrying case Specification: Max in Concrete: 45mm Core Bit Diameter (TCT): 125mm Joules: 13Js Blows per minute: 1,250-2,750bpm No Load Speed: 130-280rpm Input wattage: 1,350w Vibration: 7.5m/sec HO.7.0m/sec D handle Tri-Axial Net Weight: 8.4kg

GBP 899.99
1

Makita HR5212C SDS Max Rotary Demolition Hammer 1510W 110V MAKHR5212CL

Makita HR5212C SDS Max Rotary Demolition Hammer 1510W 110V MAKHR5212CL

The Makita HR5212C Rotary Demolition Hammer has been developed to provide higher operating efficiency and more comfort with unrivalled low levels of vibration. It has 2 modes of operation, Rotary Hammer and Hammer only. It has a Soft No Load function that automatically reduces the motor speed during idling to suppress the vibration of the machine body. The HR5212C is fitted with AVT (Anti-Vibration Technology, vibration absorbing housing. The speed of drilling is easily controlled via the variable speed control dial and it offers constant speed control, even in difficult applications. The soft start and torque limiter prevent damage to the machine and the ergonomic soft grip provides comfort even in prolonged periods of use. It is fitted with a SDS Max, one touch sliding chuck for easy bit installation and removal and has a lock on mechanism for chiselling mode. The LED service and power warning lights, prevent unnecessary damage and tell you when parts need replacing. The machine is also compatible with a dust extractor attachment, not supplied. Specification Input Power 1,510W No Load Speed 150-310/min. Impact Rate 1,100-2,250/bpm Impact Energy 19.1 joules Shank SDS Max Capacity Concrete 52mm, Core Diameter (TCT) 160mm Weight 11.9kg Vibration K Factor 1.5 m/sec. Vibration Chiselling 8.0 m/sec. Vibration Hammer Drilling 9.0 m/sec.

GBP 1099.99
1

Makita HM0870C SDS Max Demolition Hammer 1100W 110V MAKHM0870CL

Makita HM0870C SDS Max Demolition Hammer 1100W 110V MAKHM0870CL

The Makita HM0870C SDS Max Demolition Hammer is fitted with electronic speed control for maximum productivity and long-life carbon brushes for maximum output. It has a hammer only action and has been developed for SDS Max Bits. The tool is fitted with a variable speed trigger for more control and has been double insulated for added safety. Supplied with: 1 x Bit Grease, 1 x Side Handle, 1 x Carry Case. Specifications: Input Power: 1,100W.Impact Rate: 1,100-2,650/bpm.Impact Energy: 7.6 joules.Weight: 5.1kg. All vibration figures quoted are Tri-axial to EN 60745 2006. Vibration Chiselling: 11m/sec.Vibration K Factor: 1.5m/sec.Noise Sound Power: 98 dBA.Noise Sound Pressure: 87 dBA.Noise K Factor: 3 dBA.

GBP 439.99
1

Makita HM0870C SDS Max Demolition Hammer 1100W 240V MAKHM0870C

Makita HM0870C SDS Max Demolition Hammer 1100W 240V MAKHM0870C

The Makita HM0870C SDS Max Demolition Hammer is fitted with electronic speed control for maximum productivity and long-life carbon brushes for maximum output. It has a hammer only action and has been developed for SDS Max Bits. The tool is fitted with a variable speed trigger for more control and has been double insulated for added safety. Supplied with: 1 x Bit Grease, 1 x Side Handle, 1 x Carry Case. Specifications: Input Power: 1,100W.Impact Rate: 1,100-2,650/bpm.Impact Energy: 7.6 joules.Weight: 5.1kg. All vibration figures quoted are Tri-axial to EN 60745 2006. Vibration Chiselling: 11m/sec.Vibration K Factor: 1.5m/sec.Noise Sound Power: 98 dBA.Noise Sound Pressure: 87 dBA.Noise K Factor: 3 dBA.

GBP 439.99
1

Makita HR003GD201 XGT 40Vmax Sds Plus BL Rotary Hammer 40V 2 x 2.5Ah Li-ion

Makita HR003GD201 XGT 40Vmax Sds Plus BL Rotary Hammer 40V 2 x 2.5Ah Li-ion

The Makita HR004G XGT 40Vmax Rotary Hammer utilises anti-vibration technology to provide maximum control and comfort. It offers 3 modes of operation: Rotary Only, Rotary Hammer, Hammer Only. The brushless motor offers increased efficiency, whilst the built-in constant speed control and torque limiter provide increased control. Variable speed is controlled by the trigger and it also offers forward/reverse rotation. A 'Soft No Load' function automatically reduces the motor speed during idling to suppress the vibration of the machine body. For added user safety there is an electric brake and soft start feature. It also features an LED job light, ideal when working in dark areas. The XGT 40Vmax range is equipped with special electronics providing digital communication between tool, battery and charger. This allows the charger to provide the optimal charge to the battery depending on the status of the battery, whilst the tool can respond to the status of the battery by optimising performance to the battery level. Specifications: Tool Holder: SDS Plus.Modes: Rotary Only, Rotary Hammer, Hammer Only.No Load Speed: 0-980/min.Blows per Minute: 0-5,000/bpm.Impact Energy: 2.9 joules.Capacity: Concrete 28mm, TCT Core Concrete 54mm, Diamond Core Concrete 65mm, Steel 13mm, Wood 32mm.

GBP 1129.99
1