23 results (0,22960 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Laser Wheel Stud Master Re-threader Kit

Laser Wheel Stud Master Re-threader Kit

Wheel stud master re-threader kit for use on vehicles that use wheel bolts For repairing damaged wheel stud threads internal and external on most passenger cars and light commercial vehicles.Size range: M12 x 1.25 (spare die Part No. 0052), M12 x 1.5 (spare die Part No. 0053), M14 x 1.5 (spare die Part No. 0054). For use on vehicles that use wheel bolts. Applications include: M12 x 1.25 for PSA; M12 x 1.5 for Mercedes-Benz & BMW; M12 x 1.75 for Volvo; & M14 x 1.5 for VAG models. Supplied with 3 spare O rings & grease (grease available separately - please see Laser Part No. 6380).

GBP 55.99
1

Laser Glow Plug Thread Repair Kit 33 Piece

Laser Glow Plug Thread Repair Kit 33 Piece

A set of repair taps and coils for repairing the threads and glow plugs on alloy cylinder heads. Re-threading kit for 8mm, 10mm, 12mm glow plugs.Manufactured from chrome vanadium with blackphosphate finish. Spares taps available: M8 x 1.0 (Part No. 2746), M10 x 1.0 (Part No. 2747), M10 x 1.25 (Part No. 2748), M12 x 1.0 (Part No. 2749), M12 x 1.25 (Part No. 2750), M14 x 1.25 (Part No. 2751). Spare thread kits available (all packs of 5): M8 x 1.0 (Part No. 2632), M10 x 1.0 (Part No. 2633), M10 x 1.25 (Part No. 2634), M12 x 1.25 (Part no. 2635).

GBP 149.99
1

Laser Metric Tap & Die Set 40 Piece

Laser Metric Tap & Die Set 40 Piece

Metric tap & die set, from M3 to M12 with two thread pitches per size, including die wrench, tap wrench, centre punch and thread pitch gauge. 17 taps & dies, sizes: M3 x 0.5, M3 x 0.6, M4 x 0.7, M4 x 0.75, M5 x 0.8, M5 x 0.9, M6 x 0.75, M6 x1.0, M7 x 1.0, M7 x 1.25, M8 x 1.0, M8 x 1.25, M10 x 1.25, M10 x 1.5, M12 x 1.5, M12 x 1.75, 1/8 NPT27.25mm die wrench 25mm, tap wrench (3 - 12mm). T-handle wrench, 3mm flat screwdriver, folding pitch gauge and centre punch. Brass wire brush for thread cleaning.

GBP 103.99
1

Laser Metric Tap & Die Set 110pc

Laser Metric Tap & Die Set 110pc

Professional quality metric tap and die set, featuring split dies, a comprehensive array of taps, three tap holders and two die holders. Taps are supplied in pairs, Taper Tap, and a Plug Tap. The Taper Tap has a gradual cutting action, due to the pronounced chamfer of the thread, making it suitable for starting a thread. The Plug Tap has far less of a chamfer and is used after the Taper Tap to get close to get to the bottom of the hole. Supplied in a blow mould storage case. Taps (2 of each) & dies, sizes: M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1.0, M7 x 0.75, M7 x 1.0, M8 x 0.75, M8 x 1.0, M8 x 1.25, M9 x 0.75, M9 x 1.0, M9 x 1.25, M10 x 0.75, M10 x 1.0, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1.0, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1.0, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1.0, M14 x 1.25, M14 x 1.5, M14 x 2.0, M16 x 1.0, M16 x 1.5, M16 x 2.0, M18 x 1.5.2 x adjustable tap holders M6 - M20 (1/4" - 3/4") & M3 - M12 (1/16" - 1/2"). T-bar tap holder; 2 x die holder 25mm (1") dia & 38mm (1 1/2" dia). Manufactured from alloy steel.

GBP 259.99
1

Laser Cylinder Leakage Tester 7 Bar (100psi)

Laser Cylinder Leakage Tester 7 Bar (100psi)

The 100psi (7 bar) working pressure ensures adequate air pressure and flow to all the sources of the compression loss plus the percentage loss to be measured. 100psi (7 Bar) working pressure shows the source of compression loss as well as the percentage loss via the dual gauges.3 x 25mm long adaptors: M10, M12, M14. 2 x 238mm long adaptors for deep seated plugs: M12, M14. Adaptor hose (300psi) for diesel injection adaptors (as supplied in Laser Part No. 4510) 470mm long and adaptor hose for spark plug testing on petrol engines 670mm long.

GBP 199.99
1

Laser Metric Tap & Die Set 51pc

Laser Metric Tap & Die Set 51pc

Metric tap & die set with split dies, from M6 to M24 with two thread pitches per size, including die wrench, tap wrench, centre punch, and screw extractor set. 20 x taps & dies, sizes:M6 x 0.75, M6 x 1.0, M8 x 1.0, M8 x 1.25, M10 x 1.25, M10 x 1.5, M12 x 1.5, M12 x 1.75, M14 x 1.5. M14 x 2.0, M16 x 1.5, M16 x 2.0, M18 x 1.5, M18 x 2.0, M20 x 1.5, M20 x 2.5, M22 x 1.5, M22 x 2.5, M24 x 1.5, M24 x 3.0.Sliding T-bar tap wrench and Tap Holder, Die Holder with large and small sleeves Automatic centre punch, screw extractor and 3mm flat screwdriver. Manufactured from alloy steel.

GBP 279.99
1

Laser Injection Rail Blanking Plugs - CRD

Laser Injection Rail Blanking Plugs - CRD

When working on Common Rail Diesel fuel systems it is essential to avoid dirt getting into the fuel system. It is important that the fuel rail is sealed off to prevent ingress of dirt and allow individual injectors to be blanked off to allow further diagnostic tests. Ideal for sealing off injector ports on the rail one by one to diagnose fuel system pressure loss.Internal thread and sealing cones: sizes 6 x M12 x 1.5mm & 6 x M14 x 1.5mm. Fits most common rail injection rail sizes. Essential kit for diesel fuel system high pressure diagnostics.

GBP 59.99
1

Laser 6092 Air Hammer Extractor

Laser 6092 Air Hammer Extractor

Air hammer extractor adaptor for the removal of diesel injectors/bushes. Allows effective transmission of impact force and vibration to any adaptor with a 5/8" thread. Offers an effective means of extraction of stuck injectors using relevant adaptor.For diesel injector extraction use this tool with Part Nos.: 4760 - Delphi/Bosch CR kit; 5128 - Bosch CR Dual Connection Adaptor; 6118 - Siemens M25; 6119 - Denso M20; 6120 - Siemens M27; 6121 - non CR M12 injectors; 6122 - Delphi M14; & 6123 - off-line adaptor. Recommended for use with the Laser Air Hammer (Part No. 6031). Made in Sheffield. EU Registered Design.

GBP 134.99
1

Laser Diesel Injector Extractor with Air Hammer & Adaptors

Laser Diesel Injector Extractor with Air Hammer & Adaptors

Diesel extractor and air hammer, supplied with diesel injector adaptors and accessories for removing most diesel injectors. Professional air hammer with variable speed trigger, built in power regulator and quick change chuck. 2200 blows per minute (bpm)/ stroke length 98mm with air hose size 3/8" ID, air inlet size 1/4 BSP, average air consumption 4.0cfm.Diesel injector extractor allows effective transmission of impact force and vibration to any adaptor with a 5/8" thread. Includes 7 diesel injector adaptors: Siemens (2), Denso, High Pressure M12, Delphi, M16 Denso, Bosch Dual Connector. Plus Valve Seat removal tool for Denso, off-line injector adaptor for access & a Bosch injector dismantling tool.

GBP 429.99
1

Laser Compression Tester - Diesel Engines

Laser Compression Tester - Diesel Engines

The Laser Diesel Engine Compression Test Kit is a comprehensive tool kit for checking the condition of diesel engines on most cars and small boats fitted with diesel engines. It tests for compression loss resulting from worn valves and valve seats, valve guides, piston rings, cylinder head and gasket seals. Applications include: BMW, Citron, Dacia, Daihatsu, Fiat, Ford, Isuzu, Land Rover, Leyland DAF, Mazda, Mercedes-Benz, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Seat, Toyota, Vauxhall, Volkswagen, Volvo.Dual scale pressure gauge: 0 - 1000psi (0-70 bar), with quick release connection system. Dummy injectors, seal and washer set, 90 degree elbow and clamp plate. M10, M12, M14 glow plug adaptors, plus a M20 diesel injector adaptor.

GBP 309.99
1

Laser Impact Spline Socket Bit Set 1/2"D 6 Piece

Laser Impact Spline Socket Bit Set 1/2"D 6 Piece

A set of six 1/2"D impact sockets in a range of sizes from M8 to M18. The low-profile is useful when clearance is limited and the bits are impact quality chrome molybdenum for use with air and power tools for the fast, safe adjustment of spline fasteners. The sizes are engraved on the sockets for easy identification and supplied in a rugged metal case with a fitted, foam insert to keep the sockets safe and organized. 1/2"D socket bits x 40mm long: M8, M10, M12, M14, M16, M18.Impact quality chrome molybdenum with anti-corrosion black phosphate finish. Low profile, ideal for adjusting spline fixings with limited clearance. Supplied in a metal case with fitted foam insert for convenient workshop storage.

GBP 43.99
1

Laser 4811 Slide Hammer 10LB

Laser 4811 Slide Hammer 10LB

A medium weight slide hammer with 5/8" UNF thread and 10lb sliding hammer which can be used with a variety of tools and for many applications including the removal of drive flanges, hubs, wheel bearing and diesel injectors etc. 10lb (4.5kg) steel hammer weight mounted on 500mm long steel shaft with a robust 5/8 UNF thread.For drive flange & hub removal, use with Laser Part No. 5649; for universal hub pulling, with Laser Part Nos. 5703 & 5550 (Ford Transit), Ideal for use with Laser Tools extensive range of diesel injector adaptors including Part Nos. 6118 (Siemens), 6119 (Denso), 6120 (Siemens), 6121 (M12), 6255 (Denso Piezo), 5128 (Bosch) & 4760 (Delphi & Bosch). For lighter hammer, please see Laser Part No. 5850 - 5lbs (2.2kg) slide hammer.

GBP 79.99
1

Laser Insulated Tool Kit 3/8"D 50 Piece

Laser Insulated Tool Kit 3/8"D 50 Piece

Complete set of fully insulated tools for live working up to 1000V AC / 1500V DC, featuring hex sockets, screwdrivers, pliers and insulation sleeves. 16 x 3/8"D sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 & 22mm; 2 extension bars: 150 & 250mm; 3/8"D ratchet; 3 spline bits: M8, M10, M12.Plier set: cable shears, bent nose pliers, long nose pliers, flat nose pliers, side cutters, water pump pliers and an insulated cable stripping knife. 10 x screwdrivers: Phillips Ph1 x 80mm, Ph2 x 100mm, Ph2 x 150mm; Flat 2.5 x 75mm, 3 x 100mm, 3.5 x 100mm; Torx* T20 x 100mm, T25 x 125mm, T30 x 150mm; circuit tester. 10 x protective 100mm sleeves: 5 x 18mm and 5 x 24mm.

GBP 559.99
1