10 results (0,13527 seconds)

Show all filters

Brand

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

9020185SB Plasticut Cutter for Hoses and Conduit (25mm Diameter)

9020185SB Plasticut Cutter for Hoses and Conduit (25mm Diameter)

Knipex PlastiCut Cutter for plastic pipes, plastic armoured pipes and hoses (also fabric reinforced) The Knipex 9020185SB (carded) PlastiCut Cutter has been designed for cutting thin-walled plastic pipes (armoured pipes) and hoses made of soft plastics and rubber (also fabric reinforced) up to an outer diameter of 25 mm. Thanks to the trapezoidal shape, the blade firstly cuts wedge-shaped into the material. The manual force initially acts on the tip of the blade and, during the cutting process, follows the shape of the material in a circular (radial) way from the inside out and onto the material. This prevents distortions as can arise when cutting using a conventional shearing action with two straight cutting edges. The trapezoidal shape has other benefits. Due to the exact positioning of the material in the hose and protective pipe cutter and the wedge-shaped blade, the pipe cutter automatically produces right-angled cuts. After cutting, no finishing (e.g. deburring) is required on the cut edges. Whether cutting plastic armoured pipes or fabric-reinforced hoses e.g. for compressed air: the effort required is low due to the favourable angle of entry of the blade. Little effort is needed because the material has already been cut into. The opening spring assumes the work of opening for the user during each cutting operation. The spring presses the handles apart and opens the shears while reducing manual force. This is a great advantage, especially during large projects with several work processes. A pawl is integrated for transport. The material to be cut is positioned and secured in the wide, half round support. The pipe cutter for hoses and protective pipes ensure the right-angled position of the material to the blade. This enables cuts to be made in quick sequence using the pipe cutter for hoses and protective pipes. Features: For cutting thin walled plastic pipes (conduit plastic pipes) and flexible hoses, also with fabric reinforcement, of plastic and rubber up to 25 mm / 1" Not suitable for cutting cables With opening spring and locking device Blades: special tool steel, oil-hardened, interchangeable Tool body: plastic, fibreglass-reinforced Specification: Part number: 9020185SB Head: chrome plated Handles: tough fibreglass reinforced plastic handles Dimensions: 185 x 70 x 25 mm Cutting capacities (diameter): 25 mm Cutting edge length: 25 mm Weight: 0.172kg

GBP 0.00
1

Knipex 7201160SB Diagonal Cutter for Plastics 160mm

Knipex 7201160SB Diagonal Cutter for Plastics 160mm

Knipex Diagonal Cutter for plastic and other soft materials such as lead The Knipex 7201160SB (carded) Diagonal Cutter is 160mm in length. With an opening spring to relieve strain on the user and a head manufactured from vanadium electric steel which has been forged and oil-hardened. The Knipex diagonal cutters have been specially developed for plastics and other soft materials. Their cutting edges are surface ground. The Cutter is used in plastics production when, for example, plastic moulded parts need to be mechanically separated from sprue after demoulding. The surface ground cutting faces permit the clean, flush disconnection of extruded plastic injection moulds and sprues or sprue residues. The sprue is cut off directly on the moulded part, because the cutting edge runs parallel to the component. In many cases, work steps in plastic injection moulding and other production processes repeat. Anyone who frequently separates sprues from moulded parts therefore appreciates the opening spring on the Knipex 72 01 160, because it saves an additional hand movement every time. At 160 mm long and weighing 164g, the Knipex diagonal cutters for plastics are compact enough for mobile use in production. They are designed for many years of hard use in industry. We forge the 72 01 160 diagonal cutters from vanadium electric steel. We give them their high strength by heating and then quenching them in oil. Features: Improved transmission ratio for 25 % more cutting performance Cutting face flush For nearly flush cutting of moulded plastic components from sprues Cuts soft materials such as lead in a flush cut With opening spring Vanadium electric steel; forged, oil-hardened Specification: Part number: 7201160SB Head: polished Handles; plastic coated Dimensions: 160 x 50 x 15 mm Weight: 0.164kg

GBP 0.00
1

Knipex TubiX XL Pipe Cutter 6-76mm KPX903103BK

Knipex TubiX XL Pipe Cutter 6-76mm KPX903103BK

Knipex TubiX XL Pipe Cutter with a spring-loaded QuickLock mechanism, holds the tool on the pipe once locked in place. Its cutting wheel is made of high-grade ball-bearing steel. High-quality needle-bearings enable the cutting wheel and four guide rollers to cut with ease. The lightweight and durable aluminium housing incorporates a removable, precision-ground deburring tool. It Is quick and easy to replace the cutting wheel, no tools required, a spare cutting wheel can be stored in the handle.

GBP 0.00
1

End Cutter (Counter Display of 10 x KPX6801200) KPX001801V10

End Cutter (Counter Display of 10 x KPX6801200) KPX001801V10

Knipex 00 18 01 V10 Counter Display containing 10 x KPX6801200 End Cutters which are ideal for twisting and cutting wire in one operation. They are fast, reliable and economical and will make light work of the toughest of job applications. The 68 01 series cutting pliers offer a long service life , with cutting edges hardened to approximately 61 HRC, these pliers will help make light work of annealed tie wire used to reinforce rods or braided reinforced concrete mesh. The Knipex 68 01 range of pliers are made from high-grade special tool steel, forged and then oil-hardened for reliability and durability. They have plastic moulded handles for added grip and user comfort. Size 200 mm (8in)

GBP 0.00
1

Knipex Wire Rope/Bowden Cable Cutter PVC Grip 190mm KPX9561190

Knipex Wire Rope/Bowden Cable Cutter PVC Grip 190mm KPX9561190

The Knipex 95 61 190 wire rope shears are ideal for medium-hard wire cables up to 7mm diameter without splaying, including those that are extremely strong, such as for example tyre cord. They also have two crimping dies for end caps on Bowden cable sheaths and end ferrules for traction cables and the blades are hardened to approximately 64HRC for added strength and durability Cutting head on the 95 61 190 are forged with polished head and handles plastic coated for added grip and a comfortable grip.

GBP 0.00
1

Knipex Pliers & Screwdriver Set in Tool Roll, 11 Piece KPX001941

Knipex Pliers & Screwdriver Set in Tool Roll, 11 Piece KPX001941

The Knipex 00 19 41 Tool Roll is suitable for telecommunications and electrical engineers. It is made of hard-wearing polyester fabric with a practical, adjustable quick release fastener. The pliers have chrome plated heads and two-colour dual component handles. The screwdrivers are VDE tested according to DIN EN/IEC 60900 1000V. Contains 1 x 03 05 Combination Plier 160mm 1 x 11 05 Insulation Wire Stripper 160mm 1 x 25 05 Snipe Nose Side Cutting Pliers 160mm 1 x 30 15 Long Nose Plier 160mm 1 x 30 35 Round Nose Plier 160mm 1 x 31 15 Needle Nose Plier 160mm 1 x 67 05 High Leverage End Cutter 140mm 1 x 70 05 Diagonal Cutter 140mm 2 x 98 20 Flat VDE Screwdrivers 2.5mm, 4.0mm 1 x 98 24 Phillips Screwdriver PH1 Open dimensions (L x H) 450 x 290mm.

GBP 0.00
1

Self-adjusting Insulation Stripper 0.03-10mm

Self-adjusting Insulation Stripper 0.03-10mm

Knipex Self-Adjusting Insulation Stripper used for single, multiple and fine stranded conductors with plastic or rubber insulating. Adapts automatically to the respective cable cross-section, preventing damage to the conductor. The cutting depth can be adjusted for different insulation materials. Use the wire cutter for copper and aluminium wires, multiple stranded up to 10.0 mmsup2; and single stranded up to 6.0 mmsup2;. Features a smooth operating mechanism, with stripping blades and clamping jaws that are easily replaceable. The body is made from reinforced plastic fibreglass so it is lightweight. The blade is made from special tool steel that is oil-hardened. For thin ribbon cables up to 13/32 inches width in a single pass. SpecificationSize: 200mm.Range of application: Conductors 0.00118 - 13/32 inchessup2;.Length stop: 3.0-18.0mm. Stripping capacities: 0.03-10.0 mmsup2;.Capacity AWG: 32 - 7.

GBP 0.00
1

Knipex Electronics Diagonal End Cutting Nippers Short Head 115mm KPX6442115

Knipex Electronics Diagonal End Cutting Nippers Short Head 115mm KPX6442115

These Knipex diagonal end cutting nippers are top quality precision pliers for ultra fine cutting work, in electronics and fine mechanics. There are 2 versions in the 64 range - a 120mm 15 Angled head, and a 115mm 27 Angled head. Both versions have precision shaped tips which are ideal for cutting close sitting soft wire up to 1.5mm in diameter. These Knipex electronic pliers are jointed with a stainless steel rivet for added strength and easy movement. The cutting edges are additionally induction hardened for durability and a longer life. These pliers have an extremely smooth, play-free joint with a stainless steel rivet for minimum operator fatigue. The handles are coated with soft plastic which is easy on the hand. Both models have precision-ground cutting edges for flush cutting and low friction double spring for gentle smooth closing and opening. The cutting edges are separately induction hardened to approximately 56HRc. They are made from special tool steel which is oil hardened for added strength and durability and have polished heads. Length 115mm. End oblique cutter, short head with small bevel 27 .

GBP 0.00
1

Knipex VDE Pliers Set in Case, 4 Piece KPX002015

Knipex VDE Pliers Set in Case, 4 Piece KPX002015

The Knipex 4 Piece 00 20 15 VDE Pliers Set contains a selection of the most popular VDE pliers. All pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. The slip guard prevents any spark over from the non-insulated head to the hand. The heads are chrome plated for durability. Supplied in a high-quality, shock-resistant plastic case. Contains the following 1 x 03 06 180 VDE Combination Pliers 180mm made from top-quality special tool steel, forged and oil-hardened to approximately 60 HRC for added strength and durability. It has longer cutting edges for thicker cables and gripping zones for flat and round materials. Cutting Capacity Hard 2.2mm, Medium Hard 3.4mm, Multi-Strand 12.0mm 1 x 26 16 200 VDE Snipe Nose Cutting Pliers 200mm made from vanadium electric steel, forged, multi-stage oil-hardened. The long half-round jaws are distortion-tolerant and feature elastic precision tips and knurled gripping surfaces with cutting edges for medium hard and hard wire. The cutting edges are additionally induction hardened, cutting edge hardness approx. 61 HRC. Ideal for all electrical installation applications. Cutting Capacity Hard 2.2mm, Medium 3.2mm 1 x 70 06 160 VDE Diagonal Cutter 160mm with a narrow head style for use in confined areas. Forged, vanadium electric steel, multi-stage oil-hardened. Precision cutting edges for soft and hard wire, additionally, induction hardened, approx. 62 HRC. Precision cutting edges for soft and hard wire. Provides clean cutting of thin copper wires, also at the cutting-edge tips. Cutting Capacity Hard 2.0mm, Medium 2.8mm, Soft 4.0mm 1 x 11 06 160 VDE Insulation Strippers 160mm made from special tool steel, forged, oil-hardened. Easy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nut. For stripping single, multiple and fine stranded conductors with plastic or rubber insulation.

GBP 0.00
1